CISCO-QOS-PIB-MIB
AI MIB Summary
The CISCO-QOS-PIB-MIB enables the provisioning and management of Cisco Quality of Service (QoS) policies via the Policy Information Base (PIB) framework, specifically facilitating the configuration of traffic classification, policing, shaping, and queuing parameters on Cisco IOS and IOS-XE platforms.
The Cisco QOS Policy PIB for provisioning QOS policy.
Main OID:
ciscoQosPIBMIB.1.3.6.1.4.1.9.18.2.1
142
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
142 total| Object Name |
|---|
ciscoQosPIBMIBThe Cisco QOS Policy PIB for provisioning QOS policy. MODULE-IDENTITY .1.3.6.1.4.1.9.18.2.1 |
qosPIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.18.2.1.1 |
qosPIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.18.2.1.1.1 |
qosPIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.18.2.1.1.2 |
qosDeviceConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.18.2.1.2 |
qosDevicePibIncarnationTableThis class contains a single policy instance that identifies
the current incarnation of the PIB and the PDP that installed
this incarnation. The instance of this class is reported to
the PDP at client connect time so that the PDP can (attempt
to) ascertain the current state of the PIB. SEQUENCE OF QosDevicePibIncarnationEntry .1.3.6.1.4.1.9.18.2.1.2.1 |
qosDevicePibIncarnationEntryThe single policy instance of this class identifies the
current incarnation of the PIB and the PDP that installed
this incarnation. QosDevicePibIncarnationEntry .1.3.6.1.4.1.9.18.2.1.2.1.1 |
qosDeviceIncarnationIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.2.1.1.1 |
qosDevicePdpNameThe name of the PDP that installed the current incarnation of
the PIB into the device. By default it is the zero length
string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9.18.2.1.2.1.1.2 |
qosDevicePibIncarnationAn octet string to identify the current incarnation. It has
meaning to the PDP that installed the PIB and perhaps its
standby PDPs. By default the empty string.ro OCTET STRING .1.3.6.1.4.1.9.18.2.1.2.1.1.3 |
qosDevicePibTtlThe number of seconds after a client close or TCP timeout for
which the PEP continues to enforce the policy in the PIB.
After this interval, the PIB is consired expired and the
device no longer enforces the policy installed in the PIB.ro Unsigned32 .1.3.6.1.4.1.9.18.2.1.2.1.1.4 |
qosDeviceAttributeTableThe single instance of this class indicates specific
attributes of the device. These include configuration values
such as the configured PDP addresses, the maximum message
size, and specific device capabilities. The latter include
input port-based and output port-based classification and/or
policing, support for flow based policing, aggregate based
policing, traffic shaping capabilities, etc. SEQUENCE OF QosDeviceAttributeEntry .1.3.6.1.4.1.9.18.2.1.2.2 |
qosDeviceAttributeEntryThe single instance of this class indicates specific
attributes of the device. QosDeviceAttributeEntry .1.3.6.1.4.1.9.18.2.1.2.2.1 |
qosDeviceAttributeIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.2.2.1.1 |
qosDevicePepDomainThe QoS domain that this device belongs to. This is
configured locally on the device (perhaps by some management
protocol such as SNMP). By default, it is the zero-length
string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9.18.2.1.2.2.1.2 |
qosDevicePrimaryPdpThe address of the PDP configured to be the primary PDP for
the device.ro IpAddress .1.3.6.1.4.1.9.18.2.1.2.2.1.3 |
qosDeviceSecondaryPdpThe address of the PDP configured to be the secondary PDP for
the device. An address of zero indicates no secondary is
configured.ro IpAddress .1.3.6.1.4.1.9.18.2.1.2.2.1.4 |
qosDeviceMaxMessageSizeThe maximum size message that this PEP is capable of
receiving in bytes. A value of zero means that the maximum
message size is unspecified (but does not mean it is
unlimited). A message greater than this maximum results in a
MessageTooBig error on a 'no commit' REP.ro Unsigned32 .1.3.6.1.4.1.9.18.2.1.2.2.1.5 |
qosDeviceCapabilitiesAn enumeration of device capabilities. Used by the PDP to
select policies and configuration to push to the PEP.ro Bits .1.3.6.1.4.1.9.18.2.1.2.2.1.6 |
