CISCO-MAU-EXT-MIB
AI MIB Summary
The CISCO-MAU-EXT-MIB extends the standard MAU-MIB to expose Cisco-specific physical layer attributes for Media Attachment Units (MAUs) and network jacks, including proprietary status indicators and diagnostic parameters not defined in RFC 3636. This module enables granular monitoring of copper port characteristics, such as specific fault conditions, signal quality metrics, and vendor-unique operational states on Cisco switching hardware.
A MIB module for extending the MAU-MIB (RFC 3636) to add objects which provide additional management information about MAU or Jack not available in MAU-MIB.
Main OID:
ciscoMauExtMIB.1.3.6.1.4.1.9.9.398
18
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
ciscoMauExtMIBA MIB module for extending the MAU-MIB (RFC 3636)
to add objects which provide additional management
information about MAU or Jack not available in
MAU-MIB. MODULE-IDENTITY .1.3.6.1.4.1.9.9.398 |
cmExtMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.398.0 |
cmExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.398.1 |
cmExtMauConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.398.1.1 |
cmExtJackConfigTableThis table contains management information about MAUs
attached to interfaces with managed jacks. The
objects in this table are in addition to the objects
in the ifJackTable. SEQUENCE OF CmExtJackConfigEntry .1.3.6.1.4.1.9.9.398.1.1.1 |
cmExtJackConfigEntryAn entry containing additional management information
for a particular jack. CmExtJackConfigEntry .1.3.6.1.4.1.9.9.398.1.1.1.1 |
cmExtJackStateIndicates the state of a particular jack.
Within a particular MAU, setting this to 'active' on
a jack which is not the current active jack will
deactivate the current active jack.
Setting the current active jack to 'active' has no
effect.
A value of inactive(2) indicates that the jack is
currently deactiveated. Setting this to 'inactive'
has no effect. Of all the jacks connected to a MAU,
at least one must be active at all times.rw Enumeration .1.3.6.1.4.1.9.9.398.1.1.1.1.1 |
cmExtAutoMdixConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.398.1.2 |
cmExtIfAutoMdixConfigTableThis table contains Auto-MDIX configuration
information for MAUs attached to interfaces in the
device. An entry appears in this table for each
active Auto-MDIX capable MAU connected to
interfaces in the device. SEQUENCE OF CmExtIfAutoMdixConfigEntry .1.3.6.1.4.1.9.9.398.1.2.1 |
cmExtIfAutoMdixConfigEntryAn entry containing Auto-MDIX configuration
information for a MAU connected to the interface. CmExtIfAutoMdixConfigEntry .1.3.6.1.4.1.9.9.398.1.2.1.1 |
cmExtIfAutoMdixEnabledSpecifies if Auto-MDIX feature is enabled on
the MAU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.398.1.2.1.1.1 |
cmExtIfMau OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.398.1.3 |
cmExtIfMauTrafficTableThe (conceptual) table that identifies the type of traffic
carried by the interfaces associated with the MAUs in the device.
This table is sparse dependant on ifMauTable. SEQUENCE OF CmExtIfMauTrafficEntry .1.3.6.1.4.1.9.9.398.1.3.1 |
cmExtIfMauTrafficEntryAn entry (conceptual row) in the cmExtIfMauTrafficEntry. Each
entry contains the type of traffic carried by the interface
associated with the MAU identified by the indices. CmExtIfMauTrafficEntry .1.3.6.1.4.1.9.9.398.1.3.1.1 |
cmExtIfMauTrafficTypeThis object is used to identify the type of traffic carried
by the MAU. This object can take the following values
other(1) - The traffic type is other than anything
defined below
adminControl(2) - This interface carries administrative
and control traffic that is internal to
the device
user(3) - This interface carries the user data
trafficro Enumeration .1.3.6.1.4.1.9.9.398.1.3.1.1.1 |
cmExtMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.398.2 |
cmExtMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.398.2.1 |
cmExtMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.398.2.2 |