CENTILLION-LESBUS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CENTILLION-LESBUS-MIB.
73
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
73 total| Object Name |
|---|
cnLesBusExtnGroup OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.3.1 |
IMPORTS Unknown .1.3.6.1.4.1.930.2.2.3.1 |
cnLesBusTablesmart les/bus enable and unique server id. SEQUENCE OF CnLesBusEntry .1.3.6.1.4.1.930.2.2.3.1.1 |
cnLesBusEntry. CnLesBusEntry .1.3.6.1.4.1.930.2.2.3.1.1.1 |
cnLesBusConfIndexA value which uniquely identifies a conceptual row in the lesConfTable.ro LesLocalIndex (LAN-EMULATION-LES-MIB) .1.3.6.1.4.1.930.2.2.3.1.1.1.1 |
cnLesBusSmartLesThis object is used to turn on/off smart les/bus.rw Enumeration .1.3.6.1.4.1.930.2.2.3.1.1.1.2 |
cnLesBusServerIdThis object specifies the unique server id among all les/bus pairs
that serve the same elan.rw INTEGER .1.3.6.1.4.1.930.2.2.3.1.1.1.3 |
cnLesBusBusAddrSpecThe bus address.rw AtmLaneAddress .1.3.6.1.4.1.930.2.2.3.1.1.1.4 |
cnLesBusBusAddrActualThe bus address.ro AtmLaneAddress .1.3.6.1.4.1.930.2.2.3.1.1.1.5 |
cnLesBusPeerTableThe LES/BUS peer table. This table contains the all
LES/BUS pairs of the ELANs managed by the agent. The
LES/BUS instantiated by the agent is also included
in this table. Other LES/BUS pairs that are not
running in the same system being managed by the agent
are configured by the user. Note that there is no
verification protocol supported for the entries configured
by the user. SEQUENCE OF CnLesBusPeerEntry .1.3.6.1.4.1.930.2.2.3.1.2 |
cnLesBusPeerEntryA pair of LES/BUS for the ELAN managed by the agent. CnLesBusPeerEntry .1.3.6.1.4.1.930.2.2.3.1.2.1 |
cnLesBusIndexIndex into the ELAN this pair of LES/BUS is servicing.ro LesLocalIndex (LAN-EMULATION-LES-MIB) .1.3.6.1.4.1.930.2.2.3.1.2.1.1 |
cnLesBusPeerIndexAn arbitrary integer which uniquly identifies a pair
of LES/BUS within an ELAN.ro INTEGER .1.3.6.1.4.1.930.2.2.3.1.2.1.2 |
cnLesBusPeerLesAddrThe ATM address of the LES.rw AtmLaneAddress .1.3.6.1.4.1.930.2.2.3.1.2.1.3 |
cnLesBusPeerBusAddrThe ATM address of the BUS.rw AtmLaneAddress .1.3.6.1.4.1.930.2.2.3.1.2.1.4 |
cnLesBusPeerStatusThis object is used to create or destroy an entry
from this table. This object also reflect the current
state of the peer LES/BUS. If both peer LES and BUS are
connected to this LES/BUS, then active(3) is returned
when read, otherwise inactive(4) will be returned.rw Enumeration .1.3.6.1.4.1.930.2.2.3.1.2.1.5 |
cnLesBusPortTableThe ATM port a LESBUS uses to establish virtual circuits(VCC).
A User can choose to either select the any-port capability,
which let the LESBUS choose whichever the ATM port is available.
Or the user can specify a list of ATM ports the LESBUS will
request the VCCs. When a list of ATM ports are specified,
There are four objects used for specifying the ATM port
numbers. The object cnLesBusPortAtmPort1 is used first,
the object cnLesBusPortAtmPort2 second if the first failed
and so on. SEQUENCE OF CnLesBusPortEntry .1.3.6.1.4.1.930.2.2.3.1.3 |
cnLesBusPortEntryEach entry represent a LESBUS maintained by this agent.
