Home/Catalog/CISCOSB-POLICY-MIB

CISCOSB-POLICY-MIB

AI MIB Summary

The CISCOSB-POLICY-MIB module enables the monitoring and management of generic traffic policy configurations and state metrics on Cisco SB (Service Block) devices via SNMP. It provides access to policy rule definitions, match criteria, and action parameters to facilitate granular control over packet filtering and forwarding behaviors within the device's data plane.

The private MIB module definition generic traffic policy in CISCOSB devices.
Main OID:
rlPolicy.1.3.6.1.4.1.9.6.1.101.59
355
Objects
Active
Status
7
Dependencies

Imported Objects

Objects

355 total
Object Name
rlPolicy
MODULE-IDENTITY
.1.3.6.1.4.1.9.6.1.101.59
IMPORTS
Enumeration
.1.3.6.1.4.1.9.6.1.101.59
rlPolicyMibVersionro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.1
rlPolicyClassifier
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.59.2
rlPolicyClassifierPlatDependParams
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.59.2.1
rlPolicyFlowClassificationOffsetsGroupSchemero
Enumeration
.1.3.6.1.4.1.9.6.1.101.59.2.1.1
rlPolicyNumberOfOffsetsPerFlowClassificationOffsetGrouproobsolete
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.1.2
rlPolicyFlowClassificationOffsetGroupMaximumOffsetro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.1.3
rlPolicyNumberOfOffsetsPerOmpcGroupro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.1.4
rlPolicyOmpcMaximumOffsetro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.1.5
rlPolicyOMPCPermittedOperatorsro
OCTET STRING
.1.3.6.1.4.1.9.6.1.101.59.2.1.6
rlPolicyMaxOMPCLengthForBiggerSmallerOperationro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.1.7
rlPolicyClassifierAdditionalCriteriaSupportedroobsolete
OCTET STRING
.1.3.6.1.4.1.9.6.1.101.59.2.1.8
rlPolicyClassifierAdditionalCriteriaUsedInOffsetCountroobsolete
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.2.1.9
rlPolicyClassifierPermittedOffsetTypesroobsolete
OCTET STRING
.1.3.6.1.4.1.9.6.1.101.59.2.1.10
rlPolicyClassifierOMPCActionsro
OCTET STRING
.1.3.6.1.4.1.9.6.1.101.59.2.1.11
rlPolicyFlowClassificationOffsetsTable
SEQUENCE OF RlPolicyFlowClassificationOffsetsGroupEntry
.1.3.6.1.4.1.9.6.1.101.59.2.2
rlPolicyFlowClassificationOffsetsGroupEntry
RlPolicyFlowClassificationOffsetsGroupEntry
.1.3.6.1.4.1.9.6.1.101.59.2.2.1
rlPolicyFlowClassificationOffsetsGroupTypero
RlPolicyGroupType
.1.3.6.1.4.1.9.6.1.101.59.2.2.1.1
rlPolicyFlowClassificationOffsetsGroupOffsetrw
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.59.2.2.1.2
rlPolicyFlowClassificationOffsetsGroupOffsetTyperw
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.59.2.2.1.3
rlPolicyFlowClassificationOffsetsGroupMaskrw
OCTET STRING
.1.3.6.1.4.1.9.6.1.101.59.2.2.1.4
rlPolicyFlowClassificationOffsetsGroupUseInputInterfacerw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.2.2.1.5
rlPolicyFlowClassificationOffsetsGroupUseOutputInterfacerw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.2.2.1.6
rlPolicyFlowClassificationOffsetsGroupUseVlanIdrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.2.2.1.7
rlPolicyFlowClassificationOffsetsGroupStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.2.2.1.8
rlPolicyFlowClassificationOffsetsGroupUseVPTIdrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.2.2.1.9
rlPolicyFlowClassificationOffsetsGroupUseEtherTypeIdrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.2.2.1.10
rlPolicyFlowClassificationOffsetsGroupUseInnerVlanIdrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.2.2.1.11
rlPolicyOMPCTable
SEQUENCE OF RlPolicyOMPCEntry
.1.3.6.1.4.1.9.6.1.101.59.2.3
rlPolicyOMPCEntry
RlPolicyOMPCEntry
.1.3.6.1.4.1.9.6.1.101.59.2.3.1
rlPolicyOMPCGroupTypero
RlPolicyGroupType
.1.3.6.1.4.1.9.6.1.101.59.2.3.1.1
rlPolicyOMPCIndexro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.3.1.2
rlPolicyOMPCOffsetrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.3.1.3
rlPolicyOMPCOffsetTyperw
Enumeration
.1.3.6.1.4.1.9.6.1.101.59.2.3.1.4
rlPolicyOMPCMaskrw
OCTET STRING
.1.3.6.1.4.1.9.6.1.101.59.2.3.1.5
rlPolicyOMPCPatternrw
OCTET STRING
.1.3.6.1.4.1.9.6.1.101.59.2.3.1.6
rlPolicyOMPCConditionrw
Enumeration
.1.3.6.1.4.1.9.6.1.101.59.2.3.1.7
rlPolicyOMPCDescriptionrw
DisplayString
.1.3.6.1.4.1.9.6.1.101.59.2.3.1.8
rlPolicyOMPCStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.2.3.1.9
rlPolicyClassifierTable
SEQUENCE OF RlPolicyClassifierEntry
.1.3.6.1.4.1.9.6.1.101.59.2.4
rlPolicyClassifierEntry
RlPolicyClassifierEntry
.1.3.6.1.4.1.9.6.1.101.59.2.4.1
rlPolicyClassifierTypero
RlPolicyGroupType
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.1
rlPolicyClassifierListIndexro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.2
rlPolicyClassifierSubListIndexro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.3
rlPolicyClassifierIndexro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.4
