CENTILLION-ATMMON-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CENTILLION-ATMMON-MIB.
55
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
55 total| Object Name |
|---|
atmPortMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.2.1 |
IMPORTS Unknown .1.3.6.1.4.1.930.2.2.2.1 |
atmPortStatTableATM Port Statistics SEQUENCE OF AtmPortStatEntry .1.3.6.1.4.1.930.2.2.2.1.1 |
atmPortStatEntryATM Port Statistics.
Each entry is indexed by two fields:
The card number and the port number. AtmPortStatEntry .1.3.6.1.4.1.930.2.2.2.1.1.1 |
atmStatCardIdThis field is the card indexro CardId .1.3.6.1.4.1.930.2.2.2.1.1.1.1 |
atmStatPortIdThis field is the port indexro PortId .1.3.6.1.4.1.930.2.2.2.1.1.1.2 |
atmSigDetectedThis bit field indicates if the port receives
signal from the remote ATM port.
1= signal present, 2= no signal.ro Enumeration .1.3.6.1.4.1.930.2.2.2.1.1.1.3 |
atmRxBadHecCellThe number of cells received that has a bad ATM
cell header (HEC). The error is usually due to
a physical layer problem. For example, when the
fiber is first connected to the system or a clock
mismatch.ro Counter .1.3.6.1.4.1.930.2.2.2.1.1.1.4 |
atmRxDmaDropCellThe number of cells received but is discarded by
the ATM header validation checking. The error
is usually due to a incorrectly configured VPI/VCI
or other configuration error.ro Counter .1.3.6.1.4.1.930.2.2.2.1.1.1.5 |
atmRxGoodCellThe number of cells received that is valid.ro Counter .1.3.6.1.4.1.930.2.2.2.1.1.1.6 |
atmTxDmaDropCellThe number of outgoing cells dropped due to
congestions.ro Counter .1.3.6.1.4.1.930.2.2.2.1.1.1.7 |
atmTxGoodCellThe number of cells transmitted.ro Counter .1.3.6.1.4.1.930.2.2.2.1.1.1.8 |
atmSuniFifoOverrunThe number of times that the SUNI FIFO overrun status bit has been read
in the true state.ro Counter .1.3.6.1.4.1.930.2.2.2.1.1.1.9 |
atmElanMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.2.2 |
atmElanPvcStatisticTableTmp ATM Elan PVC statistics SEQUENCE OF AtmElanPvcStatisticEntry .1.3.6.1.4.1.930.2.2.2.2.1 |
atmElanPvcStatisticEntryATM Elan PVC statistics.
The Elan ID is used as
the index of the object. AtmElanPvcStatisticEntry .1.3.6.1.4.1.930.2.2.2.2.1.1 |
atmElanIdThe Elan index.ro INTEGER .1.3.6.1.4.1.930.2.2.2.2.1.1.1 |
atmElanPvcInUcastPktThe number of unicast packet that is received from
this Elan PVC.ro INTEGER .1.3.6.1.4.1.930.2.2.2.2.1.1.2 |
atmElanPvcInMcastPktThe number of multicast packet that is received from
this Elan PVC.ro INTEGER .1.3.6.1.4.1.930.2.2.2.2.1.1.3 |
atmElanPvcOutUcastPktThe number of unicast packet that is transmitted from
this Elan PVC.ro INTEGER .1.3.6.1.4.1.930.2.2.2.2.1.1.4 |
atmElanPvcOutMcastPktThe number of unicast packet that is transmitted from
this Elan PVC.ro INTEGER .1.3.6.1.4.1.930.2.2.2.2.1.1.5 |
atmPvcStatusMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.2.3 |
atmPvcStatusTableTmp ATM InterSwitch PVC status SEQUENCE OF AtmPvcStatusEntry .1.3.6.1.4.1.930.2.2.2.3.1 |
atmPvcStatusEntryATM PVC status.
The PVC circuit ID is used as
the index of the object. AtmPvcStatusEntry .1.3.6.1.4.1.930.2.2.2.3.1.1 |
atmPvcCktIdThis field is the index of the circuit.ro INTEGER .1.3.6.1.4.1.930.2.2.2.3.1.1.1 |
atmPvcElanIdThis field is the index of the elan this circuit belongs to.ro INTEGER .1.3.6.1.4.1.930.2.2.2.3.1.1.2 |
atmPvcRemoteSwitchInfoValidThis field is based on the aging timer of a remote
switch. If the local switch has not received any
packets from the remote switch for a period of time,
then it is declared as non-valid.
1 = non-valid
2 = valid (normal state of operation).ro Enumeration .1.3.6.1.4.1.930.2.2.2.3.1.1.3 |
atmPvcRemoteSwitchMacAddressThis field lists the remote switch's MAC address.
If the atmInterSwitchPvcRemoteSwitchInfoValid object
is 1, then this field contains the valid info.
