CISCO-WAN-CELL-EXT-MIB
AI MIB Summary
The CISCO-WAN-CELL-EXT-MIB enables SNMP-based monitoring and management of Cisco 4G/LTE cellular WAN interfaces by exposing critical radio frequency and QoS parameters, including RSRP, RSRQ, SINR, QCI, and AMBR. This module facilitates the tracking of Evolved Packet System (EPS) session states, eNodeB connectivity, and policy enforcement metrics for User Equipment (UE) within LTE networks.
This MIB module is an extension of CISCO-WAN-3G-MIB.my, and it provides network management support for Cisco cellular WAN 4G/LTE products.
*** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***
AMBR - Aggregate Maximum Bit Rate APN - Access Point Name ARP - Allocation and Retention Priority CQI - Channel Quality Indicator eNodeB - Evolved Node B EPS - Evolved Packet System E-UTRAN - Evolved Universal Terrestrial Radio Access GBR - Guaranteed Bit Rate LTE - Long Term Evolution MBR - Maximum Bit Rate PCRF - Policy and Charging Rules Function PDN - Packet Data Network QCI - QoS Class Identifier QOS - Quality of Service RF - Radio Frequency RSRP - Reference Signal Receive Power RSRQ - Reference Signal Receive Quality SINR - Signal-to-Interference plus Noise Ratio SNR - Signal-to-Noise Ratio UE - User Equipment
Main OID:
ciscoWanCellExtMIB.1.3.6.1.4.1.9.9.817
79
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
79 total| Object Name |
|---|
ciscoWanCellExtMIBThis MIB module is an extension of
CISCO-WAN-3G-MIB.my, and it provides
network management support for Cisco cellular
WAN 4G/LTE products.
*** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***
AMBR - Aggregate Maximum Bit Rate
APN - Access Point Name
ARP - Allocation and Retention Priority
CQI - Channel Quality Indicator
eNodeB - Evolved Node B
EPS - Evolved Packet System
E-UTRAN - Evolved Universal Terrestrial Radio Access
GBR - Guaranteed Bit Rate
LTE - Long Term Evolution
MBR - Maximum Bit Rate
PCRF - Policy and Charging Rules Function
PDN - Packet Data Network
QCI - QoS Class Identifier
QOS - Quality of Service
RF - Radio Frequency
RSRP - Reference Signal Receive Power
RSRQ - Reference Signal Receive Quality
SINR - Signal-to-Interference plus Noise Ratio
SNR - Signal-to-Noise Ratio
UE - User Equipment MODULE-IDENTITY .1.3.6.1.4.1.9.9.817 |
ciscoWanCellExtMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.817.0 |
cwceLteRsrqOnsetNotifIf RSRQ goes below cwceLteRsrqOnsetNotifThreshold
and the service bit in cwceLteRsrqOnsetNotifFlag
is set, this notification will be generated. Object
cwceLteRsrqOnsetNotifFlag will indicate which service
generates this notification and the associated RSRQ
will be reported in cwceLteNotifRsrq. Please note
that cwceLteNotifRsrq is used to indicate the
RSRQ value that triggers the notification, user
should go to the corresponding radio table to
get the current RSRQ value. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.817.0.1 |
cwceLteRsrqAbateNotifIf RSRQ goes above cwceLteRsrqAbateNotifThreshold
and the service bit in cwceLteRsrqOnsetNotifFlag
is set, this notification will be generated. Object
cwceLteRsrqAbateNotifFlag will indicate which service
