CISCOSB-STORMCTRL-MIB
The CISCOSB-STORMCTRL-MIB enables monitoring and configuration of broadcast, multicast, and unicast storm control thresholds on Cisco Catalyst switches. It provides visibility into traffic suppression counters and interface-level storm control status to prevent network degradation caused by excessive Layer 2 flooding.
Imported Objects
Objects
35 total| Object Name |
|---|
rlStormCtrlThis private MIB module defines storm control private MIBs. MODULE-IDENTITY .1.3.6.1.4.1.9.6.1.101.77 |
rlStormCtrlSupportIdentify if the strom control protection is supportedro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.1 |
rlStormCtrlMibVersionMIB's version, the current version is 3.ro INTEGER .1.3.6.1.4.1.9.6.1.101.77.2 |
rlStormCtrlRateUnitTypeSupportthe supported rate unit type for the storm rate controlro Bits .1.3.6.1.4.1.9.6.1.101.77.3 |
rlStormCtrlTypeSupportthe supported frame type for the storm control protectionro Bits .1.3.6.1.4.1.9.6.1.101.77.4 |
rlStormCtrlRateSupportPerTypeidentify if rate control is supported for each frame typero Bits .1.3.6.1.4.1.9.6.1.101.77.5 |
rlStormCtrlEnbaleDependencyBetweenTypesindicate enable limitation of dependency between frame types, such as enabling of multicast should be with the enabling of broadcast type (bcm 5632)ro Bits .1.3.6.1.4.1.9.6.1.101.77.6 |
rlStormCtrlRateDependencyBetweenTypesindicate limitation of dependency between frame types for rate assignment, for example: assigning of rate limit for unicast frame must assigning the same rate for multicast and bradcast frame (bcm 5615), in case the device support enbale per each frame type but with the same rate limitation.ro Bits .1.3.6.1.4.1.9.6.1.101.77.7 |
rlStormCtrlTableThe table contains the storm control protection per port SEQUENCE OF RlStormCtrlEntry .1.3.6.1.4.1.9.6.1.101.77.8 |
rlStormCtrlEntrystorm control protection, defined per port,frame type and rate RlStormCtrlEntry .1.3.6.1.4.1.9.6.1.101.77.8.1 |
rlStormCtrlRateTypeindicate the rate unit typerw RlStormCtrlRateUnit .1.3.6.1.4.1.9.6.1.101.77.8.1.1 |
rlStormCtrlUnknownUnicastEnableenable or disable the storm control for unknown unicast framesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.2 |
rlStormCtrlUnknownUnicastRateset the storm control rate limit for the unknown unicast frames, 0 indicate blocking of frames from this type.rw Unsigned32 .1.3.6.1.4.1.9.6.1.101.77.8.1.3 |
rlStormCtrlUnknownMulticastEnableenable or disable the storm control for unknown multicast framesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.4 |
rlStormCtrlUnknownMulticastRateset the storm control rate limit for the unknown multicast frames, 0 indicate blocking of frames from this type.rw Unsigned32 .1.3.6.1.4.1.9.6.1.101.77.8.1.5 |
rlStormCtrlBroadcastEnableenable or disable the storm control for Broadcast framesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.6 |
rlStormCtrlBroadcastRateset the storm control rate limit for the Broadcast frames, 0 indicate blocking of frames from this type.rw Unsigned32 .1.3.6.1.4.1.9.6.1.101.77.8.1.7 |
rlStormCtrlMulticastEnableenable or disable the storm control for multicast framesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.8 |
rlStormCtrlMulticastRateset the storm control rate limit for the multicast frames, 0 indicate blocking of frames from this type.rw Unsigned32 .1.3.6.1.4.1.9.6.1.101.77.8.1.9 |
rlStormCtrlSetDefaultRateTypeindicate if return the rate unit type to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.10 |
rlStormCtrlSetDefaultUnknownUnicastEnableindicate if return the storm control enable for unknown unicast frames to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.11 |
rlStormCtrlSetDefaultUnknownUnicastRateindicate if return the storm control rate limit for the unknown unicast frames to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.12 |
rlStormCtrlSetDefaultUnknownMulticastEnableindicate if return the storm control enable for unknown multicast frames to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.13 |
rlStormCtrlSetDefaultUnknownMulticastRateindicate if return the storm control rate limit for the unknown multicast frames to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.14 |
rlStormCtrlSetDefaultBroadcastEnableindicate if return the storm control enable for Broadcast frames to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.15 |