Otherwise, this field contains the last learned info.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.930.2.2.2.3.1.1.4 |
atmPvcRemoteSwitchPvcStatusThis field is set if the remote switch receives packets from
this switch. If atmInterSwitchPvcRemoteSwitchInfoValid
objeect is 1, then this field contains the valid info.
Otherwise, this field contains the last learned info.ro Enumeration .1.3.6.1.4.1.930.2.2.2.3.1.1.5 |
atmPvcSTPStateThis field indicates the STP port state of the circuit.ro Enumeration .1.3.6.1.4.1.930.2.2.2.3.1.1.6 |
atmPvcRemoteElanIdThis field indicates the elan ID of the circuit.ro INTEGER .1.3.6.1.4.1.930.2.2.2.3.1.1.7 |
atmPvcRemoteMcpIpAddressThis is the remote mcp ip address.ro IpAddress .1.3.6.1.4.1.930.2.2.2.3.1.1.8 |
atmSigMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.2.4 |
cnCurPtptConnsThis counter counts the number of current point-to-point
calls of the switch.ro INTEGER .1.3.6.1.4.1.930.2.2.2.4.1 |
cnCurPtmptConnsThis counter counts the number of current
point-to-multipoint calls of the switch.ro INTEGER .1.3.6.1.4.1.930.2.2.2.4.2 |
cnCurActiveConnsThis counter counts the number of current
active calls of the switch.ro INTEGER .1.3.6.1.4.1.930.2.2.2.4.3 |
cnCurPortConnsTableThis table contains the point-to-point,
point-to-multipoint and active calls per port
for all the atm ports in the switch. SEQUENCE OF CnCurPortConnsEntry .1.3.6.1.4.1.930.2.2.2.4.4 |
cnCurPortConnsEntryThis entry contains the point-to-point,
point-to-multipoint and active calls per port. CnCurPortConnsEntry .1.3.6.1.4.1.930.2.2.2.4.4.1 |
cnCurPortConnsPtptConnsThis entry counts the number of current point-to-point
calls per port.ro INTEGER .1.3.6.1.4.1.930.2.2.2.4.4.1.1 |
cnCurPortConnsPtmptConnsThis entry counts the number of current point-to-multipoint
calls per port.ro INTEGER .1.3.6.1.4.1.930.2.2.2.4.4.1.2 |
cnCurPortConnsActiveConnsThis entry counts the number of current active
calls per port.ro INTEGER .1.3.6.1.4.1.930.2.2.2.4.4.1.3 |
atmCardMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.2.5 |
atmCardOperTableATM Card Operational values SEQUENCE OF AtmCardOperEntry .1.3.6.1.4.1.930.2.2.2.5.1 |
atmCardOperEntryATM Card Operational values.
Each entry is indexed by card number AtmCardOperEntry .1.3.6.1.4.1.930.2.2.2.5.1.1 |
atmCardOperCardIdThis field is the card indexro CardId .1.3.6.1.4.1.930.2.2.2.5.1.1.1 |
atmCardOperExtClockSourceThis field indicates the operational external
clock source. The following value is read-only:
0 = Local Oscillator, 1..N = ATM port id for
external clock source. This object only applies
to ATM MDA modules with SM, MM, or UTP media types.ro INTEGER .1.3.6.1.4.1.930.2.2.2.5.1.1.2 |
atmStatusEnqMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.2.6 |
cnStsEnqPTPCallsThe number of current point-to-point calls
in the status enquiry queue of the switch.ro INTEGER .1.3.6.1.4.1.930.2.2.2.6.1 |
cnStsEnqActivePartiesThe number of current active parties in
the status enquiry queue of the switch.
(This includes point- to-multi-point calls).ro INTEGER .1.3.6.1.4.1.930.2.2.2.6.2 |
cnStsEnqSentThe total number of status enquiry requests sent.ro INTEGER .1.3.6.1.4.1.930.2.2.2.6.3 |
cnStsEnqCfmsRecvdThe number of current status messages
(in response to status enquiry) received.ro INTEGER .1.3.6.1.4.1.930.2.2.2.6.4 |
cnStsEnqRetriedThe total number of status enquiry commands retried.ro INTEGER .1.3.6.1.4.1.930.2.2.2.6.5 |
cnStsEnqTimeOutsThe total number of status enquiry commands
timed out i.e The number of calls for which
status (in response to status enquiry) was
not received.ro INTEGER .1.3.6.1.4.1.930.2.2.2.6.6 |
cnStsEnqQueueSizeThe size of the status enquiry queue.ro INTEGER .1.3.6.1.4.1.930.2.2.2.6.7 |
cnStsEnqCallsClearedThe number of calls cleared by status enquiry.ro INTEGER .1.3.6.1.4.1.930.2.2.2.6.8 |