CENTILLION-ATMCFG-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CENTILLION-ATMCFG-MIB.
83
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
83 total| Object Name |
|---|
atmElanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.16.1.5.1 |
IMPORTS Unknown .1.3.6.1.4.1.9.10.16.1.5.1 |
atmElanConfigTableATM elan table SEQUENCE OF AtmElanConfigEntry .1.3.6.1.4.1.9.10.16.1.5.1.1 |
atmElanConfigEntryATM elan table.
Each entry is indexed by one field:
elan id. AtmElanConfigEntry .1.3.6.1.4.1.9.10.16.1.5.1.1.1 |
atmElanIndexThe index to the atm elan table.
support total of 32 circuits.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.1.1.1.1 |
atmElanTypeThe elan type.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.1.1.1.2 |
atmElanEnableEnable bit of the elan.
1 = enable elan
2 = disable elanrw Enumeration .1.3.6.1.4.1.9.10.16.1.5.1.1.1.3 |
atmElanAllCktsReturn all pvc circuits that belong to this elan.
Each circuit id is a 32 bit fieldro OCTET STRING .1.3.6.1.4.1.9.10.16.1.5.1.1.1.4 |
atmElanVirtualCardVirtual card number.ro INTEGER .1.3.6.1.4.1.9.10.16.1.5.1.1.1.5 |
atmElanVirtualPortVirtual port number. Currently this number is the Elan idro INTEGER .1.3.6.1.4.1.9.10.16.1.5.1.1.1.6 |
atmElanVirtualSegmentIdVirtual Segment ID of the segment that this Elan is a member ofro INTEGER .1.3.6.1.4.1.9.10.16.1.5.1.1.1.7 |
atmElanStatusThe current status of the entry. Entries may be added by
specifying a value of valid, and removed by setting the status
to invalid.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.1.1.1.8 |
atmElanVirtualSegmentTypeThe virtual segment type.rw VirtualSegmentTypeId .1.3.6.1.4.1.9.10.16.1.5.1.1.1.9 |
atmElanBridgeGroupIdSpanning Tree Group ID of the spanning tree group that the
virtual segment and this Elan are members of.ro INTEGER .1.3.6.1.4.1.9.10.16.1.5.1.1.1.10 |
atmElanMaxUnknownFrameCountMaximum Unknown Frame Count. See the description of
atmElanMaxUnknownFrameTime below.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.1.1.1.11 |
atmElanMaxUnknownFrameTimeMaxinum Unknown Frame Time. Within the period of time
defined by the Maxinum Unknown Frame Time, a LAN Client
will send no more than Maxinum Unknown Frame Count frames
for a given unicast LAN Destination.
This time value is expressed in seconds.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.1.1.1.12 |
atmElanVcBridgingEnableThis object is used to enable or disable VC Bridging on the vport.
The default value for this object is disable.rw EnableIndicator .1.3.6.1.4.1.9.10.16.1.5.1.1.1.13 |
atmElanOneMModemEnableFlag to indicate whether the vport supports one meg modem
feature. When this feature is enabled, data received from
all LAN ports in the same VLAN as the vport will be
forwarded only to the vport.rw EnableIndicator .1.3.6.1.4.1.9.10.16.1.5.1.1.1.14 |
atmCktTable OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.16.1.5.2 |
atmPktCktTableATM virtual circuit table. SEQUENCE OF AtmPktCktEntry .1.3.6.1.4.1.9.10.16.1.5.2.1 |
atmPktCktEntryATM Packet Circuit table entry.
Each entry is indexed by one field:
The circuit index. AtmPktCktEntry .1.3.6.1.4.1.9.10.16.1.5.2.1.1 |
atmPktCktIndexThe index to the packet circuit table.
support total of 256 circuits.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.2.1.1.1 |
atmPktCktPriorityPriority bit of the circuit.
1 = normal priority
2 = high priorityrw Enumeration .1.3.6.1.4.1.9.10.16.1.5.2.1.1.2 |
atmPktCktEnableEnable bit of the circuit.
