CISCO-MEDIA-QUALITY-MIB
AI MIB Summary
The CISCO-MEDIA-QUALITY-MIB monitors Cisco telephony and VoIP call legs to retrieve real-time voice and video quality statistics, specifically tracking Mean Opinion Score (MOS), Acoustic Shock Protection (ASP), Noise Reduction (NR), and Time-Division Multiplexing (TDM) parameters. This module extends DIAL-CONTROL-MIB capabilities to provide granular performance data for diagnosing call leg degradation and ensuring service quality across IP-based voice networks.
This MIB module enhances the DIAL-CONTROL-MIB (RFC2128) by providing call information and voice and video quality statistics of call legs over a telephony and voice over IP network.
*** ABBREVIATIONS, ACRONYMS AND SYMBOLS ***
ASP - Acoustic Shock Protection MIC - Microphone MOS - Mean Opinion Score NR - Noise Reduction TDM - Time-Division Multiplexing VOIP - Voice Over IP
Main OID:
ciscoMediaQualityMIB.1.3.6.1.4.1.9.9.769
210
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
210 total| Object Name |
|---|
ciscoMediaQualityMIBThis MIB module enhances the DIAL-CONTROL-MIB
(RFC2128) by providing call information and voice
and video quality statistics of call legs over a
telephony and voice over IP network.
*** ABBREVIATIONS, ACRONYMS AND SYMBOLS ***
ASP - Acoustic Shock Protection
MIC - Microphone
MOS - Mean Opinion Score
NR - Noise Reduction
TDM - Time-Division Multiplexing
VOIP - Voice Over IP MODULE-IDENTITY .1.3.6.1.4.1.9.9.769 |
ciscoMediaQualityMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.769.0 |
ciscoMediaQualityMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.769.1 |
cmqVoiceCallActive OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.769.1.1 |
cmqVoIPCallActiveTableThis table is the VoIP extension to the callActiveTable of
DIAL-CONTROL-MIB. It contains voice quality information
and statistics for the VoIP call leg. SEQUENCE OF CmqVoIPCallActiveEntry .1.3.6.1.4.1.9.9.769.1.1.1 |
cmqVoIPCallActiveEntryAn entry (conceptual row) in the cmqVoIPCallActiveTable.
An entry into this table is created when its associated call
active entry in the DIAL-CONTROL-MIB is created which has
corresponding callActiveInfoType equals to 'speech'.
The entry is deleted when its associated call active entry in
the DIAL-CONTROL-MIB is deleted. CmqVoIPCallActiveEntry .1.3.6.1.4.1.9.9.769.1.1.1.1 |
cmqVoIPCallActiveConnectionIdThe global connection identifier for the active VoIP leg of the
call.ro CvcGUid (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.1.1.1.1 |
cmqVoIPCallActiveCallReferenceIdThe call reference ID associates the video call entry and voice
call entry of the same endpoint. An audio-only call with a call
reference ID of zero will not have a video call entry associated
with it, although an audio-only call can also have a reference
ID greater than zero.ro CvcCallReferenceIdOrZero (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.1.1.1.2 |
cmqVoIPCallActiveRxCodecIdThe codec type of the endpoint for the established
voice path.ro CvcCoderTypeRate (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.1.1.1.3 |
cmqVoIPCallActiveRxSevConcealRatioPctThe ratio of severely concealed seconds to the sum of
unimpaired seconds and concealed seconds.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.1.1.1.4 |
cmqVoIPCallActiveRxCallConcealRatioPctThe ratio of the recent concealment time to recent talk-mode
time interval. The talk-mode interval is 3 seconds.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.1.1.1.5 |
cmqVoIPCallActiveRxPktLossRatioPctThe ratio of total effective received packet loss to the number
of RTP packets expected.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.1.1.1.6 |
cmqVoIPCallActiveRxRoundTripTimeThe round-trip delay is the sum of measured network delay plus
transmit and receive endpoint processing delays.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.7 |
cmqVoIPCallActiveRxCallDurDuration of receive path open from this peer to voice gateway
for the call leg.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.8 |
cmqVoIPCallActiveRxVoiceDurDuration of speech received from this peer to voice gateway for
the call leg.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.9 |
cmqVoIPCallActiveRxPktLossConcealDurThe sum of error predictive concealment and bad protocol
concealment in milliseconds.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.10 |
cmqVoIPCallActiveRxPktCntExpectedThe expected number of packets to be received.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.1.1.1.11 |
cmqVoIPCallActiveRxPktCntNotArrivedThe expected number of packets minus the number of received
packets.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.1.1.1.12 |
cmqVoIPCallActiveRxPktCntComfortNoiseThe number of received comfort noise packets for the
call leg.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.1.1.1.13 |
cmqVoIPCallActiveRxPktCntUnusableLateThe number of received voice packets that arrived too late to
playout with CODEC (Coder/Decoder) during the call.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.1.1.1.14 |
cmqVoIPCallActiveRxPktCntDiscardedThe sum of the number of late packets and the number of bad
protocol packets.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.1.1.1.15 |
cmqVoIPCallActiveRxPktCntEffLossThe total number of never-arrived packets and the number of
discarded packets.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.1.1.1.16 |
cmqVoIPCallActiveRxUnimpairedSecOKThe cumulative number of seconds during which there was no
concealment and is considered as OK seconds.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.17 |
cmqVoIPCallActiveRxConcealSecThe cumulative number of seconds during which there was some
concealment.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.18 |
cmqVoIPCallActiveRxSevConcealSecThe total number of seconds that are severely concealed from
the start of the voice stream. A severly concealed second has
more than 50ms of concealment.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.19 |
cmqVoIPCallActiveRxJBufModeThe jitter buffer mode configured for the endpoint.
