CTRON-IPX-ROUTER-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
435
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
435 total| Object Name |
|---|
nwIpxRouter OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2 |
IMPORTS Unknown .1.3.6.1.4.1.52.4.2.2.2.3.2 |
nwIpxMibs OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.1 |
nwIpxMibRevTextIndicates the current revision level of the IPX MIB in textual
format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.2.1.1 |
nwIpxComponents OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2 |
nwIpxSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.1 |
nwIpxSysConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.1.1 |
nwIpxSysRouterIdThe IPX Address used to uniquely identify the host (device) running
IPX Routing Services. The value of nwIpxSysRouterId is equal to the
highest IPX address assigned in the IPX Address Table.rw IpxAddress .1.3.6.1.4.1.52.4.2.2.2.3.2.2.1.1.1 |
nwIpxSysAdministration OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.1.2 |
nwIpxSysAdminStatusSets the administrative state of IPX Routing Services system-wide.
Enabled (3) causes IPX Routing Services to become active on all router
ports configured and enabled for IPX Routing Services. Disabled (2)
causes IPX routing services to become inactive system-wide.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.1.2.1 |
nwIpxSysOperStatusIndicates the operating condition of IPX Routing Services system-wide.
The value of nwIpxSysOperStatus indicates any problem with your IPX
Routing Services configuration. A value of 6 indicates that regardless
of the value of nwIpxSysAdminStatus, IPX Routing Services is not
operating because of an invalid configuration.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.1.2.2 |
nwIpxSysAdminResetResets IPX Routing Services system-wide. Reset (2) forces a restart
of IPX Routing Services without a graceful shutdown on any active
router ports and without affecting any other routing services.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.1.2.3 |
nwIpxSysOperationalTimelIndicates the elapsed time, in hundredths of a second, that
nwIpxSysOperStatus has been in its current administrative state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.1.2.4 |
nwIpxSysVersionIndicates the current revision level of the IPX Routing Services
firmware in textual format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.1.2.5 |
nwIpxForwarding OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2 |
nwIpxFwdSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1 |
nwIpxFwdCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1 |
nwIpxFwdCtrAdminStatusSets the administrative state of the aggregate (system-wide) IPX
packet and byte counters. Enabled (3) causes these counters to become
active. Disabled (2) causes these counters to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.1 |
nwIpxFwdCtrResetResets the aggregate (system-wide) IPX packet and byte counters.
Reset (2) resets the IPX aggregate counters to 0.
nwIpxFwdCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.2 |
nwIpxFwdCtrOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxFwdCtrAdminStatus has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.3 |
nwIpxFwdCtrInPktsIndicates the total number of IPX packets that have been received,
system-wide, during nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.4 |
nwIpxFwdCtrOutPktsIndicates the total number of IPX packets that have been transmitted,
system-wide, during nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.5 |
nwIpxFwdCtrFwdPktsIndicates the total number of IPX packets that have been forwarded,
system-wide, during nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.6 |
nwIpxFwdCtrFilteredPktsIndicates the total number of IPX packets that have been
administratively filtered, system-wide, during
nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.7 |
nwIpxFwdCtrDiscardPktsIndicates the total number of IPX packets that have been discarded,
system-wide, during nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.8 |
nwIpxFwdCtrAddrErrPktsIndicates the total number of IPX packets that have been discarded,
system-wide, during nwIpxFwdCtrOperationalTime, because of addressing
errors in the IPX header.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.9 |
nwIpxFwdCtrLenErrPktsIndicates the total number of IPX packets that have been discarded,
system-wide, during nwIpxFwdCtrOperationalTime, because an invalid
packet length is contained in the IPX header.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.10 |
nwIpxFwdCtrHdrErrPktsIndicates the total number of IPX packets that have been discarded,
system-wide, during nwIpxFwdCtrOperationalTime, because of an invalid
IPX header.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.11 |
nwIpxFwdCtrInBytesIndicates the total number of bytes in the IPX packets that have
been received, system-wide, during nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.12 |
nwIpxFwdCtrOutBytesIndicates the total number of bytes in the IPX packets that have
been transmitted, system-wide, during nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.13 |
nwIpxFwdCtrFwdBytesIndicates the total number of bytes in the IPX packets that have
been forwarded, system-wide, during nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.14 |
nwIpxFwdCtrFilteredBytesIndicates the total number of bytes in the IPX packets that have
been administratively filtered, system-wide, during
nwIpxFwd-CtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.15 |
nwIpxFwdCtrDiscardBytesIndicates the total number of bytes in the IPX packets that have
been discarded, system-wide during nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.16 |
nwIpxFwdCtrHostInPktsIndicates the total number of IPX packets that have been successfully
delivered to the local host, during nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.17 |
nwIpxFwdCtrHostOutPktsIndicates the total number of IPX packets that have been transmitted
by the local host, during nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.18 |
nwIpxFwdCtrHostDiscardPktsIndicates the total number of IPX packets that have been discarded
by the local host, during nwIpxFwdCtrOperationalTime, due to a lack of
host resources.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.19 |
nwIpxFwdCtrHostInBytesIndicates the total number of bytes in the IPX packets that have
been received by the local host, during nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.20 |
nwIpxFwdCtrHostOutBytesIndicates the total number of bytes in the IPX packets that have
been transmitted by the local host, during
nwIpxFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.21 |
nwIpxFwdCtrHostDiscardBytesIndicates the total number of bytes in the IPX packets that have
been discarded by the local host, during nwIpxFwdCtrOperationalTime
due to a lack of host resources.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.1.1.22 |
nwIpxFwdInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2 |
nwIpxFwdIfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1 |
nwIpxFwdIfTableThis table contains an entry for each router port. This table is
indexed by nwIpxFwdIfIndex, which indicates the value of MIB2
ifIndex, which identifies the router port for which the entry exists. SEQUENCE OF NwIpxFwdIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1 |
nwIpxFwdIfEntryEach entry specifies the IPX Routing Services configuration for the
router port for which the entry exists. NwIpxFwdIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1 |
nwIpxFwdIfIndexIndicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.1 |
nwIpxFwdIfAdminStatusSets the administrative state of IPX Routing Services on the router
port for which the entry exists. Enabled (3) causes IPX Routing
Services to become active. Disabled (2) causes it to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.2 |
nwIpxFwdIfOperStatusIndicates the current operating condition of IPX Routing Services on
the router port for which the entry exists. The value of
nwIpxFwdIfOperStatus indicates any problem with the configuration of
IPX Routing Services on the router port. A value of 6 indicates that
regardless of the state of nwIpxFwdIfAdminStatus IPX Routing Services
is not operating because of an invalid port-level configuration.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.3 |
nwIpxFwdIfOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxFwdIfOperStatus has been in its current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.4 |
nwIpxFwdIfControlThis object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific MIBs.
Setting this object has no effect.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.5 |
nwIpxFwdIfMtuSpecifies the Maximum Transmission Unit (MTU) for IPX packets on the
router port for which the entry exists. This includes the IPX header
and data but does not include framing.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.6 |
nwIpxFwdIfForwardingControls forwarding of IPX packets on the router port for which the
entry exists. Enabled (3) causes IPX packets to be forwarded. Disabled
(2) prevents IPX packets from being forwarded.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.7 |
nwIpxFwdIfFrameTypeSpecifies the framing type for IPX packets forwarded on the router
port for which the entry exists. Some frame types are valid for
specific media types. The comments reflect those valid media types.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.8 |
nwIpxFwdIfAclIdentifierSpecifies the Access Control ID of the Access Control List in effect
for IPX packets being routed on the router port for which the entry
exists. A value of 0 indicates that no Access Control List is in
effect.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.9 |
nwIpxFwdIfAclStatusControls the operation of any Access Control List configured for IPX
traffic on the router port for which the entry exists. Enabled (3)
applies the Access Control List indicated by the value of
nwIpxFwdIfAclIdentifier to all IPX traffic being routed to the port.
Disabled (2) prevents the Access Control List from being applied.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.10 |
nwIpxFwdIfCacheControlControls IPX Address caching on the router port for which the entry
exists. When IPX Address caching is enabled, IPX Addresses used for
address validation, filtering, and forwarding are stored in the cache.
