CENTILLION-LECS-MPOA-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CENTILLION-LECS-MPOA-MIB.
37
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
cnLecsMpoaGroup OBJECT IDENTIFIER .1.3.6.1.4.1.930.2.2.3.6 |
IMPORTS Unknown .1.3.6.1.4.1.930.2.2.3.6 |
cnLecsMpoaMpcTableThe Bay Networks proprietary LECS MPC Table.
This table contains configuration information
for all LECS Mpoa Mpcs this agent manages. SEQUENCE OF CnLecsMpoaMpcEntry .1.3.6.1.4.1.930.2.2.3.6.1 |
cnLecsMpoaMpcEntryEach entry contains LECS MPC information
for all LECS this agent manages. CnLecsMpoaMpcEntry .1.3.6.1.4.1.930.2.2.3.6.1.1 |
cnLecsMpoaMpcIndexA value which uniquely identifies this conceptual
row in the cnLecsMpoaMpcTable.rw MpcIndex (MPOA-MIB) .1.3.6.1.4.1.930.2.2.3.6.1.1.1 |
cnLecsMpoaMpcRowStatusThis object allows creation and deletion of Lecs
MPOA Clients.
Within each conceptual cnLecsMpoaMpcTable row, writable
objects may be modified, regardless of the value of
cnLecsMpoaMpcRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.930.2.2.3.6.1.1.2 |
cnLecsMpoaMpcCtrlAtmAddrThe MPC's Control ATM Address. There exists one Control ATM
Address per MPC, therefore, the value of this entry is unique
within the table. The control ATM Address is the address which
is used by the MPC in its requests to the MPS. The value of
this object should not change, once created.rw AtmConfigAddr (MPOA-MIB) .1.3.6.1.4.1.930.2.2.3.6.1.1.3 |
cnLecsMpoaMpcSCSetupFrameCountThis represents the Short-cut setup frame count
parameter.
This value is frames measured over mpcSCFrameTime
seconds.
Flow detection is protocol independent. i.e. all network layers
lecsMpcProtocolEntries for this MPC share the flow rate
specification.
A value of 1 causes all flows to initiate resolution/shortcut.
process.rw Integer32 .1.3.6.1.4.1.930.2.2.3.6.1.1.4 |
cnLecsMpoaMpcSCSetupFrameTimeShort-cut setup frame time, in seconds.rw Integer32 .1.3.6.1.4.1.930.2.2.3.6.1.1.5 |
cnLecsMpoaMpcInitialRetryTimeThis is the initial value for the retry time out period used
for timing out MPOA Resolution Requests in seconds. Retry time
consists of this initial time-out and a retry muliplier. If a
response is not received, then another request is sent with a
timeout of retry time * retry time maximum seconds, or until
cnLecsMpoaMpcRetryTimeMaximum.rw Integer32 .1.3.6.1.4.1.930.2.2.3.6.1.1.6 |
cnLecsMpoaMpcRetryTimeMaximumCumulative max value for Retry Time.
Retries are attempted at intervals determined by the
algorithm descrived in the definition of
cnLecsMpoaMpcInitalRetryTime.rw Integer32 .1.3.6.1.4.1.930.2.2.3.6.1.1.7 |
cnLecsMpoaMpcHoldDownTimeHold Down Time
Minimum time to wait before reinitiating
a failed resolution attempt. Default is
cnLecsMpoaMpcRetryTimeMaximum * 4.rw Integer32 .1.3.6.1.4.1.930.2.2.3.6.1.1.8 |
cnLecsMpoaMpcDefaultTLVIndicates whether this CnLecsMpoaMpcEntry
contains the default TLV settings. Only one
entry in the table can have the default
setttings.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.930.2.2.3.6.1.1.9 |
cnLecsMpoaMpsTableThe Bay Networks proprietary LECS MPS Table.