rlPolicyClassifierOmpcListrw
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.5
rlPolicyClassifierInIfIndexrw
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.6
rlPolicyClassifierOutIfIndexrw
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.7
rlPolicyClassifierVIDrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.8
rlPolicyClassifierDiffservInIfTyperw
RlPolicyClassifierDiffservIfType
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.9
rlPolicyClassifierDiffservOutIfTyperw
RlPolicyClassifierDiffservIfType
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.10
rlPolicyClassifierStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.11
rlPolicyClassifierInIfIndexListrw
PortList (Q-BRIDGE-MIB)
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.12
rlPolicyClassifierOutIfIndexListrw
PortList (Q-BRIDGE-MIB)
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.13
rlPolicyClassifierVPTIDrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.14
rlPolicyClassifierVPTIDMaskrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.15
rlPolicyClassifierEtherTypeIDrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.16
rlPolicyClassifierInnerVIDrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.2.4.1.17
rlPolicyRules
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.59.3
rlPolicyRulesPlatDependParams
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.59.3.1
rlPolicyDroppedPacketCountSupportedro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.3.1.1
rlPolicyFilterActionOptionsro
OCTET STRING
.1.3.6.1.4.1.9.6.1.101.59.3.1.2
rlPolicyIngressMeteringSupportedro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.3.1.3
rlPolicyEgressMeteringSupportedro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.3.1.4
rlPolicyRulesTable
SEQUENCE OF RlPolicyRulesEntry
.1.3.6.1.4.1.9.6.1.101.59.3.2
rlPolicyRulesEntry
RlPolicyRulesEntry
.1.3.6.1.4.1.9.6.1.101.59.3.2.1
rlPolicyRulesTableTypero
RlPolicyGroupType
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.1
rlPolicyRulesInterfaceDirectionro
Enumeration
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.2
rlPolicyRulesListIndexro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.3
rlPolicyRulesSubListIndexro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.4
rlPolicyRulesIndexro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.5
rlPolicyRulesFilteringActionrw
Enumeration
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.6
rlPolicyRulesDroppedPacketsro
Counter32
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.7
rlPolicyRulesFurtherRefPointerrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.8
rlPolicyRulesDescriptionrw
DisplayString
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.9
rlPolicyRulesStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.10
rlPolicyRulesCounterIdxrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.11
rlPolicyRulesCounterro
Counter32
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.12
rlPolicyRulesActionPointerrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.13
rlPolicyRulesTimeRange1rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.14
rlPolicyRulesTimeRange2rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.15
rlPolicyRulesSrcPortRangeStartrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.16
rlPolicyRulesSrcPortRangeEndrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.17
rlPolicyRulesDestPortRangeStartrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.18
rlPolicyRulesDestPortRangeEndrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.19
rlPolicyRulesActionDropTyperw
RlPolicyRulesActionDropType
.1.3.6.1.4.1.9.6.1.101.59.3.2.1.20
rlPolicyRulesDownloadMarkerrw
Enumeration
.1.3.6.1.4.1.9.6.1.101.59.3.3
rlPolicyMeterClass
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.59.4
rlPolicyMeterPlatDependParams
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.59.4.1
rlPolicyMeterDepthro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.4.1.1
rlPolicyMeterClassTable
SEQUENCE OF RlPolicyMeteringClassEntry
.1.3.6.1.4.1.9.6.1.101.59.4.2
rlPolicyMeteringClassEntry
RlPolicyMeteringClassEntry
.1.3.6.1.4.1.9.6.1.101.59.4.2.1
rlPolicyMeteringClassIndexro
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.4.2.1.1
rlPolicyMeteringClassAlwaysConformrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.59.4.2.1.2
rlPolicyMeteringClassAggregateMeterRaterw
INTEGER UNITS "kbps"
.1.3.6.1.4.1.9.6.1.101.59.4.2.1.3
rlPolicyMeteringClassAggregateMeterBurstSizerw
INTEGER UNITS "bytes"
.1.3.6.1.4.1.9.6.1.101.59.4.2.1.4
rlPolicyMeteringClassPerSessionMeteringRaterw
INTEGER UNITS "kbps"
.1.3.6.1.4.1.9.6.1.101.59.4.2.1.5
rlPolicyMeteringClassMaxSessionLimitrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.4.2.1.6
rlPolicyMeteringClassActionPointerrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.59.4.2.1.7
Showing 100 of 355 OID objects