The entries are indexed by the same index (LesBusIndex)
from the LesBusConfigTable defined in the ATM Forum LESBUS MIB. CnLesBusPortEntry .1.3.6.1.4.1.930.2.2.3.1.3.1 |
cnLesBusPortElanIndexAn index to the LESBUS pair that will use this table.ro INTEGER .1.3.6.1.4.1.930.2.2.3.1.3.1.1 |
cnLesBusPortIndexAn index to an entry in the port tablero INTEGER .1.3.6.1.4.1.930.2.2.3.1.3.1.2 |
cnLesBusCardIdCard ID of the ATM card.rw INTEGER .1.3.6.1.4.1.930.2.2.3.1.3.1.3 |
cnLesBusPortIdPort ID of the ATM port.rw INTEGER .1.3.6.1.4.1.930.2.2.3.1.3.1.4 |
cnLesBusPortStatusThe object is used to create or destroy an entry
from this table. This object also reflect the current
state of the port entry. If the client uses this port
to join the ELAN, then active(3) is returned when read.rw Enumeration .1.3.6.1.4.1.930.2.2.3.1.3.1.5 |
cnLecExtnGroup OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.3.2 |
cnLecServerTableThe LE Client's user configured server list.
The LEC can use any pf the servers defined in this
table. The search order matches the order of the
entries in the table. SEQUENCE OF CnLecServerEntry .1.3.6.1.4.1.930.2.2.3.2.1 |
cnLecServerEntryA LE server that the LEC can use. CnLecServerEntry .1.3.6.1.4.1.930.2.2.3.2.1.1 |
cnLecServerIndexAn index to the lec server table.ro INTEGER .1.3.6.1.4.1.930.2.2.3.2.1.1.1 |
cnLecServerTypeThe field specifies how the the LEC can get to the server
and the server type (LES or LECS). The LEC can connect
to either the LECS via ILMI/PVC/ATM address or the LES
via ATm address.rw Enumeration .1.3.6.1.4.1.930.2.2.3.2.1.1.2 |
cnLecServerAddressThe field specifies the ATM address (20 octets) of the
server when an ATM address is needed. If an ATM address
is not needed, zero will be returned when read.rw AtmLaneAddress .1.3.6.1.4.1.930.2.2.3.2.1.1.3 |
cnLecServerStatusThe object is used to create or destroy an entry
from this table. The entry is always in active
state once created.rw Enumeration .1.3.6.1.4.1.930.2.2.3.2.1.1.4 |
cnLecPortTableThe ATM port a LEC uses to establish virtual circuits(VCC).
A User can choose to either select the any-port capability,
which let the LEC choose whichever the ATM port is available.
Or the user can specify a list of ATM ports the LEC will
request the VCCs. When a list of ATM ports are specified,
There are four objects used for specifying the ATM port
numbers. The object cnLecPortAtmPort1 is used first,
the object cnlecPortAtmPort2 second if the first failed
and so on. SEQUENCE OF CnLecPortEntry .1.3.6.1.4.1.930.2.2.3.2.2 |
cnLecPortEntryEach entry represent a LEC maintained by this agent.