qosInterfaceTypeTableThis class describes the interface types of the interfaces
that exist on the device. It includes the queue type, role
combination and capabilities of interfaces. The PEP does not
report which specific interfaces have which characteristics. SEQUENCE OF QosInterfaceTypeEntry .1.3.6.1.4.1.9.18.2.1.2.3 |
qosInterfaceTypeEntryAn instance of this class describes a role combination for
an interface type of an interface that exists on the device. QosInterfaceTypeEntry .1.3.6.1.4.1.9.18.2.1.2.3.1 |
qosInterfaceTypeIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.2.3.1.1 |
qosInterfaceQueueTypeThe interface type in terms of number of queues and
thresholds.ro QosInterfaceQueueType .1.3.6.1.4.1.9.18.2.1.2.3.1.2 |
qosInterfaceTypeRolesA combination of roles on at least one interface of type
qosInterfaceType.ro RoleCombination .1.3.6.1.4.1.9.18.2.1.2.3.1.3 |
qosInterfaceTypeCapabilitiesAn enumeration of interface capabilities. Used by the PDP to
select policies and configuration to push to the PEP.ro QosInterfaceTypeCapabilities .1.3.6.1.4.1.9.18.2.1.2.3.1.4 |
qosDomainConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.18.2.1.3 |
qosDiffServMappingTableMaps each DSCP to a marked-down DSCP. Also maps each DSCP to
an IP precedence and QosLayer2Cos. When configured for the
first time, all 64 entries of the table must be
specified. Thereafter, instances may be modified (with a
delete and install in a single decision) but not deleted
unless all instances are deleted. SEQUENCE OF QosDiffServMappingEntry .1.3.6.1.4.1.9.18.2.1.3.1 |
qosDiffServMappingEntryAn instance of this class represents mappings from a DSCP. QosDiffServMappingEntry .1.3.6.1.4.1.9.18.2.1.3.1.1 |
qosDscpA DSCP for which this entry contains mappings. Dscp .1.3.6.1.4.1.9.18.2.1.3.1.1.1 |
qosMarkedDscpThe DSCP to use instead of the qosDscp when the packet is out
of profile and hence marked as such.ro Dscp .1.3.6.1.4.1.9.18.2.1.3.1.1.2 |
qosL2CosThe L2 CoS value to use when mapping this DSCP to layer 2
CoS.ro QosLayer2Cos .1.3.6.1.4.1.9.18.2.1.3.1.1.3 |
qosCosToDscpTableMaps each of eight CoS values to a DSCP. When configured for
the first time, all 8 entries of the table must be
specified. Thereafter, instances may be modified (with a
delete and install in a single decision) but not deleted
unless all instances are deleted. SEQUENCE OF QosCosToDscpEntry .1.3.6.1.4.1.9.18.2.1.3.2 |
qosCosToDscpEntryAn instance of this class maps a CoS value to a DSCP. QosCosToDscpEntry .1.3.6.1.4.1.9.18.2.1.3.2.1 |
qosCosToDscpCosThe L2 CoS value that is being mapped. QosLayer2Cos .1.3.6.1.4.1.9.18.2.1.3.2.1.1 |
qosCosToDscpDscpThe DSCP value to use when mapping the L2 CoS to a DSCP.ro Dscp .1.3.6.1.4.1.9.18.2.1.3.2.1.2 |
qosUnmatchedPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.9.18.2.1.4 |
qosUnmatchedPolicyTableA policy class that specifies what QoS to apply to a packet
that does not match any other policy configured for this role
combination for a particular direction of traffic. SEQUENCE OF QosUnmatchedPolicyEntry .1.3.6.1.4.1.9.18.2.1.4.1 |
qosUnmatchedPolicyEntryAn instance of this class specifies the unmatched policy
for a particular role combination for incoming or outgoing
traffic. QosUnmatchedPolicyEntry .1.3.6.1.4.1.9.18.2.1.4.1.1 |
qosUnmatchedPolicyIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.4.1.1.1 |
qosUnmatchedPolicyRoleRole combination for which this instance applies.ro RoleCombination .1.3.6.1.4.1.9.18.2.1.4.1.1.2 |
qosUnmatchedPolicyDirectionThe direction of packet flow at the interface in question to
which this instance applies.ro Enumeration .1.3.6.1.4.1.9.18.2.1.4.1.1.3 |
qosUnmatchedPolicyDscpThe DSCP to classify the unmatched packet with. This must be
specified even if qosUnmatchedPolicyDscpTrusted is true.ro Dscp .1.3.6.1.4.1.9.18.2.1.4.1.1.4 |
qosUnmatchedPolicyDscpTrustedIf this attribute is true, then the Dscp associated with the
packet is trusted, i.e., it is assumed to have already been
set. In this case, the Dscp is not rewritten with
qosUnmatchedPolicyDscp (qosUnmatchedPolicyDscp is ignored)
unless this is a non-IP packet and arrives untagged. The
packet is still policed as part of its micro flow and its
aggregate flow.