adaptive (1): an adaptive size algorithm for jitter buffer,
fixed (2): a fixed size algorithm for jitter buffer,
unknown (3): an unknown size algorithm for jitter buffer,
disabled (4): no jitter buffer is configured.ro Enumeration .1.3.6.1.4.1.9.9.769.1.1.1.1.20 |
cmqVoIPCallActiveRxJBufNomDelayThe nominal jitter buffer playout delay in milliseconds
configured for the endpoint.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.21 |
cmqVoIPCallActiveRxJBufDlyNowThe playout delay buffer in milliseconds to accommodate
interarrival jitter. The interarrival jitter is the network
arrival jitter between consecutive frames measured at the
receiver.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.22 |
cmqVoIPCallActiveRxJBufLowWaterThe minimum jitter buffer playout delay in milliseconds
configured for the endpoint.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.23 |
cmqVoIPCallActiveRxJBuffHiWaterThe maximum jitter buffer playout delay in milliseconds
configured for the endpoint.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.24 |
cmqVoIPCallActive3550JShortTermAvgThe instantaneous RFC3550 playout delay buffer in milliseconds
to accommodate packet jitter.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.25 |
cmqVoIPCallActive3550JCallAvgThe long-term average of multiple RFC3550 playout delay buffer
in milliseconds to accommodate packet jitter.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.26 |
cmqVoIPCallActiveRxSignalLvlThe instantaneous input signal level to the telephony
interface (TDM to IP network) that is used by the call leg.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.1.1.1.27 |
cmqVoIPCallActiveRxPred107RscoreThe R-factor based MOS Listening Quality, which is listening
quality minus clarity only, with no delay component. A value of
0 indicates an invalid score and a positive value indicates a
valid score.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.1.1.28 |
cmqVoIPCallActiveRxPred107RMosListenThe MOS Listening Quality Estimate is computed on a running
basis with a new value every 10 seconds of received speech. A
value of 0 indicates an invalid score and a positive value
indicates a valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.1.1.1.29 |
cmqVoIPCallActiveRxPred107RScoreConvThe R-factor based MOS Conversation Quality, which is based on
loss plus absolute delay. A value of 0 indicates an invalid
score and a positive value indicates a valid score.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.1.1.30 |
cmqVoIPCallActiveRxPred107RMosConvTh MOS Conversation Quality Estimate is computed on a running
basis with a new value every 10 seconds of received speech. A
value of 0 indicates an invalid score and a positive value
indicates a valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.1.1.1.31 |
cmqVoIPCallActiveRxPred107CodecIeBaseThe base Ie score is a factor to calculate IeEff value. It is
obtained from G.113 table according to the codec type and is
defined in kilobits per second.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.1.1.32 |
cmqVoIPCallActiveRxPred107CodecBPLThe bpl is a factor to calculate IeEff value. It is obtained
from G.113 table according to the codec type and is defined in
kilobits per second.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.1.1.33 |
cmqVoIPCallActiveRxPred107DefaultR0R0 is a factor based on signal-to-noise ratio which also
includes loudness ratings.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.1.1.34 |
cmqVoIPCallActiveRxPred107IeEffIe-eff is one of the components to contribute to MOS R-factor
calculations, where R-factor is based on ITU-T G.107. Ie is a
component which depends on the real-time packet loss, where as
Ie-eff stands for equipment impairment factor which includes
codec type and packet loss.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.1.1.35 |
cmqVoIPCallActiveRxPred107IddIdd is one of the components to contribute to MOS R-factor
calculations, where R-factor is based on ITU-T G.107. Idd is a
delay impairment factor which depends on the real-time round
trip delay and echo.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.1.1.36 |
cmqVoIPCallActiveRxPredMosLqoAvgThe statistical average MOS score of all the previous
instantaneous values. A value of 0 indicates an invalid score
and a positive value indicates a valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.1.1.1.37 |
cmqVoIPCallActiveRxPredMosLqoRecentThe most recent MOS score with K-factor input based on frame
loss and codec. A value of 0 indicates an invalid score and a
positive value indicates a valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.1.1.1.38 |
cmqVoIPCallActiveRxPredMosLqoBaselineThe maximum or codec zero-impairment baseline MOS score of all
the previous instantaneous values. A value of 0 indicates an
invalid score and a positive value indicates a valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.1.1.1.39 |
cmqVoIPCallActiveRxPredMosLqoMinThe statistical minimum MOS score of all the previous
instantaneous values. A value of 0 indicates an invalid score
and a positive value indicates a valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.1.1.1.40 |
cmqVoIPCallActiveRxPredMosLqoNumWinA window in 8 seconds of frame loss data required to calculate
the MOS estimate.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.1.1.41 |
cmqVoIPCallActiveRxPredMosLqoBurstsThe MOS score calculated with K-factor input of consecutive
frame loss events, or error bursts. A value of 0 indicates an
invalid score and a positive value indicates a valid score.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.1.1.42 |
cmqVoIPCallActiveRxPredMosLqoFrLossThe average frame loss count since call start.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.1.1.43 |
cmqVoIPCallActiveRxPredMosLqoVerIDThe MOS K-factor version ID, e.g. CVTQ v0.95ro SnmpAdminString .1.3.6.1.4.1.9.9.769.1.1.1.1.44 |
cmqVoIPCallActiveTxCodecIdThe codec type of the endpoint for the established
voice path.ro CvcCoderTypeRate (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.1.1.1.45 |
cmqVoIPCallActiveTxVadEnabledThis flag indicates whether VAD (Voice Activation Detector)
is enabled or disabled. A value of 'true' indicates enabled and
a value of 'false' indicates disabled. Default is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.769.1.1.1.1.46 |
cmqVoIPCallActiveTxTmrCallDurDuration of transmit path open from this peer to voice gateway
for the call leg.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.47 |
cmqVoIPCallActiveTxTmrActSpeechDurDuration of speech transmitted from this peer to voice gateway
for the call leg.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.1.1.48 |
cmqVoIPCallActiveTxSignalLvlThe instantaneous output signal level from the telephony
interface (TDM to IP network) that is used by the call leg.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.1.1.1.49 |
cmqVoIPCallActiveTxNoiseFloorThe instantaneous noise floor level estimate if VAD is
enabled.ro Integer32 .1.3.6.1.4.1.9.9.769.1.1.1.1.50 |
cmqCommonCallActiveNRTableThis table is the voice and VoIP extension to the
callActiveTable of DIAL-CONTROL-MIB. It contains voice quality
information and statistics when noise reduction is applied to
the call leg. SEQUENCE OF CmqCommonCallActiveNREntry .1.3.6.1.4.1.9.9.769.1.1.2 |
cmqCommonCallActiveNREntryAn entry (conceptual row) in the cmqCommonCallActiveNRTable.
