CTRON-SFCS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CTRON-SFCS-MIB.
490
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
490 total| Object Name |
|---|
cabletron OBJECT IDENTIFIER .1.3.6.1.4.1.52 |
IMPORTS Unknown .1.3.6.1.4.1.52 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.52.4 |
ctron OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1 |
ctDataLink OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2 |
ctSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11 |
ctsfSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1 |
ctSFCS OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1 |
sfcsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.1 |
sfcsSysConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1 |
sfcsSysConfigTable OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1 |
sfcsSysConfigEnt OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1 |
sfcsSysConfigAdminStatusSets the administrative state of the SFCS switching
services for this virtual switch. This controls the
SFCS state at a chassis level. Regardless of the
per-interface state of each SFCS switching element
and the state of active connections, writing the value
disabled(2) will cause the entire switch to immediately
shutdown.
enabled(1)
disabled(2)
other(3)
::= { sfcsSysConfigEnt 1 }
sfcsSysConfigOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
other(3),
pending-disable(4),
pending-enable(5),
invalid-config(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTIONrw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.2 |
sfcsSysConfigOperTimeIndicates the amount of time (# of time ticks) that
this switch system has been in its current operational
state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.3 |
sfcsSysConfigLastChangeIndicates the last time a change was made to the
configuration entry for this switch.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.4 |
sfcsSysConfigSwitchCapacityIndicates the maximum front panel bandwidth based on current
hardware configuration of the switch in Mbpsro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.5 |
sfcsSysConfigMaxCnxEntriesIndicates the maximum number of connections which
can be established on this switch.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.6 |
sfcsSysConfigMaxStatEntriesIndicates the maximum number of stats enabled VCs for this
switch.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.7 |
sfcsSysConfigMaxUpcEntriesIndicates the maximum number of UPC enabled VCs for this
switch.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.8 |
sfcsSysConfigNumberANIMSIndicates the number of ATM Network Inteface Modules
currently configured on this switch.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.9 |
sfcsSysConfigInterfaceCapabilityIndicates the total bandwidth capability(of the engine)
for this switch expressed in Mbps.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.10 |
sfcsSysConfigTypeofSwitchIndicates what type of switch this is.
other(1)
sfcellswitch(2)
sfpacketswitch(3)ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.11 |
sfcsSysConfigPolicingSupportIndicates whether or not this switch supports policing.
supported(1)
not supported(2)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.12 |
sfcsSysConfigPnniNsapPrefixThis is the 13 byte NSAP prefix to use
with address registration.rw OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.13 |
sfcsSysConfigPnniNodeLevelThis is the PNNI node level value.
The range can be from 0 to 104.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.14 |
sfcsSysConfigPnniAddessingModeThis is the PNNI addressing mode - that
can range from 0 to 2.
0 - Auto Mode using MAC
1 - Auto Mode using board#
2 - Manualrw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.15 |
sfcsSysConfigPnniAddessingAdmnStatusThis is the PNNI addressing admn status.
Down - 2. Up - 1.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.16 |
sfcsSysConfigFMVerThis is the Firmware Revision of the switch.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.17 |
sfcsSysConfigCTMSlotMaskThis is the slot mask for all ctm boards in the chassis.
The least significant bit represents slot 1.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.18 |
sfcsSysConfigMaxfreecvaThis is the maximum number of CAC connection blocks that
CAC will allow on its free list. The default is 1024. If too low
CAC performance will degrade (thrashing control blocks), If too high,
memory exhaustion may occur.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.19 |
sfcsSysConfigUBRFor the set operation: UBR_Cfg is set across all boards in the
chassis (that are operational and manageable).
For the get operation: UBR_Cfg setting is retrived from the
current chassis manager only (one slot only).
IF boards are introduced or re-introduced to the chassis their
UBR value will be 0. In order to insure a required UBR_Cfg value
the set operation should be proformed after slot insertions or
re-insertions are completed to the chassis.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.20 |
sfcsSysStatus OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.2 |
sfcsSysStatusTable OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1 |
sfcsSysStatusEnt OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1 |
sfcsSysStatusTdmCellCountIndicates the total number of cells being transfered
across the TDM for the entire switch.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.1 |
sfcsSysStatusTdmUtilizationIndicates the total percentage TDM utilization for the switch.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.2 |
sfcsSysStatusCurrCnxEntriesIndicates the current number of connection entries for
this switch.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.3 |
sfcsSysStatusCurrUPCEntriesIndicates the current number of UPC entries for this
switch.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.4 |
sfcsSysStatusCurrStatsEntriesIndicates the current number of statistics entries for
this switch.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.5 |
sfcsSysStatusAllocatedBwIndicates the current allocated bandwidth of the switch in
bits per second.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.6 |
sfcsSysSystemCfg OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.3 |
sfcsSysSystemCfgTable OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1 |
sfcsSysSystemCfgEnt OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1 |
sfcsSysBPCfg OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.1.4 |
sfcsEngine OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.2 |
sfcsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1 |
sfcsStatus OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2 |
sfcsStatusTableThis table contains the status information for each SFCS
switch module. SEQUENCE OF SfcsStatusEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1 |
sfcsStatusEntryEach entry contains the SFCS statistics for the SFCS
instance. SfcsStatusEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1 |
sfcsStatusSlotIndexThe primary index to the SFCS switch table. This
identifies the chassis slot number for this SFCS module.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.1 |
sfcsStatusTdmCellCountIndicates the total number of cells being transfered
across the TDM for this switch module.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.2 |
sfcsStatusTdmUtilizationIndicates the percentage TDM utilization for this switch
module.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.3 |
sfcsStatusCurrCnxEntriesIndicates the current number of connection entries for
this switch module.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.4 |
sfcsStatusCurrUPCEntriesIndicates the current number of UPC entries for this
switch module.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.5 |
sfcsStatusCurrStatsEntriesIndicates the current number of statistics entries for
this switch module.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.6 |
sfcsStatusCurrCtmAgentIndicates the current board number of
the ctm agent for this switch module.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.7 |
sfcsUPCEngine OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.3 |
sfcsUPCTableThis table contains the Usage Parameter Control info
for this SFCS module. SEQUENCE OF SfcsUPCEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1 |
sfcsUPCEntryEach entry contains the UPC data for the SFCS instance. SfcsUPCEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1 |
sfcsUPCSlotIndexThe primary index to the SFCS switch table. This
identifies the slot number for this SFCS module.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.1 |
sfcsUPCAdminStatusSets the administrative state of the SFCS module's
UPC engine.
enabled(1)
disabled(2)
other(3)rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.2 |
sfcsUPCOperStatusIndicates the operational state of the SFCS module's
UPC engine.ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.3 |
sfcsUPCResetResets the UPC engine for this SFCS module.
other(1)
reset(2)rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.4 |
sfcsUPCOperTimeIndicates the amount of time (# of time ticks) that
the UPC engine has been active for this switch module.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.5 |
sfcsStatisticsEngine OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.4 |
sfcsStatsEngineTableThis table contains information for the Statistics engine
for a particular switch module. SEQUENCE OF SfcsStatsEngineEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1 |
sfcsStatsEngineEntryEach entry contains the statistics engine data for the
SFCS module. SfcsStatsEngineEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1 |
sfcsStatsEngineSlotIndexThe primary index to the SFCS stats engine table.
This identifies the chassis slot number for this SFCS
module.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.1 |
sfcsStatsEngineAdminStatusSets the administrative state of the SFCS switch
statistics engine. Writing a value of enabled(1) causes
these counters to become active for this SFCS switch
instance. Writing a value of disabled(2) causes
these counters to become inactive for this SFCS
module.
enabled(1)
disabled(2)
other(3)rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.2 |
sfcsStatsEngineOperStatusIndicates the operational state of the SFCS switch
statistics engine for this switch module.
enabled(1)
disabled(2)
other(3)ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.3 |
sfcsStatsEngineResetResets the SFCS switch counters for this SFCS module.
Writing a value of reset(2) resets the SFCS switch
counters to 0 and causes sfcsStatsEngineOperTime
to also be reset to 0.
other(1)
reset(2)rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.4 |
sfcsStatsEngineOperTimeIndicates the amount of time (# of time ticks) that
the SFCS switch statistics have been active for this
switch module.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.5 |
sfcsPacketDiscardEngine OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.5 |
sfcsPacketDiscardEngineTableThis table contains information for the Packet Discard engine
for a particular switch module. SEQUENCE OF SfcsPacketDiscardEngineEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1 |
sfcsPacketDiscardEngineEntryEach entry contains the packet discard engine data for the
SFCS module. SfcsPacketDiscardEngineEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1 |
sfcsPacketDiscardEngineSlotIndexThe primary index to the SFCS packet discard engine table.
This identifies the chassis slot number for this SFCS
module.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.1 |
sfcsPacketDiscardEngineAdminStatusSets the administrative state of the SFCS switch
packet discard engine. Writing a value of enabled(1) causes
these packet discard registers to become active for this SFCS switch
instance. Writing a value of disabled(2) causes
these packet discard registers to become inactive for this SFCS
module.
enabled(1)
disabled(2)
other(3)rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.2 |
sfcsPacketDiscardEngineOperStatusIndicates the operational state of the SFCS switch
packet discard engine for this switch module.
enabled(1)
disabled(2)
other(3)ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.3 |
sfcsPacketDiscardEngineResetResets the SFCS switch registers for this SFCS module.