When a trusted action is applied to an input interface, the
Dscp (for an IP packet) or CoS (for a non-IP packet)
associated with the packet is the one contained in the packet.
When a trusted action is applied to an output interface, the
Dscp associated with the packet is the one that is the result
of the input classification and policing.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.18.2.1.4.1.1.5 |
qosUnmatchPolMicroFlowPolicerIdAn index identifying the instance of policer to apply to
unmatched packets. It must correspond to the integer index of
an instance of class qosPolicerTable or be zero. If zero, the
microflow is not policed.ro PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.4.1.1.6 |
qosUnmatchedPolicyAggregateIdAn index identifying the aggregate that the packet belongs
to. It must correspond to the integer index of an instance of
class qosAggregateTable or be zero. If zero, the microflow
does not belong to any aggregate and is not policed as part of
any aggregate.ro PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.4.1.1.7 |
qosPolicer OBJECT IDENTIFIER .1.3.6.1.4.1.9.18.2.1.5 |
qosPolicerTableA class specifying policing parameters for both microflows
and aggregate flows. This table is designed for policing
according to a token bucket scheme where an average rate and
burst size is specified. SEQUENCE OF QosPolicerEntry .1.3.6.1.4.1.9.18.2.1.5.1 |
qosPolicerEntryAn instance of this class specifies a set of policing
parameters. QosPolicerEntry .1.3.6.1.4.1.9.18.2.1.5.1.1 |
qosPolicerIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.5.1.1.1 |
qosPolicerRateThe token rate. It is specified in units of bit/s. A rate of
zero means that all packets will be out of profile. If the
qosPolicerAction is set to drop then this effectively
denies any service to packets policed by this policer.ro Unsigned64 .1.3.6.1.4.1.9.18.2.1.5.1.1.2 |
qosPolicerNormalBurstThe normal size of a burst in terms of bits.ro Unsigned32 .1.3.6.1.4.1.9.18.2.1.5.1.1.3 |
qosPolicerExcessBurstThe excess size of a burst in terms of bits.ro Unsigned32 .1.3.6.1.4.1.9.18.2.1.5.1.1.4 |
qosPolicerActionAn indication of how to handle out of profile packets. When
the shape action is chosen then traffic is shaped to the rate
specified by qosPolicerRate.ro Enumeration .1.3.6.1.4.1.9.18.2.1.5.1.1.5 |
qosAggregateTableInstances of this class identify aggregate flows and the
policer to apply to each. SEQUENCE OF QosAggregateEntry .1.3.6.1.4.1.9.18.2.1.5.2 |
qosAggregateEntryAn instance of this class specifies the policer to apply to
an aggregate flow. QosAggregateEntry .1.3.6.1.4.1.9.18.2.1.5.2.1 |
qosAggregateIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.5.2.1.1 |
qosAggregatePolicerIdAn index identifying the instance of policer to apply to the
aggregate. It must correspond to the integer index of an
instance of class qosPolicerTable.ro PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.5.2.1.2 |
qosMacQos OBJECT IDENTIFIER .1.3.6.1.4.1.9.18.2.1.6 |
qosMacClassificationTableA class of MAC/Vlan tuples and their associated CoS values. SEQUENCE OF QosMacClassificationEntry .1.3.6.1.4.1.9.18.2.1.6.1 |
qosMacClassificationEntryAn instance of this class specifies the mapping of a VLAN
and a MAC address to a CoS value. QosMacClassificationEntry .1.3.6.1.4.1.9.18.2.1.6.1.1 |
qosMacClassificationIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.6.1.1.1 |
