CISCO-LWAPP-TUNNEL-MIB
AI MIB Summary
The CISCO-LWAPP-TUNNEL-MIB enables monitoring and configuration of Light Weight Access Point Protocol (LWAPP) tunnel termination states and Local Mobility Anchor (LMA) associations on Cisco Wireless LAN Controllers (WLC). It provides specific visibility into the control plane relationship between the Central Controller and lightweight Access Points, including tunnel status, join states, and mobility anchor bindings required for centralized wireless traffic forwarding.
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration and status information about local mobility anchor to which the controller has the joined.
The relationship between CC and the LWAPP APs can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ LMA + + LMA + + LMA + + LMA +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . . .. . . . . . . . . . . . . . . . . . . . . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ WLC + + WLC + + WLC + + WLC + + WLC +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . . . . . . . . . . . . . . . . . . . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . . . . . . . . . . . . . . . . . . . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the communication between the Access Points and the Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless network associated with an access point.
Gateway
Service provider node which assigns IP and maintains the tunneled clients.
Tunnel
Connection from Wireless LAN controller to the Gateway. Tunnel establishment from WLC and TGW(Tunnel Gateway), in case of Flex-AP, tunnel establishment between AP and TGW.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.
Main OID:
ciscoLwappTunnelMIB.1.3.6.1.4.1.9.9.848
117
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
117 total| Object Name |
|---|
ciscoLwappTunnelMIBThis MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration and status information
about local mobility anchor to which the controller has
the joined.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ LMA + + LMA + + LMA + + LMA +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ WLC + + WLC + + WLC + + WLC + + WLC +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
Gateway
Service provider node which assigns IP and maintains the
tunneled clients.
Tunnel
Connection from Wireless LAN controller to the Gateway.
Tunnel establishment from WLC and TGW(Tunnel Gateway),
in case of Flex-AP, tunnel establishment between
AP and TGW.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol. MODULE-IDENTITY .1.3.6.1.4.1.9.9.848 |
ciscoLwappTunnelMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.0 |
cLWATunnelStatusChangeThis notification is sent when Tunnel status Changes. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.848.0.1 |
cLWATunnelDomainStatusChangeThis notification is sent when Active Gateway
is changed in a Domain. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.848.0.2 |
cLWATunnelClientTypeChangeThis notification is sent when client type is
marked as eogre tunnel user. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.848.0.3 |
ciscoLwappTunnelMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.1 |
cLWATunnelStatusChangeReasonCodeThis object represents tunnel status reason code
down - Tunnel is down
up - Tunnel is up
progress - Client deletion for that tunnel in progress.ro Enumeration .1.3.6.1.4.1.9.9.848.1.1 |
cLWATunnelGwIPTypeThis object represents the IP address type of tunnel
gateway IP.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.848.1.2 |
cLWATunnelGwIPThis object represents tunnel gateway IP.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.848.1.3 |
cLWATunnelGwNameThis object represents tunnel gateway name.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.848.1.4 |
cLWATunnelTypeThis object represents tunnel type.
none - unknown tunnel.
pmipv6 - pmipv6 tunnel type .
gtpv2 - gtpv2 tunnel type .
eogre - eogre tunnel type.ro Enumeration .1.3.6.1.4.1.9.9.848.1.5 |
cLWATunnelDomainNameThis object represents tunnel domain name.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.848.1.6 |
cLWATunnelActiveGwIPTypeThis object represents the IP address type of the
active tunnel gateway IP in domain.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.848.1.7 |
cLWATunnelActiveGwIPThis object represents active gateway IP in domain.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.848.1.8 |
cLWATunnelActiveGwNameThis object represents active gateway name in domain.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.848.1.9 |
cLWATunnelProfileNameThis object represents tunnel profile name.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.848.1.10 |
cLWATunnelRealmThis object represents realm of the user.
eg. In airtel@a.com username, a.com is realm of the userro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.848.1.11 |
cLWATunnelVlanIdThis object represents tunnel vlan Id.ro Unsigned32 .1.3.6.1.4.1.9.9.848.1.12 |
cLWATunnelClientMacAddressThis object represents the MAC address of the
client for this entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.1.13 |
cLWATunnelClientTypeChangeReasonCodeThis object represents client type change from simple to EoGRE.
staticProfile - This indicates WLAN static profile is
applied.