An entry into this table is created when its associated call
active entry in the DIAL-CONTROL-MIB is created which has
corresponding callActiveInfoType equals to 'speech'.
The entry is deleted when its associated call active entry in
the DIAL-CONTROL-MIB is deleted. CmqCommonCallActiveNREntry .1.3.6.1.4.1.9.9.769.1.1.2.1 |
cmqCommonCallActiveNRConnectionIdThe global connection identifier for the active leg of the
call.ro CvcGUid (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.1.2.1.1 |
cmqCommonCallActiveNRCallReferenceIdThe call reference ID associates the video call entry and voice
call entry of the same endpoint. An audio-only call with a
call reference ID of zero will not have a video call entry
associated with it, although an audio-only call can also have a
reference ID greater than zero.ro CvcCallReferenceIdOrZero (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.1.2.1.2 |
cmqCommonCallActiveNRCallTypeThis object indicates the call type of the active call leg.
tdm(1): TDM call leg.
voip (2): VoIP call leg.ro Enumeration .1.3.6.1.4.1.9.9.769.1.1.2.1.3 |
cmqCommonCallActiveNREnabledMicThis flag indicates whether noise reduction is enabled or
disabled in the MIC direction. A value of 'true' for this object
indicates enabled and a value of 'false' indicates disabled.
Default is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.769.1.1.2.1.4 |
cmqCommonCallActiveNREnabledEarThis flag indicates whether noise reduction is enabled or
disabled in the ear direction. A value of 'true' for this object
indicates enabled and a value of 'false' indicates disabled.
Default is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.769.1.1.2.1.5 |
cmqCommonCallActiveNRDirMicThis object indicates the direction to which noise reduction is
applied in the network with respect to MIC.
tdm (1): audio stream is from TDM,
wan (2): audio stream is from WAN,
lan (3): audio stream is from LAN.ro Enumeration .1.3.6.1.4.1.9.9.769.1.1.2.1.6 |
cmqCommonCallActiveNRDirEarThis object indicates the direction to which noise reduction is
applied in the network with respect to ear.
tdm (1): audio stream is from TDM,
wan (2): audio stream is from WAN,
lan (3): audio stream is from LAN.ro Enumeration .1.3.6.1.4.1.9.9.769.1.1.2.1.7 |
cmqCommonCallActiveNRLibVerThe library version of noise reduction module being used.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.2.1.8 |
cmqCommonCallActiveNRIntensityThe intensity of the noise reduction being applied to audio
signals.ro Integer32 .1.3.6.1.4.1.9.9.769.1.1.2.1.9 |
cmqCommonCallActivePreNRNoiseFloorEstMicThe estimated noise floor level before noise redunction is
applied in the MIC direction.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.1.2.1.10 |
cmqCommonCallActivePostNRNoiseFloorEstMicThe estimated noise floor level after noise redunction is
applied in the MIC direction.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.1.2.1.11 |
cmqCommonCallActivePreNRNoiseFloorEstEarThe estimated noise floor level before noise redunction is
applied in the ear direction.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.1.2.1.12 |
cmqCommonCallActivePostNRNoiseFloorEstEarThe estimated noise floor level after noise redunction is
applied in the ear direction.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.1.2.1.13 |
cmqCommonCallActiveASPTableThis table is the voice and VoIP extension to the
callActiveTable of DIAL-CONTROL-MIB. It contains voice quality
information and statistics when acoustic shock protection is
applied to the
call leg. SEQUENCE OF CmqCommonCallActiveASPEntry .1.3.6.1.4.1.9.9.769.1.1.3 |
cmqCommonCallActiveASPEntryAn entry (conceptual row) in the cmqCommonCallActiveASPTable.
An entry into this table is created when its associated call
active entry in the DIAL-CONTROL-MIB is created which has
corresponding callActiveInfoType equals to 'speech'.
The entry is deleted when its associated call active entry in
the DIAL-CONTROL-MIB is deleted. CmqCommonCallActiveASPEntry .1.3.6.1.4.1.9.9.769.1.1.3.1 |
cmqCommonCallActiveASPConnectionIdThe global connection identifier for the active leg of the
call.ro CvcGUid (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.1.3.1.1 |
cmqCommonCallActiveASPCallReferenceIdThe call reference ID associates the video call entry and voice
call entry of the same endpoint. An audio-only call with a
call reference ID of zero will not have a video call entry
associated with it, although an audio-only call can also have a
reference ID greater than zero.ro CvcCallReferenceIdOrZero (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.1.3.1.2 |
cmqCommonCallActiveASPCallTypeThis object indicates the call type of the active call leg.
tdm (1): TDM call leg.
