CISCO-CAT6K-CROSSBAR-MIB
AI MIB Summary
The CISCO-CAT6K-CROSSBAR-MIB enables SNMP-based configuration and operational monitoring of the Catalyst 6000 series crossbar switching fabric, switching bus, and internal bus modules. It exposes specific hardware metrics including crossbar cell loss, bus utilization, internal error counters, and fabric state transitions for the Cisco Catalyst 6000 platform.
The Catalyst 6000 Crossbar MIB provides instrumentation for configuration and operation of the crossbar switching fabric module, and additional functionalities for switching bus and internal bus, etc.
45
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
45 total| Object Name |
|---|
ciscoCat6kCrossbarMIB OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217 |
RFC1155-SMI Unknown .1.3.6.1.4.1.9.9.217 |
ciscoCat6kXbarMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.1 |
cc6kxbarConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.1.1 |
cc6kxbarFallbackModecc6kxbarFallbackMode controls system fallback to bus-mode
after loss of switching fabric module.
'true' - When the last fabric card is removed
system will adjust the supervisor and
line cards switching mode automatically without
resetting the system. With this feature enabled,
the switch might lose traffic while it's
changing the switching mode.
'false' - All the ports in the system will be
disabled when the last fabric card is removed.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.9.217.1.1.1 |
cc6kxbarBusOnlyModeAllowedThis object determines the value of
cc6kxbarModuleModeSwitchingMode of each module.
'true' - Each and every module is allowed to run in bus-only
mode.
'false' - None of the modules are allowed to run in bus-only
mode.i.e., All the non-fabric capable modules will
be powered off. Absence of fabric module results
in all the fabric capable modules being powered
off.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.9.217.1.1.2 |
cc6kxbarTruncatedModeAllowedThis object determines the value of
cc6kxbarModuleModeSwitchingMode of each module.
'true' - With the cc6kxbarMinFabricPresent fabric capable
modules present in the system,
cc6kxbarModuleModeSwitchingMode
will be 'crossbarmode' for each module.
'false' - truncation mode is not allowed.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.9.217.1.1.3 |
cc6kxbarMinFabricPresentThis object indicates the minimum number
of switching fabric capable modules to be present in the
system, for any switching fabric capable module to be in
'crossbarmode' indicated by cc6kxbarModuleModeSwitchingMode,
when cc6kxbarTruncatedModeAllowed is set to 'true'.
When cc6kxbarMinFabricPresent has a
value larger than the number of slots in the system then
the value of cc6kxbarTruncatedModeAllowed has no effect.rw ModuleSlotNumber -- Rsyntax Gauge .1.3.6.1.4.1.9.9.217.1.1.4 |
cc6kxbarLcdBannerTablecc6kxbarLcdBannerTable configures the Lcd banner of the
fabric module. SEQUENCE OF Cc6kxbarLcdBannerEntry .1.3.6.1.4.1.9.9.217.1.1.5 |
cc6kxbarLcdBannerEntryAn entry in cc6kxbarLcdBannerTable.
Entries are created by the agent based on the
size of the lcd banner. Cc6kxbarLcdBannerEntry .1.3.6.1.4.1.9.9.217.1.1.5.1 |
cc6kxbarLcdBannerIndexObject which specifies a unique entry in the
table. Gauge .1.3.6.1.4.1.9.9.217.1.1.5.1.1 |
cc6kxbarLcdBannerBannerMessage that would be displayed on the fabric card LCD.
The size of cc6kxbarLcdBannerBanner should be less than
or equal to the cc6kxbarLcdBannerMaxSize value.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.9.217.1.1.5.1.2 |
cc6kxbarLcdBannerMaxSizeMaximum size of the associated cc6kxbarLcdBannerBanner
object.ro Gauge .1.3.6.1.4.1.9.9.217.1.1.5.1.3 |
cc6kxbarStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.1.2 |
cc6kxbarFabricActiveSlotcc6kxbarFabricActiveSlot indicates the slot number of the
active switching fabric module. A value of zero indicates
that the active switching fabric module is either powered
down or not present in the chassis.ro ModuleSlotNumber -- Rsyntax Gauge .1.3.6.1.4.1.9.9.217.1.2.1 |
cc6kxbarFabricBackupSlotcc6kxbarFabricBackupSlot indicates the slot number of the
backup switching fabric module. A value of zero indicates
that the backup switching fabric module is either powered
down or not present in the chassis.ro ModuleSlotNumber -- Rsyntax Gauge .1.3.6.1.4.1.9.9.217.1.2.2 |
cc6kxbarModuleModeTablecc6kxbarModuleModeTable indicates the switching mode of each
module in the system. SEQUENCE OF Cc6kxbarModuleModeEntry .1.3.6.1.4.1.9.9.217.1.2.3 |
cc6kxbarModuleModeEntryAn entry in cc6kxbarModuleModeTable. The agent creates
an entry when a non switching fabric module
is inserted in the chassis.
