CISCO-RTTMON-IP-EXT-MIB
AI MIB Summary
The CISCO-RTTMON-IP-EXT-MIB extends Cisco's RMON IP monitoring capabilities to support IPv6 address resolution, path tracing, and IP-layer performance metrics for Cisco IOS devices. It enables the collection of specific IP-layer statistics, including IPv6 neighbor discovery states and IP reachability data, within the RTTMON framework.
This MIB contains extensions to tables in CISCO-RTTMON-MIB to support IP-layer extensions, specifically IPv6 addresses and other information related to IPv6 and other IP information
Main OID:
ciscoRttMonIPExtMIB.1.3.6.1.4.1.9.9.572
54
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
ciscoRttMonIPExtMIBThis MIB contains extensions to tables in CISCO-RTTMON-MIB
to support IP-layer extensions, specifically IPv6 addresses
and other information related to IPv6 and other IP information MODULE-IDENTITY .1.3.6.1.4.1.9.9.572 |
crttMonIPExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.572.1 |
crttMonIPEchoAdminTableAn extension of the rttMonEchoAdminTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of recording the addresses as IPv6 addresses,
plus other IPv6 and IP layer extension information SEQUENCE OF CrttMonIPEchoAdminEntry .1.3.6.1.4.1.9.9.572.1.1 |
crttMonIPEchoAdminEntryA list of additional objects needed for IPv6 addresses. CrttMonIPEchoAdminEntry .1.3.6.1.4.1.9.9.572.1.1.1 |
crttMonIPEchoAdminTargetAddrTypeAn enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPEchoAdminTargetAddress
object as it identifies the address family of the
address specified by that object. If the value
of crttMonIPEchoAdminTargetAddress is a zero-length
string (e.g., because an IPv4 address is specified by
rttMonEchoAdminTargetAddress), this object contains
the value 'unknown'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.1.1.1 |
crttMonIPEchoAdminTargetAddressA string which specifies the address of the target.
This object, in conjunction with the
crttMonIPEchoAdminTargetAddrType object,
may be used to specify either an IPv6 or an IPv4 address and
is an alternative to the rttMonEchoAdminTargetAddress object,
which may only specify an IPv4 address. In case the target is
a V4 IP address then both crttMonIPEchoAdminTargetAddrType/
crttMonIPEchoAdminTargetAddress AND
rttMonEchoAdminTargetAddress may be used to specify it so long
as both try to specify the
same V4 IP address. Alternatively only one of
rttMonEchoAdminTargetAddress
OR crttMonIPEchoAdminTargetAddrType/
crttMonIPEchoAdminTargetAddress may be used to specify the
V4 IP address, in which case the other may either not be
instantiated or contain a zero length string.
In case the the target is a V6 IP address
then only crttMonIPEchoAdminTargetAddrType/
crttMonIPEchoAdminTargetAddress must be used and
rttMonEchoAdminTargetAddress may not be instantiated or
may have a zero length string.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.1.1.2 |
crttMonIPEchoAdminSourceAddrTypeAn enumerated value which specifies the address type
of the source.
This object must be used along with the
crttMonIPEchoAdminSourceAddress
object as it identifies the address family of the
address specified by that object. If the value
of crttMonIPEchoAdminSourceAddress is a zero-length
string (e.g., because an IPv4 address is specified by
rttMonEchoAdminSourceAddress), this object contains
the value 'unknown'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.1.1.3 |
crttMonIPEchoAdminSourceAddressA string which specifies the address of the target.
This object, together with the
crttMonIPEchoAdminSourceAddrType object,
may be used to specify either an IPv6 or an IPv4 address and
is an alternative to the rttMonEchoAdminSourceAddress
object, which
may only specify an IPv4 address. In case the target is a V4
IP address then both crttMonIPEchoAdminSourceAddrType/
crttMonIPEchoAdminSourceAddress AND
rttMonEchoAdminSourceAddress
may be used to specify it so long as both try to specify the
same V4 IP address. Alternatively only one of
rttMonEchoAdminSourceAddress
OR crttMonIPEchoAdminSourceAddrType/
crttMonIPEchoAdminSourceAddress may be used to specify the
V4 IP address, in which case the other may either not be
instantiated or contain a zero length string.
