CISCO-WAN-ATM-CUG-MIB
The CISCO-WAN-ATM-CUG-MIB manages Closed User Group (CUG) supplementary service configurations and access control policies on Cisco ATM switches, specifically monitoring group membership restrictions, call origination/termination permissions, and intra-group communication constraints defined by ITU-T Q.2955.1.
Imported Objects
Objects
23 total| Object Name |
|---|
ciscoWanAtmCugMIBThis MIB module is intended for the management of
'Closed User Group(CUG)' in Cisco ATM switches.
This MIB definition is based upon 'Closed User Group'
recommended by International Telecommunication Union(ITU).
The CUG supplementary service enables users to form groups,
to and from which access is restricted. A specific user may
be member of one or more closed user groups. Members of a
specific closed user group can communicate among themselves
but not, in general, with users outside the group. Specific
CUG members can have additional capabilities that allow
them to originate calls to destinations outside the group,
and/or to receive calls from outside the group. Specific
CUG members can have additional restrictions that prevent
them from originating calls to other members of the CUG,
or from receiving calls from other members of the CUG.
ITU-T Q.2955.1 Stage 3 description for community of interest
supplementary services using B-ISDN Digital Subscriber
Signalling System No.2(DSS 2): Closed User Group(CUG). MODULE-IDENTITY .1.3.6.1.4.1.9.9.99999 |
cwaCugMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99999.0 |
cwaCugMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99999.1 |
cwaCug OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99999.1.1 |
cwaCugTableThis table contains a sequence of CUGs for each
ATM address. SEQUENCE OF CwaCugEntry .1.3.6.1.4.1.9.9.99999.1.1.1 |
cwaCugEntryThe entry represents one CUG for an ATM address. CwaCugEntry .1.3.6.1.4.1.9.9.99999.1.1.1.1 |
cwaAtmAddressA provisioned ATM address on the managed system. AtmAddr (ATM-TC-MIB) .1.3.6.1.4.1.9.9.99999.1.1.1.1.1 |
cwaAddressLengthThis is the length (in bits) of the 'cwtAtmAddress'. CiscoAtmAddressLength .1.3.6.1.4.1.9.9.99999.1.1.1.1.2 |
cwaCugIndexThe CUG index is a parameter used by the calling
user to select a particular CUG when originating
a call. The index is also used by the network to
indicate to the called user the CUG from which
an incoming call has originated. This index has
only local significance.
Each 'cwaCugIndex' assigned to an ATM address must be
unique for this ATM address. For each 'cwaCugIndex'
must have one corresponding cwaInterLockCode
assigned. Integer32 .1.3.6.1.4.1.9.9.99999.1.1.1.1.3 |
cwaAddressPlanThis is the type of the ATM address associated
with this entry.rw CiscoAtmAddressType .1.3.6.1.4.1.9.9.99999.1.1.1.1.4 |
cwaInterlockCodeThis is the 'Closed User Group(CUG) Interlock Code'
associated with this entry.rw CiscoAtmInterlockCode .1.3.6.1.4.1.9.9.99999.1.1.1.1.5 |
cwaCallsBarredThis variable indicates if this member can receive calls
from or make calls to other members of the same CUG.
When this variable is set to none(1), it means this
CUG member can receive calls from and make calls to
other members in the same CUG.
When this variable is set to incoming(2), it means this
member cannot receive incoming calls from other members
in the same CUG.
When this variable is set to outgoing(3), it means this
member cannot make calls to other members in the same CUG.rw Enumeration .1.3.6.1.4.1.9.9.99999.1.1.1.1.6 |
cwaCugRowStatusThe row status of each entry in this table.
Once the 'cwaInterlockCode' is created, it cannot be
modified. If the management station wants to
assign a different Interlock Code to the same
'cwaCugIndex', the management station must remove
the current entry and then add a new entry with
the same 'cwaCugIndex' and a different 'cwaInterlockCode.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.99999.1.1.1.1.7 |
cwaAddressCug OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99999.1.2 |
cwaAddressCugTableA table of CUG parameters associated with
each provisioned ATM address. SEQUENCE OF CwaAddressCugEntry .1.3.6.1.4.1.9.9.99999.1.2.1 |
cwaAddressCugEntryThe managed system will automatically create
an entry in this table when the first CUG
is created for the same ATM address in
'cwaCugTable'.