Writing a value of reset(2) resets the SFCS switch packet
discard registers to 0 and causes sfcsPacketDiscardEngineOperTime
to also be reset to 0.
other(1)
reset(2)rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.4 |
sfcsPacketDiscardEngineEPDPercentageSets the Early Packet Discard threshold percentage for every
port, and every priority on a single blade.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.5 |
sfcsPacketDiscardEngineOperTimeIndicates the amount of time (# of time ticks) that
the SFCS switch packet discard engine has been active for this
switch module.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.6 |
sfcsANIM OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.3 |
sfcsANIMConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1 |
sfcsANIMConfigTableThis table contains the configuration information for
each SFCS ANIM instance. SEQUENCE OF SfcsANIMConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1 |
sfcsANIMConfigEntryEach entry contains the SFCS config info for the SFCS
instance. SfcsANIMConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1 |
sfcsANIMConfigANIMIndexThis index specifies which ANIM we are dealing
with. This reference is in the same format as
MIB II's InterfaceIndex.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.1 |
sfcsANIMConfigAdminStatusSets the administrative state of the SFCS switch
ANIM.
enabled(1)
disabled(2)
other(3)rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.2 |
sfcsANIMConfigOperStatusIndicates the operational state of the SFCS switch
ANIM for this SFCS ANIM instance.
enabled(1)
disabled(2)
other(3)ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.3 |
sfcsANIMConfigANIMTypeIndicates the type of physical interface for this
ANIM. The types are described in ctron.oidsro OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.4 |
sfcsANIMConfigNumInterfacesIndicates the number of operational interfaces for
this ANIM.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.5 |
sfcsANIMConfigLineRateIndicates the line rate per port for this ANIM in
Mbps.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.6 |
sfcsANIMConfigToMBThis is the ANIM clock source to board.rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.7 |
sfcsANIMConfigMBClockSelectThis indicates the ANIM clock source.rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.8 |
sfcsANIMStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.2 |
sfcsANIMStatsTableThis table contains the statistics information for
each SFCS ANIM instance. SEQUENCE OF SfcsANIMStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1 |
sfcsANIMStatsEntryEach entry contains the SFCS statistics for the SFCS
instance. SfcsANIMStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1 |
sfcsANIMStatsANIMIndexThe primary index which specifies which ANIM instance
we are dealing with. This index is formatted like
MIB II's Interface Index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.1 |
sfcsANIMStatsRxCellsIndicates the number of cells received from this
ANIM's interfaces.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.2 |
sfcsANIMStatsTxCellsIndicates the number of cells transmitted from
this ANIM's interfaces.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.3 |
sfcsANIMPic OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3 |
sfcsANIMPicTableThis table contains the PIC information for
each SFCS ANIM instance. SEQUENCE OF SfcsANIMPicEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1 |
sfcsANIMPicEntryEach entry contains the SFCS PIC info for the SFCS
instance. SfcsANIMPicEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1 |
sfcsANIMPicSlotSpecific slot which the module that realizes this PIC
resides. If the PIC is associated with the chassis
and not a specific module then this value will be 0.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.1 |
sfcsANIMPicIndexUniquely identifies the instance of a PIC in a particular
slot.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.2 |
sfcsANIMPicLocationDefines location of the PIC chip. This takes on any of
the encoding values defined below for backplane, module,
daughter board, brim.ro OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.3 |
sfcsANIMPicStatusProvides the status of the specific PIC chip. the values
are defined as follows:
other(1) - firmware can not determine status
present(2) - PIC seems to be functional
notPresent(3) - PIC not found but expected
checkSum(4) - A check sum error occured
error(5) - An undefined error condition exists.
limited(6) - A limited PIC implementation only
type code information is present.ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.4 |
sfcsANIMPicVersionReflects the version of the PIC implementation that this
PIC conforms to. This has the format x.yy . If non-existent,
this object will be set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.5 |
sfcsANIMPicModuleTypeDefines the standard module type value as defined in
ctron-oids.ro OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.6 |
sfcsANIMPicMfgPNDescribes the manufacturing level part number of the module
associated with this PIC. This information is encoded as
follows:
7 Characters Part Number
2 Characters Rework Location.
If any field of this object is non-existent, it will be set
to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.7 |
sfcsANIMPicMfgSNDescribes the manufacturing level serial number of the module
associated with this PIC. This information is encoded as
follows:
3 bytes - Date code (year/week)
4 bytes - Serial number
2 bytes - Manufacture location
3 bytes - Board level revision
If any field of this object is non-existent, it will be
set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.8 |
sfcsANIMPicMfgPartNumbThis object presents the part number portion of the
ctPicMfgPN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.9 |
sfcsANIMPicMfgSerialNumbThis object presents the serial number portion of the
ctPicMfgSN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.10 |
sfcsANIMPicMfgReworkLocationThe 2 character code that defines the location this
module was last reworked. This object contains the same
information as presented in ctPicMfgPN object however
in a more human readable format. If non-existent, this
object will be set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.11 |
sfcsANIMPicMfgMfgLocationThe two character code that defines the location
this module was manufactured at. This object contains the same
information as presented in ctPicMfgSN object however
in a more human readable format. If non-existent, this object
will be set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.12 |
sfcsANIMPicMfgDateCodeThe 3 byte date code field when this module was last
reworked. This is in year/week format. This object
contains the same information as presented in ctPicMfgSN
object however in a more human readable format. If
non-existent, this object will be set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.13 |
sfcsANIMPicMfgRevisionCodeThe 3 character board level revision code field of this
module. This object contains the same information as
presented in ctPicMfgSN object however in a more human
readable format. If non-existent, this object will be set
to all blanks (ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.14 |
sfcsANIMPicTLPNDescribes the top level part number of the module associated
with this PIC. This information is encoded as follows:
7 Characters Part Number
2 Characters Rework Location.
If any field of this object is non-existent, it will be set
to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.15 |
sfcsANIMPicTLSNDescribes the top level serial number of the module
associated with this PIC. This information is encoded
as follows:
3 bytes - Date code (year/week)
4 bytes - Serial number
2 bytes - Manufacture location
3 bytes - Top level revision
If any field of this object is non-existent, it will be
set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.16 |
sfcsANIMPicTLPartNumbThis object presents the part number portion of the
ctPicTLPN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.17 |
sfcsANIMPicTLSerialNumbThis object presents the serial number portion of the
ctPicTLSN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.18 |
sfcsANIMPicTLReworkLocationThe 2 character code that defines the location this
module was last reworked. This object contains the same
information as presented in ctPicTLPN object however
in a more human readable format. If non-existent, this
object will be set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.19 |
sfcsANIMPicTLMfgLocationThe two character code that defines the location
this module was manufactured at. This object contains the same
information as presented in ctPicTLSN object however
in a more human readable format. If non-existent, this object
will be set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.20 |
sfcsANIMPicTLDateCodeThe 3 byte date code field when this module was last
reworked. This is in year/week format. This object
contains the same information as presented in ctPicTLSN
object however in a more human readable format. If
non-existent, this object will be set to all blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.21 |
sfcsANIMPicTLRevisionCodeThe 3 character top level revision code field of this module.
This object contains the same information as presented in
ctPicTLSN object however in a more human readable format.
If non-existent, this object will be set to all blanks
(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.22 |
sfcsANIMPicTLPcbRevisionDefines the Cabletron revision of the art work for this
module. If non-existent, this object will be set to all
blanks(ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.23 |
sfcsANIMPicMacAddrThe base MAC address(ethernet format)assigned to the module.
If this field is not used then it should have a value of a
zero length string. If non-existent, this object will be set
to all blanks(ascii 32).ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.24 |
sfcsANIMPicNumbRsvdAddrsThe number of reserved MAC addresses starting at the
address as defined in ctPicMacAddr. If no MAC addresses
are reserved this object should have a value of 0.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.25 |
sfcsANIMPicBoardLevelRevisionDefines the Cabletron board level revision level code for
this module. If non-existent, this object will be set to
blanks (ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.26 |
sfcsANIMPicModuleTypeStringDescribes the module associated with this PIC in a
human readable format. If non-existent, this object
will be set to blanks (ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.27 |
sfcsANIMPicDcDcConverterTypeDescribes the voltage of the installed DCDC Converter
input and output lines.
If the Module does not contain a DCDC Converter
this object will be set to blanks (ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.28 |
sfcsANIMPicDcDcConverterInputPowerDescribes the maximum allowed input power
for the DCDC input line.
If the Module does not contain a DCDC Converter
this object will be set to blanks (ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.29 |
sfcsANIMPicSmb1PromVersionDescribes the current version of the SMB1 prom.
