CENTILLION-ROOT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
57
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
57 total| Object Name |
|---|
centillion OBJECT IDENTIFIER .1.3.6.1.4.1.930 |
SNMPv2-SMI-v1 Unknown .1.3.6.1.4.1.930 |
cnProducts OBJECT IDENTIFIER .1.3.6.1.4.1.930.1 |
cnCentillion100 OBJECT IDENTIFIER .1.3.6.1.4.1.930.1.1 |
cnIBM8251 OBJECT IDENTIFIER .1.3.6.1.4.1.930.1.2 |
cnBayStack301 OBJECT IDENTIFIER .1.3.6.1.4.1.930.1.3 |
cn5000BH-MCP OBJECT IDENTIFIER .1.3.6.1.4.1.930.1.4 |
cnCentillion50N OBJECT IDENTIFIER .1.3.6.1.4.1.930.1.5 |
cnCentillion50T OBJECT IDENTIFIER .1.3.6.1.4.1.930.1.6 |
cn5005BH-MCP OBJECT IDENTIFIER .1.3.6.1.4.1.930.1.7 |
proprietary OBJECT IDENTIFIER .1.3.6.1.4.1.930.2 |
cnSystem OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.1 |
sysChassis OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.1.1 |
chassisTypeThe chassis type.ro SsChassisType .1.3.6.1.4.1.930.2.1.1.1 |
chassisBkplTypeThe chassis backplane type.ro SsBackplaneType .1.3.6.1.4.1.930.2.1.1.2 |
chassisPs1FailStatusPower supply 1 failure indicator. A value of on (1)
indicates a failure on power supply 1.ro FailIndicator .1.3.6.1.4.1.930.2.1.1.3 |
chassisPs2FailStatusPower supply 2 failure indicator. A value of on (1)
indicates a failure on power supply 2.ro FailIndicator .1.3.6.1.4.1.930.2.1.1.4 |
chassisFanFailStatusSystem chassis fan failure indicator. A value of on (1)
indicates a failure on one or both of the system fans.ro FailIndicator .1.3.6.1.4.1.930.2.1.1.5 |
chassisSerialNumberChassis serial number.ro OCTET STRING .1.3.6.1.4.1.930.2.1.1.6 |
chassisPartNumberChassis part number.ro OCTET STRING .1.3.6.1.4.1.930.2.1.1.7 |
slotConfigTableThe chassis slot configuration table. SEQUENCE OF SlotConfigEntry .1.3.6.1.4.1.930.2.1.1.9 |
slotConfigEntryWhat type of module is in each slot of the chassis. SlotConfigEntry .1.3.6.1.4.1.930.2.1.1.9.1 |
slotNumberThe chassis slot number. Valid entries are system dependent
based on the chassis type.ro INTEGER .1.3.6.1.4.1.930.2.1.1.9.1.1 |
slotModuleTypeModule type.rodeprecated SsModuleType .1.3.6.1.4.1.930.2.1.1.9.1.2 |
slotModuleHwVerThe hardware revision of the module.ro OCTET STRING .1.3.6.1.4.1.930.2.1.1.9.1.3 |
slotModuleSerialNumberModule serial number. Format is 3 BCD digits.ro OCTET STRING .1.3.6.1.4.1.930.2.1.1.9.1.4 |
slotModuleSwVerThe software revision of the module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.930.2.1.1.9.1.5 |
slotModuleStatusThis indicates the operational status of the module.ro Enumeration .1.3.6.1.4.1.930.2.1.1.9.1.6 |
slotModuleLedsStatus of the module LEDs. Each LED bank is encoded
in four bits (nibble), one bit for each LED. The least
significant bit of each nibble represents the bottom LED
of each bank. The first octet in the string, as read from
left to right represents the first LED banks.ro OCTET STRING .1.3.6.1.4.1.930.2.1.1.9.1.7 |
slotModuleResetThis indicates the reset state of the module. Writing with
the value reset (2) will reset the module.rw Enumeration .1.3.6.1.4.1.930.2.1.1.9.1.8 |
slotConfigDeleteSetting this object causes the configuration of the
slot to be deleted. When read, this object has a value
of false(2).rw Boolean .1.3.6.1.4.1.930.2.1.1.9.1.9 |
slotConfigMediaTypeThe configured card media type. In the case of a card
mismatch, the configured media type and the module type
will not match.ro SsMediaType .1.3.6.1.4.1.930.2.1.1.9.1.10 |
slotModuleMaxRAMThis indicates maximum RAM size in KB can be installed in
this module.ro INTEGER .1.3.6.1.4.1.930.2.1.1.9.1.11 |
slotModuleInstalledRAMThis indicates installed RAM in KB of this module.ro INTEGER .1.3.6.1.4.1.930.2.1.1.9.1.12 |
slotModuleFlashSizeThis indicates installed flash size in KB of this module.ro INTEGER .1.3.6.1.4.1.930.2.1.1.9.1.13 |
slotModuleProductImageIdThis indicates the product target image id of this module.ro Enumeration .1.3.6.1.4.1.930.2.1.1.9.1.14 |
slotModuleBaseMacAddressThis object returns the module base Mac address. A physical
port's default Mac address can be computed based on this address
by using following computation:
Port(n)MacAddress = Moudle base Mac address + Port(n); where (n)
is the 0-based port number.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.930.2.1.1.9.1.15 |
slotLastResetEPCThe programe counter realated to the last reset.ro Counter32 .1.3.6.1.4.1.930.2.1.1.9.1.16 |
slotLastResetVirtualAddressThe bus address.ro Counter32 .1.3.6.1.4.1.930.2.1.1.9.1.17 |
slotLastResetCauseRegister value related to the last resetro Counter32 .1.3.6.1.4.1.930.2.1.1.9.1.18 |
slotLastResetTimeStampA integer value of the system clock since last reset.ro Counter32 .1.3.6.1.4.1.930.2.1.1.9.1.19 |
slotConfigAddSetting this object causes the configuration of the
slot to be updated to match the module currently in
the slot. When read, this object always returns
false(2).rw Boolean .1.3.6.1.4.1.930.2.1.1.9.1.20 |
slotConfigExtClockSourceThis field indicates the external clock source.
0 = Local Oscillator, 1..N = ATM port id for
external clock source. This object only applies
to ATM MDA modules with SM, MM, or UTP media types.rw INTEGER .1.3.6.1.4.1.930.2.1.1.9.1.21 |
slotConfigTrafficShapingRateConfigured traffic shaping rate in kilo bits per second
on an ATM module. The actual rate may be different
from the configured rate depending upon the physical
interface of ports in the module.rw INTEGER .1.3.6.1.4.1.930.2.1.1.9.1.22 |
sysConfig OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.1.2 |
sysMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.1.3 |
sysTrap OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.1.4 |
sysMcpRedundTrap OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.1.4.1 |
cnPvcTraps OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.1.4.2 |
sysEvtLogMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.1.5 |
cnATM OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2 |
atmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.1 |
atmMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.2 |
atmLane OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.3 |
atmSonet OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.4 |
extensions OBJECT IDENTIFIER .1.3.6.1.4.1.930.3 |
cnTemporary OBJECT IDENTIFIER .1.3.6.1.4.1.930.4 |