AAAOveride - This indicates that AAA override
parameters are applied.
dot1xAuthentication - This indicates that dot1x authentication
is completed.
mobilityHandoff - This indicates that mobility handoff
has happened.ro Enumeration .1.3.6.1.4.1.9.9.848.1.14 |
ciscoLwappTunnelMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.2 |
ciscoLwappTunnelMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.2.1 |
ciscoLwappTunnelMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.2.2 |
ciscoLwappGatewayTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.3 |
clGatewayTunnelTableThis table contains the list of tunnel gateways configured
on WLC. SEQUENCE OF ClGatewayTunnelEntry .1.3.6.1.4.1.9.9.848.3.1 |
clGatewayTunnelEntryEach entry represents a conceptual row in this table. For
each tunnel created to the gateway, there will be a row. ClGatewayTunnelEntry .1.3.6.1.4.1.9.9.848.3.1.1 |
clGatewayTunnelNameThis object represents the name of tunnel gateway. OCTET STRING .1.3.6.1.4.1.9.9.848.3.1.1.1 |
clGatewayTunnelTypeThis object represents the type of the tunnel gateway.
none - The tunnel is of type unknown.
pmipv6 - The tunnel is of type PMIPV6.
gtpv2 - The tunnel is of type GTPV2.
eogre - The tunnel is of type EoGRE. Enumeration .1.3.6.1.4.1.9.9.848.3.1.1.2 |
clGatewayTunnelAddressTypeThis object specifies the IP address type for tunnel.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.848.3.1.1.3 |
clGatewayTunnelAddressThis object specifies the IP address of the tunnel gateway.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.848.3.1.1.4 |
clGatewayTunnelStatusThis object specifies the tunnel status.
A value of 'true' indicates that the tunnel is up.
A value of 'false' indicates that the tunnel is down.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.3.1.1.5 |
clGatewayTunnelRowStatusThis is the status column for this row and is used to create
and delete specific instances of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.3.1.1.6 |
clGatewayTunnelAdminStatusThis object represents whether the tunnel is enabled to pass
WLAN traffic or not. The traffic can reach gateway based on the
reachability of gateway.
A value of 'true' indicates that the tunnel mapped to WLAN via
the profile can pass WLAN traffic.
A value of 'false' indicates that the tunnel mapped to WLAN via
the profile cannot pass WLAN traffic.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.3.1.1.7 |
clGatewayTunnelMtuThis object represents the MTU of the tunnel between WLC and
gateway.ro Unsigned32 .1.3.6.1.4.1.9.9.848.3.1.1.8 |
clGatewayTunnelFlapCountThis object represents the number of times the tunnel between
WLC and gateway is flapped.ro Unsigned32 .1.3.6.1.4.1.9.9.848.3.1.1.9 |
clGatewayDomainTableThis table contains the list of domains created, each domain
contains maximum of two gateways. At any given time only one
gateway is active in a domain. SEQUENCE OF ClGatewayDomainEntry .1.3.6.1.4.1.9.9.848.3.2 |
clGatewayDomainEntryThis object represents an entry of domain configuration
details. ClGatewayDomainEntry .1.3.6.1.4.1.9.9.848.3.2.1 |
clGatewayDomainNameThis object represents name of the domain. OCTET STRING .1.3.6.1.4.1.9.9.848.3.2.1.1 |
clGatewayDomainTunnelTypeThis object represents type of the gateway tunnel that
domain contains.
none - The tunnel is of type unknown.
pmipv6 - The tunnel is of type PMIPV6.
gtpv2 - The tunnel is of type GTPV2.