In case the the target is a V6 IP address
then only crttMonIPEchoAdminSourceAddrType/
crttMonIPEchoAdminSourceAddress must be used and
rttMonEchoAdminSourceAddress may not be instantiated or
may have a zero length string.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.1.1.4 |
crttMonIPEchoAdminNameServerAddrTypeAn enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPEchoAdminNameServerAddress
object as it identifies the address family of the
address specified by that object. If the value
of crttMonIPEchoAdminNameServerAddress is a zero-length
string (e.g., because an IPv4 address is specified by
rttMonEchoAdminNameServer), this object contains
the value 'unknown'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.1.1.5 |
crttMonIPEchoAdminNameServerAddressA string which specifies the address of the target. This object,
together with the crttMonIPEchoAdminNameServerAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the rttMonEchoAdminNameServer object, which
can only specify an IPv4. In case the target is a V4
IP address then both crttMonIPEchoAdminNameServerAddrType/
crttMonIPEchoAdminNameServerAddress AND
rttMonEchoAdminNameServer
may be used to specify it so long as both try to specify the
same V4 IP address. Alternatively only one of
rttMonEchoAdminNameServer
OR crttMonIPEchoAdminNameServerAddrType/
crttMonIPEchoAdminNameServerAddress may be used to specify the
V4 IP address, in which case the other may either not be
instantiated or contain a zero length string.
In case the the target is a V6 IP address
then only crttMonIPEchoAdminNameServerAddrType/
crttMonIPEchoAdminNameServerAddress must be used and
rttMonEchoAdminNameServer may not be instantiated or
may have a zero length string.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.1.1.6 |
crttMonIPEchoAdminLSPSelAddrTypeAn enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPEchoAdminLSPSelAddress
object as it identifies the address family of the
address specified by that object. If the value
of crttMonIPEchoAdminLSPSelAddress is a zero-length
string (e.g., because an IPv4 address is specified by
rttMonEchoAdminLSPSelector), this object contains
the value 'unknown'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.1.1.7 |
crttMonIPEchoAdminLSPSelAddressA string which specifies the address of the LSP Selector.
This object, in conjunction with the
crttMonIPEchoAdminLSPSelAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the rttMonEchoAdminLSPSelector object, which
can only specify an IPv4 address.In case the target is a V4
IP address then both crttMonIPEchoAdminLSPSelAddrType/
crttMonIPEchoAdminLSPSelAddress AND rttMonEchoAdminLSPSelector
may be used to specify it so long as both try to specify the
same V4 IP address. Alternatively only one of
rttMonEchoAdminLSPSelector
OR crttMonIPEchoAdminLSPSelAddrType/
crttMonIPEchoAdminLSPSelAddress may be used to specify the
V4 IP address, in which case the other may either not be
instantiated or contain a zero length string.
In case the the target is a V6 IP address
then only crttMonIPEchoAdminLSPSelAddrType/
crttMonIPEchoAdminLSPSelAddress must be used and
rttMonEchoAdminLSPSelector may not be instantiated or
may have a zero length string.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.1.1.8 |
crttMonIPEchoAdminDscpThe DSCP value (either an IPv4 TOS octet or an IPv6 Traffic
Class octet) to be set in outgoing packets.rw DscpOrAny (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.9.9.572.1.1.1.9 |
crttMonIPEchoAdminFlowLabelThe Flow Label in an IPv6 packet header.rw IPv6FlowLabelOrAny (IPV6-FLOW-LABEL-MIB) .1.3.6.1.4.1.9.9.572.1.1.1.10 |
crttMonIPLatestRttOperTableAn extension of the rttMonLatestRttOperTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying IPv6 addresses. SEQUENCE OF CrttMonIPLatestRttOperEntry .1.3.6.1.4.1.9.9.572.1.2 |
crttMonIPLatestRttOperEntryA list of objects required to support IPv6 addresses. CrttMonIPLatestRttOperEntry .1.3.6.1.4.1.9.9.572.1.2.1 |
crttMonIPLatestRttOperAddressTypeAn enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPLatestRttOperAddress
object as it identifies the address family of the
address specified by that object. If the value
of crttMonIPLatestRttOperAddress is a zero-length
string (e.g., because an IPv4 address is specified by
rttMonLatestRttOperAddress), this object contains
the value 'unknown'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.2.1.1 |
crttMonIPLatestRttOperAddressA string which specifies the address of the target. This object,
together with the crttMonIPLatestRttOperAddressType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the rttMonLatestRttOperAddress object, which
can only specify an IPv4 address. In case the target is a V4
IP address then both crttMonIPLatestRttOperAddressType/
crttMonIPLatestRttOperAddress AND rttMonLatestRttOperAddress
may be used to specify it so long as both try to specify the
same V4 IP address. Alternatively only one of
rttMonLatestRttOperAddress
OR crttMonIPLatestRttOperAddressType/
crttMonIPLatestRttOperAddress may be used to specify the
V4 IP address, in which case the other may either not be
instantiated or contain a zero length string.