qosDstMacVlanThe VLAN of the destination MAC address of the L2 frame.ro INTEGER .1.3.6.1.4.1.9.18.2.1.6.1.1.2 |
qosDstMacAddressThe destination MAC address of the L2 frame.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.18.2.1.6.1.1.3 |
qosDstMacCosThe CoS to assign the packet with the associated MAC/VLAN
tuple. Note that this CoS is overridden by the policies to
classify the frame at layer 3 if there are any.ro QosLayer2Cos .1.3.6.1.4.1.9.18.2.1.6.1.1.4 |
qosIpQos OBJECT IDENTIFIER .1.3.6.1.4.1.9.18.2.1.7 |
qosIpAceTableACE definitions. SEQUENCE OF QosIpAceEntry .1.3.6.1.4.1.9.18.2.1.7.1 |
qosIpAceEntryAn instance of this class specifies an ACE. QosIpAceEntry .1.3.6.1.4.1.9.18.2.1.7.1.1 |
qosIpAceIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.7.1.1.1 |
qosIpAceDstAddrThe IP address to match against the packet's destination IP
address.ro IpAddress .1.3.6.1.4.1.9.18.2.1.7.1.1.2 |
qosIpAceDstAddrMaskA mask for the matching of the destination IP address.ro IpAddress .1.3.6.1.4.1.9.18.2.1.7.1.1.3 |
qosIpAceSrcAddrThe IP address to match against the packet's source IP
address.ro IpAddress .1.3.6.1.4.1.9.18.2.1.7.1.1.4 |
qosIpAceSrcAddrMaskA mask for the matching of the source IP address.ro IpAddress .1.3.6.1.4.1.9.18.2.1.7.1.1.5 |
qosIpAceDscpMinThe minimum value that the DSCP in the packet can have and
match this ACE.ro Dscp .1.3.6.1.4.1.9.18.2.1.7.1.1.6 |
qosIpAceDscpMaxThe maximum value that the DSCP in the packet can have and
match this ACE.ro Dscp .1.3.6.1.4.1.9.18.2.1.7.1.1.7 |
qosIpAceProtocolThe IP protocol to match against the packet's protocol.
A value of zero means match all.ro INTEGER .1.3.6.1.4.1.9.18.2.1.7.1.1.8 |
qosIpAceDstL4PortMinThe minimum value that the packet's layer 4 dest port number
can have and match this ACE.ro INTEGER .1.3.6.1.4.1.9.18.2.1.7.1.1.9 |
qosIpAceDstL4PortMaxThe maximum value that the packet's layer 4 dest port number
can have and match this ACE.ro INTEGER .1.3.6.1.4.1.9.18.2.1.7.1.1.10 |
qosIpAceSrcL4PortMinThe minimum value that the packet's layer 4 source port
number can have and match this ACE.ro INTEGER .1.3.6.1.4.1.9.18.2.1.7.1.1.11 |
qosIpAceSrcL4PortMaxThe maximum value that the packet's layer 4 source port
number can have and match this ACE.ro INTEGER .1.3.6.1.4.1.9.18.2.1.7.1.1.12 |
qosIpAcePermitIf the packet matches this ACE and the value of this attribute
is true, then the matching process terminates and the QoS
associated with this ACE (indirectly through the ACL) is
applied to the packet. If the value of this attribute is false,
then no more ACEs in this ACL are compared to this packet and
matching continues with the first ACE of the next ACL.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.18.2.1.7.1.1.13 |
qosIpAclDefinitionTableA class that defines a set of ACLs each being an ordered list
of ACEs. SEQUENCE OF QosIpAclDefinitionEntry .1.3.6.1.4.1.9.18.2.1.7.2 |
qosIpAclDefinitionEntryAn instance of this class specifies an ACE in an ACL and its
order with respect to other ACEs in the same ACL. QosIpAclDefinitionEntry .1.3.6.1.4.1.9.18.2.1.7.2.1 |
qosIpAclDefinitionIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.7.2.1.1 |
qosIpAclIdAn index for this ACL. There will be one instance of
policy class qosIpAclDefinition with this integer index for
each ACE in the ACL per role combination.ro PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.7.2.1.2 |
qosIpAceOrderAn integer that determines the position of this ACE in the ACL.