eogre - The tunnel is of type EoGRE. Enumeration .1.3.6.1.4.1.9.9.848.3.2.1.2 |
clGatewayDomainActiveGatewayThis object represents name of the active gateway
in the domain.ro OCTET STRING .1.3.6.1.4.1.9.9.848.3.2.1.3 |
clGatewayDomainPrimaryGatewayThis object specifies the primary gateway of the domain.rw OCTET STRING .1.3.6.1.4.1.9.9.848.3.2.1.4 |
clGatewayDomainSecondaryGatewayThis object represents the secondary gateway of the domain.rw OCTET STRING .1.3.6.1.4.1.9.9.848.3.2.1.5 |
clGatewayDomainRowStatusThis is the status column for this row and is used to create
and delete specific instances of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.3.2.1.6 |
clGatewayDomainGatewayListTableThis table contains the list of gateways attached to
the domain. At maximum there will be 2 gateways in domain. SEQUENCE OF ClGatewayDomainGatewayListEntry .1.3.6.1.4.1.9.9.848.3.3 |
clGatewayDomainGatewayListEntryEach entry represents a conceptual row in this table.
For each gateway added to the domain will be a row. ClGatewayDomainGatewayListEntry .1.3.6.1.4.1.9.9.848.3.3.1 |
clGatewayDomainGatewayListRowStatusThis is the status column for this row and is used to create
and delete specific instances of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.3.3.1.1 |
clGatewayProfileTableThis table contains the list of profiles created. Rules are
attached to the profile. Maximum rules attached to per
profile is 32. SEQUENCE OF ClGatewayProfileEntry .1.3.6.1.4.1.9.9.848.3.4 |
clGatewayProfileEntryEach entry represents a conceptual row in this table.
For each profile there will be a row. ClGatewayProfileEntry .1.3.6.1.4.1.9.9.848.3.4.1 |
clGatewayProfileNameThis object represents name of the gateway profile. OCTET STRING .1.3.6.1.4.1.9.9.848.3.4.1.1 |
clGatewayProfileDhcpOpt82StatusThis object specifies status of DHCP option 82
of the profile.
A value of 'true' indicates that DHCP option 82 is enabled.
A value of 'false' indicates that DHCP option 82 is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.3.4.1.2 |
clGatewayProfileDhcpOpt82FormatThis object specifies binary or ASCII format
of the DHCP data.rw Unsigned32 .1.3.6.1.4.1.9.9.848.3.4.1.3 |
clGatewayProfileDhcpOpt82DelimiterThis object specifies delimiter between the attributes
of DHCP option.rw OCTET STRING .1.3.6.1.4.1.9.9.848.3.4.1.4 |
clGatewayProfileCircuitIdThis object specifies of circuit-id attributes per profile.
Maximum circuit-id per profile supported is 5.rw OCTET STRING .1.3.6.1.4.1.9.9.848.3.4.1.5 |
clGatewayProfileRemoteIdThis object specifies of remote-id attributes per profile.
Maximum remote-id per profile supported is 5.rw OCTET STRING .1.3.6.1.4.1.9.9.848.3.4.1.6 |
clGatewayProfileRadiusProxyStatusThis object specifies status of gateway radius proxy
of the profile.
A value of 'true' indicates that radius proxy is enabled.
A value of 'false' indicates that radius proxy is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.3.4.1.7 |
clGatewayProfileRadiusProxyAccountingThis object specifies status of gateway radius proxy
accounting of the profile.
A value of 'true' indicates that accounting is enabled
on radius proxy.
A value of 'false' indicates that accounting is disabled
on radius proxy.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.3.4.1.8 |
clGatewayProfileRowStatusThis is the status column for this row and is used to create
and delete specific instances of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.3.4.1.9 |
clGatewayRuleTableThis table contains the list of rules created. Rules are
attached to the profile. SEQUENCE OF ClGatewayRuleEntry .1.3.6.1.4.1.9.9.848.3.5 |
clGatewayRuleEntryEach entry represents a conceptual row in this table.