If the Module does not contain an SMB1 prom
this object will be set to blanks (ascii 32).ro DisplayString .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.30 |
sfcsInterface OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.4 |
sfcsInterfaceConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.4.1 |
sfcsInterfaceConfigTableThis table contains the configuration information of each
configured SFCS switch interface. If SFCS is not configured
on a port, than an entry will not exist. SEQUENCE OF SfcsInterfaceConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1 |
sfcsInterfaceConfigEntryEach entry specifies the SFCS configuration for the SFCS
switch interface for which the entry exists. SfcsInterfaceConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1 |
sfcsInterfaceConfigInterfaceIndexThe index which specifies which interface we are
dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.1 |
sfcsInterfaceConfigTypeSets the type of interface access attribute for the SFCS
interfaces. Access ports allow single user or shared
access and perform statisics and control; network ports
are equivalent to trunk ports with no access control;
host management port indicates the (virtual) port to which
the (internal) management agent is attached; host control
port indicates the port to redirect non-management packets.
other(1)
access-port(2)
network-port(3)
host-mgmt-port(4)
host-ctl-port(5)rodeprecated Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.2 |
sfcsInterfacePeakBufferUseageAn accumulated snap shot of the current peak queue depth
for the configured buffer queues. This information is
obtained from a read/reset register.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.3 |
sfcsInterfaceConfigNumberOfQueuesIndicates the number of priority queues configured on this
interface.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.4 |
sfcsInterfaceConfigSigStackIDIndicates the user signalling stack ID for this interface.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.5 |
sfcsInterfaceConfigClockingSourceThe interface clocking source.rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.6 |
sfcsInterfaceStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2 |
sfcsInterfaceStatsTableThis table contains the cell counts for each
SFCS switch interface. SEQUENCE OF SfcsInterfaceStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1 |
sfcsInterfaceStatsEntrySpecifies the SFCS cell counts for the SFCS
interface for which this entry exists. SfcsInterfaceStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1 |
sfcsInterfaceStatsInterfaceIndexThe index which specifies which interface we are
dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.1 |
sfcsInterfaceStatsRxErrorsIndicates the number of receive path lookup
invalid and out of range errors.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.2 |
sfcsInterfaceStatsVPILookupInvalidErrorsIndicates the number of VPI lookup invalid and out of
range errors.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.3 |
sfcsInterfaceStatsRxCnxLookupInvalidErrorsIndicates the number of receive connection lookup
invalid errors.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.4 |
sfcsInterfaceStatsRxCellCntIndicates the number of receive cells on
this interface.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.5 |
sfcsInterfaceStatsTxCellCntIndicates the number of transmit cells
on this interface.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.6 |
sfcsInterfaceStatsOverflowDropCellCntIndicates the number of cells that were
dropped due to queue overflows.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.7 |
sfcsQueue OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.5 |
sfcsQueueConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1 |
sfcsQueueConfigTableThis table contains the configuration information for
all queues on the SFCS. SEQUENCE OF SfcsQueueConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1 |
sfcsQueueConfigEntryEach entry specifies the queue information for the
SFCS switch for which the entry exists. SfcsQueueConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1 |
sfcsQueueConfigInterfaceIndexThe index which specifies which interface we are
dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.1 |
sfcsQueueConfigQueueIndexThe index which specifies which transmit queue we
are dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.2 |
sfcsQueueConfigQueueSizeIndicates the size of the transmit queue for this
queue instance.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.3 |
sfcsQueueConfigQueueBandwidthIndicates the percentage of this interface's bandwidth
utilized by this particular queue.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.4 |
sfcsQueueConfigClpDropThresholdIndicates the queue level to start dropping CLP=1
cells for this queue. This level is expressed as
the percentage of this queue's size.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.5 |
sfcsQueueConfigCongestionThresholdIndicates the level to consider this queue congested.
This level is expressed as the percentage of this
queue's size.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.6 |
sfcsQueueConfigEFCILowThresholdIndicates the lower threshold used for EFCI for
this queue instance. This level is expressed as
the percentage of this queue's size.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.7 |
sfcsQueueConfigRMThresholdIndicates the remote management queue threshold expressed
as a percentage of the queue's size. When this level is
hit, a management message is sent to the sender notifying it
to slow down.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.8 |
sfcsQueueConfigEPDThresholdIndicates the Early Packet Discard threshold expressed
as a percentage of the queue's size. When this level is
exceeded the Transmit ASIC starts to drop all cells entering
this queue.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.9 |
sfcsQueueStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.2 |
sfcsQueueStatsTableThis table contains the statistics information for all
queues on the SFCS. SEQUENCE OF SfcsQueueStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1 |
sfcsQueueStatsEntryEach entry specifies the queue information for the
SFCS switch for which the entry exists. SfcsQueueStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1 |
sfcsQueueStatsInterfaceIndexThe index which specifies which interface we are
dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.1 |
sfcsQueueStatsQueueThe index which specifies which queue we are
dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.2 |
sfcsQueueStatsTxClpCellsDiscardedIndicates the number of cells with CLP=1 that were
discarded for this queue instance.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.3 |
sfcsQueueStatsTxCellsDroppedIndicates the number of cells that overflowed the
buffer for this queue instance.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.4 |
sfcsQueueStatsQueuePeakLevelIndicates the peak level since last read for this
queue instance.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.5 |
sfcsQueueStatsTxCellCntIndicates the transmit cell count on a per queue basis.
A value of zero indicates not availablero OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.6 |
sfcsConnection OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.7 |
sfcsConnectionConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1 |
sfcsCnxCfgTableThis table contains the connection configuration
information. SEQUENCE OF SfcsCnxCfgEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1 |
sfcsCnxCfgEntryEach entry specifies the connection configuration
information for the SFCS switch connection instance. SfcsCnxCfgEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1 |
sfcsCnxCfgCrossConnectIndexA unique value to identify this cross-connect.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.1 |
sfcsCnxCfgCrossConnectLowIfIndexThe value of this object is equal to the low
MIB II IfIndex value of the ATM interface port
for this cross-connect.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.2 |
sfcsCnxCfgCrossConnectLowVpiThe value of this object is equal to the low VPI
value at the ATM interface associated with the
cross-connect that is identified by
sfcsCnxCfgCrossConnectIndex.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.3 |
sfcsCnxCfgCrossConnectLowVciThe value of this object is equal to the low VCI
value at the ATM interface associated with this
cross-connect that is identified by
sfcsCnxCfgCrossConnectIndex.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.4 |
sfcsCnxCfgCrossConnectHighIfIndexThe value of this object is equal to the high
MIB II IfIndex value of the ATM interface port
for this cross-connect.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.5 |
sfcsCnxCfgCrossConnectHighVpiThe value of this object is equal to the high VPI
value at the ATM interface associated with the
cross-connect that is identified by
sfcsCnxCfgCrossConnectIndex.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.6 |
sfcsCnxCfgCrossConnectHighVciThe value of this object is equal to the high VCI
value at the ATM interface associated with this
cross-connect that is identified by
sfcsCnxCfgCrossConnectIndex.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.7 |
sfcsCnxCfgTypeIndicates the connection type for this VC.
point-to-point-vpl(1)
point-to-mpoint-vpl(2)
mpoint-to-mpoint-vpl(3)
point-to-point-vcl(4)
point-to-mpoint-vcl(5)
mpoint-to-mpoint-vcl(6)ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.8 |
sfcsCnxCfgTmTypeIndicates the type of traffic management used on this VC.
other (1)
efci (2)
er (3)ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.9 |
sfcsCnxCfgUPCEnableIndicates whether or not UPC policing is enabled on
this VC. A VC can be bi-directional or uni-directional.
Due to this, the UPC bit is a masking based on directionality.
Where direction is in terms of high interface (H) and low
interface (L). (Where not specified, assume disabled.)
L to H UPC enabled(1)
L to H Tagging enabled(2)
L to H UPC/Tagging enabled(3)
H to L UPC enabled(4)
L to H UPC enabled & H to L UPC enabled(5)
L to H Tagging enabled & H to L UPC enabled(6)
L to H UPC/Tagging enabled & H to L UPC enabled(7)
H to L Tagging enabled(8)
L to H UPC enabled & H to L Tagging enabled(9)
L to H Tagging enabled & H to L Tagging enabled(10)
L to H UPC/Tagging enabled & H to L Tagging enabled(11)
H to L UPC/Tagging enabled(12)
L to H UPC enabled & H to L UPC/Tagging enabled(13)
L to H Tagging enabled and H to L UPC/Tagging enabled(14)
L to H UPC/Tagging enabled & H to L UPC/Tagging enabled(15)ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.10 |
sfcsCnxCfgStatsEnableIndicates whether statistics will be kept on this VC.
enabled(1)
disabled(2)
other(3)ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.11 |
sfcsCnxCfgStatsTableCounterSizesIndicates the size of the drop counter for this VC.
thirtytwobittagcounter (1)
thirtytwobitdropcounter (2)
sixteenbiteachcounter (3)ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.12 |
sfcsCnxCfgOwnerIndicates the owner of this cross connect.