voip (2): VoIP call leg.ro Enumeration .1.3.6.1.4.1.9.9.769.1.1.3.1.3 |
cmqCommonCallActiveASPEnabledMicThis flag indicates whether acoustic shock protection is
enabled or disabled in the MIC direction. A value of 'true' for
this object indicates enabled and a value of 'false' indicates
disabled. Default is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.769.1.1.3.1.4 |
cmqCommonCallActiveASPEnabledEarThis flag indicates whether acoustic shock protection is
enabled or disabled in the ear direction. A value of 'true' for
this object indicates enabled and a value of 'false' indicates
disabled. Default is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.769.1.1.3.1.5 |
cmqCommonCallActiveASPDirMicThis object indicates the direction to which acoustic shock
protection is applied in the network with respect to MIC.
tdm (1): audio stream is from TDM,
wan (2): audio stream is from WAN,
lan (3): audio stream is from LAN.ro Enumeration .1.3.6.1.4.1.9.9.769.1.1.3.1.6 |
cmqCommonCallActiveASPDirEarThis object indicates the direction to which acoustic shock
protection is applied in the network with respect to ear.
tdm (1): audio stream is from TDM,
wan (2): audio stream is from WAN,
lan (3): audio stream is from LAN.ro Enumeration .1.3.6.1.4.1.9.9.769.1.1.3.1.7 |
cmqCommonCallActiveASPModeThe acoutsic shock protection mode indicates the sensitivity of
operation.
auto (1): default mode, a trade-off between slow and fast mode,
slow (2): slower detection mode,
fast (3): faster detection mode,
expert (4): expert defined mode.ro Enumeration .1.3.6.1.4.1.9.9.769.1.1.3.1.8 |
cmqCommonCallActiveASPVerThe version of acoustic shock protection applied to the audio
signal.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.3.1.9 |
cmqCommonCallActiveNumSigASPTriggMicThe number of significant acoustic shock protection triggers
which has a duration of greater than 2 seconds and is applied
in the MIC direction.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.3.1.10 |
cmqCommonCallActiveDurSigASPTriggMicThe cumulative duration of all significant aooustic shock
protection triggers in the MIC direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.3.1.11 |
cmqCommonCallActiveTotNumASPTriggMicThe total number of acoustic shock protection triggers in the
MIC direction.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.3.1.12 |
cmqCommonCallActiveTotASPDurMicThe total duration of active acoustic shock protection
suppression in milliseconds in the MIC direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.3.1.13 |
cmqCommonCallActiveLoudestFreqEstForLongEpiMicThe loudest frequency estimate for the longest acoustic shock
protection episode in the MIC direction.ro Unsigned32 UNITS "frequency" .1.3.6.1.4.1.9.9.769.1.1.3.1.14 |
cmqCommonCallActiveLongestDurEpiMicThe duration of the longest acoustic shock protection episode
in the MIC direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.3.1.15 |
cmqCommonCallActiveNumSigASPTriggEarThe number of significant acoustic shock protection triggers
which has a duration of greater than 2 seconds and is applied
in the ear direction.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.3.1.16 |
cmqCommonCallActiveDurSigASPTriggEarThe cumulative duration of all significant aooustic shock
protection triggers in the ear direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.3.1.17 |
cmqCommonCallActiveTotNumASPTriggEarThe total number of acoustic shock protection triggers in the
ear direction.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.1.3.1.18 |
cmqCommonCallActiveTotASPDurEarThe total duration of active acoustic shock protection
suppression in milliseconds in the ear direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.3.1.19 |
cmqCommonCallActiveLoudestFreqEstForLongEpiEarThe loudest frequency estimate for the longest acoustic shock
protection episode in the ear direction.ro Unsigned32 UNITS "frequency" .1.3.6.1.4.1.9.9.769.1.1.3.1.20 |
cmqCommonCallActiveLongestDurEpiEarThe duration of the longest acoustic shock protection episode
in the ear direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.1.3.1.21 |
cmqVoiceCallHistory OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.769.1.2 |
cmqVoIPCallHistoryTableThis table is the VoIP extension to the cCallHistoryTable of
CISCO-DIAL-CONTROL-MIB. It contains voice quality information
and statistics for the VoIP call leg. SEQUENCE OF CmqVoIPCallHistoryEntry .1.3.6.1.4.1.9.9.769.1.2.1 |
cmqVoIPCallHistoryEntryAn entry (conceptual row) in the cmqVoIPCallHistoryTable.
An entry into this table is created when its associated call
history entry in the CISCO-DIAL-CONTROL-MIB is created
which has corresponding cCallHistoryInfoType equals to 'speech'.