This cache is checked first before doing a full route table lookup,
which speeds up the switching process. Enabled (3) turns on IPX
Address caching. Disabled (2) turns it off.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.11 |
nwIpxFwdIfCacheEntriesIndicates the number of entries in the IPX Address cache on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.12 |
nwIpxFwdIfCacheHitsIndicates the number of times entries in the IPX Adddress cache have
been used to provide the IPX Address required to validate, filter, or
forward an IPX packet on the router port.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.13 |
nwIpxFwdIfCacheMissesIndicates the number of times the IPX Address required to validate,
filter, or forward an IPX packet on the router port was not found in
the IPX Address cache.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.14 |
nwIpxAddressTableThis table contains an entry for each Novell network address assigned
to each router port. SEQUENCE OF NwIpxAddrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2 |
nwIpxAddrEntryEach entry specifies the Novell network addressing information for
the logical Novll network for which the entry exists. NwIpxAddrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1 |
nwIpxAddrIfIndexIndicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.1 |
nwIpxAddrIfAddressThis is the Novell network number assigned to the logical Novell
network for which the entry exists. The IpxAddress consists of a
network number of 4 octets.ro IpxAddress .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.2 |
nwIpxAddrIfControlSet this object to add or delete this entry from the table.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.3 |
nwIpxAddrIfAddrTypeSpecifies whether the Novell network number, nwIpxAddrIfAddress, is
the primary or secondary address for the router port.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.4 |
nwIpxFwdIfCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2 |
nwIpxFwdIfCtrTableThis table contains an entry for each router port configured and
enabled for IPX Routing Services. SEQUENCE OF NwIpxFwdIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1 |
nwIpxFwdIfCtrEntryEach entry indicates the current packet and byte count of IPX packets
on the port for which the entry exists. NwIpxFwdIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1 |
nwIpxFwdIfCtrIfIndexIndicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.1 |
nwIpxFwdIfCtrAdminStatusSets the administrative state of the per-port IPX packet and byte
counters on the router port for which the entry exists. Enabled (3)
causes these counters to become active. Disabled (2) causes these
counters to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.2 |
nwIpxFwdIfCtrResetResets the per-port IPX packet and byte counters on the router port
for which this entry exists. Reset (2) resets the counters to 0.
nwIpxFwdIfCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.3 |
nwIpxFwdIfCtrOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxFwdIfCtrAdminStatus has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.4 |
nwIpxFwdIfCtrInPktsIndicates the total number of IPX packets that have been received,
during nwIpxFwdIfCtrOperationaltime, on the router port for which the
entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.5 |
nwIpxFwdIfCtrOutPktsIndicates the total number of IPX packets that have been transmitted,
during nwIpxFwdIfCtrOperationalTime, on the router port for which the
entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.6 |
nwIpxFwdIfCtrFwdPktsIndicates the total number of IPX packets that have been forwarded,
during nwIpxFwdIfCtrOperationalTime, on the router port for which the
entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.7 |
nwIpxFwdIfCtrFilteredPktsIndicates the total number of IPX packets that have been
administratively filtered, during nwIpxFwdIfCtrOperationalTime, on
the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.8 |
nwIpxFwdIfCtrDiscardPktsIndicates the total number of IPX packets that have been discarded
(dropped), during nwIpxFwdIfCtrOperationalTime, on the router port for
which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.9 |
nwIpxFwdIfCtrAddrErrPktsIndicates the total number of IPX packets that have been discarded
because of IPX addressing errors in the IPX header, during
nwIpxFwdIfCtrOperationalTime, on the router port for which the entry
exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.10 |
nwIpxFwdIfCtrLenErrPktsIndicates the total number of IPX packets that have been discarded
because an invalid packet length was contained in the IPX header,
during nwIpxFwdIfCtrOperationalTime, on the router port for which the
entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.11 |
nwIpxFwdIfCtrHdrErrPktsIndicates the total number of IPX packets that have been discarded
because of an invalid IPX header, during nwIpxFwdIfCtrOperationalTime,
on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.12 |
nwIpxFwdIfCtrInBytesIndicates the total number of bytes in the IPX packets that have
been received, during nwIpxFwdIfCtrOperationalTime, on the router
port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.13 |
nwIpxFwdIfCtrOutBytesIndicates the total number of bytes in the IPX packets that have
been transmitted, during nwIpxFwdIfCtrOperationalTime, on the router
port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.14 |
nwIpxFwdIfCtrFwdBytesIndicates the total number of bytes in the IPX packets that have
been forwarded, during nwIpxFwdCtrOperationalTime, on the router port
for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.15 |
nwIpxFwdIfCtrFilteredBytesIndicates the total number of bytes in the IPX packets
administratively filtered, during nwIpxFwdIfCtrOperationalTime, on
the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.16 |
nwIpxFwdIfCtrDiscardBytesIndicates the total number of bytes in the IPX packets that have
been discarded, during nwIpxFwdIfCtrOperationalTime, on the router
port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.17 |
nwIpxFwdIfCtrHostInPktsIndicates the total number of IPX packets that have been successfully
delivered to the local host, during nwIpxFwdIfCtrOperationalTime, that
were received on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.18 |
nwIpxFwdIfCtrHostOutPktsIndicates the total number of IPX packets that have been forwarded
by the local host, during nwIpxFwdIfCtrOperationalTime, on the router
port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.19 |
nwIpxFwdIfCtrHostDiscardPktsIndicates the total number of IPX packets that have been discarded
by the local host, due to a lack of host resources, during
nwIpxFwdIfCtrOperationalTime, that were received on the router port
for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.20 |
nwIpxFwdIfCtrHostInBytesIndicates the total number of bytes in the IPX packets that have been
successfully delivered to the local host, during
nwIpxFwdIfCtrOperationalTime, that were received on the router port for
which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.21 |
nwIpxFwdIfCtrHostOutBytesIndicates the total number of bytes in the IPX packets that have been
transmitted by the local host, during nwIpxFwdIfCtrOperationalTime, on
the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.22 |
nwIpxFwdIfCtrHostDiscardBytesIndicates the total number of bytes in the IPX packets that have
been discarded by the local host, due to a lack of host resources
that were received, during nwIpxFwdIfCtrOperationalTime, that were
received on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.23 |
nwIpxTopology OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4 |
nwIpxDistanceVector OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1 |
nwIpxRip OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1 |
nwIpxRipSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1 |
nwIpxRipConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.1 |
nwIpxRipAdminStatusSets the administrative state of the IPX-RIP routing protocol
system-wide. Enabled (3) causes IPX-RIP to become active on all router
ports configured and enabled for IPX Routing Services. Disabled (2)
causes IPX-RIP to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.1.1 |
nwIpxRipOperStatusIndicates the current operating condition of IPX-RIP system-wide.
The value of nwIpxRipOperStatus indicates any problem with your
IPX-RIP configuration. A value of 6 indicates that regardless of the
value of nwIpxRipAdminStatus, IPX-RIP is not operating because of an
invalid configuration.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.1.2 |
nwIpxRipAdminResetResets the IPX-RIP routing protocol. Reset (2) forces a system-wide
restart of IPX-RIP, without a graceful shutdown on any active router
ports.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.1.3 |
nwIpxRipOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxRipOperStatus has been in its current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.1.4 |
nwIpxRipVersionIndicates the current revision level of the IPX-RIP routing protocol
firmware, in textual format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.1.5 |
nwIpxRipStackSizeSpecifies the stack size of the IPX-RIP routing protocol thread. In
order for a change of this value to take effect, the protocol
(nwIpxRipAdminReset), IPX Routing Services (nwIpxSysAdminReset), or
the device running Routing Services must be reset.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.1.6 |
nwIpxRipThreadPrioritySpecifies the run-time execution priority of the IPX-RIP routing
protocol thread. In order for a change of this value to take effect,
IPX-RIP (nwIpxRipAdminReset), IPX Routing Services (nwIpxAdminReset),
or the device running Routing services must be reset.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.1.7 |
nwIpxRipDatabaseThresholdSpecifies the run-time maximum number of IPX-RIP entries that can
be held in the IPX-RIP route table.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.1.8 |
nwIpxRipAgeOutSpecifies the amount of time, in seconds, that an inactive route
table entry remains in the IPX-RIP route table before it is aged-out.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.1.9 |
nwIpxRipHoldDownSpecifies the amount of time, in seconds, to wait before removing
an entry from the route table, after receiving an update indicating
that the destination has become unreachable. All routers exchanging
IPX-RIP information must have the same hold down time. The time must
be long enough to allow all participating routers to receive the same
update.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.1.10 |
nwIpxRipCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2 |
nwIpxRipCtrAdminStatusSets the administrative state of the aggregate system-wide IPX-RIP
packet and byte counters. Enabled (3) causes these counters to become
active on all router ports. Disabled (2) causes these counters to
become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2.1 |
nwIpxRipCtrResetResets the aggregate system-wide IPX-RIP protocol packet and byte
counters. Reset (2) resets the IPX-RIP aggregate counters to 0.
nwIpxRipCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2.2 |
nwIpxRipCtrOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxRipCtrAdminStatus has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2.3 |
nwIpxRipCtrInPktsIndicates the total number of IPX-RIP packets that have been
received, system-wide, during nwIpxRipCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2.4 |
nwIpxRipCtrOutPktsIndicates the total number of IPX-RIP packets that have been
transmitted, system-wide, during nwIpxRipCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2.5 |
nwIpxRipCtrFilteredPktsIndicates the total number of IPX-RIP packets that have been
administratively filtered, system-wide, during`
nwIpxRipCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2.6 |
nwIpxRipCtrDiscardPktsIndicates the total number of IPX-RIP packets that have been
discarded, system-wide, during nwIpxRipCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2.7 |
nwIpxRipCtrInBytesIndicates the total number of bytes in the IPX-RIP packets that
have been received, system-wide, during nwIpxRipCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2.8 |
nwIpxRipCtrOutBytesIndicates the total number of bytes in the IPX-RIP packets that have
been transmitted, system-wide, during nwIpxRipCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2.9 |
nwIpxRipCtrFilteredBytesIndicates the total number of bytes in the IPX-RIP packets that have
been administratively filtered, system-wide, during
nwIpxRipCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2.10 |
nwIpxRipCtrDiscardBytesIndicates the total number of bytes in the IPX-RIP packets that have
been discarded, during nwIpxRipCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.1.2.11 |
nwIpxRipInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2 |
nwIpxRipIfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1 |
nwIpxRipIfTableThis table contains an entry for each router port. Each entry can
contain different values, allowing the routing protocol configuration
to vary from router port to router port. This table is indexed by
nwIpxRipIfIndex, which indicates the value of MIB 2 ifindex, which
identifies the router port for which each entry exists. SEQUENCE OF NwIpxRipIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1 |
nwIpxRipIfEntryEach entry contains the IPX-RIP configuration for the router port for
which the entry exists. NwIpxRipIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1 |
nwIpxRipIfIndexIndicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.1 |
nwIpxRipIfAdminStatusSets the administrative state of the IPX-RIP routing protocol on the
router port for which the entry exists. Enabled (3) causes IPX-RIP to
become active on the router port. Disabled (2) causes RIP to become
inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.2 |
nwIpxRipIfOperStatusIndicates the current operating condition of the IPX-RIP routing
protocol on the router port for which the entry exists. The value of
nwIpxRipIfOperStatus indicates any problem with your IPX-RIP
configuration on the router port. A value of 6 indicates that
regardless of the value of nwIpxRipIfAdminStatus, IPX-RIP is not
operating on the router port because of an invalid configuration.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.3 |
nwIpxRipIfOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxRipIfOperStatus has been in its current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.4 |
nwIpxRipIfVersionIndicates the revision level of the IPX-RIP routing protocol in
textual format.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.5 |
nwIpxRipIfAdvertisementSets the interval, in seconds, at which IPX-RIP advertises its route
table on the router port for which the entry exists. Change this value
to cause IPX-RIP to advertise its route table more or less frequently.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.6 |
nwIpxRipIfFloodDelaySpecifies the length of time, in seconds, that the IPX-RIP routing
protocol will wait after discovering that a directly connected route
has gone down, before flooding updates (triggered updates) on the
router port for which the entry exists. A value of 0 specifies that
if a directly connected route goes down, updates will be sent
immediately.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.7 |
nwIpxRipIfRequestDelaySpecifies the length of time, in seconds, that the IPX-RIP routing
protocol will wait after receiving a route request packet before
sending a response on the router port for which the entry exists. A
value of 0 specifies that if a route request packet is received on
the port, a response will be sent immediately.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.8 |
nwIpxRipIfPriorityThis object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific MIBs.
Setting this object has no effect.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.9 |
nwIpxRipIfHelloTimerThis object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific
MIBs. Setting this object has no effect.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.10 |
nwIpxRipIfSplitHorizonControls the operation of Split Horizon on the router port for which
the entry exists. When Split Horizon is enabled, IPX-RIP keeps track
of which router port route information is received on, and prevents
information about a route from being sent back out the same router
port it was received on.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.11 |
nwIpxRipIfPoisonReverseControls the operation of Poison Reverse on the router port for
which the entry exists. When Poison Reverse is enabled, IPX-RIP
advertises any downed route as unreachable during the period of time
that it must wait (nwIpxRipHoldDown) before removing the route from
the route table.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.12 |
nwIpxRipIfSnoopingControls the operation of IPX-RIP Snooping on the router port. When
RIP Snooping is enabled the IPX-RIP routing protocol operates in
passive mode, so that it receives route information, builds and
maintains a route table, but does not advertise or send updates on
the router port for which the entry exists.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.13 |
nwIpxRipIfTypeIndicates whether the directly connected network segment does or
does not support broadcast media access. If broadcast media access is
supported, IPX-RIP advertisements are sent out one broadcast packet
per router port. If broadcast media access is not supported, IPX-RIP
advertisements are sent to each neighbor directly.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.14 |
nwIpxRipIfXmitCostThis object does not apply to this protocol. It is a common object,
inherited from the common MIB framework used to provide a common
management interface to all the Cabletron Routing Services
protocol-specific MIBs. Setting this object has no effect.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.15 |
nwIpxRipIfAclIdentifierSpecifies the Access Control ID of the access control list in effect
for IPX-RIP routing protocol packets on the router port for which the
entry exists. A value of 0 indicates that there is no access control
list in effect for IPX-RIP routing protocol packets on the router
port.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.16 |
nwIpxRipIfAclStatusControls the operation of the access control list identified by
nwIpxRipIfAclIdentifier. Enabled (3) applies the access control list
to all IPX-RIP routing protocol packet traffic on the router port for
which the entry exists. Disabled (2) prevents the access control list
from being applied.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.17 |
nwIpxRipIfCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2 |
nwIpxRipIfCtrTableThis table contains an entry for each router port.This table is
indexed by nwIpxRipIfCtrIfIndex, which indicates the value of MIB2
ifindex, which indentifies the router port for which the entry exists. SEQUENCE OF NwIpxRipIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1 |
nwIpxRipIfCtrEntryEach entry indicates the current packet and byte count of IPX-RIP
routing protocol packets on the router port for which the entry
exists. NwIpxRipIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1 |
nwIpxRipIfCtrIfIndexIndicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.1 |
nwIpxRipIfCtrAdminStatusSets the administrative state of the per-port IPX-RIP packet and
byte counters on the router port for which the entry exists.
Enabled (3) causes these counters to become active. Disabled (2)
causes these counters to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.2 |
nwIpxRipIfCtrResetResets the per-port IPX-RIP packet and byte counters on the router
port for which this entry exists. Reset (2) resets the counters to 0.
nwIpxRipIfCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.3 |
nwIpxRipIfCtrOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpRipIfCtrAdminStatus has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.4 |
nwIpxRipIfCtrInPktsIndicates the total number of IPX-RIP routing protocol packets that
have been received, during nwIpxRipIfCtrOperationalTime, on the router
port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.5 |
nwIpxRipIfCtrOutPktsIndicates the total number of IPX-RIP routing protocol packets that
have been transmitted, during nwIpxRipIfCtrOperationalTime, on the
router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.6 |
nwIpxRipIfCtrFilteredPktsIndicates the total number of IPX-RIP routing protocol packets that
have been administratively filtered, during
nwIpxRipIfCtrOperationalTime, on the router port for which the entry
exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.7 |
nwIpxRipIfCtrDiscardPktsIndicates the total number of IPX-RIP routing protocol packets that
have been discarded, during nwIpxRipIfCtrOperationalTime, that were
received on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.8 |
nwIpxRipIfCtrInBytesIndicates the total number of bytes in the IPX-RIP routing protocol
packets that have been received, during nwIpxRipIfCtrOperationalTime,
on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.9 |
nwIpxRipIfCtrOutBytesIndicates the total number of bytes in the IPX-RIP routing protocol
packets that have been transmitted, during
nwIpxRipIfCtrOperationalTime, on the router port for which the entry
exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.10 |
nwIpxRipIfCtrFilteredBytesIndicates the total number of bytes in the IPX-RIP routing protocol
packets that have been administratively filtered, during
nwIpxRipIfCtrOperationalTime, on the router port for which the entry
exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.11 |
nwIpxRipIfCtrDiscardBytesIndicates the total number of bytes in the IPX-RIP routing protocol
packets that have been discarded, during nwIpRipIfCtrOperationalTime,
that were received on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.12 |
nwIpxRipDatabase OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3 |
nwIpxRipRouteTableThis table contains the IPX-RIP route table. This table contains an
entry for each route learned through the IPX-RIP routing protocol.
Only the best routes from this table are added to the IPX forwarding
table to be used for packet switching. SEQUENCE OF NwIpxRipRouteEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1 |
nwIpxRipRouteEntryEach entry describes the IPX-RIP route to the destination network
for which the entry exists. NwIpxRipRouteEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1 |
nwIpxRipRtNetIdThis is the primary index into the IPX-RIP route table. This number
indicates the Novell Network Number of the destination for which the
entry exists. The IpxAddress consists of a network number of 4 octetsro IpxAddress .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.1 |
nwIpxRipRtIfIndexThis is a secondary index into the IPX-RIP route table. This number
corresponds to the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.2 |
nwIpxRipRtSrcNodeThis is a secondary index into the RIP route table. This number
indicates the MAC-layer address of the source router from which this
route was learned. A value of 0.0.0.0.0.0 indicates that the source
is on the network segment directly connected to the router port,
nwIpxRipRtIfIndex.ro IpxAddress .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.3 |
nwIpxRipRtHopsIndicates the number of hops required to reach the destination for
which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.4 |
nwIpxRipRtTicksIndicates the amount of time (number of Time Ticks) required to
reach the destination for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.5 |
nwIpxRipRtAgeIndicates the amount of time, in seconds, since an update has been
received for the route for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.6 |
nwIpxRipRtTypeIndicates whether the destination network is directly connected
through the router port specified by nwIpxRipRtIndex, or is
indirectly connected through another router, specified by
nwIpxRipRtSrcNode.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.7 |
nwIpxRipRtFlagsSpecifies properties of the IPX-RIP route. The bit mask is as
follows: source-changed (1), best source (2), local-net (4),
net-down (8), update-fib-only (16).ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.8 |
nwIpxRipFilters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.4 |
nwIpxSap OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2 |
nwIpxSapSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1 |
nwIpxSapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.1 |
nwIpxSapAdminStatusSets the administrative state of the SAP protocol system-wide.