other(1)
own(2)
dontown(3)ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.13 |
sfcsConnectionStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2 |
sfcsCnxStatsTableThis table contains the connection configuration
information. SEQUENCE OF SfcsCnxStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1 |
sfcsCnxStatsEntryEach entry specifies the connection statistics
information for the SFCS switch connection instance. SfcsCnxStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1 |
sfcsCnxStatsCrossConnectIndexA unique value to identify this cross-connect.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.1 |
sfcsCnxStatsCrossConnectLowIfIndexThe value of this object is equal to the low
MIB II IfIndex value of the ATM interface port
for this cross-connect.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.2 |
sfcsCnxStatsCrossConnectLowVpiThe value of this object is equal to the low VPI
value at the ATM interface associated with the
cross-connect that is identified by
sfcsCnxStatsCrossConnectIndex.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.3 |
sfcsCnxStatsCrossConnectLowVciThe value of this object is equal to the low VCI
value at the ATM interface associated with this
cross-connect that is identified by
sfcsCnxStatsCrossConnectIndex.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.4 |
sfcsCnxStatsCrossConnectHighIfIndexThe value of this object is equal to the high
MIB II IfIndex value of the ATM interface port
for this cross-connect.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.5 |
sfcsCnxStatsCrossConnectHighVpiThe value of this object is equal to the high VPI
value at the ATM interface associated with the
cross-connect that is identified by
sfcsCnxStatsCrossConnectIndex.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.6 |
sfcsCnxStatsCrossConnectHighVciThe value of this object is equal to the high VCI
value at the ATM interface associated with this
cross-connect that is identified by
sfcsCnxStatsCrossConnectIndex.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.7 |
sfcsCnxStatsLoToHiHTxCellsIndicates the transmitted cell count for this connection.
This entry specifies the count from the low port/vpi/vci
to the high port/vpi/vciro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.8 |
sfcsCnxStatsLoToHiDroppedCellsIndicates the dropped cell count for this connection
instance. This entry specifies the count from the low
port/vpi/vci to the high port/vpi/vci.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.9 |
sfcsCnxStatsLoToHiTaggedCellsIndicates the tagged cell count for this connection
instance. This entry specifies the count from the low
port/vpi/vci to the high port/vpi/vci.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.10 |
sfcsCnxStatsHiToLoHTxCellsIndicates the transmitted cell count for this connection.
This entry specifies the count from the high port/vpi/vci
to the low port/vpi/vciro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.11 |
sfcsCnxStatsHiToLoDroppedCellsIndicates the dropped cell count for this connection
instance. This entry specifies the count from the high
port/vpi/vci to the low port/vpi/vci.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.12 |
sfcsCnxStatsHiToLoTaggedCellsIndicates the tagged cell count for this connection
instance. This entry specifies the count from the high
port/vpi/vci to the low port/vpi/vci.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.13 |
sfcsConnectionError OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.7.3 |
sfcsCnxErrorTableThis table contains the connection error information
supplied by the atmAPI mib. SEQUENCE OF SfcsCnxErrorEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1 |
sfcsCnxErrorEntryA list of VCC connection request failures. This table
is indexed the same way as the atmVcCrossConnectTable
in the AToM mib. SfcsCnxErrorEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1 |
sfcsCnxErrorCodeSpecifies the error reason for failure of the
connection setup.
01 fatal_error
02 moe_table_out_of_range
03 moe_mem_not_allocated
04 mem_fetch_double_reqst
05 lo_port_invalid
06 lo_port_locked
07 lo_vpi_invalid
08 lo_vci_invalid
09 hi_port_invalid
10 hi_port_locked
11 hi_vpi_invalid
12 hi_vci_invalid
13 trfc_desc_l2h_invalid
14 trfc_desc_h2l_invalid
15 ccid_invalid
16 ccid_not_assigned
17 atm_api_type_invalid
18 atm_api_verb_invalid
19 pt_to_pt_over_write_reqst
20 pt_reqst_over_mpt_conn
21 mask_table_full
22 duplicate_request
23 moe_table_out_of_memory
24 vpi0_non_term_reqst
25 hardware_out_of_heap
26 tx_conn_table_out_of_mem
27 tx_conn_table_time_out
28 ctm_communication_error
29 connection_table_out_of_sync
30 invalid_connection_entry
31 ctm_resource_alloc_error
32 front_panel_bandwidth_alloc_error
33 ccid_in_usero OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.1 |
sfcsCnxErrorTimeStampIndicates the value of the sysUpTime when this
connection request failed. We will support this
field only if the element management uses this
table.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.2 |
sfcsCnxErrorRowStatusThe administrative control of this entry. The owner
could delete this entry after reading it, to prevent
this table from growing too big.
other (1)
inactive (2)
active (3)
delete (4)rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.3 |
sfcsConnectionAPI OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.8 |
sfcsCnxAPIEntryThe connection API leaf provides a method for contool for creating
PVCs. This always returns a value of 0.ro INTEGER (1) .1.3.6.1.4.1.52.4.1.2.11.1.1.8.1 |
sfcsCTM OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.9 |
sfcsCTMInterfaceConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1 |
sfcsCTMInterfaceConfigTableThis table contains the configuration information of each
configured SHEMP interface. If SFCS is not configured
on a port, than an entry will not exist. SEQUENCE OF SfcsCTMInterfaceConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1 |
sfcsCTMInterfaceConfigEntryEach entry specifies the SFCS configuration for the SFCS
switch interface for which the entry exists. SfcsCTMInterfaceConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1 |
sfcsCTMInterfaceConfigInterfaceIndexThe index which specifies which interface we are
dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.1 |
sfcsCTMInterfaceConfigTypeSets the type of interface access attribute for the SFCS
interfaces. Access ports allow single user or shared
access and perform statisics and control; network ports
are equivalent to trunk ports with no access control;
host management port indicates the (virtual) port to which
the (internal) management agent is attached; host control
port indicates the port to redirect non-management packets.
other(1),
access-port(2),
network-port(3),
host-mgmt-port(4),
host-ctl-port(5)ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.2 |
sfcsCTMInterfacePeakBufferUseageIndicates the number of cells in transmit buffer memory.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.3 |
sfcsCTMInterfaceConfigNumberOfQueuesIndicates the number of priority queues configured on this
interface.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.4 |
sfcsCTMInterfaceConfigSigStackIDIndicates the user signalling stack ID for this interface.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.5 |
sfcsCTMInterfaceConfigClockingThe anim clocking source.
one - use the generated-transmit-clock
two - use the channel-recovered-clock
three - use the system-master-clock
four - option not supported by this interfacerw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.6 |
sfcsCTMInterfaceConfigNextVPIIndicates the next vpi for this interface.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.7 |
sfcsCTMInterfaceConfigNextVCIIndicates the next vci for this interface.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.8 |
sfcsCTMInterfaceStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2 |
sfcsCTMInterfaceStatsTableThis table contains the cell counts for each
SFCS switch interface. SEQUENCE OF SfcsCTMInterfaceStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1 |
sfcsCTMInterfaceStatsEntrySpecifies the SFCS cell counts for the SFCS
interface for which this entry exists. SfcsCTMInterfaceStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1 |
sfcsCTMInterfaceStatsInterfaceIndexThe index which specifies which interface we are
dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.1 |
sfcsCTMInterfaceStatsRxErrorsIndicates the number of receive path lookup
invalid and out of range errors.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.2 |
sfcsCTMInterfaceStatsVPILookupInvalidErrorsIndicates the number of VPI lookup invalid and out of
range errors.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.3 |
sfcsCTMInterfaceStatsRxCnxLookupInvalidErrorsIndicates the number of receive connection lookup
invalid errors.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.4 |
sfcsCTMInterfaceStatsRxCellCntIndicates the number of receive cells on
this interface.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.7 |
sfcsCTMInterfaceStatsTxCellCntIndicates the number of transmit cells
on this interface.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.8 |
sfcsCTMInterfaceStatsOverflowDropCellCntIndicates the number of cells that were
dropped due to queue overflows.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.9 |
sfcsCTMQueueConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3 |
sfcsCTMQueueConfigTableThis table contains the configuration information for
all queues on the SFCS. SEQUENCE OF SfcsCTMQueueConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1 |
sfcsCTMQueueConfigEntryEach entry specifies the queue information for the
SFCS switch for which the entry exists. SfcsCTMQueueConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1 |
sfcsCTMQueueConfigInterfaceIndexThe index which specifies which interface we are
dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.1 |
sfcsCTMQueueConfigQueueIndexThe index which specifies which transmit queue we
are dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.2 |
sfcsCTMQueueConfigQueueSizeIndicates the size of the transmit queue for this
queue instance.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.3 |
sfcsCTMQueueConfigQueueBandwidthIndicates the percentage of this interface's bandwidth
utilized by this particular queue.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.4 |
sfcsCTMQueueConfigClpDropThresholdIndicates the queue level to start dropping CLP=1
cells for this queue. This level is expressed as
the percentage of this queue's size.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.5 |
sfcsCTMQueueConfigCongestionThresholdIndicates the level to consider this queue congested.