generates this notification and the associated RSRQ
will be reported in cwceLteNotifRsrq. Please
note that cwceLteNotifRsrq is used to indicate
the RSRQ value that triggers the notification,
user should go to the corresponding radio table to
get the current RSRQ value. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.817.0.2 |
cwceLteRsrpOnsetNotifIf RSRP goes below cwceLteRsrpOnsetNotifThreshold
and the service bit in cwceLteRsrpOnsetNotifFlag
is set, this notification will be generated. Object
cwceLteRsrpOnsetNotifFlag will indicate which service
generates this notification and the associated RSRP
will be reported in cwceLteNotifRsrp. Please
note that cwceLteNotifRsrp is used to indicate
the RSRP value that triggers the notification,
user should go to the
corresponding radio table to get the current RSRP
value. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.817.0.3 |
cwceLteRsrpAbateNotifIf RSRP goes above cwceLteRsrqAbateNotifThreshold
and the service bit in cwceLteRsrpOnsetNotifFlag
is set, this notification will be generated. Object
cwceLteRsrpAbateNotifFlag will indicate which service
generates this notification and the associated RSRP
will be reported in cwceLteNotifRsrp. Please
note that cwceLteNotifRsrp is used to indicate
the RSRP value that triggers the notification,
user should go to the corresponding radio table to
get the current RSRP value. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.817.0.4 |
ciscoWanCellExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.817.1 |
ciscoWanCellExtLte OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.817.1.1 |
cwceLteRadio OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.817.1.1.1 |
cwceLteRadioTableThis table contains entPhysicalTable entries which
are capable of providing operational Cellular 4G/LTE
Radio signal parameters and administrative notification
information. SEQUENCE OF CwceLteRadioEntry .1.3.6.1.4.1.9.9.817.1.1.1.1 |
cwceLteRadioEntryAn entry contains management information of Cellular
4G/LTE Radio signal parameters and notification
information.
An entry of this table is created if an entity capable
of providing operational Cellular 4G/LTE Radio signal
parameters and administrative notification information
is detected by the agent.
An entry of this table is deleted by the agent if the
corresponding entry in entPhysicalTable is removed. CwceLteRadioEntry .1.3.6.1.4.1.9.9.817.1.1.1.1.1 |
cwceLteCurrRsrpThis object indicates the LTE RSRP value reported by
the modem.ro CiscoWanCellExtRsrp UNITS "dBm" .1.3.6.1.4.1.9.9.817.1.1.1.1.1.1 |
cwceLteCurrRsrqThis object indicates the LTE RSRQ value reported by
the modem.ro CiscoWanCellExtRsrq UNITS "dB" .1.3.6.1.4.1.9.9.817.1.1.1.1.1.2 |
cwceLteCurrSnrThis object indicates the LTE SNR value reported by
the modem.ro CiscoWanCellExtSNR UNITS "dB" .1.3.6.1.4.1.9.9.817.1.1.1.1.1.3 |
cwceLteCurrSinrThis object indicates the LTE SINR value measured in
decibels (dB) reported by the modem.ro CiscoWanCellExtSINR UNITS "dB" .1.3.6.1.4.1.9.9.817.1.1.1.1.1.4 |
cwceLteCurrCqiIndexThis object indicates he LTE CQI Index reported by
the modem.ro CiscoWanCellExtCqiIndex .1.3.6.1.4.1.9.9.817.1.1.1.1.1.5 |
