CISCO-VOICE-ATM-DIAL-CONTROL-MIB
AI MIB Summary
The CISCO-VOICE-ATM-DIAL-CONTROL-MIB monitors and manages ATM voice dialing sessions, call setup parameters, and interface states on Cisco routers and switches within an ATM-based data network. It provides visibility into ATM-specific call control metrics, including active and pending dialer interface sessions, PVC status, and signaling events, extending standard IETF dial control capabilities to ATM environments.
This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing ATM management information over a data network.
54
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
ciscoVoiceAtmDialControlMIB OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35 |
IMPORTS Unknown .1.3.6.1.4.1.9.10.35 |
ciscoVoiceAtmDialControlMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.1 |
cvAtmCallHistory OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.1.1 |
cvAtmCallHistoryTableThis table is the ATM extension to the call history table of
IETF Dial Control MIB. It contains ATM call leg information
about specific voice over ATM call. SEQUENCE OF CvAtmCallHistoryEntry .1.3.6.1.4.1.9.10.35.1.1.1 |
cvAtmCallHistoryEntryThe information regarding a single ATM call leg.
An entry of this table is created when its associated call
history entry in the IETF Dial Control MIB is created and
the call history entry contains information for the call
establishment to the peer on the data network backbone via
a voice over ATM peer.
Th the IETF Dial Control MIB is deleted. CvAtmCallHistoryEntry .1.3.6.1.4.1.9.10.35.1.1.1.1 |
cvAtmCallHistoryConnectionIdThe global call identifier for the ATM call.ro CvcGUid -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.35.1.1.1.1.1 |
cvAtmCallHistoryVpiThe VPI used for this ATM connection.ro INTEGER .1.3.6.1.4.1.9.10.35.1.1.1.1.2 |
cvAtmCallHistoryVciThe VCI used for this ATM connection.ro INTEGER .1.3.6.1.4.1.9.10.35.1.1.1.1.3 |
cvAtmCallHistoryLowerIfNameThe ifName of the ATM interface associated with this
call.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.35.1.1.1.1.4 |
cvAtmCallHistorySessionTargetThe object specifies the session target of the peer that
was used for the voice over ATM call. A zero length string
indicates that the value is unavailable.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.35.1.1.1.1.5 |
cvAtmCallHistorySubchannelIDThe subchannel used for this ATM connection.ro INTEGER .1.3.6.1.4.1.9.10.35.1.1.1.1.6 |
cvAtmCallHistorySessionProtocolSpecifies the session protocol used on this call.ro CvAtmSessionProtocol -- Rsyntax INTEGER { -- other(1), -- ciscoSwitched(2) -- } .1.3.6.1.4.1.9.10.35.1.1.1.1.7 |
cvAtmCallHistoryCalledNumberSpecifes the number called for trunk connection calls. A
zero length string indicates that this data is unavailable.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.35.1.1.1.1.8 |
cvAtmCallHistoryDtmfRelaySpecifies if Dtmf Relay was enabled for the call.ro TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.10.35.1.1.1.1.9 |
cvAtmCallHistoryUseSeqNumbersSpecifies if Sequence Numbers were used on the voice data
packets.ro TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.10.35.1.1.1.1.10 |
cvAtmCallActive OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.1.2 |
cvAtmCallActiveTableThis table is the ATM extension to the active call table of
IETF Dial Control MIB. It contains ATM call leg information
about specific voice over ATM call. SEQUENCE OF CvAtmCallActiveEntry .1.3.6.1.4.1.9.10.35.1.2.1 |
cvAtmCallActiveEntryThe information regarding a single ATM call leg.
An entry of this table is created when its associated call
active entry in the IETF Dial Control MIB is created. The
call active entry contains information for the call
establishment to the peer on the data network backbone via
a voice over ATM peer.
The entry is deleted when its associated call active entry
in the IETF Dial Control MIB is deleted. CvAtmCallActiveEntry .1.3.6.1.4.1.9.10.35.1.2.1.1 |
cvAtmCallActiveConnectionIdThe global call identifier for the ATM call.ro CvcGUid -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.35.1.2.1.1.1 |
cvAtmCallActiveVpiThe VPI used for this ATM connection.ro INTEGER .1.3.6.1.4.1.9.10.35.1.2.1.1.2 |
cvAtmCallActiveVciThe VCI used for this ATM connection.ro INTEGER .1.3.6.1.4.1.9.10.35.1.2.1.1.3 |
cvAtmCallActiveLowerIfNameThe ifName of the ATM interface associated with this
call.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.35.1.2.1.1.4 |
cvAtmCallActiveSessionTargetThe object specifies the session target of the peer that
is used for the voice over ATM call. A null string indicates
that the value is unavailable.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.35.1.2.1.1.5 |
cvAtmCallActiveSubchannelIDThe subchannel used for this ATM connection.ro INTEGER .1.3.6.1.4.1.9.10.35.1.2.1.1.6 |
cvAtmCallActiveSessionProtocolSpecifies the session protocol being used on this call.ro CvAtmSessionProtocol -- Rsyntax INTEGER { -- other(1), -- ciscoSwitched(2) -- } .1.3.6.1.4.1.9.10.35.1.2.1.1.7 |
cvAtmCallActiveCalledNumberSpecifes the number called for trunk connection calls. A
null string indicates that this data is unavailable.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.35.1.2.1.1.8 |
cvAtmCallActiveDtmfRelaySpecifies if Dtmf Relay is enabled for the call.ro TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.10.35.1.2.1.1.9 |
cvAtmCallActiveUseSeqNumbersSpecifies if Sequence Numbers are used on the voice data
packets.ro TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.10.35.1.2.1.1.10 |
cvAtmDialPeer OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.1.3 |
cvAtmPeerCfgTableThe table contains the Voice over ATM (ATM) peer specific
information that is required to accept or place voice calls
via the ATM backbone with the session protocol specified
in cvAtmPeerCfgSessionProtocol. SEQUENCE OF CvATMPeerCfgEntry .1.3.6.1.4.1.9.10.35.1.3.1 |
cvAtmPeerCfgEntryA single ATM specific Peer. One entry per ATM encapsulation.