An ACE with a given order is positioned in the access contol
list before one with a higher order.ro Unsigned32 .1.3.6.1.4.1.9.18.2.1.7.2.1.3 |
qosIpAclDefAceIdThis attribute specifies the ACE in the qosIpAceTable that is
in the ACL specified by qosIpAclId at the position specified
by qosIpAceOrder.ro PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.7.2.1.4 |
qosIpAclActionTableA class that applies a set of ACLs to interfaces specifying,
for each interface the order of the ACL with respect to other
ACLs applied to the same interface and, for each ACL the
action to take for a packet that matches a permit ACE in that
ACL. Interfaces are specified abstractly in terms of
interface role combinations. SEQUENCE OF QosIpAclActionEntry .1.3.6.1.4.1.9.18.2.1.7.3 |
qosIpAclActionEntryAn instance of this class applies an ACL to traffic in a
particular direction on an interface with a particular role
combination, and specifies the action for packets which match
the ACL. QosIpAclActionEntry .1.3.6.1.4.1.9.18.2.1.7.3.1 |
qosIpAclActionIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.7.3.1.1 |
qosIpAclActAclIdThe ACL associated with this action.ro PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.7.3.1.2 |
qosIpAclInterfaceRolesThe interfaces to which this ACL applies specified in terms
of a set of roles.ro RoleCombination .1.3.6.1.4.1.9.18.2.1.7.3.1.3 |
qosIpAclInterfaceDirectionThe direction of packet flow at the interface in question to
which this ACL applies.ro Enumeration .1.3.6.1.4.1.9.18.2.1.7.3.1.4 |
qosIpAclOrderAn integer that determines the order of this ACL in the list
of ACLs applied to interfaces of the specified role
combination. An ACL with a given order is positioned in the
list before one with a higher order.ro Unsigned32 .1.3.6.1.4.1.9.18.2.1.7.3.1.5 |
qosIpAclDscpThe DSCP to classify the packet with in the event that the
packet matches an ACE in this ACL and the ACE is a permit.ro Dscp .1.3.6.1.4.1.9.18.2.1.7.3.1.6 |
qosIpAclDscpTrustedIf this attribute is true, then the Dscp associated with
the packet is trusted, i.e., it is assumed to have already
been set. In this case, the Dscp is not rewritten with
qosIpAclDscp (qosIpAclDscp is ignored). The packet is still
policed as part of its micro flow and its aggregate flow.
When a trusted action is applied to an input interface, the
Dscp associated with the packet is the one contained in the
packet. When a trusted action is applied to an output
interface, the Dscp associated with the packet is the one that
is the result of the input classification and policing.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.18.2.1.7.3.1.7 |
qosIpAclMicroFlowPolicerIdAn index identifying the instance of policer to apply to the
microflow. It must correspond to the integer index of an
instance of class qosPolicerTableor be zero. If zero, the
microflow is not policed.ro PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.7.3.1.8 |
qosIpAclAggregateIdAn index identifying the aggregate that the packet belongs
to. It must correspond to the integer index of an instance of
class qosAggregateTable or be zero. If zero, the microflow
does not belong to any aggregate and is not policed as part of
any aggregate.ro PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.7.3.1.9 |
qosIfParameters OBJECT IDENTIFIER .1.3.6.1.4.1.9.18.2.1.8 |
qosIfSchedulingPreferencesTableThis class specifies the scheduling preference an interface
chooses if it supports multiple scheduling types. Higher
values are preferred over lower values. SEQUENCE OF QosIfSchedulingPreferenceEntry .1.3.6.1.4.1.9.18.2.1.8.1 |
qosIfSchedulingPreferenceEntryAn instance of this class specifies a scheduling preference
for a queue-type on an interface with a particular role
combination. QosIfSchedulingPreferenceEntry .1.3.6.1.4.1.9.18.2.1.8.1.1 |
qosIfSchedulingPreferenceIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.8.1.1.1 |
qosIfSchedulingRolesThe combination of roles the interface must have for this
policy instance to apply to that interface.ro RoleCombination .1.3.6.1.4.1.9.18.2.1.8.1.1.2 |
qosIfSchedulingPreferenceThe preference to use this scheduling discipline and queue
type. A higher value means a higher preference. If two
disciplines have the same preference the choice is a local
decision.ro INTEGER .1.3.6.1.4.1.9.18.2.1.8.1.1.3 |
qosIfSchedulingDisciplineAn enumerate type for all the known scheduling disciplines.ro Enumeration .1.3.6.1.4.1.9.18.2.1.8.1.1.4 |
qosIfSchedulingQueueTypeThe queue type of this preference.ro QosInterfaceQueueType .1.3.6.1.4.1.9.18.2.1.8.1.1.5 |
qosIfDropPreferenceTableThis class specifies the preference of the drop mechanism an
interface chooses if it supports multiple drop mechanisms.