The entry is deleted when its associated call history entry in
the CISCO-DIAL-CONTROL-MIB is deleted. CmqVoIPCallHistoryEntry .1.3.6.1.4.1.9.9.769.1.2.1.1 |
cmqVoIPCallHistoryConnectionIdThe global connection identifier for the VoIP leg of the
call.ro CvcGUid (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.2.1.1.1 |
cmqVoIPCallHistoryCallReferenceIdThe call reference ID associates the video call entry and voice
call entry of the same endpoint. An audio-only call with a
call reference ID of zero will not have a video call entry
associated with it, although an audio-only call can also have a
reference ID greater than zero.ro CvcCallReferenceIdOrZero (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.2.1.1.2 |
cmqVoIPCallHistoryRxCodecIdThe codec type of the endpoint for the established
voice path.ro CvcCoderTypeRate (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.2.1.1.3 |
cmqVoIPCallHistoryRxSevConcealRatioPctThe ratio of severely concealed seconds to the sum of
unimpaired seconds and concealed seconds.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.2.1.1.4 |
cmqVoIPCallHistoryRxCallConcealRatioPctThe ratio of the recent concealment time to recent talk-mode
time interval. The talk-mode interval is 3 seconds.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.2.1.1.5 |
cmqVoIPCallHistoryRxPktLossRatioPctThe ratio of total effective received packet loss to the number
of RTP packets expected.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.2.1.1.6 |
cmqVoIPCallHistoryRxRoundTripTimeThe round-trip delay is the sum of measured network delay plus
transmit and receive endpoint processing delays.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.7 |
cmqVoIPCallHistoryRxCallDurDuration of receive path open from this peer to voice gateway
for the call leg.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.8 |
cmqVoIPCallHistoryRxVoiceDurDuration of speech received from this peer to voice gateway for
the call leg.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.9 |
cmqVoIPCallHistoryRxPktLossConcealDurThe sum of error predictive concealment and bad protocol
concealment in milliseconds.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.10 |
cmqVoIPCallHistoryRxPktCntExpectedThe expected number of packets to be received.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.2.1.1.11 |
cmqVoIPCallHistoryRxPktCntNotArrivedThe expected number of packets minus the number of received
packets.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.2.1.1.12 |
cmqVoIPCallHistoryRxPktCntComfortNoiseThe number of received comfort noise packets for the
call leg.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.2.1.1.13 |
cmqVoIPCallHistoryRxPktCntUnusableLateThe number of received voice packets that arrived too late to
playout with CODEC (Coder/Decoder) during the call.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.2.1.1.14 |
cmqVoIPCallHistoryRxPktCntDiscardedThe sum of the number of late packets and the number of bad
protocol packets.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.2.1.1.15 |
cmqVoIPCallHistoryRxPktCntEffLossThe total number of never-arrived packets and the number of
discarded packets.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.769.1.2.1.1.16 |
cmqVoIPCallHistoryRxUnimpairedSecOKThe cumulative number of seconds during which there was no
concealment and is considered as OK seconds.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.17 |
cmqVoIPCallHistoryRxConcealSecThe cumulative number of seconds during which there was some
concealment.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.18 |
cmqVoIPCallHistoryRxSevConcealSecThe total number of seconds that are severely concealed from
the start of the voice stream. A severly concealed second has
more than 50ms of concealment.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.19 |
cmqVoIPCallHistoryRxJBufModeThe jitter buffer mode configured for the endpoint.
adaptive(1): an adaptive size algorithm for jitter buffer,
fixed (2): a fixed size algorithm for jitter buffer,
unknown (3): an unknown size algorithm for jitter buffer,
disabled (4): no jitter buffer is configured.ro Enumeration .1.3.6.1.4.1.9.9.769.1.2.1.1.20 |
cmqVoIPCallHistoryRxJBufNomDelayThe nominal jitter buffer playout delay in milliseconds
configured for the endpoint.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.21 |
cmqVoIPCallHistoryRxJBufDlyNowThe playout delay buffer in milliseconds to accommodate
interarrival jitter. The interarrival jitter is the network
arrival jitter between consecutive frames measured at the
receiver.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.22 |
cmqVoIPCallHistoryRxJBufLowWaterThe minimum jitter buffer playout delay in milliseconds
configured for the endpoint.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.23 |
cmqVoIPCallHistoryRxJBuffHiWaterThe maximum jitter buffer playout delay in milliseconds
configured for the endpoint.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.24 |
cmqVoIPCallHistory3550JShortTermAvgThe instantaneous RFC3550 playout delay buffer in milliseconds
to accommodate packet jitter.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.25 |
cmqVoIPCallHistory3550JCallAvgThe long-term average of multiple RFC3550 playout delay buffer
in milliseconds to accommodate packet jitter.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.26 |
cmqVoIPCallHistoryRxSignalLvlThe instantaneous input signal level to the telephony
interface (TDM to IP network) that is used by the call leg.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.2.1.1.27 |
cmqVoIPCallHistoryRxPred107RscoreThe R-factor based MOS Listening Quality, which is listening
quality minus clarity only, with no delay component. A value of
0 indicates an invalid score and a positive value indicates a
valid score.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.1.1.28 |
cmqVoIPCallHistoryRxPred107RMosListenThe MOS Listening Quality Estimate is computed on a running
basis with a new value every 10 seconds of received speech. A
value of 0 indicates an invalid score and a positive value
indicates a valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.2.1.1.29 |
cmqVoIPCallHistoryRxPred107RScoreConvThe R-factor based MOS Conversation Quality, which is based on
loss plus absolute delay. A value of 0 indicates an invalid
score and a positive value indicates a valid score.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.1.1.30 |
cmqVoIPCallHistoryRxPred107RMosConvTh MOS Conversation Quality Estimate is computed on a running
basis with a new value every 10 seconds of received speech. A
value of 0 indicates an invalid score and a positive value
indicates a
valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.2.1.1.31 |