Enabled (3) causes SAP to become active on all router ports
configured and enabled for IPX routing services. Disabled (2) causes
the protocol to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.1.1 |
nwIpxSapOperStatusIndicates the current operating condition of the SAP protocol
system-wide. The value of nwIpxSapOperStatus indicates any problem
with your SAP configuration. A value of 6 indicates that regardless
of the value of nwIpxSAPAdminStatus, the SAP protocol is not operating
because of an invalid configuration.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.1.2 |
nwIpxSapAdminResetResets the SAP protocol. Reset (2) forces a system-wide restart of
SAP, without a graceful shutdown on any active router ports.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.1.3 |
nwIpxSapOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxSapOperStatus, has been in its current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.1.4 |
nwIpxSapVersionIndicates the current revision level of the SAP protocol firmware, in
textual format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.1.5 |
nwIpxSapStackSizeSpecifies the stack size of the SAP protocol thread. In order for a
change to this value to take effect, the protocol (nwIpxSapAdminReset),
IPX Routing Services (nwIpxSysAdminReset), or the device running
Routing Services must be reset.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.1.6 |
nwIpxSapThreadPrioritySpecifies the run-time execution priority of the SAP protocol
thread. In order for a change to this value to take effect, SAP
(nwIpxSapAdminReset), IPX Routing Services (nwIpxAdminReset), or the
device running Routing Services must be reset.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.1.7 |
nwIpxSapDatabaseThresholdSpecifies the run-time maximum number of entries that can be held in
the SAP server table.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.1.8 |
nwIpxSapAgeOutSpecifies the amount of time, in seconds, that an inactive server
table entry remains in the SAP server table before it is aged out.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.1.9 |
nwIpxSapHoldDownSpecifies the amount of time, in seconds, to wait before removing an
entry from the SAP server table, after receiving an update indicating
that the destination has become unreachable. All routers exchanging
SAP information must have the same hold down time. The time must be
long enough to allow all participating routers to receive the same
update.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.1.10 |
nwIpxSapCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2 |
nwIpxSapCtrAdminStatusSets the administrative state of the aggregate (system-wide) SAP
protocol packet and byte counters. Enabled (3) causes these counters
to become active on all router ports. Disabled (2) causes these
counters to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2.1 |
nwIpxSapCtrResetResets the aggregate (system-wide) SAP protocol packet and byte
counters. Reset (2) resets the SAP aggregate counters to 0.
nwIpxSapCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2.2 |
nwIpxSapCtrOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxSapCtrAdminStatus, has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2.3 |
nwIpxSapCtrInPktsIndicates the total number of SAP packets that have been received,
system-wide, during nwIpxSapCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2.4 |
nwIpxSapCtrOutPktsIndicates the total number of SAP packets that have been transmitted,
system-wide, during nwIpxSapCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2.5 |
nwIpxSapCtrFilteredPktsIndicates the total number of SAP packets that have been
administratively filtered, system-wide, during
nwIpxSapCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2.6 |
nwIpxSapCtrDiscardPktsIndicates the total number of SAP packets that have been discarded,
system-wide, during nwIpxSapCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2.7 |
nwIpxSapCtrInBytesIndicates the total number of bytes in the SAP packets that have been
received, system-wide, during nwIpxSapCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2.8 |
nwIpxSapCtrOutBytesIndicates the total number of bytes in the SAP packets that have
been transmitted, system-wide, during nwIpxSapCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2.9 |
nwIpxSapCtrFilteredBytesIndicates the total number of bytes in the SAP packets that have
been administratively filtered, system-wide, during
nwIpxSapCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2.10 |
nwIpxSapCtrDiscardBytesIndicates the total number of bytes in the SAP packets that have
been discarded system-wide, during nwIpxSapCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.1.2.11 |
nwIpxSapInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2 |
nwIpxSapIfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1 |
nwIpxSapIfTableThis table contains an entry for each router port. Each entry can
contain different values, allowing the SAP configuration to vary from
router port to router port. This table is indexed by nwIpxSapIfIndex,
which indicates the value of MIB 2 ifindex, which identifies the router
port for which each entry exists. SEQUENCE OF NwIpxSapIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1 |
nwIpxSapIfEntryEach entry contains the SAP configuration for the router port for
which the entry exists. NwIpxSapIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1 |
nwIpxSapIfIndexIndicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.1 |
nwIpxSapIfAdminStatusSets the administrative state of the SAP protocol on the router port
for which the entry exists. Enabled (3) causes SAP to become active
on the router port. Disabled (2) causes SAP to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.2 |
nwIpxSapIfOperStatusIndicates the current operating condition of the SAP protocol on the
router port for which the entry exists. The value of
nwIpxSapIfOperStatus indicates any problem with your SAP configuration
on the router port. A value of 6 indicates that regardless of the
value of nwIpxSapIfAdminStatus. SAP is not operating because of an
invalid configuration.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.3 |
nwIpxSapIfOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxSapIfOperStatus has been in its current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.4 |
nwIpxSapIfVersionIndicates the revision level of the SAP protocol in textual format.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.5 |
nwIpxSapIfAdvertisementSets the interval, in seconds, at which SAP advertises its server
table on the router port for which the entry exists. Change this value
to cause SAP to advertise its server table more or less frequently.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.6 |
nwIpxSapIfFloodDelaySpecifies the length of time, in seconds, that the SAP protocol will
wait after discovering that a directly connected route has gone down,
before flooding updates (triggered updates) on the router port for
which the entry exists. A value of 0 specifies that if a directly
connected route goes down, updates should be sent immediately .rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.7 |
nwIpxSapIfRequestDelaySpecifies the length of time, in seconds, that the SAP protocol will
wait after receiving a server request packet, before sending a
response on the router port for which the entry exists. A value of 0
specifies that if a server request packet is received on the port, a
response will be sent immediately.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.8 |
nwIpxSapIfPriorityThis object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a management
interface to all the Cabletron Routing Services protocol-specific
MIBs. Setting this object has no effect.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.9 |
nwIpxSapIfHelloTimerThis object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a management
interface to all the Cabletron Routing Services protocol-specific
MIBs.Setting this object has no effect.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.10 |
nwIpxSapIfSplitHorizonControls the operation of Split Horizon on the router port for which
the entry exists. When Split Horizon is enabled, SAP keeps track of
which router port information is received on, and prevents information
about a server from being sent back out the same router port it was
received on.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.11 |
nwIpxSapIfPoisonReverseControls the operation of Poison Reverse on the router port for
which the entry exists. When Poison Reverse is enabled, SAP
advertises any downed server as unreachable during the period of time
that it must wait (nwIpxSapIfHoldDown) before removing the server
from the server table.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.12 |
nwIpxSapIfSnoopingControls the operation of SAP Snooping on the router port. When SAP
Snooping is enabled SAP operates in passive mode, so it receives
service information, builds and maintains a server table, but does
not advertise or send updates on the router port for which the entry
exists. Enabled (3) turns on SAP Snooping. Disabled (2) turns off SAP
Snooping.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.13 |
nwIpxSapIfTypeIndicates whether the directly connected network segment does or
does not support broadcast media access. If broadcast media access is
supported, SAP advertisements are sent out, one broadcast packet per
router port. If broadcast media access is not supported, SAP
advertisements are sent to each neighbor router directly.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.14 |
nwIpxSapIfXmitCostThis object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific MIBs.