cwceLteCurrOperatingBandThis object indicates the E-UTRAN Operating Band reported
by the modem.ro Unsigned32 .1.3.6.1.4.1.9.9.817.1.1.1.1.1.6 |
cwceLteNotifRsrpThis object indicates the LTE RSRP value reported by
the modem which triggered the most recent
cwceLteRsrpOnsetNotif or cwceLteRsrpAbateNotif
notification.ro CiscoWanCellExtRsrp .1.3.6.1.4.1.9.9.817.1.1.1.1.1.7 |
cwceLteNotifRsrqThis object indicates the LTE RSRP value reported by
the modem which triggered the most recent
cwceLteRsrqOnsetNotif or cwceLteRsrqAbateNotif
notification.ro CiscoWanCellExtRsrq .1.3.6.1.4.1.9.9.817.1.1.1.1.1.8 |
cwceLteRsrpOnsetNotifThresholdThis object specifies the RSRP onset threshold
value. If the value of cwceLteCurrRsrp goes
below the threshold and the service bit in
cwceLteRsrpOnsetNotifFlag is set, the
cwceLteRsrqOnsetNotif notification for that
service will be sent. The absolute value of
cwceLteRsrpAbateNotifThreshold should be less
than or equal to the absolute value of
cwceLteRsrpOnsetNotifThreshold
(|cwceLteRsrpAbateNotifThreshold| <=
|cwceLteRsrpOnsetNotifThreshold|).rw CiscoWanCellExtRsrp UNITS "dBm" .1.3.6.1.4.1.9.9.817.1.1.1.1.1.9 |
cwceLteRsrpAbateNotifThresholdThis object specifies the RSRP abate
threshold value. If the value of
cwceLteCurrRsrp goes above the threshold
and the service bit in cwceLteRsrpOnsetNotifFlag
is set, the cwceLteRsrpAbateNotif notification
for that service will be sent. The absolute
value of cwceLteRsrpAbateNotifThreshold should
be less than or equal to the absolute value of
cwceLteRsrpOnsetNotifThreshold
(|cwceLteRsrpAbateNotifThreshold| <=
|cwceLteRsrpOnsetNotifThreshold|).rw CiscoWanCellExtRsrp UNITS "dBm" .1.3.6.1.4.1.9.9.817.1.1.1.1.1.10 |
cwceLteRsrqOnsetNotifThresholdThis object specifies the RSRQ onset threshold
value. If the value of cwceLteCurrRsrq goes below
the threshold and the service bit in
cwceLteRsrqOnsetNotifFlag is set, the
cwceLteRsrqOnsetNotif notification for that
service will be sent. The absolute value of
cwceLteRsrqAbateNotifThreshold should be
less than or equal to the absolute value of
cwceLteRsrqOnsetNotifThreshold
(|cwceLteRsrqAbateNotifThreshold| <=
|cwceLteRsrqOnsetNotifThreshold|).rw CiscoWanCellExtRsrq UNITS "dB" .1.3.6.1.4.1.9.9.817.1.1.1.1.1.11 |
cwceLteRsrqAbateNotifThresholdThis object specifies the RSRQ abate
threshold value. If the value of
cwceLteCurrRsrq goes above the threshold
and the service bit in
cwceLteRsrqOnsetNotifFlag is set, the
cwceLteRsrqAbateNotif notification for that
service will be sent. The absolute value of
cwceLteRsrqAbateNotifThreshold should be
less than or equal to the absolute value of
cwceLteRsrqOnsetNotifThreshold
(|cwceLteRsrqAbateNotifThreshold| <=
|cwceLteRsrqOnsetNotifThreshold|).rw CiscoWanCellExtRsrq UNITS "dB" .1.3.6.1.4.1.9.9.817.1.1.1.1.1.12 |
cwceLteRsrpOnsetNotifFlagThis object specifies the flag bitmap to control
the generation of notification cwceLteRsrpOnsetNotif.
Each bit represents a service as defined in
C3gServiceCapability, set the bit value to 1
to enable (and 0 to disable) the generation of
notification cwceLteRsrpOnsetNotif for that service.
The default value of this object is all bits are 0.