This level is expressed as the percentage of this
queue's size.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.6 |
sfcsCTMQueueConfigEFCILowThresholdIndicates the lower threshold used for EFCI for
this queue instance. This level is expressed as
the percentage of this queue's size.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.7 |
sfcsCTMQueueConfigRMThresholdIndicates the remote management queue threshold expressed
as a percentage of the queue's size. When this level is
hit, a management message is sent to the sender notifying it
to slow down.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.8 |
sfcsCTMQueueStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.4 |
sfcsCTMQueueStatsTableThis table contains the statistics information for all
queues on the SFCS. SEQUENCE OF SfcsCTMQueueStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1 |
sfcsCTMQueueStatsEntryEach entry specifies the queue information for the
SFCS switch for which the entry exists. SfcsCTMQueueStatsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1 |
sfcsCTMQueueStatsInterfaceIndexThe index which specifies which interface we are
dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.1 |
sfcsCTMQueueStatsQueueThe index which specifies which queue we are
dealing with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.2 |
sfcsCTMQueueStatsTxClpCellsDiscardedIndicates the number of cells with CLP=1 that were
discarded for this queue instance.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.3 |
sfcsCTMQueueStatsTxCellsDroppedIndicates the number of cells that overflowed the
buffer for this queue instance.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.4 |
sfcsCTMQueueStatsQueuePeakLevelIndicates the peak level since last read for this
queue instance.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.5 |
sfcsCTMQueueStatsTxCellCntIndicates the transmit cell count on a per queue basis.
A value of zero indicates not availablero OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.6 |
sfcsBWMgr OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.12 |
sfcsBwNims OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.1 |
sfcsBwNimsTableThis table contains the Nim Oid and the Nim Administrative Status
reading functions. SEQUENCE OF SfcsBwNimsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1 |
sfcsBwNimsEntryEach entry contains a Nim Oid and the Nim Administrative Status. SfcsBwNimsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1 |
sfcsBwNimsIndexThis index specifies which NIM we are dealing
with. This reference is in the same format as MIB II's
Interface index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.1 |
sfcsBwNimsAdminStatusIndicates the administrative status of this Nim.
10 - Active
20 - Inactiverw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.2 |
sfcsBWNimsBuffCountThe number of transmit buffers for this NIMro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.3 |
sfcsBWNimsPortCountThe number of ports for this NIMro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.4 |
sfcsBWNimsPrioCountThe number of priority queues for this NIMro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.5 |
sfcsBwPorts OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.2 |
sfcsBwPortsTableThis table contains the Port Oid, Port Administrative Status and
the forward/reverse physical bandwidth reading functions. SEQUENCE OF SfcsBwPortsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1 |
sfcsBwPortsEntryEach entry contains the Port Oid, Port Administrative Status and
the forward/reverse physical bandwidth. SfcsBwPortsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1 |
sfcsBwPortsIndexThis index specifies which Port we are dealing
with. This reference is in the same format as MIB II's
Interface index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.1 |
sfcsBwPortsAdminStatusIndicates the administrative status of this Port.
10 - Active
20 - Inactiverw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.2 |
sfcsBwPortsPhysBwFwdThis is the forward physical bandwidth of the port in cells/sec.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.3 |
sfcsBwPortsPhysBwRevThis is the reverse physical bandwidth of the port in cells/sec.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.4 |
sfcsBwPortsZoneThe range of the current bw operational point for this port. If a value has never been set the value will be -1.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.5 |
sfcsBwPortsMetricThe current bw operational point for this port. If a value has never been set the value will be -1.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.6 |
sfcsBwPortPools OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3 |
sfcsBwPortPoolLimitsTableThis table contains SEQUENCE OF SfcsBwPortPoolLimitsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1 |
sfcsBwPortPoolLimitsEntryEach entry contains SfcsBwPortPoolLimitsEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1 |
sfcsBwPortPoolLimitsIndexThis index specifies which Port we are dealing
with. This reference is in the same format as MIB II's
Interface index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.1 |
sfcsBwPortPoolLimitsPoolIndexThis index specifies which Pool within Port we are dealing
with. This reference is in the same format as MIB II's
Interface index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.2 |
sfcsBwPortPoolLimitsMaxAllocBwFwdUpper Limit for BW to be allocated forward direction. It is defaulted to
the physical BW and is set by administrative action. Can't be set to
a value greater than physical BWrw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.3 |
sfcsBwPortPoolLimitsMaxAllocBwRevUpper Limit for BW to be allocated reverse direction. It is defaulted to
the physical BW and is set by administrative action. Can't be set to
a value greater than physical BWrw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.4 |
sfcsBwPortPoolLimitsBwAllocStratDetermines which of 3 sets of formulas will be used for computing
the amount of variable bandwidth to be allocated.
Conservative allocates the full amount of variable bandwidth,
Moderate allocates approximately half of the variable bandwidth,
Liberal supports very aggressive allocation and should only be
used with caution. Conservative is the default.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.5 |
sfcsBwPortPoolLimitsBwConstantA ratio used in formulas for computing the amount of variable
bandwidth to be allocated. Valid values are 1-255 which is the
numerator of a fraction whose fixed denominator is 256. Thus
the value 255 is really 255/256 the most conservative value;
the value 1 is really 1/256 the most liberal value; the value
128 is really 128/256 or 50%. The default is 50%.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.6 |
sfcsBwPortPoolLimitsCBRLimitFwdA ratio used in allocating the allocatable bandwidth among the
various Service classes. This value is the amount of the overall
allocatable bw that can be allocated to CBR. The values are 1-255.
For a more detailed description of value useage see
sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a
given direction should not exceed 256. (If it has never been set,
the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.7 |
sfcsBwPortPoolLimitsCBRLimitRevA ratio used in allocating the allocatable bandwidth among the
various Service classes. This value is the amount of the overall
allocatable bw that can be allocated to CBR. The values are 1-255.
For a more detailed description of value useage see
sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a
given direction should not exceed 256. (If it has never been set,
the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.8 |
sfcsBwPortPoolLimitsABRLimitFwdA ratio used in allocating the allocatable bandwidth among the
various Service classes. This value is the amount of the overall
allocatable bw that can be allocated to ABR. The values are 1-255.
For a more detailed description of value useage see
sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a
given direction should not exceed 256. (If it has never been set,
the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.9 |
sfcsBwPortPoolLimitsABRLimitRevA ratio used in allocating the allocatable bandwidth among the
various Service classes. This value is the amount of the overall
allocatable bw that can be allocated to ABR. The values are 1-255.
For a more detailed description of value useage see
sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a
given direction should not exceed 256. (If it has never been set,
the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.10 |
sfcsBwPortPoolLimitsVBRLimitFwdA ratio used in allocating the allocatable bandwidth among the
various Service classes. This value is the amount of the overall
allocatable bw that can be allocated to VBR. The values are 1-255.
For a more detailed description of value useage see
sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a
given direction should not exceed 256. (If it has never been set,
the value will be -1.)
WARNING - Setting this limit to an arbitrarily low value may
cause the switch to become inoperable as an SVC switch. PNNI
establishes VBR connections for switch to switch communications.
If an arbitrarily low limit is established, it may preclude
PNNI inter-switch operability.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.11 |
sfcsBwPortPoolLimitsVBRLimitRevA ratio used in allocating the allocatable bandwidth among the
various Service classes. This value is the amount of the overall
allocatable bw that can be allocated to VBR. The values are 1-255.
For a more detailed description of value useage see
sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a
given direction should not exceed 256. (If it has never been set,
the value will be -1.)
WARNING - Setting this limit to an arbitrarily low value may
cause the switch to become inoperable as an SVC switch. PNNI
establishes VBR connections for switch to switch communications.
If an arbitrarily low limit is established, it may preclude
PNNI inter-switch operability.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.12 |
sfcsBwPortPoolLimitsUBRLimitFwdA ratio used in allocating the allocatable bandwidth among the
various Service classes. This value is the amount of the overall
allocatable bw that can be allocated to UBR. The values are 1-255.
For a more detailed description of value useage see
sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a
given direction should not exceed 256. (If it has never been set,
the value will be -1.)
WARNING - Setting this limit to an arbitrarily low value may
cause the switch to become inoperable as an SVC switch. Many
internal management functions use UBR connections to establish
connections with neighboring switches for keep alive and
discovery functions.
If an arbitrarily low limit is established, it may preclude
SVC inter-switch operability.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.13 |
sfcsBwPortPoolLimitsUBRLimitRevA ratio used in allocating the allocatable bandwidth among the
various Service classes. This value is the amount of the overall
allocatable bw that can be allocated to UBR. The values are 1-255.
For a more detailed description of value useage see
sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a
given direction should not exceed 256. (If it has never been set,
the value will be -1.)
WARNING - Setting this limit to an arbitrarily low value may
cause the switch to become inoperable as an SVC switch. Many
internal management functions use UBR connections to establish
connections with neighboring switches for keep alive and
discovery functions.