Setting this object has no effect.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.15 |
nwIpxSapIfAclIdentifierSpecifies the Access Control List ID of the access control list in
effect for SAP protocol packets on the router port for which the entry
exists. A value of 0 indicates that there is no access control list
in effect for SAP protocol packets on the router port for which the
entry exists.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.16 |
nwIpxSapIfAclStatusControls the operation of the access control list identified by
nwIpxSapIfAclIdentifier. Enabled (3) causes the access control list
to be applied to all SAP protocol packet traffic on the router port
for which the entry exists. Disabled (2) prevents the access control
list from being applied.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.17 |
nwIpxSapIfCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2 |
nwIpxSapIfCtrTableThis table contains an entry for each router port. This table is
indexed by nwIpxSapIfCtrIfIndex which indicates the value of MIB2
ifindex, which indentifies the router port for which the entry
exists. SEQUENCE OF NwIpxSapIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1 |
nwIpxSapIfCtrEntryEach entry indicates the current packet and byte count of SAP
protocol packets on the router port for which the entry exists. NwIpxSapIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1 |
nwIpxSapIfCtrIfIndexIndicates the value of the MIB 2 ifindex, which identifies the router
port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.1 |
nwIpxSapIfCtrAdminStatusSets the administrative state of the per-port SAP packet and byte
counters on the router port for which this entry exists. Enabled (3)
causes these counters to become active. Disabled (2) causes these
counters to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.2 |
nwIpxSapIfCtrResetResets the per-port SAP packet and byte counters on the router port
for which the entry exists. Reset (2) resets the counters to 0.
nwIpxSapIfCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.3 |
nwIpxSapIfCtrOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxSapIfCtrAdminStatus has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.4 |
nwIpxSapIfCtrInPktsIndicates the total number of SAP protocol packets that have been
received, during nwIpxSapIfCtrOperationalTime, on the router port for
which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.5 |
nwIpxSapIfCtrOutPktsIndicates the total number of SAP packets that have been transmitted,
during nwIpxSapIfCtrOperationalTime, on the router port for which the
entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.6 |
nwIpxSapIfCtrFilteredPktsIndicates the total number of SAP packets that have been
administratively filtered, during nwIpxSapIfCtrOperationalTime, on
the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.7 |
nwIpxSapIfCtrDiscardPktsIndicates the total number of SAP packets that have been discarded,
during nwIpxSapIfCtrOperationalTime, that were received on the router
port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.8 |
nwIpxSapIfCtrInBytesIndicates the total number of bytes in the SAP packets that have
been received, during nwIpxSapIfCtrOperationalTime, on the router port
for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.9 |
nwIpxSapIfCtrOutBytesIndicates the total number of bytes in the SAP packets that have been
transmitted, during nwIpxSapIfCtrOperationalTime, on the router port
for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.10 |
nwIpxSapIfCtrFilteredBytesIndicates the total number of bytes in the SAP packets that have been
administratively filtered, during nwIpxSapIfCtrOperationalTime, on the
router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.11 |
nwIpxSapIfCtrDiscardBytesIndicates the total number of bytes in the SAP packets that have
been discarded, during nwIpxSapIfCtrOperationalTime, that were
received on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.12 |
nwIpxSapServerTable OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3 |
nwIpxSapServerIfTableThe table contains the SAP server table. This table contains an entry
for each service learned of through the SAP protocol. SEQUENCE OF NwIpxSapServerIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1 |
nwIpxSapServerIfEntryEach entry contains the SAP route information for the Novell server
and router port for which the entry exists. NwIpxSapServerIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1 |
nwIpxSapServerIfNetIdThis is the primary index into the SAP server table. This number
corresponds to the Novell Network Number of the server offering the
service. The network number consists of 4 octets.ro IpxAddress .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.1 |
nwIpxSapServerIfNodeThis is a secondary index into the SAP Server Table. This is the
MAC-layer address represented as an octetstring of the service
offering the server for which the entry exists, represented as an
octet string.ro OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.2 |
nwIpxSapServerIfSocketThis is a secondary index into the SAP Server Table. This is the
socket number of the server application for which the entry exists.ro OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.3 |
nwIpxSapServerIfServiceTypeThis is a secondary index into the SAP Server Table. This is the
service type of the server application for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.4 |
nwIpxSapServerIfIfNumIndicates the value of MIB 2 ifindex, which identifies the router
port through which the service for which the entry exits is available.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.5 |
nwIpxSapServerIfSrcNodeThis is the MAC-layer address of the neighbor router from which the
service was learned about.ro OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.6 |
nwIpxSapServerIfNameThis is the name of the server offering the service for which the
entry exists.ro OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.7 |
nwIpxSapServerIfHopsIndicates the number of hops required to reach the server offering
the service for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.8 |
nwIpxSapServerIfAgeIndicates the amount of time since a SAP update was last received
for the server and service for which the entry exits.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.9 |
nwIpxSapServerIfTypeIndicates whether the server is on a network that is directly
connected through the router port for which the entry exists, or is
indirectly connected through another router specified by the value of
nwIpxSapServerIfSrcNode.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.10 |
nwIpxSapServerIfFlagsSpecifies properties of the SAP service for which the entry exist.
The bit mask is as follows: source-changed (1), best-source (2), not
used (4), net-down (8), not used (16).ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.11 |
nwIpxSapFilters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.4 |
nwIpxLinkState OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.2 |
nwIpxNlsp OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.2.1 |
nwIpxFib OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5 |
nwIpxFibTableThis table contains an entry describing each route being used to
forward IPX traffic to each destination Novell network and node. SEQUENCE OF NwIpxFibEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1 |
nwIpxFibEntryEach entry describes the route to the destination Novell network and
node for which the entry exists. NwIpxFibEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1 |
nwIpxFibNetIdSpecifies the Novell Network Number of the destination for which the
entry exists. The IpxAddress consists of four octetsro IpxAddress .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.1 |
nwIpxFibHopsIndicates the number of hops required to reach the destination for
which the entry exists. It is considered as metric 1.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.2 |
nwIpxFibTimeTicksIndicates the amount of time, indicated by the number of TimeTicks,
required for a packet to reach the destination network for which the
entry exists. It is considered as metric 2.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.3 |
nwIpxFibNextHopIfIndicates the router port through which the next hop node is
available. Packets destined for the network specified by the value of
nwIpxFibNetId will be forwarded on this port.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.4 |
nwIpxFibNextHopNetIndicates the Novell Network Number portion of the fully formed next
hop IPX Address of the next hop node.rw OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.5 |
nwIpxFibNextHopNodeIndicates the node portion of the fully formed next hop IPX Address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.6 |
nwIpxFibRouteTypeIndicates the status of the route. A value of 3 indicates that the
destination is on the network segment that is directly connected to
the router port identified by nwIpxFibNextHopIf. A value of 4 indicates
that the destination is on an indirectly connected network segment,
which is reachable through the next hop router indicated by the value
of nwIpxFibNextHopNodeId. A value of 2 indicates that the route is
invalid.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.7 |
nwIpxEndSystems OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6 |
nwIpxHostsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.1 |
nwIpxHostsInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.2 |
nwIpxHostsToMedia OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3 |
nwIpxHostMapTableThe Ipx Address translation table used for mapping
an IPX address to a circuit identifier (if applicable),
corresponding port number, and framing type. SEQUENCE OF NwIpxHostMapEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1 |
nwIpxHostMapEntryEach entry contains one IpxAddress to circuit
equivalence. Also provided is the framing required to
converse with this host, and the corresponding logical
port number. NwIpxHostMapEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1 |
nwIpxHostMapIfIndexThis is the primary (major) index into the Ipx HostMap
table. This number corresponds to the index into the MIB-2
Interfaces Group which describes the IPX router port for which
the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.1 |
nwIpxHostMapIpxAddrThe IpxAddress of the host on the corresponding interface
and circuit (if applicable). The IpxAddress consists of a network
number of 4 octets followed by 6 octets of node identifier.ro IpxAddress .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.2 |
nwIpxHostMapPhysAddrThe media-dependent 'physical' address. The value of
this object is 0 for entries indicating native-wan(8)
framing.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.3 |
nwIpxHostMapTypeSetting this object to the value invalid(2) has
the effect of invalidating the corresponding entry in the
nwIpxHostMapTable. That is, it effectively dissasociates the
circuit and/or interface identified with said entry from the
mapping identified with said entry. It is an implementation-
specific matter as to whether the agent removes an invalidated
entry from the table. Accordingly, management stations must be
prepared to receive tabular information from agents that
corresponds to entries not currently in use. Proper inter-
pretation of such entries requires examination of the relevant
wIpxHostMapType object.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.4 |
nwIpxHostMapCircuitIDThe identifier for the virtual circuit present on the
interface. On an interface configured for Frame Relay,
this number is the DLCI for the IPX Address at the end of
the circuit. For non-WAN interfaces, the value of this
object is zero.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.5 |
nwIpxHostMapFramingSpecifies the framing type required to converse with the
host for which this entry exists.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.6 |
nwIpxHostMapPortNumberThe unique value for the logical port number. It's value
ranges between 1 and a maximum value which is dependent on both
the number of configured interfaces in the system and the number
of circuits present on those interfaces which are of WAN type.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.7 |
nwIpxAccessControl OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7 |
nwIpxAclValidEntriesIndicates the number of valid entries that exist in the access control
list table.ro Gauge .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.1 |
nwIpxAclTableThis table contains the access control list information for IPX
traffic. This table contains entries, each of which allows packet
forwarding between source/destination pairs to be permitted or denied.