The entries are indexed by the same index (lecIndex)
from the lecConfigTable defined in the ATM Forum LEC MIB. CnLecPortEntry .1.3.6.1.4.1.930.2.2.3.2.2.1 |
cnLecPortlecIndexAn index to the LEC that will use this table.ro INTEGER .1.3.6.1.4.1.930.2.2.3.2.2.1.1 |
cnLecPortIndexAn index to an entry in the port tablero INTEGER .1.3.6.1.4.1.930.2.2.3.2.2.1.2 |
cnLecCardIdCard ID of the ATM card.rw INTEGER .1.3.6.1.4.1.930.2.2.3.2.2.1.3 |
cnLecPortIdPort ID of the ATM port.rw INTEGER .1.3.6.1.4.1.930.2.2.3.2.2.1.4 |
cnLecPortStatusThe object is used to create or destroy an entry
from this table. This object also reflect the current
state of the port entry. If the client uses this port
to join the ELAN, then active(3) is returned when read.rw Enumeration .1.3.6.1.4.1.930.2.2.3.2.2.1.5 |
cnLecConfigExtnTableThis the extension table of lecConfigTable. SEQUENCE OF CnLecConfigExtnEntry .1.3.6.1.4.1.930.2.2.3.2.3 |
cnLecConfigExtnEntryEach table entry contains configuration information
for one LAN Emulation Client. CnLecConfigExtnEntry .1.3.6.1.4.1.930.2.2.3.2.3.1 |
cnLecTargetlessArpThis object is used to enable or disable the
targetless LE_ARP.rw EnableIndicator .1.3.6.1.4.1.930.2.2.3.2.3.1.1 |
cnLecQoSAdminStatusThis object is used to enable or disable QoS
features for the LEC. QoS can be enabled for
V2 capable LECs in Ethernet ELANs.rw EnableIndicator .1.3.6.1.4.1.930.2.2.3.2.3.1.2 |
cnLecQoSOperStatusThis object is true when the LEC is able to
conduct QoS feature operation. It is false
when QoS features are not permitted, such as
when cnLecQoSAdminStatus is not enabled or the
LEC does not join a V2 capable ELAN.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.930.2.2.3.2.3.1.3 |
cnLecsExtnGroup OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.3.3 |
cnLecsPortTableThe ATM port a Lecs uses to establish virtual circuits(VCC).
A User can choose to either select the any-port capability,
which let the Lecs choose whichever the ATM port is available.
Or the user can specify a list of ATM ports the Lecs will
request the VCCs. When a list of ATM ports are specified,
There are four objects used for specifying the ATM port
numbers. The object cnLecsPortAtmPort1 is used first,
the object cnLecsPortAtmPort2 second if the first failed
and so on. SEQUENCE OF CnLecsPortEntry .1.3.6.1.4.1.930.2.2.3.3.1 |
cnLecsPortEntryEach entry represent a Lecs maintained by this agent.
The entries are indexed by the same index (LecsIndex)
from the LecsConfigTable defined in the ATM Forum Lecs MIB. CnLecsPortEntry .1.3.6.1.4.1.930.2.2.3.3.1.1 |
cnLecsIndexAn index to the Lecs pair that will use this table.ro INTEGER .1.3.6.1.4.1.930.2.2.3.3.1.1.1 |
cnLecsPortIndexAn index to an entry in the port tablero INTEGER .1.3.6.1.4.1.930.2.2.3.3.1.1.2 |
cnLecsCardIdCard ID of the ATM card.rw INTEGER .1.3.6.1.4.1.930.2.2.3.3.1.1.3 |
cnLecsPortIdPort ID of the ATM port.rw INTEGER .1.3.6.1.4.1.930.2.2.3.3.1.1.4 |
cnLecsPortStatusThe object is used to create or destroy an entry
from this table. This object also reflect the current
state of the port entry. If the client uses this port
to join the ELAN, then active(3) is returned when read.rw Enumeration .1.3.6.1.4.1.930.2.2.3.3.1.1.5 |
cnLecsExtnTableLECS LANE extension table SEQUENCE OF CnLecsExtnEntry .1.3.6.1.4.1.930.2.2.3.3.2 |
cnLecsExtnEntryAn extension to the lecsConfEntry which contains
objects associated to a LECS. CnLecsExtnEntry .1.3.6.1.4.1.930.2.2.3.3.2.1 |
cnLecsExtnAtmAddressSelectLECS ATM Address selection.
atmForum(1) - ATM Forum well known ATM Address.