In case the the target is a V6 IP address
then only crttMonIPLatestRttOperAddressType/
crttMonIPLatestRttOperAddress must be used and
rttMonLatestRttOperAddress may not be instantiated or
may have a zero length string.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.2.1.2 |
crttMonIPEchoPathAdminTableAn extension of the rttMonEchoPathAdminTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of recording the hops as IPv6 addresses. SEQUENCE OF CrttMonIPEchoPathAdminEntry .1.3.6.1.4.1.9.9.572.1.3 |
crttMonIPEchoPathAdminEntryA list of additional objects needed for IPv6 addresses. CrttMonIPEchoPathAdminEntry .1.3.6.1.4.1.9.9.572.1.3.1 |
crttMonIPEchoPathAdminHopAddrTypeAn enumerated value which specifies the address type
of the hop.
This object must be used along with the
crttMonIPEchoPathAdminHopAddress
object as it identifies the address family of the
address specified by that object. If the value
of crttMonIPEchoPathAdminHopAddress is a zero-length
string (e.g., because an IPv4 address is specified by
rttMonEchoPathAdminHopAddress), this object contains
the value 'unknown'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.3.1.1 |
crttMonIPEchoPathAdminHopAddressA string which specifies the address of the hop. This object,
together with the crttMonIPEchoPathAdminHopAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the
rttMonEchoPathAdminHopAddress object, which
can only specify an IPv4 address. In case the target is a V4
IP address then both crttMonIPEchoPathAdminHopAddrType/
crttMonIPEchoPathAdminHopAddress AND
rttMonEchoPathAdminHopAddress
may be used to specify it so long as both try to specify the
same V4 IP address. Alternatively only one of
rttMonEchoPathAdminHopAddress
OR crttMonIPEchoPathAdminHopAddrType/
crttMonIPEchoPathAdminHopAddress may be used to specify the
V4 IP address, in which case the other may either not be
instantiated or contain a zero length string.
In case the the target is a V6 IP address
then only crttMonIPEchoPathAdminHopAddrType/
crttMonIPEchoPathAdminHopAddress must be used and
rttMonEchoPathAdminHopAddress may not be instantiated or
may have a zero length string.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.3.1.2 |
crttMonIPStatsCollectTableAn extension of the rttMonStatsCollectTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying the collection address as an
IPv6 address. SEQUENCE OF CrttMonIPStatsCollectEntry .1.3.6.1.4.1.9.9.572.1.4 |
crttMonIPStatsCollectEntryA list of additional objects needed for IPv6 addresses. CrttMonIPStatsCollectEntry .1.3.6.1.4.1.9.9.572.1.4.1 |
crttMonIPStatsCollectAddressTypeAn enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPStatsCollectAddress
object as it identifies the address family of the
address specified by that object. If the value
of crttMonIPStatsCollectAddress is a zero-length
string (e.g., because an IPv4 address is specified by
rttMonStatsCollectAddress), this object contains
the value 'unknown'.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.4.1.1 |
crttMonIPStatsCollectAddressA string which specifies the address of the collection target.
This object, in conjunction with the
crttMonIPStatsCollectAddressType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the rttMonStatsCollectAddress object, which
can only specify an IPv4 address. In case the target is a V4
IP address then both crttMonIPStatsCollectAddressType/
crttMonIPStatsCollectAddress AND rttMonStatsCollectAddress
may be used to specify it so long as both try to specify the
same V4 IP address. Alternatively only one of
rttMonStatsCollectAddress
OR crttMonIPStatsCollectAddressType/
crttMonIPStatsCollectAddress may be used to specify the
V4 IP address, in which case the other may either not be
instantiated or contain a zero length string.