The list is identified by the Access Control List ID. Each list may
contain multiple entries ordered by sequence number. When a particular
access control list is searched, it is searched in sequence number
order and the first match found ends the search. If no match if found,
access defaults to permitted. SEQUENCE OF NwIpxAclEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2 |
nwIpxAclEntryEach entry contains IPX source/destination access information. NwIpxAclEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1 |
nwIpxAclIdentifierThis is the primary (major) index into the IPX access control list
table. This value identifies the access control list by a unique
identifier (at least 1) arbitrarily assigned by the user. All entries
that have the same value for nwIpxAclIdentifier belong to the same
access control list.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.1 |
nwIpxAclSequenceThis is the secondary (minor) index into the IPX access control list
table. This number corresponds to a sequence number used to order
multiple entries within the same access control list.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.2 |
nwIpxAclPermissionSpecifies whether access is allowed or denied between the source and
destination address pair. Note that source and destination are
interchangeable when bi-directional control is selected. To remove an
existing entry set nwIpxAclPermission to invalid (2). Invalid entries
disappear after reboot.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.3 |
nwIpxAclMatchesIndicates the number of matches on this entry that have resulted in
the permit/deny access restriction being applied as part of the
forwarding process.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.4 |
nwIpxAclDestNetNumSpecifies the destination Novell Network Number used to compare for
matches on the access control list. A 0 value is a wildcard which
matches any Novell Network Number.rw OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.5 |
nwIpxAclDestNodeSpecifies the MAC-layer address of the destination node (represented
as an octet string), used to compare for matches on the access control
list. A value 0 is a wildcard, which matches any node.rw OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.6 |
nwIpxAclDestSocketSpecifies the socket number of the destination socket used to compare
for matches on the access control list. A 0 value is a wildcard
matching any socket.rw OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.7 |
nwIpxAclSrcNetNumSpecifies the Novell Network Number of the source Novell Network used
to compare for matches on the access control list. A 0 value is a
wildcard matching any Novell Network Number.rw OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.8 |
nwIpxAclSrcNodeSpecifies the MAC-layer address of the source node (represented as an
octet string), used to compare for matches on the Access Control
List. A 0 value is a wildcard matching any node.rw OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.9 |
nwIpxAclSrcSocketSpecifies the socket number of the source socket to compare for
matches on the Access Control List. A 0 value is a wildcard matching
any socket.rw OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.10 |
nwIpxFilters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.8 |
nwIpxRedirector OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9 |
nwIpxNetBIOS OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1 |
nwIpxNetBIOSSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1 |
nwIpxNetBIOSConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.1 |
nwIpxNetBIOSAdminStatusSets the administrative state of the NetBIOS Broadcast Redirector,
system-wide. Enabled (3) causes the NetBios Broadcast Redirector to
become active on any router port configured and enabled for IPX
Routing Services. Disabled (2) causes the NetBIOS Broadcast Redirector
to perform a graceful shut-down on any active IPX router port.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.1.1 |
nwIpxNetBIOSOperStatusIndicates the current operating condition of the NetBIOS Broadcast
Redirector, system-wide.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.1.2 |
nwIpxNetBIOSAdminResetResets the NetBIOS Broadcast Redirector, system-wide. Reset (2)
forces a restart of the NetBIOS Broadcast Redirector without a
graceful shut-down on any active router port and without effecting any
other router application.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.1.3 |
nwIpxNetBIOSOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxNetBiosOperStatus has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.1.4 |
nwIpxNetBIOSVersionIndicates the current revision level of the NetBIOS Broadcast
Redirector firmware, in textual format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.1.5 |
nwIpxNetBIOSCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2 |
nwIpxNetBIOSCtrAdminStatusSets the administrative state of the aggregate (system-wide) NetBIOS
broadcast packet and byte counters. Enabled (3) causes these counters
to become active on all router port. Disabled (2) causes these
counters to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2.1 |
nwIpxNetBIOSCtrResetResets the aggregate (system-wide) NetBIOS broadcast packet and byte
counters. Reset (2) resets the NetBIOS broadcast aggregate counters
to 0. nwIpxNetBIOSCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2.2 |
nwIpxNetBIOSCtrOperationalTimeIndicates the elapsed time, in hundreds of a second, that the
nwIpxNetBIOSCtrAdminStatus has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2.3 |
nwIpxNetBIOSCtrInPktsIndicates the total number of NetBIOS broadcast packets that have
been received, system-wide, during nwIpxNetBIOSCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2.4 |
nwIpxNetBIOSCtrOutPktsIndicates the total number of NetBIOS broadcast packets that have
been transmitted, system-wide, during nwIpxNetBIOSCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2.5 |
nwIpxNetBIOSCtrFilteredPktsIndicates the total number of NetBIOS broadcast packets that have
been administratively filtered, system-wide, during
nwIpxNetBIOSCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2.6 |
nwIpxNetBIOSCtrDiscardPktsIndicates the total number of NetBIOS broadcast packets that have
been discarded, system-wide, during nwIpxNetBIOSCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2.7 |
nwIpxNetBIOSCtrInBytesIndicates the total number of bytes in the NetBIOS packets that have
been received, system-wide, during nwIpxNetBIOSCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2.8 |
nwIpxNetBIOSCtrOutBytesIndicates the total number of bytes in the NetBIOS packets that have
been transmitted, system-wide, during nwIpxNetBIOSCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2.9 |
nwIpxNetBIOSCtrFilteredBytesIndicates the total number of bytes in the NetBIOS packets that have
been administratively filtered, system-wide, during
nwIpxNetBIOSCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2.10 |
nwIpxNetBIOSCtrDiscardBytesIndicates the total number of bytes in the NetBIOS packets that have
been discarded, system-wide, during nwIpxNetBIOSCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.1.2.11 |
nwIpxNetBIOSInterface OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2 |
nwIpxNetBIOSIfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1 |
nwIpxNetBIOSIfTableThis table contains an entry for each router port. Each entry can
contain different values, allowing the NetBIOS Broadcast Redirector
configuration to vary from router port to router port. This table is
indexed by nwIpxNetBIOSIfIndex, which indicates the value of MIB 2
ifindex, which identifies the router port for which the entry exists. SEQUENCE OF NwIpxNetBIOSIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1 |
nwIpxNetBIOSIfEntryEach entry contains the IPX NetBIOS broadcasting configuration for
the router port for which the entry exists. NwIpxNetBIOSIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1 |
nwIpxNetBIOSIfIndexIndicates the value in MIB 2 ifindex, which identifies the router
port for which the entry exists.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.1 |
nwIpxNetBIOSIfAdminStatusSets the administrative state of IPX NetBIOS broadcasting on the
router port for which the entry exists. Enabled (3) causes this
router port to become active. Disabled (2) causes it to become
inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.2 |
nwIpxNetBIOSIfOperStatusIndicates the current operating condition of IPX NetBIOS
broadcasting on the IPX router port for which the entry exists.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.3 |
nwIpxNetBIOSIfOperationalTimeIndicates the elapsed time, in hundredths of a second, that IPX
NetBIOS broadcasting, nwIpxNetBIOSIfOperStatus, has been in its
current state on the router port for which the entry exists.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.4 |
nwIpxNetBIOSIfCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2 |
nwIpxNetBIOSIfCtrTableThis table contains the IPX NetBIOS packet and byte counters for each
router port on this device. SEQUENCE OF NwIpxNetBIOSIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1 |
nwIpxNetBIOSIfCtrEntryThis is the primary index into the NetBIOS Interface Counter Table.
This number corresponds to the index into the MIB 2 Interface Table
which describes the router port for which this entry exists. NwIpxNetBIOSIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1 |
nwIpxNetBIOSIfCtrIfIndexThis is the primary index into the IPX NetBIOS Interface Counter Table.
This number correspoonds to the index into the MIB 2 Interface Table
which describes the router port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.1 |
nwIpxNetBIOSIfCtrAdminStatusSets the administrative state of the IPX NetBIOS packet and bytes
counters on the IPX router port for which the entry exists. Enabled (3)
causes these counters to become active on the configured NetBIOS router
port. Disabled (2) causes thes counters to become inactive on the
configured NetBIOS router port.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.2 |
nwIpxNetBIOSIfCtrResetResets the NetBIOS packet and bvyte counters on the router port for
which the entry exists. Reset (2) resets the interface-specific
counters to 0. nwIpxNetBIOSIfCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.3 |
nwIpxNetBIOSIfCtrOperationalTimeIndicates the amount of time, in hundredths of a second, that the
interface-specific NetBIOS packet and byte counters have been active on
the router port for which the entry exists.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.4 |
nwIpxNetBIOSIfCtrInPktsIndicates the total number of NetBIOS packets that have been recieved,
on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.5 |
nwIpxNetBIOSIfCtrOutPktsIndicates the total number of NetBIOS packets that have been
transmitted, on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationallTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.6 |
nwIpxNetBIOSIfCtrFilteredPktsIndicates the total number of NetBIOS packets that have been
administratively filtered, on the router port for which the entry
exists, during nwIpxNetBIOSIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.7 |
nwIpxNetBIOSIfCtrDiscardPktsIndicates the total number of NetBIOS packets that have been discarded,
on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.8 |
nwIpxNetBIOSIfCtrInBytesIndicates the total number of bytes in the NetBIOS packets that have
been recieved, on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.9 |
nwIpxNetBIOSIfCtrOutBytesIndicates the total number of bytes in the NetBIOS packets that have
been transmitted, on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.10 |
nwIpxNetBIOSIfCtrFilteredBytesIndicates the total number of bytes in the NetBIOS packets that have
been administratively filtered, that were recieved on the router port
for which the entry exists during nwIpxNetBIOSIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.11 |
nwIpxNetBIOSIfCtrDiscardBytesIndicates the total number of bytes in the NetBIOS packets that have
been discarded, on the router port for which the entry exists, during
nwIpxNetBIOSIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.12 |
nwIpxBroadcast OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2 |
nwIpxBroadcastSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1 |
nwIpxBroadcastConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.1 |
nwIpxBcastAdminStatusSets the administrative state of IPX Broadcast. Enabled (3) casuses
IPX Broadcast to become active on any configured IPX router port.