The agent destroys an entry when a non switching fabric
module is power down or reset or removed from the chassis. Cc6kxbarModuleModeEntry .1.3.6.1.4.1.9.9.217.1.2.3.1 |
cc6kxbarModuleModeModuleThe module slot number. ModuleSlotNumber -- Rsyntax Gauge .1.3.6.1.4.1.9.9.217.1.2.3.1.1 |
cc6kxbarModuleModeSwitchingModecc6kxbarModuleModeSwitchingMode indicates switching mode
of the cc6kxbarModuleModeModule.
'busmode' - Modules in this mode don't use fabric.
Backplane is used for both lookup and data
forwarding.
'crossbarmode' - Modules in this mode use backplane
for forwarding decision and fabric for data
forwarding
'dcefmode' - Modules in this mode use fabric for data
forwarding and local forwarding is enabled.ro Enumeration .1.3.6.1.4.1.9.9.217.1.2.3.1.2 |
cc6kxbarModuleChannelTablecc6kxbarModuleChannelTable shows the operational status
of fabric channels. This table will be instantiated only when
cc6kxbarFabricActiveSlot has a valid value other than zero. SEQUENCE OF Cc6kxbarModuleChannelEntry .1.3.6.1.4.1.9.9.217.1.2.4 |
cc6kxbarModuleChannelEntryAn entry in cc6kxbarModuleChannelTable. Cc6kxbarModuleChannelEntry .1.3.6.1.4.1.9.9.217.1.2.4.1 |
cc6kxbarModuleChannelModuleThe module slot number. ModuleSlotNumber -- Rsyntax Gauge .1.3.6.1.4.1.9.9.217.1.2.4.1.1 |
cc6kxbarModuleChannelChannelFabric channel number of the cc6kxbarModuleChannelModule. FabricChannelNumber -- Rsyntax Gauge .1.3.6.1.4.1.9.9.217.1.2.4.1.2 |
cc6kxbarModuleChannelModStatusThe status of the fabric channel at the
cc6kxbarModuleChannelModule.ro ChannelStatus -- Rsyntax INTEGER { -- ok(1), -- syncError(2), -- heartbeatError(3), -- crcError(4), -- bufferError(5), -- timeoutError(6), -- unused(7) -- } .1.3.6.1.4.1.9.9.217.1.2.4.1.3 |
cc6kxbarModuleChannelFabStatusThe status of the fabric channel at the
cc6kxbarFabricActiveSlot.ro ChannelStatus -- Rsyntax INTEGER { -- ok(1), -- syncError(2), -- heartbeatError(3), -- crcError(4), -- bufferError(5), -- timeoutError(6), -- unused(7) -- } .1.3.6.1.4.1.9.9.217.1.2.4.1.4 |
cc6kxbarStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.1.3 |
cc6kxbarStatisticsTablecc6kxbarStatisticsTable gives the
fabric channel counters and utilization
information. This table will be instantiated when
cc6kxbarFabricActiveSlot has a valid value other than
zero. SEQUENCE OF Cc6kxbarStatisticsEntry .1.3.6.1.4.1.9.9.217.1.3.1 |
cc6kxbarStatisticsEntryAn entry in cc6kxbarStatisticsTable. Cc6kxbarStatisticsEntry .1.3.6.1.4.1.9.9.217.1.3.1.1 |
cc6kxbarStatisticsModuleThe module slot number. ModuleSlotNumber -- Rsyntax Gauge .1.3.6.1.4.1.9.9.217.1.3.1.1.1 |
cc6kxbarStatisticsChannelFabric channel number associated with the
cc6kxbarStatisticsModule. FabricChannelNumber -- Rsyntax Gauge .1.3.6.1.4.1.9.9.217.1.3.1.1.2 |
cc6kxbarStatisticsInErrorsThe total number of error packets received on
cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule
since this entry was last initialized.ro Counter .1.3.6.1.4.1.9.9.217.1.3.1.1.3 |
cc6kxbarStatisticsOutErrorsThe total number of error packets transmitted on
cc6kxbarStatisticsModule through the
cc6kxbarStatisticsChannel since this entry was
last initialized.ro Counter .1.3.6.1.4.1.9.9.217.1.3.1.1.4 |
cc6kxbarStatisticsOutDroppedThe total number of dropped packets transmitted on the
cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule
since this entry was last initialized.ro Counter .1.3.6.1.4.1.9.9.217.1.3.1.1.5 |
cc6kxbarStatisticsInUtilInput utilization of the cc6kxbarStatisticsChannel for
cc6kxbarStatisticsModule.ro Percent -- Rsyntax INTEGER .1.3.6.1.4.1.9.9.217.1.3.1.1.6 |
cc6kxbarStatisticsOutUtilOutput utilization of the cc6kxbarStatisticsChannel for
cc6kxbarStatisticsModule.ro Percent -- Rsyntax INTEGER .1.3.6.1.4.1.9.9.217.1.3.1.1.7 |
cc6kxbarMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.3 |
cc6kxbarMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.3.1 |
cc6kxbarMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.3.1.2 |
cc6kxbarMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.3.2 |
cc6kxbarModuleStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.3.2.1 |
cc6kxbarChannelStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.3.2.2 |
cc6kxbarChannelStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.3.2.3 |
cc6kxbarFallbackGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.3.2.4 |
cc6kxbarBusOnlyAllowedGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.217.3.2.5 |