Notifications are not generated in technology modes
where RSRP is not relevant.rw C3gServiceCapability (CISCO-WAN-3G-MIB) .1.3.6.1.4.1.9.9.817.1.1.1.1.1.13 |
cwceLteRsrpAbateNotifFlagThis object specifies the flag bitmap to control the generation
of notification cwceLteRsrpAbateNotif. Each bit
represents a service as defined in C3gServiceCapability,
set the bit value to 1 to enable (and 0 to disable) the
generation of notification cwceLteRsrpAbateNotif
for that service. The default value of this object is
all bits are 0. Notifications are not generated in
technology modes where RSRP is not relevant.rw C3gServiceCapability (CISCO-WAN-3G-MIB) .1.3.6.1.4.1.9.9.817.1.1.1.1.1.14 |
cwceLteRsrqOnsetNotifFlagThis object specifies the flag bitmap to control the generation
of notification cwceLteRsrqOnsetNotif. Each bit
represents a service as defined in C3gServiceCapability,
set the bit value to 1 to enable (and 0 to disable) the
generation of notification cwceLteRsrqOnsetNotif
for that service. The default value of this object is
all bits are 0. Notifications are not generated in
technology modes where RSRQ is not relevant.rw C3gServiceCapability (CISCO-WAN-3G-MIB) .1.3.6.1.4.1.9.9.817.1.1.1.1.1.15 |
cwceLteRsrqAbateNotifFlagThis object specifies the flag bitmap to control the generation
of notification cwceLteRsrqAbateNotif. Each bit
represents a service as defined in C3gServiceCapability,
set the bit value to 1 to enable (and 0 to disable) the
generation of notification cwceLteRsrqAbateNotif
for that service. The default value of this object is
all bits are 0. Notifications are not generated in
technology modes where RSRQ is not relevant.rw C3gServiceCapability (CISCO-WAN-3G-MIB) .1.3.6.1.4.1.9.9.817.1.1.1.1.1.16 |
cwceLteRadioHistory OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.817.1.1.1.2 |
cwceLteRadioHistoryRsrpTableThis table contains Cellular 4G/LTE RSRP history.
The history of RSRP are carried in an octet of string.
Each octet in the octet string has a value from 40 to
140 and the 150 value is reserved to indicate an
uninitialized (Invalid) value. The format of
the octet string with n octets is as following:
[ octet 0 is latest,
octet 1 is latest-1,
.
.
octet n-2 is oldest-1,
octet n-1 is oldest ]
To convert the provided value into dBm the following formula
should be used:
dBm = (-1)*value SEQUENCE OF CwceLteRadioHistoryRsrpEntry .1.3.6.1.4.1.9.9.817.1.1.1.2.1 |
cwceLteRadioHistoryRsrpEntryAn entry contains management information of Cellular
4G/LTE RSRP Radio history parameters.
An entry of this table is created if an entity capable
of providing operational Cellular 4G/LTE RSRP Radio
history is detected by the agent.
An entry of this table is deleted by the agent if the
corresponding entry in entPhysicalTable is removed. CwceLteRadioHistoryRsrpEntry .1.3.6.1.4.1.9.9.817.1.1.1.2.1.1 |
cwceLteRadioHistoryRsrpPerSecondThis object indicates per-second RSRP history.
It contains a per-second history of RSRP values
for the last 60 seconds.ro OCTET STRING .1.3.6.1.4.1.9.9.817.1.1.1.2.1.1.1 |
cwceLteRadioHistoryRsrpPerMinuteThis object indicates per-minute weakest RSRP value history.
It contains a per-minute history of weakest RSRP values for
the last 60 minutes. The octet in the string is the weakest
RSRP value measured in a minute interval.ro OCTET STRING .1.3.6.1.4.1.9.9.817.1.1.1.2.1.1.2 |
cwceLteRadioHistoryRsrpPerHourThis object indicates per-hour weakest RSRP value history.
It contains a per-hour history of weakest RSRP values for
the last 72 hours. The octet in the string is the weakest
RSRP value measured in an hour interval.ro OCTET STRING .1.3.6.1.4.1.9.9.817.1.1.1.2.1.1.3 |
cwceLteRadioHistoryRsrqTableThis table contains Cellular 4G/LTE RSRQ history.
The history of RSRQ are carried in an octet of string.
Each octet in the octet string has a value from 3 to 20
and the 25 value is reserved to indicate an uninitialized
(Invalid) value. The format of the octet string with n
octets is as following:
[ octet 0 is latest,
octet 1 is latest-1,
.