userDefined(2) - User defined ATM Address.rw Enumeration .1.3.6.1.4.1.930.2.2.3.3.2.1.1 |
atmCallRoutingConfig OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.3.4 |
atmCallRoutingConfigTableATM call routing config table SEQUENCE OF AtmCallRoutingConfigEntry .1.3.6.1.4.1.930.2.2.3.4.1 |
atmCallRoutingConfigEntryObjects atmCallRoutingId, and atmCallRoutingRowStatus are
required during row creation. And object elanLesRowStatus
is required during row deletion. AtmCallRoutingConfigEntry .1.3.6.1.4.1.930.2.2.3.4.1.1 |
atmCallRoutingIdRoute idro INTEGER .1.3.6.1.4.1.930.2.2.3.4.1.1.1 |
atmCallRoutingAtmAddressRoutable ATM address for route type host and network.
Filter prefix for a default route entry.rw AtmLaneAddress .1.3.6.1.4.1.930.2.2.3.4.1.1.2 |
atmCallRoutingTypeA complete ATM address is specified in a routing entry
when the route type is host. For the network route
type, only partial ATM address, usually the network
prefix portion, is specified. Linkgroup is a special
route type which can be defined in a way that loops are
eliminated. The default type allows a route entry
to be created that forwards to all destinations.rw Enumeration .1.3.6.1.4.1.930.2.2.3.4.1.1.3 |
atmCallRoutingCardThis field indicates the ATM card id.rw INTEGER .1.3.6.1.4.1.930.2.2.3.4.1.1.4 |
atmCallRoutingPortThis field indicates ATM port id.rw INTEGER .1.3.6.1.4.1.930.2.2.3.4.1.1.5 |
atmCallRoutingCostThe cost of the route. range from 0 to 255 with 0
the least cost. This is the link group id if
atmCallRoutingType is linkGroup.rw INTEGER .1.3.6.1.4.1.930.2.2.3.4.1.1.6 |
atmCallRoutingEnableEnable bit of the call routing.
1 = enable routing
2 = disable routingrw Enumeration .1.3.6.1.4.1.930.2.2.3.4.1.1.7 |
atmCallRoutingRowStatusThe current status of the entry. Entries may be added by
specifying a value of valid, and removed by setting the status
to invalid.rw Enumeration .1.3.6.1.4.1.930.2.2.3.4.1.1.8 |
atmCallRoutingScopePNNI scope valuerw INTEGER .1.3.6.1.4.1.930.2.2.3.4.1.1.9 |
atmCallRoutingVpiThe VPI of the route.rw INTEGER .1.3.6.1.4.1.930.2.2.3.4.1.1.10 |
atmCallRoutingFilterEnableEnable bit of the filter for a default route.
When the filter is enabled, data will be forwarded
to all destinations except for a defined prefix.rw EnableIndicator .1.3.6.1.4.1.930.2.2.3.4.1.1.11 |
cnLaneGlobalConf OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.3.5 |
cnLaneSigGlobal parameter to enable or disable signalling
in the box.rw Enumeration .1.3.6.1.4.1.930.2.2.3.5.1 |
cnLaneEdgeGlobal configuration of the box
edge: configured as LEC only services
edgeAndswitch: configured as full LANE services
switchOnly: configured as switch only services.rw Enumeration .1.3.6.1.4.1.930.2.2.3.5.2 |
cnLaneNetPrefixUseful if the box is configured as edgeAndswitch.rw OCTET STRING .1.3.6.1.4.1.930.2.2.3.5.3 |
cnLaneStatusEnquiryEnableThis object is used to enable or disable the Status
enquiry. Note that this parametwer is used only
if the ATM signalling is enabled.rw EnableIndicator .1.3.6.1.4.1.930.2.2.3.5.4 |
cnLaneStatusEnquiryIntervalThe Status Enquiry requests for each call are sent
periodically at this interval (in secs). Note that
this parametwer is used only if the ATM signalling
and atmSysStatusEnquiryEnable are enabled.rw TimeIntervalSec .1.3.6.1.4.1.930.2.2.3.5.5 |