cmqVoIPCallHistoryRxPred107CodecIeBaseThe base Ie score is a factor to calculate IeEff value. It is
obtained from G.113 table according to the codec type and is
defined in killobits per second.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.1.1.32 |
cmqVoIPCallHistoryRxPred107CodecBPLThe bpl is a factor to calculate IeEff value. It is obtained
from G.113 table according to the codec type and is defined in
kilobits per second.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.1.1.33 |
cmqVoIPCallHistoryRxPred107DefaultR0R0 is a factor based on signal-to-noise ratio which also
includes loudness ratings.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.1.1.34 |
cmqVoIPCallHistoryRxPred107IeEffIe-eff is one of the components to contribute to MOS R-factor
calculations, where R-factor is based on ITU-T G.107. Ie is a
component which depends on the real-time packet loss, where as
Ie-eff stands for equipment impairment factor which includes
codec type and packet loss.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.1.1.35 |
cmqVoIPCallHistoryRxPred107IddIdd is one of the components to contribute to MOS R-factor
calculations, where R-factor is based on ITU-T G.107. Idd is a
delay impairment factor which depends on the real-time round
trip delay and echo.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.1.1.36 |
cmqVoIPCallHistoryRxPredMosLqoAvgThe statistical average MOS score of all the previous
instantaneous values. A value of 0 indicates an invalid score
and a positive value indicates a valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.2.1.1.37 |
cmqVoIPCallHistoryRxPredMosLqoRecentThe most recent MOS score with K-factor input based on frame
loss and codec. A value of 0 indicates an invalid score and a
positive value indicates a valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.2.1.1.38 |
cmqVoIPCallHistoryRxPredMosLqoBaselineThe maximum or codec zero-impairment baseline MOS score of all
the previous instantaneous values. A value of 0 indicates an
invalid score and a positive value indicates a valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.2.1.1.39 |
cmqVoIPCallHistoryRxPredMosLqoMinThe statistical minimum MOS score of all the previous
instantaneous values. A value of 0 indicates an invalid score
and a positive value indicates a valid score.ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.9.9.769.1.2.1.1.40 |
cmqVoIPCallHistoryRxPredMosLqoNumWinA window in 8 seconds of frame loss data required to calculate
the MOS estimate.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.1.1.41 |
cmqVoIPCallHistoryRxPredMosLqoBurstsThe MOS score calculated with K-factor input of consecutive
frame loss events, or error bursts. A value of 0 indicates an
invalid score and a positive value indicates a valid score.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.1.1.42 |
cmqVoIPCallHistoryRxPredMosLqoFrLossThe average frame loss count since call start.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.1.1.43 |
cmqVoIPCallHistoryRxPredMosLqoVerIDThe MOS K-factor version ID, e.g. CVTQ v0.95ro SnmpAdminString .1.3.6.1.4.1.9.9.769.1.2.1.1.44 |
cmqVoIPCallHistoryTxCodecIdThe codec type of the endpoint for the established
voice path.ro CvcCoderTypeRate (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.2.1.1.45 |
cmqVoIPCallHistoryTxVadEnabledThis flag indicates whether VAD (Voice Activation Detector) is
enabled or disabled. A value of 'true' indicates enabled and a
value of 'false' indicates disabled. Default is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.769.1.2.1.1.46 |
cmqVoIPCallHistoryTxTmrCallDurDuration of transmit path open from this peer to voice gateway
for the call leg.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.47 |
cmqVoIPCallHistoryTxTmrActSpeechDurDuration of speech transmitted from this peer to voice gateway
for the call leg.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.1.1.48 |
cmqVoIPCallHistoryTxSignalLvlThe instantaneous output signal level from the telephony
interface (TDM to IP network) that is used by the call leg.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.2.1.1.49 |
cmqVoIPCallHistoryTxNoiseFloorThe instantaneous noise floor level estimate if VAD is
enabled.ro Integer32 .1.3.6.1.4.1.9.9.769.1.2.1.1.50 |
cmqCommonCallHistoryNRTableThis table is the voice and VoIP extension to the
cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice
quality information and statistics when noise reduction is
applied to the call leg. SEQUENCE OF CmqCommonCallHistoryNREntry .1.3.6.1.4.1.9.9.769.1.2.2 |
cmqCommonCallHistoryNREntryAn entry (conceptual row) in the cmqCommonCallHistoryTable.
An entry into this table is created when its associated call
history entry in the CISCO-DIAL-CONTROL-MIB is created
which has corresponding cCallHistoryInfoType equals to 'speech'.
The entry is deleted when its associated call history entry in
the CISCO-DIAL-CONTROL-MIB is deleted. CmqCommonCallHistoryNREntry .1.3.6.1.4.1.9.9.769.1.2.2.1 |
cmqCommonCallHistoryNRConnectionIdThe global connection identifier for the history leg of the
call.ro CvcGUid (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.2.2.1.1 |
cmqCommonCallHistoryNRCallReferenceIdThe call reference ID associates the video call entry and voice
call entry of the same endpoint. An audio-only call with a
call reference ID of zero will not have a video call entry
associated with it, although an audio-only call can also have a
reference ID greater than zero.ro CvcCallReferenceIdOrZero (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.2.2.1.2 |
cmqCommonCallHistoryNRCallTypeThis object indicates the call type of the history call leg.
tdm (1): TDM call leg.
voip (2): VoIP call leg.ro Enumeration .1.3.6.1.4.1.9.9.769.1.2.2.1.3 |
cmqCommonCallHistoryNREnabledMicThis flag indicates whether noise reduction is enabled or
disabled in the MIC direction. A value of 'true' for this object
indicates enabled and a value of 'false' indicates disabled.
Default is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.769.1.2.2.1.4 |
cmqCommonCallHistoryNREnabledEarThis flag indicates whether noise reduction is enabled or
disabled in the ear direction. A value of 'true' for this object
indicates enabled and a value of 'false' indicates disabled.
Default is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.769.1.2.2.1.5 |
cmqCommonCallHistoryNRDirMicThis object indicates the direction to which noise reduction is
applied in the network with respect to MIC.
tdm (1): audio stream is from TDM,
wan (2): audio stream is from WAN,
lan (3): audio stream is from LAN.ro Enumeration .1.3.6.1.4.1.9.9.769.1.2.2.1.6 |
cmqCommonCallHistoryNRDirEarThis object indicates the direction to which noise reduction is
applied in the network with respect to ear.