In case the the target is a V6 IP address
then only crttMonIPStatsCollectAddressType/
crttMonIPStatsCollectAddress must be used and
rttMonStatsCollectAddress may not be instantiated or
may have a zero length string.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.4.1.2 |
crttMonIPLpdGrpStatsTableAn extension of the rttMonLpdGrpStatsTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying the target PE address as an
IPv6 address. SEQUENCE OF CrttMonIPLpdGrpStatsEntry .1.3.6.1.4.1.9.9.572.1.5 |
crttMonIPLpdGrpStatsEntryA list of additional objects needed for IPv6 addresses. CrttMonIPLpdGrpStatsEntry .1.3.6.1.4.1.9.9.572.1.5.1 |
crttMonIPLpdGrpStatsTargetPEAddrTypeAn enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPLpdGrpStatsTargetPEAddr
object as it identifies the address family of the
address specified by that object. If the value
of crttMonIPLpdGrpStatsTargetPEAddr is a zero-length
string (e.g., because an IPv4 address is specified by
rttMonLpdGrpStatsTargetPE), this object contains
the value 'unknown'.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.5.1.1 |
crttMonIPLpdGrpStatsTargetPEAddrA string which specifies the address of the target PE.
This object, in conjunction with the
crttMonIPLpdGrpStatsTargetPEAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the rttMonLpdGrpStatsTargetPE object, which
can only specify an IPv4 address. In case the target is a V4
IP address then both crttMonIPLpdGrpStatsTargetPEAddrType/
crttMonIPLpdGrpStatsTargetPEAddr AND rttMonLpdGrpStatsTargetPE
may be used to specify it so long as both try to specify the
same V4 IP address. Alternatively only one of
rttMonLpdGrpStatsTargetPE
OR crttMonIPLpdGrpStatsTargetPEAddrType/
crttMonIPLpdGrpStatsTargetPEAddr may be used to specify the
V4 IP address, in which case the other may either not be
instantiated or contain a zero length string.
In case the the target is a V6 IP address
then only crttMonIPLpdGrpStatsTargetPEAddrType/
crttMonIPLpdGrpStatsTargetPEAddr must be used and
rttMonLpdGrpStatsTargetPE may not be instantiated or
may have a zero length string.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.5.1.2 |
crttMonIPHistoryCollectionTableAn extension of the rttMonHistoryCollectionTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying the target address as an
IPv6 address. SEQUENCE OF CrttMonIPHistoryCollectionEntry .1.3.6.1.4.1.9.9.572.1.6 |
crttMonIPHistoryCollectionEntryA list of additional objects needed for IPv6 addresses. CrttMonIPHistoryCollectionEntry .1.3.6.1.4.1.9.9.572.1.6.1 |
crttMonIPHistoryCollectionAddrTypeAn enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPHistoryCollectionAddress
object as it identifies the address family of the
address specified by that object. If the value
of crttMonIPHistoryCollectionAddress is a zero-length
string (e.g., because an IPv4 address is specified by
rttMonHistoryCollectionAddress), this object contains
the value 'unknown'.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.6.1.1 |
crttMonIPHistoryCollectionAddressA string which specifies the address of the target.
This object, in conjunction with the
crttMonIPHistoryCollectionAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the
rttMonHistoryCollectionAddress object, which
can only specify an IPv4 address. In case the target is a V4
IP address then both crttMonIPHistoryCollectionAddrType/
crttMonIPHistoryCollectionAddress AND
rttMonHistoryCollectionAddress
may be used to specify it so long as both try to specify the
same V4 IP address. Alternatively only one of
rttMonHistoryCollectionAddress
OR crttMonIPHistoryCollectionAddrType/
crttMonIPHistoryCollectionAddress may be used to specify the
V4 IP address, in which case the other may either not be
instantiated or contain a zero length string.
In case the the target is a V6 IP address
then only crttMonIPHistoryCollectionAddrType/
crttMonIPHistoryCollectionAddress must be used and
rttMonHistoryCollectionAddress may not be instantiated or
may have a zero length string.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.572.1.6.1.2 |
cipslaPercentileConfigTableA table that contains percentile configurations. Each
conceptual row corresponds to the percentile
configuration for the probe defined in rttMonCtrlAdminTable. SEQUENCE OF CipslaPercentileConfigEntry .1.3.6.1.4.1.9.9.572.1.7 |
cipslaPercentileConfigEntryA list of objects that define a conceptual percentile
configuration control row. CipslaPercentileConfigEntry .1.3.6.1.4.1.9.9.572.1.7.1 |
cipslaPercentileRTTSpecifies the percentile value to use in percentile
RTT calculations.