Higher values are preferred over lower values. SEQUENCE OF QosIfDropPreferenceEntry .1.3.6.1.4.1.9.18.2.1.8.2 |
qosIfDropPreferenceEntryAn instance of this class specifies a drop preference for
a drop mechanism on an interface with a particular role
combination. QosIfDropPreferenceEntry .1.3.6.1.4.1.9.18.2.1.8.2.1 |
qosIfDropPreferenceIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.8.2.1.1 |
qosIfDropRolesThe combination of roles the interface must have for this
policy instance to apply to that interface.ro RoleCombination .1.3.6.1.4.1.9.18.2.1.8.2.1.2 |
qosIfDropPreferenceThe preference to use this drop mechanism. A higher value
means a higher preference. If two mechanisms have the same
preference the choice is a local decision.ro INTEGER .1.3.6.1.4.1.9.18.2.1.8.2.1.3 |
qosIfDropDisciplineAn enumerate type for all the known drop mechanisms.ro Enumeration .1.3.6.1.4.1.9.18.2.1.8.2.1.4 |
qosIfDscpAssignmentTableThe assignment of each DSCP to a queue and threshold for each
interface queue type. SEQUENCE OF QosIfDscpAssignmentEntry .1.3.6.1.4.1.9.18.2.1.8.3 |
qosIfDscpAssignmentEntryAn instance of this class specifies the queue and threshold
set for a packet with a particular DSCP on an interface of
a particular type with a particular role combination. QosIfDscpAssignmentEntry .1.3.6.1.4.1.9.18.2.1.8.3.1 |
qosIfDscpAssignmentIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.8.3.1.1 |
qosIfDscpRolesThe role combination the interface must be configured with.ro RoleCombination .1.3.6.1.4.1.9.18.2.1.8.3.1.2 |
qosIfQueueTypeThe interface queue type to which this row applies.ro QosInterfaceQueueType .1.3.6.1.4.1.9.18.2.1.8.3.1.3 |
qosIfDscpThe DSCP to which this row applies.ro Dscp .1.3.6.1.4.1.9.18.2.1.8.3.1.4 |
qosIfQueueThe queue to which the DSCP applies for the given interface
type.ro INTEGER .1.3.6.1.4.1.9.18.2.1.8.3.1.5 |
qosIfThresholdSetThe threshold set of the specified queue to which the DSCP
applies for the given interface type.ro INTEGER .1.3.6.1.4.1.9.18.2.1.8.3.1.6 |
qosIfRedTableA class of lower and upper values for each threshold set in a
queue supporting WRED. If the size of the queue for a given
threshold is below the lower value then packets assigned to
that threshold are always accepted into the queue. If the
size of the queue is above upper value then packets are always
dropped. If the size of the queue is between the lower and
the upper then packets are randomly dropped. SEQUENCE OF QosIfRedEntry .1.3.6.1.4.1.9.18.2.1.8.4 |
qosIfRedEntryAn instance of this class specifies threshold limits for a
particular RED threshold of a given threshold set on an
interface and with a particular role combination. QosIfRedEntry .1.3.6.1.4.1.9.18.2.1.8.4.1 |
qosIfRedIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.8.4.1.1 |
qosIfRedRolesThe role combination the interface must be configured with.ro RoleCombination .1.3.6.1.4.1.9.18.2.1.8.4.1.2 |
qosIfRedNumThresholdSetsThe values in this entry apply only to queues with the number
of thresholds specified by this attribute.ro ThresholdSetRange .1.3.6.1.4.1.9.18.2.1.8.4.1.3 |
qosIfRedThresholdSetThe threshold set to which the lower and upper values apply.