tdm (1): audio stream is from TDM,
wan (2): audio stream is from WAN,
lan (3): audio stream is from LAN.ro Enumeration .1.3.6.1.4.1.9.9.769.1.2.2.1.7 |
cmqCommonCallHistoryNRLibVerThe library version of noise reduction module being used.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.2.1.8 |
cmqCommonCallHistoryNRIntensityThe intensity of the noise reduction being applied to audio
signals.ro Integer32 .1.3.6.1.4.1.9.9.769.1.2.2.1.9 |
cmqCommonCallHistoryPreNRNoiseFloorEstMicThe estimated noise floor level before noise redunction is
applied in the MIC direction.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.2.2.1.10 |
cmqCommonCallHistoryPostNRNoiseFloorEstMicThe estimated noise floor level after noise redunction is
applied in the MIC direction.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.2.2.1.11 |
cmqCommonCallHistoryPreNRNoiseFloorEstEarThe estimated noise floor level before noise redunction is
applied in the ear direction.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.2.2.1.12 |
cmqCommonCallHistoryPostNRNoiseFloorEstEarThe estimated noise floor level after noise redunction is
applied in the ear direction.ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.9.9.769.1.2.2.1.13 |
cmqCommonCallHistoryASPTableThis table is the voice and VoIP extension to the
cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice
quality information and statistics when acoustic shock
protection is applied to the call leg. SEQUENCE OF CmqCommonCallHistoryASPEntry .1.3.6.1.4.1.9.9.769.1.2.3 |
cmqCommonCallHistoryASPEntryAn entry (conceptual row) in the cmqCommonCallHistoryTable.
An entry into this table is created when its associated call
history entry in the CISCO-DIAL-CONTROL-MIB is created
which has corresponding cCallHistoryInfoType equals to 'speech'.
The entry is deleted when its associated call history entry in
the CISCO-DIAL-CONTROL-MIB is deleted. CmqCommonCallHistoryASPEntry .1.3.6.1.4.1.9.9.769.1.2.3.1 |
cmqCommonCallHistoryASPConnectionIdThe global connection identifier for the history leg of the
call.ro CvcGUid (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.2.3.1.1 |
cmqCommonCallHistoryASPCallReferenceIdThe call reference ID associates the video call entry and voice
call entry of the same endpoint. An audio-only call with a
call reference ID of zero will not have a video call entry
associated with it, although an audio-only call can also have a
reference ID greater than zero.ro CvcCallReferenceIdOrZero (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.2.3.1.2 |
cmqCommonCallHistoryASPCallTypeThis object indicates the call type of the history call leg.
tdm (1): TDM call leg
voip (2): VoIP call leg.ro Enumeration .1.3.6.1.4.1.9.9.769.1.2.3.1.3 |
cmqCommonCallHistoryASPEnabledMicThis flag indicates whether acoustic shock protection is
enabled or disabled in the MIC direction. A value of 'true' for
this object indicates enabled and a value of 'false' indicates
disabled. Default is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.769.1.2.3.1.4 |
cmqCommonCallHistoryASPEnabledEarThis flag indicates whether acoustic shock protection is
enabled or disabled in the ear direction. A value of 'true' for
this object indicates enabled and a value of 'false' indicates
disabled. Default is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.769.1.2.3.1.5 |
cmqCommonCallHistoryASPDirMicThis object indicates the direction to which acoustic shock
protection is applied in the network with respect to MIC.
tdm (1): audio stream is from TDM,
wan (2): audio stream is from WAN,
lan (3): audio stream is from LAN.ro Enumeration .1.3.6.1.4.1.9.9.769.1.2.3.1.6 |
cmqCommonCallHistoryASPDirEarThis object indicates the direction to which acoustic shock
protection is applied in the network with respect to ear.
tdm (1): audio stream is from TDM,
wan (2): audio stream is from WAN,
lan (3): audio stream is from LAN.ro Enumeration .1.3.6.1.4.1.9.9.769.1.2.3.1.7 |
cmqCommonCallHistoryASPModeThe acoutsic shock protection mode indicates the sensitivity of
operation.
auto (1): default mode, a trade-off between slow and fast mode,
slow (2): slower detection mode,
fast (3): faster detection mode,
expert (4): expert defined mode.ro Enumeration .1.3.6.1.4.1.9.9.769.1.2.3.1.8 |
cmqCommonCallHistoryASPVerThe version of acoutsic shock protection applied to audio
signals.ro Integer32 .1.3.6.1.4.1.9.9.769.1.2.3.1.9 |
cmqCommonCallHistoryNumSigASPTriggMicThe number of significant acoustic shock protection triggers
which has a duration of greater than 2 seconds and is applied
in the MIC direction.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.3.1.10 |
cmqCommonCallHistoryDurSigASPTriggMicThe cumulative duration of all significant aooustic shock
protection triggers in the MIC direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.3.1.11 |
cmqCommonCallHistoryTotNumASPTriggMicThe total number of acoustic shock protection triggers in the
MIC direction.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.3.1.12 |
cmqCommonCallHistoryTotASPDurMicThe total duration of acoustic shock protection suppression in
milliseconds in the MIC direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.3.1.13 |
cmqCommonCallHistoryLoudestFreqEstForLongEpiMicThe loudest frequency estimate for the longest acoustic shock
protection episode in the MIC direction.ro Unsigned32 UNITS "frequency" .1.3.6.1.4.1.9.9.769.1.2.3.1.14 |
cmqCommonCallHistoryLongestDurEpiMicThe duration of the longest acoustic shock protection episode
in the MIC direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.3.1.15 |
cmqCommonCallHistoryNumSigASPTriggEarThe number of significant acoustic shock protection triggers
which has a duration of greater than 2 seconds and is applied
in the ear direction.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.3.1.16 |
cmqCommonCallHistoryDurSigASPTriggEarThe cumulative duration of all significant aooustic shock
protection triggers in the ear direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.3.1.17 |
cmqCommonCallHistoryTotNumASPTriggEarThe total number of acoustic shock protection triggers in the
ear direction.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.2.3.1.18 |
cmqCommonCallHistoryTotASPDurEarThe total duration of acoustic shock protection suppression in
milliseconds in the ear direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.3.1.19 |
cmqCommonCallHistoryLoudestFreqEstForLongEpiEarThe loudest frequency estimate for the longest acoustic shock
protection episode in the ear direction.ro Unsigned32 UNITS "frequency" .1.3.6.1.4.1.9.9.769.1.2.3.1.20 |
cmqCommonCallHistoryLongestDurEpiEarThe duration of the longest acoustic shock protection episode
in the ear direction.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.769.1.2.3.1.21 |
cmqVideoCallActive OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.769.1.3 |
cmqVideoCallActiveTableThis table is the video extension to the call active table of
DIAL-CONTROL-MIB. It contains video quality information for
the VoIP call leg. SEQUENCE OF CmqVideoCallActiveEntry .1.3.6.1.4.1.9.9.769.1.3.1 |
cmqVideoCallActiveEntryAn entry (conceptual row) in the cmqVideoCallActiveTable.