A entry in this table is automatically
destroyed by the managed system when all
CUGs of the same ATM address are destroyed
in the 'cwaCugTable'. CwaAddressCugEntry .1.3.6.1.4.1.9.9.99999.1.2.1.1 |
cwaCugAtmAddressPlanThis is the type of the ATM address associated
with this entry.rw CiscoAtmAddressType .1.3.6.1.4.1.9.9.99999.1.2.1.1.1 |
cwaIncomingAccessThis variable decides whether 'incoming access'
is allowed for a CUG user.
the 'incoming access' allows a CUG user to receive
calls from all other non-CUG users and also from those
other CUG user that allow 'outgoing access'.
When the value is set to notAllowed(1), the
'incoming access' is not allowed.
When the value is set to allowed(2), the 'incoming
access' is allowed.
When this entry is created, this variable has a
value of notAllowed(1).rw Enumeration .1.3.6.1.4.1.9.9.99999.1.2.1.1.2 |
cwaOutgoingAccessThis variable decides whether 'outgoing access'
is allowed for a CUG user.
The 'outgoing access' allows a member of a CUG to make
calls to other non-CUG members and also to those
other CUG members that allow 'incoming access'.
When the value is set to notAllowed(1), the 'outgoinging
access' is not allowed.
When the value is set to allowedPerCall(2), the
'outgoing access' is granted on a per call basis. This
means for each call, the 'outgoing access' request must
be part of the call SETUP message.
When the value is set to allowedPermanently(3),
the 'outgoing access' is allowed for all calls.
When this entry is created by the managed
system, this variable has a value of notAllowed(1).rw Enumeration .1.3.6.1.4.1.9.9.99999.1.2.1.1.3 |
cwaPreferentialCugThe CUG index of the 'preferential CUG' for this address.
There can be only one 'preferential CUG' for an address.
A CUG user subscribing to 'preferential CUG' nominates a
CUG index which the network uses as a default to identify
the required CUG in the absence of any CUG information
in the outgoing call request.
A value of zero means the address does not have a
preferential CUG. The value of this variable must
correspond to a 'cwaCugIndex' of an entry in the
'cwaCugTable'. When an entry is created by the managed
system, this variable has a value of 0.
When selecting a 'preferential' CUG in the address's CUGs,
the corresponding CUG must allow outgoing calls.
This means 'cwaCallsBarred'(Outgoing Calls Barred)
must not have a value of outgoing(2) for the corresponding
CUG.rw Integer32 .1.3.6.1.4.1.9.9.99999.1.2.1.1.4 |
ciscoWanAtmCugMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99999.3 |
ciscoWanAtmCugMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99999.3.1 |
ciscoWanAtmCugMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99999.3.2 |
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-ENTITY-VENDORTYPE-OID-MIB maps Cisco-specific hardware component identifiers to the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of physical device types such as line cards, power supplies, and fans within Cisco infrastructure. This mapping ensures that SNMP management systems can accurately correlate physical inventory entries with vendor-specific component definitions for accurate device discovery and monitoring.
The CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB provides SNMP-based monitoring and management of Cisco Unified Computing System (UCS) hardware components, including chassis, blades, fabric interconnects, and power supplies. It exposes critical operational metrics such as device status, port states, temperature readings, fan speeds, and power consumption data for infrastructure health assessment.
The CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB enables SNMP-based monitoring and management of physical and virtual network adapter interfaces, including link status, traffic counters, error statistics, and port configuration parameters, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers.
The CISCO-UNIFIED-COMPUTING-TC-MIB module defines standard textual conventions and data type definitions required for monitoring Cisco Unified Computing System (UCS) hardware components, including server blades, fabric interconnects, and chassis resources. These definitions enable consistent interpretation of specific UCS metrics such as power supply status, fan speeds, thermal readings, and port utilization across SNMP management applications.
The CISCO-UNIFIED-COMPUTING-FABRIC-MIB enables SNMP-based monitoring and management of the Cisco UCS Fabric Interconnects and associated fabric switching infrastructure, exposing metrics for port states, link utilization, error counters, and fabric topology status. It facilitates granular visibility into the physical and logical fabric layers, including uplink/downlink interfaces, VLAN configurations, and fabric failover conditions within the unified computing environment.
The STARENT-MIB module provides SNMP management and monitoring capabilities for Cisco ASR 5000 and ASR 5500 multimedia core platforms, specifically exposing metrics related to 2G/3G/4G and WiFi subscriber sessions, inline service states, and carrier-class high-availability status.