.
octet n-2 is oldest-1,
octet n-1 is oldest ]
To convert the provided value into dB the following formula
should be used:
dB = (-1)*value SEQUENCE OF CwceLteRadioHistoryRsrqEntry .1.3.6.1.4.1.9.9.817.1.1.1.2.2 |
cwceLteRadioHistoryRsrqEntryAn entry contains management information of Cellular
4G/LTE RSRQ Radio history parameters.
An entry of this table is created if an entity capable
of providing operational Cellular 4G/LTE RSRQ Radio
history is detected by the agent.
An entry of this table is deleted by the agent if the
corresponding entry in entPhysicalTable is removed. CwceLteRadioHistoryRsrqEntry .1.3.6.1.4.1.9.9.817.1.1.1.2.2.1 |
cwceLteRadioHistoryRsrqPerSecondThis object indicates per-second RSRQ history.
It contains a per-second history of RSRQ values for
the last 60 seconds.ro OCTET STRING .1.3.6.1.4.1.9.9.817.1.1.1.2.2.1.1 |
cwceLteRadioHistoryRsrqPerMinuteThis object indicates per-minute weakest RSRQ value history.
It contains a per-minute history of weakest RSRQ values
for the last 60 minutes. The octet in the string is the
weakest RSRQ value measured in a minute interval.ro OCTET STRING .1.3.6.1.4.1.9.9.817.1.1.1.2.2.1.2 |
cwceLteRadioHistoryRsrqPerHourThis object indicates per-hour weakest RSRQ value history.
It contains a per-hour history of weakest RSRQ values
for the last 72 hours. The octet in the string is
the weakest RSRQ value measured in an hour interval.ro OCTET STRING .1.3.6.1.4.1.9.9.817.1.1.1.2.2.1.3 |
cwceLteProfile OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.817.1.1.2 |
cwceLteIpv4AddrTypeThe object indicates the type of Internet address for
IPv4 addresses used by profiles and PDNs.
The valid value for this object is ipv4(1).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.817.1.1.2.1 |
cwceLteIpv6AddrTypeThe object indicates the type of Internet address for
IPv6 addresses used by profiles and PDNs.
The valid value for this object is ipv6(2).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.817.1.1.2.2 |
cwceLteProfileTableThis table contains Cellular LTE PDN profiles.
Cellular device contains multiple profile entries which can
be used to establish cellular data connections (PDN contexts).
Users can choose any of available PDN profiles to establish
data connections. Data connections are described in
cwcePacketLteSessionTable.
This table is valid only in 4G/LTE Technology mode. SEQUENCE OF CwceLteProfileEntry .1.3.6.1.4.1.9.9.817.1.1.2.3 |
cwceLteProfileEntryAn entry contains management information of Cellular
4G/LTE profile parameters.
Entries in this table can be created or deleted using
cwceLteProfileRowStatus object.
An entry of this table is deleted by the agent if the
corresponding entry in entPhysicalTable is removed. CwceLteProfileEntry .1.3.6.1.4.1.9.9.817.1.1.2.3.1 |
cwceLteProfileIndexThis object specifies profile index, combined with
entPhysicalIndex to access profile table. Unsigned32 .1.3.6.1.4.1.9.9.817.1.1.2.3.1.1 |
cwceLteProfileTypeThis object specifies the configured EPS Bearer type.rw CiscoWanCellExtProtocolType .1.3.6.1.4.1.9.9.817.1.1.2.3.1.2 |
cwceLteProfileIPv4AddrThis object specifies the configured EPS Bearer IPv4 address.
The type of this address is determined by the value of the
cwceLteIpv4AddrType object.
This object is valid only if the corresponding instance value
of cwceLteProfileType is either 'ipv4' or 'ipv4V6'.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.817.1.1.2.3.1.3 |
cwceLteProfileIPv6AddrThis object specifies the configured EPS Bearer IPv6 address.
The type of this address is determined by the value of the
cwceLteIpv6AddrType object.