1 = enable circuit
2 = disable circuitrw Enumeration .1.3.6.1.4.1.9.10.16.1.5.2.1.1.3 |
atmPktCktTypetype bit of the circuit.
1 = virtual circuit
2 = virtual path circuitrw Enumeration .1.3.6.1.4.1.9.10.16.1.5.2.1.1.4 |
atmPktCktCostThe cost of the circuit.
range from 0 to 255 with 0 the least cost.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.2.1.1.5 |
atmPktCktElanIndexThe elan id this circuit belongs to.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.2.1.1.6 |
atmPktCktCardPortThe atm card/port of the circuit. The card/port
takes one byte. This will be replaced by
atmPktCktCardPort2rwdeprecated INTEGER .1.3.6.1.4.1.9.10.16.1.5.2.1.1.7 |
atmPktCktVpiThe packet circuit vpi number.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.2.1.1.8 |
atmPktCktVciThe packet circuit vci number.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.2.1.1.9 |
atmPktCktStatusThe current status of the entry. Entries may be added by
specifying a value of valid, and removed by setting the status
to invalid.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.2.1.1.10 |
atmPktCktCardPort2This mib is added for 24 ports card. This will replace
atmPktCktCardPort. The atm card/port of the circuit.
The card and port takes one byte each.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.2.1.1.11 |
atmCellCktTableATM virtual circuit table. SEQUENCE OF AtmCellCktEntry .1.3.6.1.4.1.9.10.16.1.5.2.2 |
atmCellCktEntryATM Cell Circuit table entry.
Each entry is indexed by one field:
The circuit index. AtmCellCktEntry .1.3.6.1.4.1.9.10.16.1.5.2.2.1 |
atmCellCktIndexThe index to the packet circuit table.
support total of 256 circuits.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.2.2.1.1 |
atmCellCktPriorityPriority bit of the circuit.
1 = normal priority
2 = high priorityrw Enumeration .1.3.6.1.4.1.9.10.16.1.5.2.2.1.2 |
atmCellCktEnableEnable bit of the cell circuit.
1 = enable cell circuit
2 = disable cell circuitrw Enumeration .1.3.6.1.4.1.9.10.16.1.5.2.2.1.3 |
atmCellCktTypetype bit of the circuit.
1 = virtual circuit
2 = virtual path circuitrw Enumeration .1.3.6.1.4.1.9.10.16.1.5.2.2.1.4 |
atmCellCktNumEndptNumber of endpoints in the circuit.
An endpoint is defined as a combination of
card/port/vpi/vci.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.2.2.1.5 |
atmCellCktEndptListList of endpoints for the circuit.
Each endpoint includes
Card (32 bit)
Port (32 bit)
Vpi (32 bit)
Vci (32 bit)rw OCTET STRING .1.3.6.1.4.1.9.10.16.1.5.2.2.1.6 |
atmCellCktStatusThe current status of the entry. Entries may be added by
specifying a value of valid, and removed by setting the status
to invalid.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.2.2.1.7 |
atmPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.16.1.5.3 |
atmPortConfigTableATM Hardware Port Configuration Table SEQUENCE OF AtmPortConfigEntry .1.3.6.1.4.1.9.10.16.1.5.3.1 |
atmPortConfigEntryATM port configuration table.
Each entry is indexed by two fields:
The card index and the port index. AtmPortConfigEntry .1.3.6.1.4.1.9.10.16.1.5.3.1.1 |
atmPortCardIndexThis field indicates the ATM card id.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.3.1.1.1 |
atmPortPortIndexThis field indicates ATM port id.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.3.1.1.2 |
atmPortEnableThis field indicates if the ATM port is enabled or disabled.
2=Disable, 1=Enable. When the port is disabled, no cell
traffic will be ggenerated nor accepted and not SONET signal
is generated.
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.3 |
atmPortLoopTimingEnableThis field indicates if loop timing is enabled or disabled.
2=Disable, 1=Enable.
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.4 |
atmPortHecCosetEnableThis field indicates if heccoset is enabled or disabled.
