CISCO-MOBILITY-TAP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CISCO-MOBILITY-TAP-MIB.
25
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
25 total| Object Name |
|---|
ciscoMobilityTapMIB OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672 |
CISCO-SMI Unknown .1.3.6.1.4.1.9.9.672 |
ciscoMobilityTapMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672.0 |
ciscoMobilityTapMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672.1 |
cmtapStreamGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672.1.1 |
cmtapStreamCapabilitiesThis object indicates the Mobility Gateway intercept
features that are implemented by this device and are
manageable through this MIB.
tapEnable: set if table entries with
cTap2StreamInterceptEnable set to
'false' are used to pre-screen packets
for intercept; otherwise these entries
are ignored.
interface: SNMP ifIndex Value may be used to
select interception of all data
crossing an interface or set of
interfaces.
nonvolatileStorage: The cmTapStreamTable supports the
ability to store rows in nonvolatile
memory.
calledSubscriberID: The cmtapStreamCalledSubscriberID can
be used to specify intercepts.
Otherwise, this field is disabled.
msid: A Mobile Subscriber Identity (MSID) can
be used in the ID strings to specify
intercepts.
imsi: An International Mobile Subscriber
Identity (IMSI) number can be used ID
strings to specify intercepts.
nai: A Network Access Identifier (NAI) can
be used in the ID strings to specify
intercepts.
esn: An Electronic Serial Number (ESN) can
be used in the ID strings to specify
intercepts.
servedMdn: Vendor specific attribute Served-Mobile Directory
Number(MDN) can be used in the ID strings
to specify intercepts.ro OCTET STRING .1.3.6.1.4.1.9.9.672.1.1.1 |
cmtapStreamTableThe Mobility Stream Table lists the data streams to be
intercepted. The same data stream may be required by multiple
taps.
This essentially provides options for packet selection, only
some of which might be used. For example, if all the traffic to
or from a subscriber is to be intercepted, one would configure
an entry listing SubscriberID along with the SubscriberIDType
corresponding to the stream that one wishes to intercept.
The first index indicates which Mediation Device the
intercepted traffic will be diverted to. The second index,
which indicates the specific intercept stream, permits multiple
classifiers to be used together. For example, an IP stream
and a Mobility stream could both be listed in their respective
tables, yet still correspond to the same Mediation Device
entry.
Entries are added to this table via cmtapStreamStatus in
accordance with the RowStatus convention. SEQUENCE OF CmtapStreamEntry .1.3.6.1.4.1.9.9.672.1.1.2 |
cmtapStreamEntryA stream entry indicates a single data stream to be
intercepted to a Mediation Device. Many selected data
streams may go to the same application interface and many
application interfaces are supported. CmtapStreamEntry .1.3.6.1.4.1.9.9.672.1.1.2.1 |
cmtapStreamCalledSubscriberIDTypeIdentifies the type of address that is stored in the
cmtapStreamCalledSubscriberID string.rw CmtapSubscriberIDType -- Rsyntax INTEGER { -- unknown(1), -- msid(2), -- imsi(3), -- nai(4), -- esn(5), -- servedMdn(6) -- } .1.3.6.1.4.1.9.9.672.1.1.2.1.1 |
cmtapStreamCalledSubscriberIDA string used to identify the party being contacted.
The type of this identification is determined by the
cmtapStreamCalledSubscriberIDType object.rw CmtapSubscriberID -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.9.672.1.1.2.1.2 |
cmtapStreamSubscriberIDTypeIdentifies the type of address that is stored in the
cmtapStreamSubscriberID string.rw CmtapSubscriberIDType -- Rsyntax INTEGER { -- unknown(1), -- msid(2), -- imsi(3), -- nai(4), -- esn(5), -- servedMdn(6) -- } .1.3.6.1.4.1.9.9.672.1.1.2.1.3 |
cmtapStreamSubscriberIDA string used to identify the subscriber to tap.
The type of this indentification is determined by the
cmtapStreamSubscriberIDType object.rw CmtapSubscriberID -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.9.672.1.1.2.1.4 |
cmtapStreamStorageTypeThis object specifies the storage type of this conceptual row.
If it is set to 'nonVolatile', this entry can be saved into
non-volatile memory.rw StorageType -- Rsyntax INTEGER { -- other(1), -- volatile(2), -- nonVolatile(3), -- permanent(4), -- readOnly(5) -- } .1.3.6.1.4.1.9.9.672.1.1.2.1.5 |
cmtapStreamStatusThe status of this conceptual row. This object manages
creation, modification, and deletion of rows in this table.
When any field must be changed, cmtapStreamStatus must be
first set to 'notInService'.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.9.9.672.1.1.2.1.6 |
cmtapStreamLIIdentifierThis object is an identifier assigned by a Law Enforcement
Agency (LEA) to facilitate LI operations as defined in 3GPP TS
33.108 v8.7.0 standards document.rw CmtapLawfulInterceptID -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.9.672.1.1.2.1.7 |
cmtapStreamLocationInfoThis object indicates, if the userLocationInfo object should be
included in the Intercept Related Information (IRI) messages
sent by the gateway to mediation gateway(s) for interception
taps.
The userLocationInfo is defined as part of the IRI messages in
3GPP 33.108 v8.7.0 standards document.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.9.672.1.1.2.1.8 |
cmtapStreamInterceptTypeThis object indicates the intercept type of the tapped stream.
The tap can be provisioned to intercept control messages (IRI)
from the tapped stream, the payload (CC) messages from the
tapped stream or both. The format of these messages in defined
in 3GPP TS 33.108 v8.7.0 standards document.
ccOnly(1) - Content of communication interception only.
iriOnly(2) - Intercept Related Information only.
both(3) - Intercept both: CC and IRI.rw Enumeration .1.3.6.1.4.1.9.9.672.1.1.2.1.9 |
ciscoMobilityTapMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672.2 |
ciscoMobilityTapMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672.2.1 |
ciscoMobilityTapMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672.2.1.1 |
ciscoMobilityTapMIBComplianceRev01 OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672.2.1.2 |
ciscoMobilityTapMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672.2.2 |
ciscoMobilityTapCapabilityGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672.2.2.1 |
ciscoMobilityTapStreamGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672.2.2.2 |
ciscoMobilityTapStreamGroupSup1 OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.672.2.2.3 |