This object is valid only if the corresponding instance value
of cwceLteProfileType is either 'ipv6' or 'ipv4V6'.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.817.1.1.2.3.1.4 |
cwceLteProfileApnThis object specifies configured profile of Access Point
Name (APN). The value of this object should be provided
by the APN service provider.rw SnmpAdminString .1.3.6.1.4.1.9.9.817.1.1.2.3.1.5 |
cwceLteProfileApnAmbrThis object specifies the profile APN-AMBR.
APN-AMBR is aggregate bit rate across all Non-GBR bearers
and across all PDN connections of the same APN. The value
APN-AMBR is a parameter which is defined as part of a user's
subscription, but may be overridden by the PCRF.rw Unsigned32 .1.3.6.1.4.1.9.9.817.1.1.2.3.1.6 |
cwceLteProfileStorageThis object specifies the storage type for this
conceptual row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.9.817.1.1.2.3.1.7 |
cwceLteProfileRowStatusThis object specifies the status of the conceptual row.
It's used to manage creation, modification and deletion
of rows in this table.
When a row is active, user cannot modify the value of the
objects in that row. All objects in this row need to have
valid value before the row can be active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.817.1.1.2.3.1.8 |
cwceLtePdnTableThis table contains Cellular 4G/LTE Packet Data Network(PDN)
information of all the PDN capable interfaces in the system. SEQUENCE OF CwceLtePdnEntry .1.3.6.1.4.1.9.9.817.1.1.2.4 |
cwceLtePdnEntryAn entry contains management information of Cellular
4G/LTE PDN parameters.
An entry of this table is created if an interface capable
of providing operational Cellular 4G/LTE PDN parameters
is detected by the agent.
An entry of this table is deleted by the agent if the
corresponding entry in ifTable is removed. CwceLtePdnEntry .1.3.6.1.4.1.9.9.817.1.1.2.4.1 |
cwceLtePdnProfileUsedThis object indicates the cwceLteProfileIndex of
the profile used by current EPS bearer to
establish data connection.ro Unsigned32 .1.3.6.1.4.1.9.9.817.1.1.2.4.1.2 |
cwceLtePdnConnStatusThis object indicates PDN session status
of the profile. This is active when the call is
established and PDN context has become active.ro Enumeration .1.3.6.1.4.1.9.9.817.1.1.2.4.1.3 |
cwceLtePdnTypeThis object indicates current session PDN type.ro CiscoWanCellExtProtocolType .1.3.6.1.4.1.9.9.817.1.1.2.4.1.4 |
cwceLtePdnIpv4AddrThis object indicates current session
EPS Bearer IPv4 address.
The type of this address is determined by
the value of the cwceLteIpv4AddrType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.817.1.1.2.4.1.5 |
cwceLtePdnIpv6AddrThis object indicates current session
EPS Bearer IPv6 address.
The type of this address is determined by
the value of the cwceLteIpv6AddrType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.817.1.1.2.4.1.6 |
cwceLtePdnPriDnsIpv4AddrThis object indicates current session
EPS Bearer Primary DNS IPv4 address.
The type of this address is determined by
the value of the cwceLteIpv4AddrType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.817.1.1.2.4.1.7 |
cwceLtePdnSecDnsIpv4AddrThis object indicates current session
EPS Bearer Secondary DNS IPv4 address.
The type of this address is determined by
the value of the cwceLteIpv4AddrType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.817.1.1.2.4.1.8 |
cwceLtePdnPriDnsIpv6AddrThis object indicates current session
EPS Bearer Primary DNS IPv6 address.
The type of this address is determined by
the value of the cwceLteIpv6AddrType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.817.1.1.2.4.1.9 |
cwceLtePdnSecDnsIpv6AddrThis object indicates current session
EPS Bearer Secondary DNS IPv6 address.
