Home/Catalog/CISCO-RTTMON-TC-MIB

CISCO-RTTMON-TC-MIB

AI MIB Summary

The CISCO-RTTMON-TC-MIB module defines standardized textual conventions for Cisco Service Assurance Agent (SAA) operations, specifically supporting Round Trip Time (RTT), MPLS Label Switched Path (LSP), and Connection Fault Management (CFM) metrics across Cisco IOS and IOS-XE platforms. These definitions enable the precise encoding of performance data for ICMP, RTP, and MPLS traffic analysis within the broader RTTMON management framework.

This MIB contains textual conventions used by CISCO-RTTMON-MIB, CISCO-RTTMON-RTP-MIB and CISCO-RTTMON-ICMP-MIB, but they are not limited to only these MIBs. These textual conventions were originally defined in CISCO-RTTMON-MIB. Acronyms: FEC: Forward Equivalence Class LPD: Label Path Discovery LSP: Label Switched Path MPLS: Multi Protocol Label Switching RTT: Round Trip Time SAA: Service Assurance Agent VPN: Virtual Private Network CFM: Connection Fault Management
Main OID:
ciscoRttMonTCMIB.1.3.6.1.4.1.9.9.485
1
Objects
Active
Status
3
Dependencies

Imported Objects

Objects

1 total
Object Name
ciscoRttMonTCMIB
MODULE-IDENTITY
.1.3.6.1.4.1.9.9.485

CISCO-RTTMON-TC-MIB Technical Reference Overview

The CISCO-RTTMON-TC-MIB SNMP MIB module published by Cisco defines 1 managed OID objects, including 0 scalar/column metrics, 0 SNMP tables, and 0 trap/notification events anchored at base OID .1.3.6.1.4.1.9.9.485.

Key OID Definitions in CISCO-RTTMON-TC-MIB

ciscoRttMonTCMIBMODULE-IDENTITYnot-accessible
.1.3.6.1.4.1.9.9.485

This MIB contains textual conventions used by CISCO-RTTMON-MIB, CISCO-RTTMON-RTP-MIB and CISCO-RTTMON-ICMP-MIB, but they are not limited to only these MIBs. These textual conventions were originally defined in CISCO-RTTMON-MIB. Acronyms: FEC: Forward Equivalence Class LPD: Label Path Discovery LSP: Label Switched Path MPLS: Multi Protocol Label Switching RTT: Round Trip Time SAA: Service Assurance Agent VPN: Virtual Private Network CFM: Connection Fault Management

More MIBs from Cisco

Browse all CiscoMIBs →
CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

The CISCO-UNIFIED-COMPUTING-COMPUTE-MIB provides SNMP-based monitoring and management of Cisco UCS compute blades, servers, and chassis components, exposing critical metrics such as CPU utilization, memory usage, thermal sensor readings, power supply status, and interface operational states. This module enables granular visibility into the health and performance of the Cisco Unified Computing System's compute subsystems for capacity planning and fault isolation.

1401 objects→
CISCO-UNIFIED-COMPUTING-STORAGE-MIB

The CISCO-UNIFIED-COMPUTING-STORAGE-MIB facilitates SNMP-based monitoring and management of storage subsystems, including Fibre Channel and iSCSI interfaces, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers. It exposes critical operational metrics such as port status, error counters, throughput statistics, and storage controller health states to enable granular visibility into the storage infrastructure.

1295 objects→
CISCO-UNIFIED-COMPUTING-VNIC-MIB

The CISCO-UNIFIED-COMPUTING-VNIC-MIB enables SNMP-based monitoring and management of Virtual Network Interface Card (vNIC) attributes, including operational status, traffic counters, and binding configurations, within the Cisco Unified Computing System (UCS) fabric interconnects and server blades.

1161 objects→
CERENT-GENERIC-MIB

SNMP MIB module

984 objects→
CISCO-UNIFIED-COMPUTING-BIOS-MIB

The CISCO-UNIFIED-COMPUTING-BIOS-MIB enables SNMP-based monitoring and configuration of BIOS-level parameters, firmware versions, and hardware initialization states within Cisco Unified Computing System (UCS) servers. It provides visibility into critical server boot diagnostics, BIOS settings, and hardware readiness indicators to facilitate low-level infrastructure management and troubleshooting.

937 objects→
CISCO-UNIFIED-COMPUTING-ETHER-MIB

The CISCO-UNIFIED-COMPUTING-ETHER-MIB provides SNMP management interfaces for monitoring Ethernet interface statistics, link states, and error counters on Cisco Unified Computing System (UCS) fabric interconnects and blade server line cards. This module enables the tracking of physical layer connectivity, port throughput, and packet error rates within the UCS Ethernet switching infrastructure.

920 objects→