For each rule a row will be created. ClGatewayRuleEntry .1.3.6.1.4.1.9.9.848.3.5.1 |
clGatewayRuleNameThis object represents name of the gateway rule, which is
applied to profile. OCTET STRING .1.3.6.1.4.1.9.9.848.3.5.1.1 |
clGatewayRuleTunnelTypeThis object specifies type of the gateway tunnel.
none - The tunnel is of type unknown.
pmipv6 - The tunnel is of type PMIPV6.
gtpv2 - The tunnel is of type GTPV2.
eogre - The tunnel is of type EoGRE.rw Enumeration .1.3.6.1.4.1.9.9.848.3.5.1.2 |
clGatewayRuleVlanIdThis object specifies vlan attached to rule.rw Unsigned32 .1.3.6.1.4.1.9.9.848.3.5.1.3 |
clGatewayRuleDomainNameThis object specifies domain attached to the rule.rw OCTET STRING .1.3.6.1.4.1.9.9.848.3.5.1.4 |
clGatewayRuleRowStatusThis is the status column for this row and is used to create
and delete specific instances of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.3.5.1.5 |
clGatewayRuleRealmThis objects represents the pattern used to match client reams,
in order to classify them.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.848.3.5.1.6 |
clApGatewayTunnelTableThis table contains the list of tunnel gateways on flexconnect
AP. SEQUENCE OF ClApGatewayTunnelEntry .1.3.6.1.4.1.9.9.848.3.6 |
clApGatewayTunnelEntryEach entry represents a conceptual row in this table.
For each tunnel created to the gateway per flexconnect AP,
there will be a row. ClApGatewayTunnelEntry .1.3.6.1.4.1.9.9.848.3.6.1 |
clApGatewayTunnelStatusThis object represents the tunnel status of the flexconnect AP.
A value of 'true' indicates that tunnel is enabled.
A value of 'false' indicates that tunnel is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.3.6.1.1 |
clApGatewayTunnelClientCountThis object represents the total client count per gateway
in flexconnect AP.ro Unsigned32 .1.3.6.1.4.1.9.9.848.3.6.1.2 |
clApGatewayTunnelMtuThis object represents the MTU of the gateway
in flexconnect AP.ro Unsigned32 .1.3.6.1.4.1.9.9.848.3.6.1.3 |
clApGatewayTunnelFlapCountThis object represents the number of time the gateway tunnel
is flapped in flexconnect AP.ro Unsigned32 .1.3.6.1.4.1.9.9.848.3.6.1.4 |
clApGatewayDomainTableThis table contains the list of domains created on AP which
contains gateways. Maximum gateways in domain is 2. At anytime
only one gateway is active in the domain. SEQUENCE OF ClApGatewayDomainEntry .1.3.6.1.4.1.9.9.848.3.7 |
clApGatewayDomainEntryEach entry represents a conceptual row in this table.
For each domain created will be a row. ClApGatewayDomainEntry .1.3.6.1.4.1.9.9.848.3.7.1 |
clApGatewayDomainActiveGatewayThis object represents name of the active gateway
in the domain.ro OCTET STRING .1.3.6.1.4.1.9.9.848.3.7.1.1 |
clGatewayTunnelStatsTableThis table contains the list of tunnel gateways statistics.
Statistics include per gateway informations like gateway
up time, gateway heartbeat information and total number of
clients connected to the gateway. SEQUENCE OF ClGatewayTunnelStatsEntry .1.3.6.1.4.1.9.9.848.3.8 |
clGatewayTunnelStatsEntryEach entry represents a conceptual row in this table.