The type of this address is determined by
the value of the cwceLteIpv6AddrType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.817.1.1.2.4.1.10 |
cwceLteEpsBearerQosTableThis table contains 4G/LTE QoS parameters
requested by modem to the cellular network
via PDN Context Activation Request message. SEQUENCE OF CwceLteEpsBearerQosEntry .1.3.6.1.4.1.9.9.817.1.1.2.5 |
cwceLteEpsBearerQosEntryAn entry contains management information of Cellular
4G/LTE QoS parameters.
An entry of this table is created if an interface
capable of providing operational Cellular 4G/LTE
QoS parameters is detected by the agent.
An entry of this table is deleted by the agent
if the corresponding entry in ifTable is removed. CwceLteEpsBearerQosEntry .1.3.6.1.4.1.9.9.817.1.1.2.5.1 |
cwceLteEpsBearerIdThis object indicates the EPS Bearer Identity which is
allocated by the Mobility Management Entity (MME). Unsigned32 .1.3.6.1.4.1.9.9.817.1.1.2.5.1.1 |
cwceLteEpsBearerTypeThis object indicates the type of bearers.
gbr - Guaranteed Bit Rate(GBR).
GBR bearer has a minimum amount of bandwidth that
is reserved by the network, and these resources are
always consumed in a radio base station regardless
of whether it is used or not.
nonGbr - non-Guaranteed Bit Rate(Non-GBR).
Non-GBR bearers are for best-effort services and do
not consume any network
resources.
unknown - the type of bearers is unknown.ro Enumeration .1.3.6.1.4.1.9.9.817.1.1.2.5.1.2 |
cwceLteEpsQCIThis object indicates the QoS Class Identifier(QCI).
The QCI along with the ARP characterizes the QoS of
the bearer.ro Unsigned32 .1.3.6.1.4.1.9.9.817.1.1.2.5.1.3 |
cwceLteEpsArpThis object indicates the Allocation and Retention
Priority(ARP).
ARP is a QoS parameter designed to facilitate decisions
as to whether a bearer establishment/modification request
can be accepted.ro Unsigned32 .1.3.6.1.4.1.9.9.817.1.1.2.5.1.4 |
cwceLteEpsBearerResTypeThis object indicates the Bearer resource type.ro Enumeration .1.3.6.1.4.1.9.9.817.1.1.2.5.1.5 |
cwceLteEpsGbrThis object indicates the Guaranteed Bit Rate(GBR) which
determines the resource reservation to guarantee a
given data rate.ro Unsigned32 .1.3.6.1.4.1.9.9.817.1.1.2.5.1.6 |
cwceLteEpsMbrThis object indicates the Maximum Bit Rate(MBR) which is
used for policing the user traffic.ro Unsigned32 .1.3.6.1.4.1.9.9.817.1.1.2.5.1.7 |
cwceLteEpsAmbrThis object indicates the Aggregated Maximum Bit Rate.
This object is valid only if the value of the corresponding
cwceLteEpsBearerResType is 'defaultBearer'.ro Unsigned32 .1.3.6.1.4.1.9.9.817.1.1.2.5.1.8 |
cwceLteEpsTotalBytesTxThis object indicates the total data bytes transmitted
by this bearer.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.817.1.1.2.5.1.9 |
cwceLteEpsTotalBytesRxThis object indicates the total data bytes received
by this bearer.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.817.1.1.2.5.1.10 |
cwceLteEpsPacketsTxThis object indicates the number of packets transmitted
by this bearer.ro Counter64 UNITS "packets" .1.3.6.1.4.1.9.9.817.1.1.2.5.1.11 |
cwceLteEpsPacketsRxThis object indicates the number of packets received
by this bearer.ro Counter64 UNITS "packets" .1.3.6.1.4.1.9.9.817.1.1.2.5.1.12 |
ciscoWanCellExtMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.817.2 |
ciscoWanCellExtMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.817.2.1 |
ciscoWanCellExtMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.817.2.2 |