rlStormCtrlSetDefaultBroadcastRateindicate if return the storm control rate limit for the Broadcast frames to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.16 |
rlStormCtrlSetDefaultMulticastEnableindicate if return the storm control for multicast frames to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.17 |
rlStormCtrlSetDefaultMulticastRateindicate if return the storm control rate limit for the multicast frames to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.77.8.1.18 |
rlStormCtrlBroadcastOperRateOperative storm control rate limit for the Broadcast frames. The value will be 0 if rlStormCtrlRateType is not from type precentages.ro Unsigned32 .1.3.6.1.4.1.9.6.1.101.77.8.1.19 |
rlStormCtrlGroupTableThe table contains per port for each supported frame type to which group it belongs. SEQUENCE OF RlStormCtrlGroupEntry .1.3.6.1.4.1.9.6.1.101.77.9 |
rlStormCtrlGroupEntrygroup id for each supported frame type defined per port. RlStormCtrlGroupEntry .1.3.6.1.4.1.9.6.1.101.77.9.1 |
rlStormCtrlGroupUnknownUnicastIdIndicates the id of the group for unknown unicast frame type that the port belongs to, 0 indicates that unknown unicast frame type is not supported.ro INTEGER .1.3.6.1.4.1.9.6.1.101.77.9.1.1 |
rlStormCtrlGroupUnknownMulticastIdIndicates the id of the group for unknown multicast frame type that the port belongs to, 0 indicates that unknown multicast frame type is not supported.ro INTEGER .1.3.6.1.4.1.9.6.1.101.77.9.1.2 |
rlStormCtrlGroupBroadcastIdIndicates the id of the group for broadcast frame type that the port belongs to, 0 indicates that broadcast frame type is not supported.ro INTEGER .1.3.6.1.4.1.9.6.1.101.77.9.1.3 |
rlStormCtrlGroupMulticastIdIndicates the id of the group for multicast frame type that the port belongs to, 0 indicates that multicast frame type is not supported.ro INTEGER .1.3.6.1.4.1.9.6.1.101.77.9.1.4 |
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-ENTITY-VENDORTYPE-OID-MIB maps Cisco-specific hardware component identifiers to the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of physical device types such as line cards, power supplies, and fans within Cisco infrastructure. This mapping ensures that SNMP management systems can accurately correlate physical inventory entries with vendor-specific component definitions for accurate device discovery and monitoring.
The CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB provides SNMP-based monitoring and management of Cisco Unified Computing System (UCS) hardware components, including chassis, blades, fabric interconnects, and power supplies. It exposes critical operational metrics such as device status, port states, temperature readings, fan speeds, and power consumption data for infrastructure health assessment.
The CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB enables SNMP-based monitoring and management of physical and virtual network adapter interfaces, including link status, traffic counters, error statistics, and port configuration parameters, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers.
The CISCO-UNIFIED-COMPUTING-TC-MIB module defines standard textual conventions and data type definitions required for monitoring Cisco Unified Computing System (UCS) hardware components, including server blades, fabric interconnects, and chassis resources. These definitions enable consistent interpretation of specific UCS metrics such as power supply status, fan speeds, thermal readings, and port utilization across SNMP management applications.
The CISCO-UNIFIED-COMPUTING-FABRIC-MIB enables SNMP-based monitoring and management of the Cisco UCS Fabric Interconnects and associated fabric switching infrastructure, exposing metrics for port states, link utilization, error counters, and fabric topology status. It facilitates granular visibility into the physical and logical fabric layers, including uplink/downlink interfaces, VLAN configurations, and fabric failover conditions within the unified computing environment.
The STARENT-MIB module provides SNMP management and monitoring capabilities for Cisco ASR 5000 and ASR 5500 multimedia core platforms, specifically exposing metrics related to 2G/3G/4G and WiFi subscriber sessions, inline service states, and carrier-class high-availability status.