For each tunnel created to the gateway, there will be a row. ClGatewayTunnelStatsEntry .1.3.6.1.4.1.9.9.848.3.8.1 |
clGatewayTunnelStatsClientCountThis object represents total number of clients connected
to the gateway tunnel.ro Unsigned32 .1.3.6.1.4.1.9.9.848.3.8.1.1 |
clGatewayTunnelStatsTunnelUpTimeThis object represents up time of gateway in seconds.ro Unsigned32 .1.3.6.1.4.1.9.9.848.3.8.1.2 |
clGatewayTunnelStatsKeepaliveLossThis object represents the number of keep alive message
lost per gateway.ro Unsigned32 .1.3.6.1.4.1.9.9.848.3.8.1.3 |
clGatewayTunnelStatsTunnelRxBytesThis object represents the total number of bytes
received per gateway.ro Unsigned64 (CISCO-TC) .1.3.6.1.4.1.9.9.848.3.8.1.4 |
clGatewayTunnelStatsTunnelTxBytesThis object represents the total number of bytes
transmitted per gateway.ro Unsigned64 (CISCO-TC) .1.3.6.1.4.1.9.9.848.3.8.1.5 |
clGatewayTunnelStatsTunnelRxPktsThis object represents the total number of packets
received per gateway.ro Unsigned64 (CISCO-TC) .1.3.6.1.4.1.9.9.848.3.8.1.6 |
clGatewayTunnelStatsTunnelTxPktsThis object represents the total number of packets
transmitted per gateway.ro Unsigned64 (CISCO-TC) .1.3.6.1.4.1.9.9.848.3.8.1.7 |
clApGatewayTunnelStatsTableThis table contains the list of AP tunnel gateways
statistics. SEQUENCE OF ClApGatewayTunnelStatsEntry .1.3.6.1.4.1.9.9.848.3.9 |
clApGatewayTunnelStatsEntryEach entry represents a conceptual row in this table.
For each tunnel created to the gateway,
there will be a row. ClApGatewayTunnelStatsEntry .1.3.6.1.4.1.9.9.848.3.9.1 |
clApGatewayTunnelStatsTunnelUpTimeThis object represents up time of gateway in seconds
of flexconnect AP.ro Unsigned32 .1.3.6.1.4.1.9.9.848.3.9.1.1 |
clApGatewayTunnelStatsKeepaliveLossThis object represents the number of keep alive message
lost per gateway in flexconnect AP.ro Unsigned32 .1.3.6.1.4.1.9.9.848.3.9.1.2 |
clApGatewayTunnelStatsTunnelRxBytesThis object represents the total number of bytes
received per gateway in flexconnect AP.rodeprecated Unsigned32 .1.3.6.1.4.1.9.9.848.3.9.1.3 |
clApGatewayTunnelStatsTunnelTxBytesThis object represents the total number of bytes
transmitted per gateway in flexconnect AP.rodeprecated Unsigned32 .1.3.6.1.4.1.9.9.848.3.9.1.4 |
clApGatewayTunnelStatsTunnelRxPktsThis object represents the total number of packets
received per gateway in flexconnect AP.rodeprecated Unsigned32 .1.3.6.1.4.1.9.9.848.3.9.1.5 |
clApGatewayTunnelStatsTunnelTxPktsThis object represents the total number of packets
transmitted per gateway in flexconnect AP.rodeprecated Unsigned32 .1.3.6.1.4.1.9.9.848.3.9.1.6 |
clApGatewayTunnelStatsTunnelRxBytes64This object represents the total number of bytes
received per gateway in flexconnect AP.ro Unsigned64 (CISCO-TC) .1.3.6.1.4.1.9.9.848.3.9.1.7 |
clApGatewayTunnelStatsTunnelTxBytes64This object represents the total number of bytes
transmitted per gateway in flexconnect AP.ro Unsigned64 (CISCO-TC) .1.3.6.1.4.1.9.9.848.3.9.1.8 |
clApGatewayTunnelStatsTunnelRxPkts64This object represents the total number of packets
received per gateway in flexconnect AP.ro Unsigned64 (CISCO-TC) .1.3.6.1.4.1.9.9.848.3.9.1.9 |
clApGatewayTunnelStatsTunnelTxPkts64This object represents the total number of packets
transmitted per gateway in flexconnect AP.ro Unsigned64 (CISCO-TC) .1.3.6.1.4.1.9.9.848.3.9.1.10 |
clGatewayGlobalInterface OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.4 |