The entry is created when its associated 'voiceOverATM(152)'
encapsulation ifEntry is created.
This entry is deleted when its associated ifEntry is deleted. CvATMPeerCfgEntry .1.3.6.1.4.1.9.10.35.1.3.1.1 |
cvAtmPeerCfgSessionProtocolThe object specifies the session protocol to be used
for Internet call between local and remote router via
ATM backbone.rw CvAtmSessionProtocol -- Rsyntax INTEGER { -- other(1), -- ciscoSwitched(2) -- } .1.3.6.1.4.1.9.10.35.1.3.1.1.1 |
cvAtmPeerCfgInterfaceNameThe object specifies the ifName on which the call will go
out.
A zero length string indicates that no interface has been
assigned.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.35.1.3.1.1.2 |
cvAtmPeerCfgVpiThe VPI used for this ATM connection.rw INTEGER .1.3.6.1.4.1.9.10.35.1.3.1.1.3 |
cvAtmPeerCfgVciThe VCI used for this ATM connection.rw INTEGER .1.3.6.1.4.1.9.10.35.1.3.1.1.4 |
cvAtmPeerCfgVcNameThe VC Name used for this ATM connection.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.35.1.3.1.1.5 |
cvAtmPeerCfgCoderRateThis object specifies the default voice coder rate of speech for
the ATM peer.rw CvcSpeechCoderRate -- Rsyntax INTEGER { -- g729r8000(1), -- g729Ar8000(2), -- g726r16000(3), -- g726r24000(4), -- g726r32000(5), -- g711ulawr64000(6), -- g711Alawr64000(7), -- g728r16000(8), -- g723r6300(9), -- g723r5300(10), -- gsmr13200(11), -- g729Br8000(12), -- g729ABr8000(13), -- g723Ar6300(14), -- g723Ar5300(15), -- g729IETFr8000(16) -- } .1.3.6.1.4.1.9.10.35.1.3.1.1.6 |
cvAtmPeerCfgCodecBytesThis object specifies the payload size for the voice packets
to be transmitted during the call.rw INTEGER .1.3.6.1.4.1.9.10.35.1.3.1.1.7 |
cvAtmPeerCfgFaxRateThis object specifies the default transmit rate of FAX for the
ATM peer. If the value of this object is 'none', then
the Fax relay feature is disabled; otherwise the Fax relay
feature is enabled.rw CvcFaxTransmitRate -- Rsyntax INTEGER { -- none(1), -- voiceRate(2), -- fax2400(3), -- fax4800(4), -- fax7200(5), -- fax9600(6), -- fax14400(7), -- fax12000(8) -- } .1.3.6.1.4.1.9.10.35.1.3.1.1.8 |
cvAtmPeerCfgFaxBytesThis object specifies the payload size for the fax packets
to be transmitted during the call.rw INTEGER .1.3.6.1.4.1.9.10.35.1.3.1.1.9 |
cvAtmPeerCfgInBandSignalingThis object specifies the type of in-band signaling used
between the two end points of the call and is used by the
router to determine how to interpret the ABCD signaling bits
sent as part of the voice payload data.rw CvcInBandSignaling -- Rsyntax INTEGER { -- cas(1), -- none(2), -- cept(3), -- transparent(4) -- } .1.3.6.1.4.1.9.10.35.1.3.1.1.10 |
cvAtmPeerCfgVADEnableThis object specifies whether or not VAD (Voice Activity
Detection) is enabled. If the object value is 'false', then
the voice data is continuously transmitted to ATM backbone.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.10.35.1.3.1.1.11 |
cvAtmPeerCfgUseSeqNumbersThis object specifies whether or not Sequence Numbers are
generated on voice packets.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.10.35.1.3.1.1.12 |
cvAtmPeerCfgDtmfRelayThis object specifies whether or not Dtmf Relay is enabled.
If it is then dtmf digits are transported as FRF11 Annex
C packets, instead of being encoded as speech.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.10.35.1.3.1.1.13 |
ciscoVoiceAtmDialControlMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.2 |
ciscoVoiceAtmDialControlMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.2.0 |
ciscoVoiceAtmDialControlMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.3 |
ciscoVoiceAtmDialControlMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.3.1 |
ciscoVoiceAtmDialControlMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.3.1.1 |
ciscoVoiceAtmDialControlMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.3.2 |
cvAtmCallHistoryGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.3.2.1 |
cvAtmCallActiveGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.3.2.2 |
cvAtmPeerCfgGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.35.3.2.3 |