If an arbitrarily low limit is established, it may preclude
SVC inter-switch operability.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.14 |
sfcsBwPortPoolLimitsUBRConnLimitFwdA Limit to the number of UBR connections which can be established
through this port. The limit applies to both user connections and
management connections. The default is no limit. (If it has never
been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.15 |
sfcsBwPortPoolLimitsUBRConnLimitRevA Limit to the number of UBR connections which can be established
through this port. The limit applies to both user connections and
management connections. The default is no limit. (If it has never
been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.16 |
sfcsBwPortPoolStatTableThis table contains SEQUENCE OF SfcsBwPortPoolStatEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2 |
sfcsBwPortPoolStatEntryEach entry contains SfcsBwPortPoolStatEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1 |
sfcsBwPortPoolStatsIndexThis index specifies which Port we are dealing
with. This reference is in the same format as MIB II's
Interface index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.1 |
sfcsBwPortPoolStatsPoolIndexThis index specifies which Pool within Port we are dealing
with. This reference is in the same format as MIB II's
Interface index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.2 |
sfcsBwPortPoolStatConnCntFwdThe current total number of calls in the forward direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.3 |
sfcsBwPortPoolStatConnCntRevThe current total number of calls in the reverse direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.4 |
sfcsBwPortPoolStatAllocBwFwdThe current amount of allocated Bw in the forward direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.5 |
sfcsBwPortPoolStatAllocBwRevThe current amount of allocated Bw in the reverse direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.6 |
sfcsBwPortPoolStatAvailBwFwdThe current amount of available Bw in the forward direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.7 |
sfcsBwPortPoolStatAvailBwRevThe current amount of available Bw in the reverse direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.8 |
sfcsBwPortPoolStatPeakBwFwdThe peak amount of allocated Bw in the forward direction since the
port was initialized OR the switch was reset.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.9 |
sfcsBwPortPoolStatPeakBwRevThe peak amount of allocated Bw in the reverse direction since the
port was initialized OR the switch was reset.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.10 |
sfcsBwPortPoolStatRejConnFwdThe number of connections which were rejected because of
insufficient forward bandwidth since the port was initialized or
the switch was reset last.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.11 |
sfcsBwPortPoolStatRejConnRevThe number of connections which were rejected because of
insufficient reverse bandwidth since the port was initialized or
the switch was reset last.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.12 |
sfcsBwPortPoolStatPrevAdverMAXCRFwdThe amount of physical forward BW reported to PNNI in the latest
reporting period.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.13 |
sfcsBwPortPoolStatPrevAdverMAXCRRevThe amount of physical reverse BW reported to PNNI in the latest
reporting period.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.14 |
sfcsBwPortPoolStatPrevAdverAvailCRFwdThe amount of avail forward BW reported to PNNI in the latest
reporting period.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.15 |
sfcsBwPortPoolStatPrevAdverAvailCRRevThe amount of avail reverse BW reported to PNNI in the latest
reporting period.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.16 |
sfcsBwPortPoolStatCBRConnCntFwdThe number of currently established CBR connections for the forward
direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.17 |
sfcsBwPortPoolStatCBRConnCntRevThe number of currently established CBR connections for the reverse
direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.18 |
sfcsBwPortPoolStatCBRConnRejFwdThe number of CBR forward connections rejected since the port was
initialized or the switch was reset last.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.19 |
sfcsBwPortPoolStatCBRConnRejRevThe number of CBR reverse connections rejected since the port was
initialized or the switch was reset last.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.20 |
sfcsBwPortPoolStatCBRAllocBwFwdThe amount of forward allocated Bw that is CBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.21 |
sfcsBwPortPoolStatCBRAllocBwRevThe amount of reverse allocated Bw that is CBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.22 |
sfcsBwPortPoolStatCBRAggPCRFwdThe aggregated forward PCR for all established CBR connections.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.23 |
sfcsBwPortPoolStatCBRAggPCRRevThe aggregated reverse PCR for all established CBR connections.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.24 |
sfcsBwPortPoolStatCBRPrevAdverMAXCTDThe maxCTD for the forward direction reported to PNNI for the last
update period for CBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.25 |
sfcsBwPortPoolStatCBRPrevAdverCDVThe CDV for the forward direction reported to PNNI for the last
update period for CBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.26 |
sfcsBwPortPoolStatABRConnCntFwdThe number of currently established ABR connections for the forward
direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.27 |
sfcsBwPortPoolStatABRConnCntRevThe number of currently established ABR connections for the reverse
direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.28 |
sfcsBwPortPoolStatABRConnRejFwdThe number of ABR forward connections rejected since the port was
initialized or the switch was reset last.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.29 |
sfcsBwPortPoolStatABRConnRejRevThe number of ABR reverse connections rejected since the port was
initialized or the switch was reset last.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.30 |
sfcsBwPortPoolStatABRAllocBwFwdThe amount of forward allocated Bw that is ABR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.31 |
sfcsBwPortPoolStatABRAllocBwRevThe amount of reverse allocated Bw that is ABR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.32 |
sfcsBwPortPoolStatABRAggPCRFwdThe aggregated forward PCR for all established ABR connections.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.33 |
sfcsBwPortPoolStatABRAggPCRRevThe aggregated reverse PCR for all established ABR connections.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.34 |
sfcsBwPortPoolStatABRPrevAdverMAXCTDThe maxCTD for the forward direction reported to PNNI for the last
update period for ABR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.35 |
sfcsBwPortPoolStatABRPrevAdverCDVThe CDV for the forward direction reported to PNNI for the last
update period for ABR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.36 |
sfcsBwPortPoolStatVBRConnCntFwdThe number of currently established VBR connections for the forward
direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.37 |
sfcsBwPortPoolStatVBRConnCntRevThe number of currently established VBR connections for the reverse
direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.38 |
sfcsBwPortPoolStatVBRConnRejFwdThe number of VBR forward connections rejected since the port was
initialized or the switch was reset last.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.39 |
sfcsBwPortPoolStatVBRConnRejRevThe number of VBR reverse connections rejected since the port was
initialized or the switch was reset last.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.40 |
sfcsBwPortPoolStatVBRAllocBwFwdThe amount of forward allocated Bw that is VBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.41 |
sfcsBwPortPoolStatVBRAllocBwRevThe amount of reverse allocated Bw that is VBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.42 |
sfcsBwPortPoolStatVBRAggPCRFwdThe aggregated forward PCR for all established VBR connections.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.43 |
sfcsBwPortPoolStatVBRAggPCRRevThe aggregated reverse PCR for all established VBR connections.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.44 |
sfcsBwPortPoolStatVBRPrevAdverMAXCTDThe maxCTD for the forward direction reported to PNNI for the last
update period for VBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.45 |
sfcsBwPortPoolStatVBRPrevAdverCDVThe CDV for the forward direction reported to PNNI for the last
update period for VBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.46 |
sfcsBwPortPoolStatUBRConnCntFwdThe number of currently established UBR connections for the forward
direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.47 |
sfcsBwPortPoolStatUBRConnCntRevThe number of currently established UBR connections for the reverse
direction.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.48 |
sfcsBwPortPoolStatUBRConnRejFwdThe number of UBR forward connections rejected since the port was
initialized or the switch was reset last.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.49 |
sfcsBwPortPoolStatUBRConnRejRevThe number of UBR reverse connections rejected since the port was
initialized or the switch was reset last.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.50 |
sfcsBwPortPoolStatUBRAllocBwFwdThe amount of forward allocated Bw that is UBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.51 |
sfcsBwPortPoolStatUBRAllocBwRevThe amount of reverse allocated Bw that is UBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.52 |
sfcsBwPortPoolStatUBRAggPCRFwdThe aggregated forward PCR for all established UBR connections.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.53 |
sfcsBwPortPoolStatUBRAggPCRRevThe aggregated reverse PCR for all established UBR connections.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.54 |
sfcsBwPortPoolStatUBRPrevAdverMAXCTDThe maxCTD for the forward direction reported to PNNI for the last
update period for UBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.55 |
sfcsBwPortPoolStatUBRPrevAdverCDVThe CDV for the forward direction reported to PNNI for the last
update period for UBR service class.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.56 |
sfcsBwPortPoolTrapMgmtTableThis table contains SEQUENCE OF SfcsBwPortPoolTrapMgmtEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3 |
sfcsBwPortPoolTrapMgmtEntryEach entry contains SfcsBwPortPoolTrapMgmtEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1 |
sfcsBwPortPoolTrapMgmtIndexThis index specifies which Port we are dealing
with. This reference is in the same format as MIB II's
Interface index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.1 |
sfcsBwPortPoolTrapMgmtPoolIndexThis index specifies which Pool within Port we are dealing
with. This reference is in the same format as MIB II's
Interface index. (If it has never been set, the value will
be -1.)ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.2 |
sfcsBwPortPoolTrapMgmtAllocBwTholdHiFwdThe upper threshold for the Alloc BW fwd trap. When an allocation
causes the currently allocated bw to exceed this value the trap
is generated. (If it has never been set, the value will
be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.3 |
sfcsBwPortPoolTrapMgmtAllocBwTholdHiRevThe upper threshold for the Alloc BW rev trap. When an allocation
causes the currently allocated bw to exceed this value the trap
is generated. (If it has never been set, the value will
be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.4 |
sfcsBwPortPoolTrapMgmtAllocBwTholdLoFwdThe lower threshold for the Alloc BW fwd trap. When an allocation
causes the currently allocated bw be below this value the trap
is generated. (If it has never been set, the value will
be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.5 |
sfcsBwPortPoolTrapMgmtAllocBwTholdLoRevThe lower threshold for the Alloc BW rev trap. When an allocation
causes the currently allocated bw be below this value the trap
is generated. (If it has never been set, the value will
be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.6 |
sfcsBwPortPoolTrapMgmtPeakBwTholdFwdThe upper threshold for the Peak BW fwd trap. When an allocation
causes the allocated BW to exceed this value the trap is generated.