cLGatewayInterfaceThis object specifies the source interface to tunnel.rw OCTET STRING .1.3.6.1.4.1.9.9.848.4.1 |
clGatewayGlobalHeartbeatInterval OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.5 |
cLGatewayHeartbeatIntervalThis object specifies the time interval to send
echo message.rw Unsigned32 .1.3.6.1.4.1.9.9.848.5.1 |
clGatewayGlobalHeartbeatMaxSkipCount OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.6 |
cLGatewayHeartbeatMaxSkipCountThis object specifies the maximum skip count to send echo
message.rw Unsigned32 .1.3.6.1.4.1.9.9.848.6.1 |
clGatewayWlanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.7 |
cLGatewayWlanConfigTableThis table represents the information about Gateway related
config on a WLAN. SEQUENCE OF CLGatewayWlanConfigEntry .1.3.6.1.4.1.9.9.848.7.1 |
cLGatewayWlanConfigEntryEach entry in this table represents the configuration
attributes of Gateway on a WLAN. CLGatewayWlanConfigEntry .1.3.6.1.4.1.9.9.848.7.1.1 |
cLGatewayWlanVlanOverrideEnableThis object specifies the EoGRE Vlan Override status of a
WLAN.
A value of 'true' indicates that EoGRE Vlan Override is
enabled on a WLAN.
A value of 'false' indicates that EoGRE Vlan Override is
disabled on a WLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.7.1.1.1 |
cLGatewayWlanVlanIdThis object specifies the Vlan ID of the Vlan in which client
traffic needs to be carried.rw Unsigned32 .1.3.6.1.4.1.9.9.848.7.1.1.2 |
clGatewayWlanProfileConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.8 |
cLGatewayWlanProfileConfigTableThis table represents the information about Gateway Tunnel
profile mapping config on a WLAN policy profile. A row will
exist in this table for each WLAN policy profile that has a
tunnel profile configured SEQUENCE OF CLGatewayWlanProfileConfigEntry .1.3.6.1.4.1.9.9.848.8.1 |
cLGatewayWlanProfileConfigEntryEach entry in this table represents the configuration
attributes of Gateway Tunnel Profile on a WLAN policy
profile. CLGatewayWlanProfileConfigEntry .1.3.6.1.4.1.9.9.848.8.1.1 |
cLGatewayWlanProfileTunnelProfileThis object specifies the Tunnel Profile to enable on the
WLAN policy profile.rw OCTET STRING .1.3.6.1.4.1.9.9.848.8.1.1.1 |
clGatewayAAAProxyConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.848.9 |
cLGatewayAAAProxyConfigTableThis table represents the configuration details for AAA
proxy server on Tunnel Gateway. A row will exist in this
table for each Tunnel Gateway that behaves as AAA proxy. SEQUENCE OF CLGatewayAAAProxyConfigEntry .1.3.6.1.4.1.9.9.848.9.1 |
cLGatewayAAAProxyConfigEntryEach entry in this table represents the configuration
attributes of Tunnel Gateway AAA Proxy. CLGatewayAAAProxyConfigEntry .1.3.6.1.4.1.9.9.848.9.1.1 |
cLGatewayAAAProxyKeyThis object specifies the AAA Key for the server on the
Tunnel Gateway.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.848.9.1.1.1 |
cLGatewayAAAProxyRowStatusThis is the status column for this row and is used to create
and delete specific instances of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.848.9.1.1.2 |
cLGatewayAAAProxyKeyTypeThis object specifies the AAA Key Type for the server on the
Tunnel Gateway.rw Enumeration .1.3.6.1.4.1.9.9.848.9.1.1.3 |
cLGatewayAAAProxyPortThis object specifies the TCP/UDP port number for the AAA server
on the Tunnel Gateway.rw Unsigned32 .1.3.6.1.4.1.9.9.848.9.1.1.4 |