CTRON-RATE-POLICING-MIB
AI MIB Summary
The CTRON-RATE-POLICING-MIB manages ingress traffic shaping on Enterasys CTRON switches by configuring maximum bandwidth limits per physical port and priority queue. This module enables granular Quality of Service (QoS) enforcement through rate policing policies that drop or remark packets exceeding defined thresholds.
The Enterasys Rate Policing MIB module allows the user to set maximum ingress rates on a per port, per priority basis.
Main OID:
ctRatePolicing.1.3.6.1.4.1.52.4.1.2.14.7
21
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
ctRatePolicingThe Enterasys Rate Policing MIB module allows the user to set maximum ingress rates on a per port, per priority basis. MODULE-IDENTITY .1.3.6.1.4.1.52.4.1.2.14.7 |
ctRatePolicingObjects OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.14.7.1 |
ctRatePolicingAdminStatusAllows the rate policing feature to be globally enabled/disabled. A value of disable(2), functionally supersedes the ctRatePolicingRuleStatus of individual entries in the ctRatePolicingConfigTable, but does not change their actual values.rw Enumeration .1.3.6.1.4.1.52.4.1.2.14.7.1.1 |
ctRatePolicingConfigLastChangeThe value of sysUpTime the last time anything in the ctRatePolicingConfigTable changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.2.14.7.1.2 |
ctRatePolicingConfigTableThis table allows configuration of rate policing rules on this device. Their are a limited number of resources available for rate policing, and this directly limits the number of rate policing rules that may be configured on each port. As a result this table does not support dynamic row creation, rather, all possible rows exist in either an active or disabled state. A manager application should not, however, infer that this configuration is necessarily fixed during the lifetime of the managed entity. The allocation of resources could theoretically be shifted. For example port 20 could have 3 resources and at some point suddenly have 4 or 2. Any such change would of course cause the value of ctRatePolicingConfigLastChange to change. At this time their is no defined mechanism to move these resources and there very likely never will be. This is merely a warning that manager applications should not count on this. SEQUENCE OF CtRatePolicingConfigEntry .1.3.6.1.4.1.52.4.1.2.14.7.1.3 |
ctRatePolicingConfigEntryDescribes a particular entry of ctRatePolicingConfigTable. CtRatePolicingConfigEntry .1.3.6.1.4.1.52.4.1.2.14.7.1.3.1 |
ctRatePolicingResourceIndexThis specifies a unique resource available for configuring a rate policing rule on this port. Each port has a limited number of resources available for rate policing. This index simply provides a mechanism for uniquely addressing each of these resources. INTEGER .1.3.6.1.4.1.52.4.1.2.14.7.1.3.1.1 |
ctRatePolicingActionsAllowedThis specifies the valid policing actions that may be taken for this port upon exceeding the threshold specified in ctRatePolicingThreshHold.ro CtRatePolActionList .1.3.6.1.4.1.52.4.1.2.14.7.1.3.1.2 |
ctRatePolicingActionThis is the action to be taken if the rate limit is exceeded. This value must be a valid action as specified by the corresponding ctRatePolicingActionsAllowed object. Also, no more than one action may be specified. Attempts to set this value outside of the aforementioned guidelines will fail.rw CtRatePolActionList .1.3.6.1.4.1.52.4.1.2.14.7.1.3.1.3 |
ctRatePolicingThreshHoldMinThe minimum rate limit value for this entry in kB per second.ro Integer32 .1.3.6.1.4.1.52.4.1.2.14.7.1.3.1.4 |
ctRatePolicingThreshHoldThe rate limit value for this entry in kB per second. If the rate is exceeded the defined action in ctRatePolicingAction will be enforced. This value may not be set below the minimum rate specified in ctRatePolicingThreshHoldMin.rw Integer32 .1.3.6.1.4.1.52.4.1.2.14.7.1.3.1.5 |
ctRatePolicingPriorityListThis specifies the list of priorities to which this rule applies.rw CtPriList .1.3.6.1.4.1.52.4.1.2.14.7.1.3.1.6 |
ctRatePolicingRuleStatusThis object provides both control and status for the associated conceptual row in the table. The value of active(1) indicates that device is actively applying the rate policing rule defined by the other leaves in this row. All other read-write leaves in this row have an effective value of read-only while the row is in the active state. The value of disabled(2) indicates that this row is essentially an available resource which MAY be configured and activated.rw Enumeration .1.3.6.1.4.1.52.4.1.2.14.7.1.3.1.7 |
ctRatePolicingActionsTakenThis object counts the number of times the ctRatePolicingAction has been enforced for this particular entry.ro Integer32 .1.3.6.1.4.1.52.4.1.2.14.7.1.3.1.8 |
ctRatePolicingDirectionsAllowedThis specifies the valid policing directions that may be taken for this port.ro CtRatePolDirectionList .1.3.6.1.4.1.52.4.1.2.14.7.1.3.1.9 |
ctRatePolicingDirectionThis specifies the direction of the traffic flow that will be limited.rw CtRatePolDirectionList .1.3.6.1.4.1.52.4.1.2.14.7.1.3.1.10 |
ctRatePolicingConformance OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.14.7.2 |
ctRatePolicingGroups OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.14.7.2.1 |
ctRatePolicingConfigGroupA collection of objects providing device level control and status information for rate policing. Unknown .1.3.6.1.4.1.52.4.1.2.14.7.2.1.1 |
ctRatePolicingCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.14.7.2.2 |
ctRatePolicingComplianceThe compliance statement for devices that support rate policing. Unknown .1.3.6.1.4.1.52.4.1.2.14.7.2.2.1 |