It must be in the range 1 through qosIfRedNumThresholdSets.
There must be exactly one PRI for each value in this range.ro INTEGER .1.3.6.1.4.1.9.18.2.1.8.4.1.4 |
qosIfRedThresholdSetLowerThe threshold value below which no packets are dropped.ro Percent .1.3.6.1.4.1.9.18.2.1.8.4.1.5 |
qosIfRedThresholdSetUpperThe threshold value above which all packets are dropped.ro Percent .1.3.6.1.4.1.9.18.2.1.8.4.1.6 |
qosIfTailDropTableA class for threshold sets in a queue supporting tail drop.
If the size of the queue for a given threshold set is at or
below the specified value then packets assigned to that
threshold set are always accepted into the queue. If the size
of the queue is above the specified value then packets are
always dropped. SEQUENCE OF QosIfTailDropEntry .1.3.6.1.4.1.9.18.2.1.8.5 |
qosIfTailDropEntryAn instance of this class specifies the queue depth for a
particular tail-drop threshold set on an interface with a
particular role combination. QosIfTailDropEntry .1.3.6.1.4.1.9.18.2.1.8.5.1 |
qosIfTailDropIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.8.5.1.1 |
qosIfTailDropRolesThe role combination the interface must be configured with.ro RoleCombination .1.3.6.1.4.1.9.18.2.1.8.5.1.2 |
qosIfTailDropNumThresholdSetsThe value in this entry applies only to queues with the
number of thresholds specified by this attribute.ro ThresholdSetRange .1.3.6.1.4.1.9.18.2.1.8.5.1.3 |
qosIfTailDropThresholdSetThe threshold set to which the threshold value appliesro INTEGER .1.3.6.1.4.1.9.18.2.1.8.5.1.4 |
qosIfTailDropThresholdSetValueThe threshold value above which packets are dropped.ro Percent .1.3.6.1.4.1.9.18.2.1.8.5.1.5 |
qosIfWeightsTableA class of scheduling weights for each queue of an interface
that supports weighted round robin scheduling or a mix of
priority queueing and weighted round robin. For a queue with
N priority queues, the N highest queue numbers are the
priority queues with the highest queue number having the
highest priority. WRR is applied to the non-priority queues. SEQUENCE OF QosIfWeightsEntry .1.3.6.1.4.1.9.18.2.1.8.6 |
qosIfWeightsEntryAn instance of this class specifies the scheduling weight for
a particular queue of an interface with a particular number
of queues and with a particular role combination. QosIfWeightsEntry .1.3.6.1.4.1.9.18.2.1.8.6.1 |
qosIfWeightsIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.9.18.2.1.8.6.1.1 |
qosIfWeightsRolesThe role combination the interface must be configured with.ro RoleCombination .1.3.6.1.4.1.9.18.2.1.8.6.1.2 |
qosIfWeightsNumQueuesThe value of the weight in this instance applies only to
interfaces with the number of queues specified by this
attribute.ro QueueRange .1.3.6.1.4.1.9.18.2.1.8.6.1.3 |
qosIfWeightsQueueThe queue to which the weight applies.ro INTEGER .1.3.6.1.4.1.9.18.2.1.8.6.1.4 |
qosIfWeightsDrainSizeThe maximum number of bytes that may be drained from the
queue in one cycle. The percentage of the bandwith allocated
to this queue can be calculated from this attribute and the
sum of the drain sizes of all the non-priority queues of the
interface.ro Unsigned32 .1.3.6.1.4.1.9.18.2.1.8.6.1.5 |
qosIfWeightsQueueSizeThe size of the queue in bytes. Some devices set queue size
in terms of packets. These devices must calculate the queue
size in packets by assuming an average packet size suitable
for the particular interface.
Some devices have a fixed size buffer to be shared among all
queues. These devices must allocate a fraction of the
total buffer space to this queue calculated as the the ratio
of the queue size to the sum of the queue sizes for the
interface.ro Unsigned32 .1.3.6.1.4.1.9.18.2.1.8.6.1.6 |