2=Disable, 1=Enable. When the port is disabled, no cell
traffic will be ggenerated nor accepted and not SONET signal
is generated.
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.5 |
atmPortHecCorrectionEnableThis field indicates if hec correction is enabled or disabled.
2=Disable, 1=Enable.
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.6 |
atmPortHardwareFrameModeThis field indicates the atm frame mode detected by hardware,
Sonet, SDH or NotApply (no cable plugged in) or
other (value other than sonet and sdh).ro Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.7 |
atmPortLocalLoopEnableThis field indicates if local loop is enabled or disabled.
2=Disable, 1=Enable.
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.8 |
atmPortRemoteLoopEnableThis field indicates if loop timing is enabled or disabled.
2=Disable, 1=Enable. When the port is disabled, no cell
traffic will be ggenerated nor accepted and not SONET signal
is generated.
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.9 |
atmPortForceHecErrorEnableThis field indicates if forcing cell header checksum error
is enabled or disabled.
2=Disable, 1=Enable.
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.10 |
atmPortScramblingEnableThis field indicates if scrambing is enabled or disabled.
2=Disable, 1=Enable.
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.11 |
atmPortSigEntityTypeThis object indicates the type of the siganlling entity
that is associated with this ATM port. The type of
a signalling instance can either be no signalling,
UNI which is the User-Network Interface, or Network-
Network Interface iisp(3). Note that there are more
than one NNI supported by the ATM Forum and we support
only IISP.
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.12 |
atmPortSigEntityRoleThis object indicates the role of the signalling entity
that is associated with this ATM port. When
the object atmPortSigEntity is set to a value other
than uni(2), this object is set to other(1).
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.13 |
atmPortSigVersionThis object indicates the version of the siganlling entity
that is associated with this ATM port. This object is
always set to other(1) when the object atmPortSigEntityType
is set to a value other than uni(2). When the value of
this object is set to auto(2), the signalling entity will
start running with UNI 3.1 and learn the correct version
through ILMI.
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.14 |
atmPortSigIlmiThis object is used to enable/disable ILMI.
Exception: this field is read-only for 5782 Goldfish
Module. That is, the user is not allowed to configure
the port on this module.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.15 |
atmPortAdminFrameModeWhen read, this object returns the configured atm
frame mode. When set, only modes sonet and sdh
are supported.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.16 |
atmPortSscopStatusIndicates the operational status of the
service specific connection-oriented protocol
( SSCOP ). SSCOP's function is to correct
transmission errors or losses by selectively
retransmitting the missing frames.
down - Indicates that the peer protocol has
failed to respond to the max number
of status polls by its peer.
up - Indicates the peer protocol is responding
to the status polls.
other - is an undetermined state of the SSCOP
peer protocol.ro Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.17 |
atmPortStatusEnquiryEnableThis object is used to enable or disable the Status
enquiry for this logical link. The default value for
this object is enabled except for the UNI links.
Note that this parameter is used only if the ATM
signalling is enabled.rw EnableIndicator .1.3.6.1.4.1.9.10.16.1.5.3.1.1.18 |
atmPortTimerT309Timer value of timer T309.T309 is a SAAL disconnect timer.
The T309 timer is started when SAAL disconnect is sent
and it is stopped when SAAL disconnect is sent. When the
timer is expired internal connection will be cleared and
virtual calls will be released.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.3.1.1.19 |
atmPortTrafficShapingEnableThis field indicates if traffic shaping for the ATM
port is enabled or disabled. When traffic shaping is
disabled, the port operates at full wire rate.