Disabled (2) causes IPX Broadcast to perform a graceful shutdown on
any active IPX router ports.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.1.1 |
nwIpxBcastOperStatusIndicates the current operating condition of the IPX Broadcast.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.1.2 |
nwIpxBcastAdminResetResets the IPX Broadcast. Reset (2) will force a restart of the IPX
Broadcast without a graceful shutdown on any active IPX router port,
without effecting any other router applications.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.1.3 |
nwIpxBcastOperationalTimeIndicates the amount of time, in hundredths of a second, that IPX
Broadcast has been in its current operational state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.1.4 |
nwIpxBcastVersionIndicates the current revision level of IPX Broadcast.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.1.5 |
nwIpxBroadcastCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2 |
nwIpxBcastCtrAdminStatusSets the administrative state of the aggregate (device-wide) Broadcast packet and byte counters. enable (3) causes these counters
to become active on any router port running Broadcast. disabled (2)
causes these counters to become inactive on all router port
running Broadcast.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2.1 |
nwIpxBcastCtrResetResets the aggregate (device-wide) IPX Broadcast packet and byte
counters. Reset (2) resets the IPX Broadcast aggregate counters to 0.
nwIpxBcasstCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2.2 |
nwIpxBcastCtrOperationalTimeIndicates the amount of time, in hundredths of a second, that the
aggregate (device-wide) IPX Broadcast packet and byte counters have been
in the current administrative state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2.3 |
nwIpxBcastCtrInPktsIndicates the total number of IPX Broadcast packets that have been
received, device-wide, during nwIpxBcastCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2.4 |
nwIpxBcastCtrOutPktsIndicates the total number of IPX Broadcast packets that have been
transmitted, device-wide, during nwIpxBcastCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2.5 |
nwIpxBcastCtrFilteredPktsIndicates the total number of IPX Broadcast packets that have been
administaratively filtered, device-wide, during
nwIpxBcastCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2.6 |
nwIpxBcastCtrDiscardPktsIndicates the total number of IPX Broadcast packets that have been
discarded, device-wide, during nwIpxBcastCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2.7 |
nwIpxBcastCtrInBytesIndicates the total number of IPX Broadcast packets that have been
recieved, device-wide, during nwIpxBcastCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2.8 |
nwIpxBcastCtrOutBytesIndicates the total number of IPX Broadcast packets that have been
transmitted, device-wide, during nwIpxBcastCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2.9 |
nwIpxBcastCtrFilteredBytesIndicates the total number of bytes in the IPX Broadcast packets that
have been administratively filtered, device-wide, during
nwIpxBcastOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2.10 |
nwIpxBcastCtrDiscardBytesIndicates the total number of bytes in the Broadcast packets that
have been discarded, during nwIpxBcastCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.1.2.11 |
nwIpxBroadcastInterface OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2 |
nwIpxBroadcastIfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1 |
nwIpxBcastIfTableThis table contains an entry for each router port configured for the
IPX distance-vector based routing protocol. Each entry can contain
different values, allowing the routing protocol configuration to
vary from router port to router port. This table is indexed by
nwIpxBcastIfIndex, which indicates the value of MIB 2 ifindex, which
identifies the router port for which the entry exists. SEQUENCE OF NwIpxBcastIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1 |
nwIpxBcastIfEntrySpecifies the IPX Broadcast configuration information for the
logical IPX interface for which this entry exists. NwIpxBcastIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1 |
nwIpxBcastIfIndexThis index corresponds to the primary index into the MIB 2 Interface
Table, which describes the router port for which the entry exists.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.1 |
nwIpxBcastIfAdminStatusSets the administrative state of the IPX Broadcast on the router
port for which the entry exists. Enabled (2) causes IPX Broadcast on
this router port to become active. Disabled (2) causes IPX Broadcast
to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.2 |
nwIpxBcastIfOperStatusIndicates the current operating condition of the IPX Broadcast on
the router port for which the entry exists.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.3 |
nwIpxBcastIfOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIPXBcastIfOperStatus has been in its current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.4 |
nwIpxBroadcastIfCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2 |
nwIpxBcastIfCtrTableThis table contains the IPX Broadcast packet and byte counters for each
router port on this device. SEQUENCE OF NwIpxBcastIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1 |
nwIpxBcastIfCtrEntryThis is the primary index into the Broadcast Interface Counter Table.
This number corresponds to the index into the MIB 2 Interface Table
which describes the router port for which the entry exists. NwIpxBcastIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1 |
nwIpxBcastIfCtrIfIndexThis is the primary index into the IPX Broadcast Interface Counter
Table. This number corresponds to the index into the MIB 2 Interface
Table which describes the router port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.1 |
nwIpxBcastIfCtrAdminStatusSets the administrative state of the IPX Broadcast packet and byte
counters on the router port for which the entry exists. Enabled (3)
causes these counters to become acive on the configured IPX Broadcast
router port. Disabled (2) causes these counters to become inactive on
the configured IPX Broadcast router port.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.2 |
nwIpxBcastIfCtrResetResets the IPX Broadcast packet and byte counters on the router port for
which the entry exists. Reset (2) resets the interface-specific counters
to 0. nwIpxBcastIfCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.3 |
nwIpxBcastIfCtrOperationalTimeIndicates the amount of time, in hundredths of a second, that the
interface-specific IPX Broadcast packet and byte counters have been in
the current administrative state on the router port for which the entry
exists.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.4 |
nwIpxBcastIfCtrInPktsIndicates the total number of IPX Broadcast packets that have been
recieved, on the router port for which the entry exists, during
nwIpxBcastIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.5 |
nwIpxBcastIfCtrOutPktsIndicates the total number of Broadcast packets that have been
transmitted, on the router port for which the entry existsl, during
nwIpxBcastIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.6 |
nwIpxBcastIfCtrFilteredPktsIndicates the total number of IPX Broadcast packets that have been
administratively filtered, on the router port for which the entry
exists, during nwIpxBcastIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.7 |
nwIpxBcastIfCtrDiscardPktsIndicates the total number of Broadcast packets that have been dis-
carded, on the router port for which the entry exists, during
nwIpxBcastIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.8 |
nwIpxBcastIfCtrInBytesIndicates the total number of bytes in the IPX Broadcast packets that
have been recieved, on the router port for which the entry exists,
during nwIpxBcastIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.9 |
nwIpxBcastIfCtrOutBytesIndicates the total number of bytes in the IPX Broadcast packets that
have been transmitted, on the router port for which the entry exists,
during nwIpxBcastIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.10 |
nwIpxBcastIfCtrFilteredBytesIndicates the total number of bytes in the IPX Broadcast packets that
have been administratively filtered on the router port for which the
entry exists during nwIpxBcastIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.11 |
nwIpxBcastIfCtrDiscardBytesIndicates the total number of bytes in the IPX Broadcast packets that
have been discarded on the router port for which the entry exists,
during nwIpxBcastIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.12 |
nwIpxEcho OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3 |
nwIpxEchoSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1 |
nwIpxEchoConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.1 |
nwIpxEchoAdminStatusSets the administrative state of the IPX Echo. Enabled (3) causes
IPX ECHO to become active on any configured IPX router ports.
Disabled (2) causes IPX Echo to perform a graceful shutdown on any
active IPX router port.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.1.1 |
nwIpxEchoOperStatusIndicates the operating condition of IPX Echo.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.1.2 |
nwIpxEchoAdminResetResets IPX Echo. Reset (2) will force a restart of IPX Echo without
a graceful shutdown on any active IPX router port, without effecting
any other router applications.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.1.3 |
nwIpxEchoOperationalTimeIndicates the amount of time, in hundredths of a second, that IPX
Echo has been in its current administrative state,
nwIpxEchoOperStatus.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.1.4 |
nwIpxEchoVersionIndicates the current revision level of IPX Echo firmware.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.1.5 |
nwIpxEchoCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2 |
nwIpxEchoCtrAdminStatusSets the administrative state of the aggregae (device-wide) IPX Echo
packet and byte counters. Enabled (3) causes these counters to become
active on any router port running IPX Echo. Disabled (2) causes these
counters to become inactive on all router ports.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2.1 |
nwIpxEchoCtrResetResets the aggregate (device-wide) IPX Echo packet and byte counters.