An entry is added to the table when the below conditions are
met:
1. A call active entry in callActiveTable of the IETF Dial
Control MIB with video callActiveInfoType is created.
2. An entry in cVideoCommonActiveTable of the Cisco Video
Session MIB is created whose cVideoCommonActiveCallType is
pointToPointCall, conferenceCall, or monitoredCall.
The entry is deleted when its associated call active entry in
callActiveTable of the IETF Dial Control MIB is deleted. CmqVideoCallActiveEntry .1.3.6.1.4.1.9.9.769.1.3.1.1 |
cmqVideoCallActiveConnectionIdThe global connection identifier for the video leg of the
call.ro CvcGUid (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.3.1.1.1 |
cmqVideoCallActiveCallReferenceIdThe call reference ID associates the video call entry and voice
call entry of the same endpoint.ro CvcCallReferenceIdOrZero (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.3.1.1.2 |
cmqVideoCallActiveRxMOSInstantInstantaneous aggregated MOS in the receive direction, where
0 is an invalid score and the lowest score starts with 1. A
value of 100 indicates the best video quality.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.3.1.1.3 |
cmqVideoCallActiveRxCompressDegradeInstantThe percentage of quality loss (indicated by RX instantaneous
MOS) due to the initial compression of video at an end point
introduced by a video encoder.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.3.1.1.4 |
cmqVideoCallActiveRxNetworkDegradeInstantThe percentage of quality loss (indicated by RX instantaneous
MOS) due to network factors, such as jitter, delay and packet
loss.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.3.1.1.5 |
cmqVideoCallActiveRxTransscodeDegradeInstantThe percentage of quality loss (indicated by RX instantaneous
MOS) due to the transcoding, including transrating, of a video
stream.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.3.1.1.6 |
cmqVideoCallActiveRxMOSAverageAverage aggregated MOS in the receive direction since the
beginning of the video session. 0 indicates an invalid score and
the lowest score starts with 1. A value of 100 indicates the
best video quality.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.3.1.1.7 |
cmqVideoCallActiveRxCompressDegradeAverageThe percentage of quality loss (indicated by RX average MOS)
due to the initial compression of video at an end point
introduced by a video encoder.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.3.1.1.8 |
cmqVideoCallActiveRxNetworkDegradeAverageThe percentage of quality loss (indicated by RX average MOS)
due to network factors, such as jitter, delay and packet loss.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.3.1.1.9 |
cmqVideoCallActiveRxTransscodeDegradeAverageThe percentage of quality loss (indicated by RX average MOS)
due to the transcoding, including transrating, of a video
stream.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.3.1.1.10 |
cmqVideoCallHistory OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.769.1.4 |
cmqVideoCallHistoryTableThis table is the video extension to the call history table of
CISCO-DIAL-CONTROL-MIB. It contains video quality information
for the VoIP call leg. SEQUENCE OF CmqVideoCallHistoryEntry .1.3.6.1.4.1.9.9.769.1.4.1 |
cmqVideoCallHistoryEntryAn entry (conceptual row) in the cmqVideoCallHistoryTable.
An entry is added to the table when the below conditions are
met:
1. A call history entry in cCallHistoryTable of the Cisco
Dial Control MIB with video cCallHistoryInfoType is created.
2. An entry in cVideoCommonActiveTable of the Cisco Video
Session MIB is created whose cVideoCommonActiveCallType is
pointToPointCall, conferenceCall, or monitoredCall.
The entry is deleted when its associated call history entriy in
cCallHistoryTable of the Cisco Dial Control MIB is deleted. CmqVideoCallHistoryEntry .1.3.6.1.4.1.9.9.769.1.4.1.1 |
cmqVideoCallHistoryConnectionIdThe global connection identifier for the video leg of the
call.ro CvcGUid (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.4.1.1.1 |
cmqVideoCallHistoryCallReferenceIdThe call reference ID associates the video call entry and voice
call entry of the same endpoint.ro CvcCallReferenceIdOrZero (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.769.1.4.1.1.2 |
cmqVideoCallHistoryRxMOSAverageAverage aggregated MOS in the receive direction since the
beginning of the video session. 0 indicates an invalid score and
the lowest score starts with 1. A value of 100 indicates the
best video quality.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.4.1.1.3 |
cmqVideoCallHistoryRxCompressDegradeAverageThe percentage of quality loss (indicated by RX average MOS)
due to the initial compression of video at an end point
introduced by a video encoder.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.4.1.1.4 |
cmqVideoCallHistoryRxNetworkDegradeAverageThe percentage of quality loss (indicated by RX average MOS)
due to network factors, such as jitter, delay and packet loss.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.4.1.1.5 |
cmqVideoCallHistoryRxTransscodeDegradeAverageThe percentage of quality loss (indicated by RX average MOS)
due to the transcoding, including transrating, of a video
stream.ro Unsigned32 .1.3.6.1.4.1.9.9.769.1.4.1.1.6 |
ciscoMediaQualityMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.769.2 |
ciscoMediaQualityMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.769.2.1 |
ciscoMediaQualityMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.769.2.2 |