(If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.7 |
sfcsBwPortPoolTrapMgmtPeakBwTholdRevThe upper threshold for the Peak BW rev trap. When an allocation
causes the allocated BW to exceed this value the trap is generated.
(If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.8 |
sfcsBwPortPoolTrapMgmtHoldDownTimeThe time between traps of the same type. If a trap of a particular
type is generated for a particular port, another of that type for that
port will not be generated until the hold down time has expired.
(If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.9 |
sfcsBwPortPoolTrapMgmtCBRConnCntTholdHiFwdThe upper threshold for the CBR connection count Fwd trap. When an
allocation causes the CBR connection count to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.10 |
sfcsBwPortPoolTrapMgmtCBRConnCntTholdHiRevThe upper threshold for the CBR connection count Rev trap. When an
allocation causes the CBR connection count to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.11 |
sfcsBwPortPoolTrapMgmtCBRConnCntTholdLoFwdThe lower threshold for the CBR connection count Fwd trap. When an
allocation causes the CBR connection count to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.12 |
sfcsBwPortPoolTrapMgmtCBRConnCntTholdLoRevThe lower threshold for the CBR connection count Rev trap. When an
allocation causes the CBR connection count to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.13 |
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiFwdThe upper threshold for the CBR Allocated Bw Fwd trap. When an
allocation causes the CBR Allocated Bw to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.14 |
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiRevThe upper threshold for the CBR connection count Rev trap. When an
allocation causes the CBR connection count to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.15 |
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoFwdThe lower threshold for the CBR Allocated Bw Fwd trap. When an
allocation causes the CBR Allocated Bw to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.16 |
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoRevThe lower threshold for the CBR Allocated Bw Rev trap. When an
allocation causes the CBR Allocated Bw to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.17 |
sfcsBwPortPoolTrapMgmtABRConnCntTholdHiFwdThe upper threshold for the ABR connection count Fwd trap. When an
allocation causes the ABR connection count to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.18 |
sfcsBwPortPoolTrapMgmtABRConnCntTholdHiRevThe upper threshold for the ABR connection count Rev trap. When an
allocation causes the ABR connection count to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.19 |
sfcsBwPortPoolTrapMgmtABRConnCntTholdLoFwdThe lower threshold for the ABR connection count Fwd trap. When an
allocation causes the ABR connection count to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.20 |
sfcsBwPortPoolTrapMgmtABRConnCntTholdLoRevThe lower threshold for the ABR connection count Rev trap. When an
allocation causes the ABR connection count to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.21 |
sfcsBwPortPoolTrapMgmtABRAllocBwTholdHiFwdThe upper threshold for the ABR Allocated Bw Fwd trap. When an
allocation causes the ABR Allocated Bw to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.22 |
sfcsBwPortPoolTrapMgmtABRAllocBwTholdHiRevThe upper threshold for the ABR Allocated Bw Rev trap. When an
allocation causes the ABR Allocated Bw to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.23 |
sfcsBwPortPoolTrapMgmtABRAllocBwTholdLoFwdThe lower threshold for the ABR Allocated Bw Fwd trap. When an
allocation causes the ABR Allocated Bw to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.24 |
sfcsBwPortPoolTrapMgmtABRAllocBwTholdLoRevThe lower threshold for the ABR Allocated Bw Rev trap. When an
allocation causes the ABR Allocated Bw to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.25 |
sfcsBwPortPoolTrapMgmtVBRConnCntTholdHiFwdThe upper threshold for the VBR connection count Fwd trap. When an
allocation causes the VBR connection count to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.26 |
sfcsBwPortPoolTrapMgmtVBRConnCntTholdHiRevThe upper threshold for the VBR connection count Rev trap. When an
allocation causes the VBR connection count to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.27 |
sfcsBwPortPoolTrapMgmtVBRConnCntTholdLoFwdThe lower threshold for the VBR connection count Fwd trap. When an
allocation causes the VBR connection count to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.28 |
sfcsBwPortPoolTrapMgmtVBRConnCntTholdLoRevThe lower threshold for the VBR connection count Rev trap. When an
allocation causes the VBR connection count to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.29 |
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiFwdThe upper threshold for the VBR Allocated Bw Fwd trap. When an
allocation causes the VBR Allocated Bw to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.30 |
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiRevThe upper threshold for the VBR Allocated Bw Rev trap. When an
allocation causes the VBR Allocated Bw to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.31 |
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoFwdThe lower threshold for the VBR Allocated Bw Fwd trap. When an
allocation causes the VBR Allocated Bw to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.32 |
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoRevThe lower threshold for the VBR Allocated Bw Rev trap. When an
allocation causes the VBR Allocated Bw to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.33 |
sfcsBwPortPoolTrapMgmtUBRConnCntTholdHiFwdThe upper threshold for the UBR connection count Fwd trap. When an
allocation causes the UBR connection count to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.34 |
sfcsBwPortPoolTrapMgmtUBRConnCntTholdHiRevThe upper threshold for the UBR connection count Rev trap. When an
allocation causes the UBR connection count to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.35 |
sfcsBwPortPoolTrapMgmtUBRConnCntTholdLoFwdThe lower threshold for the UBR connection count Fwd trap. When an
allocation causes the UBR connection count to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.36 |
sfcsBwPortPoolTrapMgmtUBRConnCntTholdLoRevThe lower threshold for the UBR connection count Rev trap. When an
allocation causes the UBR connection count to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.37 |
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiFwdThe upper threshold for the UBR Allocated Bw Fwd trap. When an
allocation causes the UBR Allocated Bw to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.38 |
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiRevThe upper threshold for the UBR Allocated Bw Rev trap. When an
allocation causes the UBR Allocated Bw to exceed this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.39 |
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoFwdThe lower threshold for the UBR Allocated Bw Fwd trap. When an
allocation causes the UBR Allocated Bw to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.40 |
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoRevThe lower threshold for the UBR Allocated Bw Rev trap. When an
allocation causes the UBR Allocated Bw to fall below this value,
the trap is generated. (If it has never been set, the value will be -1.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.41 |
sfcsBWPortPoolTrapMgmtBuffUpTholdThe upper threshold for buffer allocation trap .rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.42 |
sfcsBWPortPoolTrapMgmtBuffLoTholdThe lower threshold for buffer allocation trap .rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.43 |
sfcsBWPortPoolTrapMgmtConnRejTholdThe lower threshold for conn rejects trap .rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.44 |
sfcsBuffPools OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4 |
sfcsBuffPrioTableThis table contains the rows of all the buffer pools. SEQUENCE OF SfcsBuffPrioEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1 |
sfcsBuffPrioEntryEach entry contains the rows of all the buffer pools. SfcsBuffPrioEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1 |
sfcsBuffPrioPortIndexThis index specifies which port we are dealing
with. This reference is in the same format as MIB II's
Interface index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.1 |
sfcsBuffPrioPriorityThis index specifies which priority we are dealing
with.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.2 |
sfcsBuffPrioAssignCtlThe status of how assignment is controlled. Static,Manual,Adaptive.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.3 |
sfcsBuffPrioMinCtlThe minimum number of cells which can be assigned to this
port/prioity.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.4 |
sfcsBuffPrioAssignedThe number of cells which are currently assigned to this
port/priority.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.5 |
sfcsBuffPrioAllocatedThe number of assigned cells which are currently allocated to
VCs for this port/priority.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.6 |
sfcsBuffPrioAvailableThe number of assigned cells which are free to be allocated.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.7 |
sfcsBuffPrioPeakAllocThe peak number of cells which have been allocated to this
port/priority.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.8 |
sfcsBuffPrioConnRejsThe number of connections rejected because of a lack of buffers.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.9 |
sfcsBuffPrioUpTholdTrapThe upper threshold of allocations to trigger an upper thold trap.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.10 |
sfcsBuffPrioLoTholdTrapThe lower threshold of allocations to trigger a lower thold trap.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.11 |
sfcsBuffPrioConnRejTholdThe lower threshold of conn rejects trap because of inadequate buffers.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.12 |
sfcsProxy OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.13 |
sfcsProxyConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1 |
sfcsProxyConfigTableThis table contains the config info and a port
reading function. SEQUENCE OF SfcsProxyConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1 |
sfcsProxyConfigEntryEach entry contains ANIM Proxy config info or a function. SfcsProxyConfigEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1 |
sfcsProxyConfigANIMIndexThis index specifies which ANIM Proxy we are dealing
with. This reference is in the same format as MIB II's
Interface index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.1 |
sfcsProxyConfigNUMPORTSIndicates the number of ports per Proxy which is always 4.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.2 |
sfcsProxyConfigTxMemSizeIndicates the size of the port's Transmission memory in K.
The memory size is always 1K.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.3 |
sfcsProxyConfigRxMaxPduSizeIndicates the size of the port's Transmission memory in K.