When traffic shaping is enabled, the port will operate
at the configured rate or available pacing rate.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.3.1.1.20 |
atmSysConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.16.1.5.4 |
atmSysSigEnableThis object is used to enable or disable the ATM signalling
task within the switch. Note that by disabling the ATM
signalling, the switch will not be able to support any ATM
applications such as the LAN Emulation Client. The default
of this value is disable.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.4.1 |
atmPortLogConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.16.1.5.5 |
atmMaxPortLogConfigThe maximum number of logical links
in the atmPortLogConfigTable.ro INTEGER .1.3.6.1.4.1.9.10.16.1.5.5.1 |
atmCurPortLogConfigThe current number of logical links
in the atmPortLogConfigTable.ro INTEGER .1.3.6.1.4.1.9.10.16.1.5.5.2 |
atmPortLogConfigTableATM Logical link Configuration Table. SEQUENCE OF AtmPortLogConfigEntry .1.3.6.1.4.1.9.10.16.1.5.5.3 |
atmPortLogConfigEntryATM logical link configuration table.
Each entry is indexed by three fields:
The card index, port index and the VPI. AtmPortLogConfigEntry .1.3.6.1.4.1.9.10.16.1.5.5.3.1 |
atmPortLogConfigCardIndexThis field indicates the ATM card id.ro INTEGER .1.3.6.1.4.1.9.10.16.1.5.5.3.1.1 |
atmPortLogConfigPortIndexThis field indicates ATM port id.ro INTEGER .1.3.6.1.4.1.9.10.16.1.5.5.3.1.2 |
atmPortLogConfigVPIThis field indicates ATM virtual path identifier.ro INTEGER .1.3.6.1.4.1.9.10.16.1.5.5.3.1.3 |
atmPortLogConfigStatusThis object is used to add, modify or delete a logical
link. A value of other(1) will be returned for read
operations on logical links.
The value add(3) is written when setting up a new link
and modify(4) is used for modifying an existing link.
The value remove(5) is used to release the link.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.5.3.1.4 |
atmPortLogConfigSigEntityTypeThis object indicates the type of the signaling entity
associated with this ATM port. The type of a signaling
can either be no signaling, User-Network Interface,
uni(2), Interim Interswitch Signaling Protocol,
iisp(3) or Private Network-Network Interface, pnni(4).rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.5.3.1.5 |
atmPortLogConfigSigEntityRoleThis object indicates the role of the signaling entity
that is associated with this ATM logical port. This
object can only be set to user(2) or netw(3).
A value of other(1) is returned when neither user(2)
or netw(3) has been specified.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.5.3.1.6 |
atmPortLogConfigSigVersionThis object indicates the version of the signaling entity
that is associated with this ATM port.
When atmPortLogConfigSigEntityType is set to pnni(4), the
signaling entity cannot be set to uni30(3) or uni31(4);
It can be set to pnni10(5) or auto(2).
When this object is set to auto(2), the signaling entity will
start running with UNI 3.1 and learn the correct version
through ILMI.rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.5.3.1.7 |
atmPortLogConfigSigIlmiThis object is used to enable or disable ILMI.
When atmPortLogConfigSigEntityType is set to uni(2) and
atmPortLogConfigSigVersion is set to auto(2), this
object must be set to enabled(1).
When atmPortLogConfigSigEntityType is set to iisp(3), this
object must be set to disabled(2).rw Enumeration .1.3.6.1.4.1.9.10.16.1.5.5.3.1.8 |
atmPortLogConfigAdmWeightCbrThe Administrative weight of this VP for
the constant bit rate service category. A value
of zero is returned if the link is non-PNNI.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.5.3.1.9 |
atmPortLogConfigAdmWeightUbrThe Administrative weight of this VP for
the unspecified bit rate service category.
A value of zero is returned if the link is
non-PNNI.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.5.3.1.10 |
atmPortLogConfigStatusEnquiryEnableThis object is used to enable or disable the Status
enquiry. Note that this parametwer is used only
if the ATM signalling is enabled.rw EnableIndicator .1.3.6.1.4.1.9.10.16.1.5.5.3.1.11 |
atmPortLogConfigTimerT309Timer value of timer T309.T309 is a SAAL disconnect timer.
The T309 timer is started when SAAL disconnect is sent
and it is stopped when SAAL disconnect is sent. When the
timer is expired internal connection will be cleared and
virtual calls will be released.rw INTEGER .1.3.6.1.4.1.9.10.16.1.5.5.3.1.12 |