CISCOSB-POLICY-MIB Technical Reference Overview

The CISCOSB-POLICY-MIB SNMP MIB module published by Cisco defines 355 managed OID objects, including 288 scalar/column metrics, 25 SNMP tables, and 0 trap/notification events anchored at base OID .1.3.6.1.4.1.9.6.1.101.59. Key tabular structures include rlPolicyFlowClassificationOffsetsTable, rlPolicyOMPCTable, rlPolicyClassifierTable, rlPolicyRulesTable, rlPolicyMeterClassTable, rlPolicyActionTable.

Key OID Definitions in CISCOSB-POLICY-MIB

rlPolicyMODULE-IDENTITYnot-accessible
.1.3.6.1.4.1.9.6.1.101.59

The private MIB module definition generic traffic policy in CISCOSB devices.

rlPolicyFlowClassificationOffsetsTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.2.2

Specifies the byte offsets that the platform can use for policy decisions. This table is used for platforms which impose limitations on choosing the OMPCs for classification. If the platform does not impose any limitations, the value of rlPolicyFlowClassificationOffsetsGroupScheme is allOffsetsPermitted. Each entry in the table specifies a combination of byte offsets which can be used to specify flow classification. A rule may use a subset of the bytes of its Offset Group. The maximum value for each offset is given by rlPolicyFlowClassificationOffsetGroupMaximumOffset. The maximum number of offsets per Offset Group is given by rlPolicyNumberOfOffsetsPerFlowClassificationOffsetGroup.

rlPolicyOMPCTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.2.3

The table of OMPC statements.

rlPolicyClassifierTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.2.4

The table of Classifier statement.

rlPolicyRulesTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.3.2

The table of rules and Rules statements applied to all incoming traffic at the post-routing phase - ie. both the inPort and outPort are available for classification When Diffserv is not in effect(ie. IPX, bridging, or IP when the global option for Diffserv is off), certain table parameters are not available(see below). The DiffServ option is enabled or disabled by setting rlDiffservModeEnabled.

rlPolicyMeterClassTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.4.2

This table defines the Metering classes for the system.

rlPolicyActionTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.5.2

This table defines the Actions for packets that pass the meter table ie. the characteristics that are assigned to packets before they reach the scheduler. When Diffserv is not in effect(ie. IPX, bridging, or IP when the global option for Diffserv is off), certain table parameters are not available(see below). The DiffServ option is enabled or disabled by setting rlDiffservModeEnabled.

rlPolicyServiceClassTentativeTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.6.4

This table defines the service classes for the system ie. the queue discipline and weight characteristics that are implemented on each port unless the user configures a port specific value in .... The total number of service classes defined can not exceed rlPolicyNumberOfTransmitQueuesPerPort.

rlPolicyServiceClassActiveTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.6.5

This table defines the service classes for the system ie. the queue discipline and weight characteristics that are implemented on each port unless the user configures a port specific value in .... The total number of service classes defined can not exceed rlPolicyNumberOfTransmitQueuesPerPort.

rlPolicyPortConfigurationTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.6.6

This table enables the network administrator to fine-tune the bandwidth given to each service class on each port. The values in this table will thus override those of the rlServiceClassTable (THIS TABLE IS MANAGE FROM 3SW).

rlPolicyDropProfileTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.6.7

this table defines drop profile which describ the queue's drop algorithems

rlPolicyVlanConfigurationTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.6.8

This table enables the network administrator to fine-tune the rate limit given to each vlan. The values in this table will thus override those of the rlQosIfPolicyTable (THIS TABLE IS MANAGED FROM 3SW).

rlDiffservBoundaryTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.7.3

Indicates whether a port is considered a boundary or an interior node of the Diffserv domain

rlPolicyDscpServiceClassTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.10.1

This table specifies The DSCP to ServiceClass map table

rlPolicyTcpUdpPortServiceClassTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.10.2

This table specifies TCP/UDP Port to ServiceClass map table

rlPolicyDscpRemarkTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.10.3

This table specifies The DSCP Remark table

rlPolicyDscpMutationTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.10.4

This table specifies The DSCP Mutation table

rlPolicyTrustModeTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.10.5

This table specifies the port state for the trusted basic mode

rlPolicyDscpVptTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.10.6

This table specifies The DSCP to VPT map table

rlPolicyDscpToDpTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.10.7

This table specifies The DSCP To Dp table

rlPolicyDefaultForwardingTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.11

This table specifies The default forwarding values : permit or deny for list of specific ports , vlans

rlPolicyPortPolicyStatisticsTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.12.1

This table specifies statistics counter for policies with specific actions

rlPolicyOutQueueStatisticsTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.12.2

Each entry in this table describes counter per any permutation of Port/VLAN/Queue/Drop Precedence . Each of the above can a group off 'All'. The index is port represent by rlPolicyOutQueueStatisticsCountrID. In each entry there are fields representing whether the counter is enabled and counters value.

rlPolicyGlobalStatisticsCntrsTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.59.12.3

This table specifies statistics global counters for specific rules for all ports that they are connected to

More MIBs from Cisco

Browse all CiscoMIBs →
CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

The CISCO-UNIFIED-COMPUTING-COMPUTE-MIB provides SNMP-based monitoring and management of Cisco UCS compute blades, servers, and chassis components, exposing critical metrics such as CPU utilization, memory usage, thermal sensor readings, power supply status, and interface operational states. This module enables granular visibility into the health and performance of the Cisco Unified Computing System's compute subsystems for capacity planning and fault isolation.

1401 objects→
CISCO-UNIFIED-COMPUTING-STORAGE-MIB

The CISCO-UNIFIED-COMPUTING-STORAGE-MIB facilitates SNMP-based monitoring and management of storage subsystems, including Fibre Channel and iSCSI interfaces, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers. It exposes critical operational metrics such as port status, error counters, throughput statistics, and storage controller health states to enable granular visibility into the storage infrastructure.

1295 objects→
CISCO-UNIFIED-COMPUTING-VNIC-MIB

The CISCO-UNIFIED-COMPUTING-VNIC-MIB enables SNMP-based monitoring and management of Virtual Network Interface Card (vNIC) attributes, including operational status, traffic counters, and binding configurations, within the Cisco Unified Computing System (UCS) fabric interconnects and server blades.

1161 objects→
CERENT-GENERIC-MIB

SNMP MIB module

984 objects→
CISCO-UNIFIED-COMPUTING-BIOS-MIB

The CISCO-UNIFIED-COMPUTING-BIOS-MIB enables SNMP-based monitoring and configuration of BIOS-level parameters, firmware versions, and hardware initialization states within Cisco Unified Computing System (UCS) servers. It provides visibility into critical server boot diagnostics, BIOS settings, and hardware readiness indicators to facilitate low-level infrastructure management and troubleshooting.

937 objects→
CISCO-UNIFIED-COMPUTING-ETHER-MIB

The CISCO-UNIFIED-COMPUTING-ETHER-MIB provides SNMP management interfaces for monitoring Ethernet interface statistics, link states, and error counters on Cisco Unified Computing System (UCS) fabric interconnects and blade server line cards. This module enables the tracking of physical layer connectivity, port throughput, and packet error rates within the UCS Ethernet switching infrastructure.

920 objects→