ex. A 90% level will discard the highest 10% of all RTT values
when calculating average RTT, max RTT, etc.rw Integer32 .1.3.6.1.4.1.9.9.572.1.7.1.1 |
cipslaPercentileOWSDSpecifies the percentile value to use in percentile
one-way source to destination delay calculations.
ex. A 90% level will discard the highest 10% of all
one-way source to destination values when calculating
average, max, etc.ro Integer32 .1.3.6.1.4.1.9.9.572.1.7.1.2 |
cipslaPercentileOWDSSpecifies the percentile value to use in percentile
one-way destination to source delay calculations.
ex. A 90% level will discard the highest 10% of all
one-way destination to source values when calculating
average, max, etc.rw Integer32 .1.3.6.1.4.1.9.9.572.1.7.1.3 |
cipslaPercentileJitterSDSpecifies the percentile value to use in percentile
one-way source to destination jitter calculations.
ex. A 90% level will discard the highest 10% of all
one-way source to destination jitter values when calculating
average, max, etc.rw Integer32 .1.3.6.1.4.1.9.9.572.1.7.1.4 |
cipslaPercentileJitterDSSpecifies the percentile value to use in percentile
one-way destination to source jitter calculations.
ex. A 90% level will discard the highest 10% of all
one-way destination to source jitter values when calculating
average, max, etc.rw Integer32 .1.3.6.1.4.1.9.9.572.1.7.1.5 |
cipslaPercentileJitterAvgSpecifies the percentile value to use in percentile
average jitter calculations.
ex. A 90% level will discard the highest 10% of all
jitter values in both directions when calculating average,
max, etc.rw Integer32 .1.3.6.1.4.1.9.9.572.1.7.1.6 |
cipslaPercentileLatestStatsTableA table that contains percentile statistics. Each
conceptual row corresponds to a percentile configuration
for the probe defined in cipslaPercentileConfigTable.
For each percentile configuration for a probe there is an entry
in
the table.
Each Probe can have multiple percentile configurations and
hence
there can be multiple rows for a particular probe. SEQUENCE OF CipslaPercentileLatestStatsEntry .1.3.6.1.4.1.9.9.572.1.8 |
cipslaPercentileLatestStatsEntryA collection of objects that record the latest jitter
operation.
An entry is created only when the following
objects are valid and when the given percentile
type is configured to a non-default value.
- rttMonCtrlAdminRttType
- rttMonEchoAdminProtocol
The entry will start to collect data when rttMonCtrlAdminStatus
is in 'active' state. The entry will be removed when the
rttMonCtrlAdminStatus is changed to 'destroy' state. CipslaPercentileLatestStatsEntry .1.3.6.1.4.1.9.9.572.1.8.1 |
cipslaPercentileTypeVarThis object specifies the type of percentile statistic
configured for a probe.
The percentile stat types 'rtt', 'owsd', 'owds', 'jittersd',
'jitterds' and 'jitteravg' may be configured for UDP jitter,
ICMP jitter, and Ethernet jitter probe types. CipslaPercentileVar { rtt(1), owsd(2), owds(3), jittersd(4), jitterds(5), jitteravg(6) } .1.3.6.1.4.1.9.9.572.1.8.1.1 |
cipslaPercentileLatestMaxThe maximum time of all retained samples.ro Gauge32 .1.3.6.1.4.1.9.9.572.1.8.1.2 |
cipslaPercentileLatestMinThe minimum time of all retained samples.ro Gauge32 .1.3.6.1.4.1.9.9.572.1.8.1.3 |
cipslaPercentileLatestAvgThe average time of all retained samples.ro Gauge32 .1.3.6.1.4.1.9.9.572.1.8.1.4 |
cipslaPercentileLatestNumThe number of retained samples.ro Gauge32 UNITS "packets" .1.3.6.1.4.1.9.9.572.1.8.1.5 |
cipslaPercentileLatestSumThe sum of times of retained samples.ro Gauge32 .1.3.6.1.4.1.9.9.572.1.8.1.6 |
cipslaPercentileLatestSum2The sum of squares of times of retained samples.ro Gauge32 .1.3.6.1.4.1.9.9.572.1.8.1.7 |
ciscoRttMonIPExtMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.572.2 |
ciscoRttMonIPExtMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.572.2.1 |
ciscoRttMonIPExtMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.572.2.2 |