Reset (2) resets the IPX Echo aggregate counters to 0.
nwIpxEchoCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2.2 |
nwIpxEchoCtrOperationalTimeIndicates the amount of time, in hundredths of a second, that the
aggreagate (device-wide) IPX Echo packet and byte counters have been in
the current administrative state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2.3 |
nwIpxEchoCtrInPktsIndicates the total number of IPX Echo packets that have been recieved,
device-wide, during nwIpxEchoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2.4 |
nwIpxEchoCtrOutPktsIndicates the total number of IPX Echo packets that have been
transmitted, device-wide, during nwIpxEchoCtrOperationalTIme.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2.5 |
nwIpxEchoCtrFilteredPktsIndicates the total number of IPX Echo packets that have been
administratively filtered, device-wide, during
nwIpxEchoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2.6 |
nwIpxEchoCtrDiscardPktsIndicates the total number of IPX Echo packets that have been discarded,
device-wide, during nwIpxEchoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2.7 |
nwIpxEchoCtrInBytesIndicates the total number of IPX Echo packets that have been recieved,
device-wide, during nwIpxEchoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2.8 |
nwIpxEchoCtrOutBytesIndicates the total number of IPX Echo packets that have been
transmitted, device-wide, during nwIpxEchoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2.9 |
nwIpxEchoCtrFilteredBytesIndicates the total number of IPX Echo packets that have been
administratively filtered, device-wide, during
nwIpxEchoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2.10 |
nwIpxEchoSCtrDiscardBytesIndicates the total number of bytes in the Echo packets that
have been discarded, during nwIpxEchoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.1.2.11 |
nwIpxEchoInterface OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2 |
nwIpxEchoIfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1 |
nwIpxEchoIfTableThis table contains an entry for each router port configured for IPX
Echo. Each entry can contain different values, allowing the routing
protocol configuration to vary from router port to router port. This
table is indexed by nwIpxEchoIfIndex, which indicates the value of
MIB 2 ifindex, which identifies the router port for which the entry
exists. SEQUENCE OF NwIpxEchoIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1 |
nwIpxEchoIfEntrySpecifies the IPX Echo information for the logical IPX interface for
which the entry exists. NwIpxEchoIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1 |
nwIpxEchoIfIndexThis index corresponds to the primary index into the MIB 2 ifTable,
which describes the router port for which the entry exists.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.1 |
nwIpxEchoIfAdminStatusSets the administrative state of IPX Echo on the router port for
which the entry exists. Enabled (2) causes this router port to
become active. Disabled (3) causes this router port to become
inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.2 |
nwIpxEchoIfOperStatusIndicates the current operating condition of IPX Echo on the router
port for which the entry exists.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.3 |
nwIpxEchoIfOperationalTimeIndicates the elapsed time, in hundredths of a second, that
nwIpxEchoIfAdminStatus has been in its current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.4 |
nwIpxEchoIfCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2 |
nwIpxEchoIfCtrTableThis table contains the IPX Echo packet and byte counters for each
router port on this device. SEQUENCE OF NwIpxEchoIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1 |
nwIpxEchoIfCtrEntryThis is the primary index into the Echo Interface Counter Table. This
number corresponds to the index into the MIB 2 Interface Table which
describes the router port for which the entry exists. NwIpxEchoIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1 |
nwIpxEchoIfCtrIfIndexThis is the primary index into the IPX Echo Interface Counter Table.
This number corresponds to the index into the MIB 2 Interfcace Table
which describes the router port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.1 |
nwIpxEchoIfCtrAdminStatusSets the administrative state of the IPX Echo packet and byte counters
on the IPX router port for which the entry exists. Enabled (3) causes
these counters to become active on the router port configured for IPX
Echo. Disabled (2) causes these counters to become inactive on the
configured IPX Echo router port.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.2 |
nwIpxEchoIfCtrResetResets the IPX Echo packet andbyte counters on the router port for which
the entryexists. Reset (2) resets the interface-specific counters to 0.
nwIpxEchoIfCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.3 |
nwIpxEchoIfCtrOperationalTimeIndicates the amount of time, in hundredths of a second, that the
interface-specific IPX Echo packet and byte counters have been in the
current administrative state on the router port for which the entry
exists.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.4 |
nwIpxEchoIfCtrInPktsIndicates the total number of IPX Echo packets that have been recieved,
on the router port for which the entry exists, during
nwIpxEchoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.5 |
nwIpxEchoIfCtrOutPktsIndicates the total number of IPX Echo packets that have been
transmitted, on the router port for which the entry exists, during
nwIpxEchoIfCrOperationalTIme.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.6 |
nwIpxEchoIfCtrFilteredPktsIndicates the total number of IPX Echo packets that have been
administratively filtered, on the router port for which the entry
exists, during nwIpxEchoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.7 |
nwIpxEchoIfCtrDiscardPktsIndicates the total number of IPX Echo packets that have been discaded,
on the router port for which the entry exists, during
nwIpxEchoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.8 |
nwIpxEchoIfCtrInBytesIndicates the total number of bytes in the IPX Echo packets that have
been recieved, on the router port for which the entry exists, during
nwIpxEchoIfCtrOpeationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.9 |
nwIpxEchoIfCtrOutBytesIndicates the total number of bytes in the IPX Echo packets that have
been transmitted, on the router port for which the entry exists, during
nwIpxEchoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.10 |
nwIpxEchoIfCtrFilteredBytesIndicates the total number of bytes in the IPX Echo packets that have
been administratively filtered and recieved on the router port for which
the entry exists, during nwIpxEchoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.11 |
nwIpxEchoIfCtrDiscardBytesIndicates the total number of bytes in the IPX Echo packets that have
been discarded, that were recieved on the router port for which the
entry exists, during nwIpxEchoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.12 |
nwIpxEvent OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10 |
nwIpxEventLogConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.1 |
nwIpxEventAdminStatusSets the administrative state of IPX event logging. Enabled (3)
causes the event log to become active. Disabled (2) causes the event log
to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.1.1 |
nwIpxEventMaxEntriesSets the maximum size of the event log table. When the table size
exceeds the maximum, the first entry is deleted until the size of
the table does not exceed the maximum.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.1.2 |
nwIpxEventTraceAllSets the administrative state of the event log. Enabled (3) allows
logging of all event types on all router ports from all protocols
and components. Disabled (2) causes the filter table to specify
which events to log.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.1.3 |
nwIpxEventLogFilterTable OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2 |
nwIpxEventFilterTableThis table contains an entry for each event filter configured for
IPX Routing Services events. SEQUENCE OF NwIpxEventFilterEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1 |
nwIpxEventFilterEntryEach entry describes an event filter which defines a particular type
of event to be logged to the event log. The nwIpxEventProtocol
refers to the instance used in the nwRtgProtocolTable and
nwComponentTable specified by the Cabletron Routing Services MIB,
and identifies the protocol to which the entry applies. NwIpxEventFilterEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1 |
nwIpxEventFltrProtocolSpecifies the routing protocol involved in the event for which the
event filter exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.1 |
nwIpxEventFltrIfNumSpecifies the router port involved in the event for which the event
filter exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.2 |
nwIpxEventFltrControlSet this value to 3 to add the event filter to the Event Filter
Table. Set this value to 2 to delete the event filter from the Event
Filter Table.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.3 |
nwIpxEventFltrTypeThis 6 bit mask specifies the types of events to be logged. By
default all 6 bits are set to 1, indicating that all types of events
will be logged. Setting any bit to 0 removes an event type from this
field and prevents that type of event from being logged. Adding
event types to this field will enable those types of events to be
logged.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.4 |
nwIpxEventFltrSeverityThis object controls the amount of logging by ignoring events of
lower priority than specified by this filter value. The highest
value will ignore all events except those of the highest severity.
`Highmed' will log all events highest priority through lowest.
`Highlow' will log all events highest priority through lowest. The
`highmed' severity is the default setting.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.5 |
nwIpxEventFltrActionThis field specifies how the events are to be logged. Logging to the
`log' stores the events in the event log table. Logging to `trap' sends
events out through the trap mechanism.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.6 |
nwIpxEventLogTable OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3 |
nwIpxEventTableThis table contains an entry for each event that has been logged. SEQUENCE OF NwIpxEventEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1 |
nwIpxEventEntryEach entry contains the information about an event that has been
logged to the event table. NwIpxEventEntry .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1 |
nwIpxEventNumberAn ordinal value assigned to the event for which the entry exists.
nwIpxEventNumber is assigned so that each event in the event log can
be uniquely identified by the value of nwIpxEventNumber.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.1 |
nwIpxEventTimeIndicates the time at which the event was logged to the event log.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.2 |
nwIpxEventTypeIndicates the type of event that was logged.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.3 |
nwIpxEventSeverityIndicates the priority that was assigned to this type event.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.4 |
nwIpxEventProtocolIndicates the routing protocol that was involved in this event.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.5 |
nwIpxEventIfNumIndicates the router port that was involved in the event.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.6 |
nwIpxEventTextStringContains the actual text string that was logged.ro OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.7 |
nwIpxWorkGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.2.2.11 |