The memory size is always 1K.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.4 |
sfcsProxyConfigBandWidthIndicates the bandwidth for the port, which is ?????ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.5 |
sfcsProxyConfigTransmitDoneChecks if the Transmission has finished.ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.6 |
sfcsProxyConfigReceiveFifoStateChecks if the port's receive Fifo is full or not.ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.7 |
sfcsProxyConfigPortTransmitModeControls Transmission of cells in port Transmit memory.rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.8 |
sfcsProxyConfigReceiveFifoResetControls the receive buffer's memory. Reset clears memory.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.9 |
sfcsProxyConfigTxFifoResetControls the port's transmit memory. Reset clears memory.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.10 |
sfcsProxyConfigReceiveModeControls whether or not the port receives cells.rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.11 |
sfcsProxyConfigCaptureModeControls how much of the cell is received.rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.12 |
sfcsProxyConfigInitPortSetting this returns the port to the initial setup.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.13 |
sfcsProxyConfigLoadTransmit load for port.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.14 |
sfcsProxyConfigGumboUnreadable octet string used for control information.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.15 |
sfcsProxyTrans OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2 |
sfcsProxyTransTableThis table contains the arguments and the function for the
Transmit function. SEQUENCE OF SfcsProxyTransEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1 |
sfcsProxyTransEntryThe entries are the arguments for the Transmit function. SfcsProxyTransEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1 |
sfcsProxyTransANIMIndexThis index specifies which ANIM Port we are dealing
with. This reference is in the same format as MIB II's
Interface Index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.1 |
sfcsProxyTransEncodeNewPduSetting this encodes a new PDU based on the current PDU parameters
into the port's transmit memory.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.2 |
sfcsProxyTransVPIThis is the VPI for the PDU.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.3 |
sfcsProxyTransVCIThis is the VCI for the PDU.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.4 |
sfcsProxyTransPTIPayload Type Indicator: the value of the 3 bit Payload Type
field in the header. The most signifigant bit indicates user or
control data, the next bit indicates congestion, and the
last bit indicates AAL encoding.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.5 |
sfcsProxyTransCLPThe cell loss priority: 1 or 0.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.6 |
sfcsProxyTransPayloadTypeThe payload type for the cell.rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.7 |
sfcsProxyTransPayloadLengthThe length of the payload in bytes.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.8 |
sfcsProxyTransPayloadDataIf the payload type is user input, this is the payload itself.rw OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.9 |
sfcsProxyTransCountNumber of copies of the pdu to encode in port transmit memory.rw INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.10 |
sfcsProxyTransPayloadAdaptionLayerThe format of the payload: either raw cells or AAL5.rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.11 |
sfcsProxyTransMpxMethodThe format of the payload: either raw cells or AAL5.rw INTEGER --{ -- enumerate me!! -- } .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.12 |
sfcsProxyTransControlControls how many times to send what's in the port's
transmit memory.rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.13 |
sfcsProxyTransGumboReturns the vpi, vci, pti, clp, payload_type, payload_length, count,
PAL, mpx method, and control entires for this table in a string where
the entries are separated by semicolons.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.14 |
sfcsProxyRead OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3 |
sfcsProxyReadTableThis table contains information read from the cells in the receive fifo. SEQUENCE OF SfcsProxyReadEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1 |
sfcsProxyReadEntryThe entries are the information about the cells or the PDU. SfcsProxyReadEntry .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1 |
sfcsProxyReadANIMIndexThis index specifies which ANIM Port we are dealing
with. This reference is in the same format as the MIB II
Interface Index.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.1 |
sfcsProxyReadModeHow the receive fifo is read.rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.2 |
sfcsProxyReadNewPduPops a new Pdu from the receive fifo to be examined and read.rw Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.3 |
sfcsProxyReadGumboUnreadable control information.rw OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.4 |
sfcsProxyReadVPIThis is the VPI for the PDU.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.5 |
sfcsProxyReadVCIThis is the VCI for the PDU.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.6 |
sfcsProxyReadPTIPayload Type Indicator: the value of the 3 bit Payload Type
field in the header. The most signifigant bit indicates user or
control data, the next bit indicates congestion, and the
last bit indicates AAL encoding.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.7 |
sfcsProxyReadCLPThe cell loss priority: 1 or 0.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.8 |
sfcsProxyReadDataLengthThe length of the PDU in bytes.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.9 |
sfcsProxyReadDataThe actual data of the PDU.ro OCTET STRING .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.10 |
sfcsProxyReadPalThe format of the payload: either raw cells or AAL5.ro Enumeration .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.11 |
sfcsProxyReadInbyteslostsThe number of bytes that were dropped while reading. Usually because
they occurred before the Start of Cell was discovered.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.12 |
sfcsProxyReadInCellsThe number of cells read since this port was last reset.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.13 |
sfcsProxyReadInErrorThe number of pdu's that had to be dropped due to errors.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.14 |
sfcsProxyReadInCellReadErrorThe number of cells that had to be dropped due to errors.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.15 |
sfcsProxyReadInHecErrorThe number of cell headers that contained errors.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.16 |
sfcsProxyReadInTooBigErrorThe number of pdu's that were too large to be received.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.17 |
sfcsProxyReadInCRCErrorThe number of pdu's that failed the CRC check.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.18 |
sfcsProxyReadInLengthMismatchErrorThe length stored in the pdu did not match the actual
length of the pdu read in.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.19 |
sfcsProxyReadInTotalCellsTotal number of cells read in by the snapshot.ro INTEGER .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.20 |
sfcsSysConfigAdminResetResets this virtual switch. Writing a value of
reset(2) will force a restart of the entire switch,
without any graceful shutdown. Any active
connections or services will be interrupted.
other(1)
reset(2)
::= { sfcsSysSystemCfgEnt 1 }
sfcsSysConfigATOMPersistance OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTIONrw Enumeration .sfcsConfigEntry.2 |
sfcsConfigAdminResetResets this SFCS module. Writing a value of
reset(2) will force a soft restart of the SFCS
without any graceful shutdown. Any active
connections or services will be interrupted.
other(1)
reset(2)
::= { sfcsConfigEntry 3 }
sfcsConfigOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
other(3),
pending-disable(4),
pending-enable(5),
invalid-config(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTIONrw Enumeration .sfcsConfigEntry.4 |
sfcsConfigOperTimeIndicates the amount of time (# of time ticks) that this
SFCS module has been in its current operational state.ro TimeTicks (SNMPv2-SMI) .sfcsConfigEntry.5 |
sfcsConfigLastChangeIndicates the last time a change was made to the
configuration entry for this SFCS switch module.ro TimeTicks (SNMPv2-SMI) .sfcsConfigEntry.6 |
sfcsConfigVersionIndicates the current revision level of the SFCS MIB
for this switch module expressed as an integer.ro INTEGER .sfcsConfigEntry.7 |
sfcsConfigMibRevIndicates in textual format the current revision level
of the Cabletron SFCS MIB for this switch module.ro DisplayString (SNMPv2-TC) .sfcsConfigEntry.8 |
sfcsConfigSwitchHostPortIndicates the switch port that is attached to the host.ro INTEGER .sfcsConfigEntry.9 |
sfcsConfigHostCtrlATMAddrIndicates the ATM address of the host. (SAR)ro OCTET STRING .sfcsConfigEntry.10 |
sfcsConfigSwitchCapacityIndicates the front panel bandwidth based on the hardware
that is currently installed, in Mbps.
(number of ports and the port type)ro INTEGER .sfcsConfigEntry.11 |
sfcsConfigMaxCnxEntriesIndicates the maximum number of connections which
can be established on this switch module.ro INTEGER .sfcsConfigEntry.12 |
sfcsConfigMaxStatEntriesIndicates the maximum number of stats enabled VCs for this
switch module.ro INTEGER .sfcsConfigEntry.13 |
sfcsConfigMaxUpcEntriesIndicates the maximum number of UPC enabled VCs for this
switch module.ro INTEGER .sfcsConfigEntry.14 |
sfcsConfigNumberANIMSIndicates the number of ATM Network Inteface Modules
currently configured on this switch module.ro INTEGER .sfcsConfigEntry.15 |
sfcsConfigBwCapabilityIndicates the total bandwidth capability for this
switch engine expressed in Mbps.ro INTEGER .sfcsConfigEntry.16 |
sfcsConfigMasterClock1SourceIndicates the clocking source for MasterClock1 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does not support
backplane clocking.rw Enumeration .sfcsConfigEntry.17 |
sfcsConfigMasterClock2SourceIndicates the clocking source for MasterClock2 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does not support
backplane clocking.rw Enumeration .sfcsConfigEntry.18 |
sfcsConfigMasterClock1StandbyIndicates the clocking stand-by for MasterClock1 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does not support
backplane clocking. If this value is none(7) and an interrupt on
the primary interface for MasterClock1 is received. MasterClock1
will switch to that anims local clock.rw Enumeration .sfcsConfigEntry.19 |
sfcsConfigMasterClock2StandbyIndicates the clocking stand-by for MasterClock2 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does not support
backplane clocking. If this value is none(7) and an interrupt on
the primary interface for MasterClock1 is received. MasterClock1
will switch to that anims local clock.rw Enumeration .sfcsConfigEntry.20 |