CISCO-SWITCH-NETFLOW-MIB
The CISCO-SWITCH-NETFLOW-MIB enables SNMP-based monitoring of NetFlow export statistics, active flow records, and cache utilization on Cisco Layer 2 and Layer 3 switching platforms. It provides granular visibility into traffic flow metrics, including packet and byte counts, protocol distributions, and flow table occupancy for network capacity planning and security analysis.
Imported Objects
Objects
29 total| Object Name |
|---|
ciscoSwitchNetflowMIBThis MIB module defines management objects for the
Netflow features on Cisco Layer 2 and Layer 3 devices. MODULE-IDENTITY .1.3.6.1.4.1.9.9.737 |
ciscoSwitchNetflowMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.0 |
csnUsageThreshExceededNotifA csnUsageThreshExceededNotif is sent if the Netflow
table usage has exceeded the configured threshold
specified by csnUsageThreshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.737.0.1 |
ciscoSwitchNetflowMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.1 |
csnAccounting OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.1.1 |
csnAccGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.1.1.1 |
csnNetflowDirectionTypeThis object specifies the direction type of Netflow
enabled on this system.rw CsnNetflowDirectionTypes .1.3.6.1.4.1.9.9.737.1.1.1.1 |
csnAccNotifControl OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.1.1.2 |
csnUsageThreshExceedNotifEnableThis object specifies whether the system produces the
csnUsageThreshExceededNotif.
A 'false' value will prevent csnUsageThreshExceededNotif
notifications from being generated by this system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.737.1.1.2.1 |
cshAccUsageThresh OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.1.1.3 |
csnUsageThreshTableA table containing Netflow table usage monitoring
configuration information. SEQUENCE OF CsnUsageThreshEntry .1.3.6.1.4.1.9.9.737.1.1.3.1 |
csnUsageThreshEntryA conceptual row of csnUsageThreshTable, containing
the Netflow table usage monitoring configuration
information. CsnUsageThreshEntry .1.3.6.1.4.1.9.9.737.1.1.3.1.1 |
csnUsageDirectionThis object specifies the direction of Netflow
on the system. CsnNetflowDirectionTypes .1.3.6.1.4.1.9.9.737.1.1.3.1.1.1 |
csnUsageThresholdThis object specifies the Netflow table usage threshold
in percentage value.
When the value of this object is set to zero, Netflow table
usage monitoring is disabled.
When the value of this object is set to greater than zero,
Netflow table usage monitoring is enabled.rw Percent (CISCO-QOS-PIB-MIB) .1.3.6.1.4.1.9.9.737.1.1.3.1.1.2 |
csnUsageIntervalThis object specifies the interval in seconds over
which the Netflow table usage (the value of csnUtilization)
will be compared against the threshold specified by
csnUsageThreshold.rw Unsigned32 .1.3.6.1.4.1.9.9.737.1.1.3.1.1.3 |
csnAccUtilization OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.1.1.4 |
csnUtilizationTableA table containing Netflow table utilization information
of each switching engine and a Newflow direction type. SEQUENCE OF CsnUtilizationEntry .1.3.6.1.4.1.9.9.737.1.1.4.1 |
csnUtilizationEntryA conceptual row of csnUtilizationTable, containing
the Netflow table utilization information for a particular
switching engine and a particular Netflow type. CsnUtilizationEntry .1.3.6.1.4.1.9.9.737.1.1.4.1.1 |
csnUtilizationThis object indicates the percentage of Netflow table
utilization.ro Percent (CISCO-QOS-PIB-MIB) .1.3.6.1.4.1.9.9.737.1.1.4.1.1.1 |
csnAccNetflowTableSize OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.1.1.5 |
csnNetflowTableSizeTableA table containing Netflow table size information
of each Netflow type supported in the system. SEQUENCE OF CsnNetflowTableSizeEntry .1.3.6.1.4.1.9.9.737.1.1.5.1 |
csnNetflowTableSizeEntryA conceptual row of csnNetflowTableSizeTable, containing
the Netflow table size information for a particular
Netflow type. CsnNetflowTableSizeEntry .1.3.6.1.4.1.9.9.737.1.1.5.1.1 |
csnNetflowTableTotalEntriesThis object indicates the total number of entries
in the Netflow table for a particular Netflow
direction type.ro Unsigned32 .1.3.6.1.4.1.9.9.737.1.1.5.1.1.1 |
csnAccSampler OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.1.1.6 |
csnSamplerTotalThis object indicates the total number of Netflow
samplers in the device.ro Unsigned32 .1.3.6.1.4.1.9.9.737.1.1.6.1 |
csnSamplerAvailableThis object indicates the number of Netflow samplers
available in the system.ro Unsigned32 .1.3.6.1.4.1.9.9.737.1.1.6.2 |
ciscoSwitchNetflowMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.2 |
csnMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.2.1 |
csnMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.737.2.2 |
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-ENTITY-VENDORTYPE-OID-MIB maps Cisco-specific hardware component identifiers to the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of physical device types such as line cards, power supplies, and fans within Cisco infrastructure. This mapping ensures that SNMP management systems can accurately correlate physical inventory entries with vendor-specific component definitions for accurate device discovery and monitoring.
The CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB provides SNMP-based monitoring and management of Cisco Unified Computing System (UCS) hardware components, including chassis, blades, fabric interconnects, and power supplies. It exposes critical operational metrics such as device status, port states, temperature readings, fan speeds, and power consumption data for infrastructure health assessment.
The CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB enables SNMP-based monitoring and management of physical and virtual network adapter interfaces, including link status, traffic counters, error statistics, and port configuration parameters, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers.
The CISCO-UNIFIED-COMPUTING-TC-MIB module defines standard textual conventions and data type definitions required for monitoring Cisco Unified Computing System (UCS) hardware components, including server blades, fabric interconnects, and chassis resources. These definitions enable consistent interpretation of specific UCS metrics such as power supply status, fan speeds, thermal readings, and port utilization across SNMP management applications.
The CISCO-UNIFIED-COMPUTING-FABRIC-MIB enables SNMP-based monitoring and management of the Cisco UCS Fabric Interconnects and associated fabric switching infrastructure, exposing metrics for port states, link utilization, error counters, and fabric topology status. It facilitates granular visibility into the physical and logical fabric layers, including uplink/downlink interfaces, VLAN configurations, and fabric failover conditions within the unified computing environment.
The STARENT-MIB module provides SNMP management and monitoring capabilities for Cisco ASR 5000 and ASR 5500 multimedia core platforms, specifically exposing metrics related to 2G/3G/4G and WiFi subscriber sessions, inline service states, and carrier-class high-availability status.