This table contains configuration information
for all LECS Mpoa Mpss this agent manages. SEQUENCE OF CnLecsMpoaMpsEntry .1.3.6.1.4.1.930.2.2.3.6.2 |
cnLecsMpoaMpsEntryEach entry contains LECS MPS information
for all LECS this agent manages. CnLecsMpoaMpsEntry .1.3.6.1.4.1.930.2.2.3.6.2.1 |
cnLecsMpoaMpsIndexA value which uniquely identifies this conceptual
row in the cnLecsMpoaMpsTable.rw MpsIndex (MPOA-MIB) .1.3.6.1.4.1.930.2.2.3.6.2.1.1 |
cnLecsMpoaMpsRowStatusThis object allows creation and deletion of Lecs
MPOA Clients.
Within each conceptual cnLecsMpoaMpsTable row, writable
objects may be modified, regardless of the value of
cnLecsMpoaMpsRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.930.2.2.3.6.2.1.2 |
cnLecsMpoaMpsCtrlAtmAddrThe MPS's Control ATM Address. There exists one
Control ATM Address per MPS, therefore, the value
of this entry is unique within the table.rw AtmConfigAddr (MPOA-MIB) .1.3.6.1.4.1.930.2.2.3.6.2.1.3 |
cnLecsMpoaMpsKeepAliveTimeKeep-alive time is max interval between
the MPS sending MPOA Keep-Alives in seconds.rw Integer32 .1.3.6.1.4.1.930.2.2.3.6.2.1.4 |
cnLecsMpoaMpsKeepAliveLifeTimeKeep-Alive Lifetime
The length of time an MPC may consider a Keep-Alive
valid in seconds. This value must be at least
three times the cnLecsMpoaMpsKeepAliveTime.rw Integer32 .1.3.6.1.4.1.930.2.2.3.6.2.1.5 |
cnLecsMpoaMpsInitialRetryTimeInitial value in seconds for the
MPOA retry mechanism.rw Integer32 .1.3.6.1.4.1.930.2.2.3.6.2.1.6 |
cnLecsMpoaMpsRetryTimeMaximumCumulative max value in seconds
for Retry Time.rw Integer32 .1.3.6.1.4.1.930.2.2.3.6.2.1.7 |
cnLecsMpoaMpsGiveupTimeGive Up Time.
Minimum time in seconds to wait before giving up on a
pending resolution request.rw Integer32 .1.3.6.1.4.1.930.2.2.3.6.2.1.8 |
cnLecsMpoaMpsDefaultHoldingTimeDefault Holding Time in minutes.
The default Holding Time used in NHRP
Resolution Replies. An egress MPS may use
local information to determine a more
appropriate Holding Time.rw Integer32 .1.3.6.1.4.1.930.2.2.3.6.2.1.9 |
cnLecsMpoaMpsDefaultTLVIndicates whether this CnLecsMpoaMpsEntry
contains the default TLV settings. Only one
entry in the table can have the default
settings.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.930.2.2.3.6.2.1.10 |
cnLecsMpoaMpcProtocolTableThe Bay Networks proprietary Protocol LECS MPS Table.
This table contains the protocal configuration information
for all LECS this agent manages. SEQUENCE OF CnLecsMpoaMpcProtocolEntry .1.3.6.1.4.1.930.2.2.3.6.3 |
cnLecsMpoaMpcProtocolEntryEach entry contains Protocol LECS MPC information
for all LECS this agent manages. CnLecsMpoaMpcProtocolEntry .1.3.6.1.4.1.930.2.2.3.6.3.1 |
cnLecsMpoaMpcProtocolIndexA value which uniquely identifies this conceptual
row in the cnLecsMpoaMpcProtocolTable.ro MpcIndex (MPOA-MIB) .1.3.6.1.4.1.930.2.2.3.6.3.1.1 |
cnLecsMpoaMpcFlowDetectProtocolThe protocol on which flow detection is performed.
This value is an index into the Protocol Table.ro InternetworkAddrType (MPOA-MIB) .1.3.6.1.4.1.930.2.2.3.6.3.1.2 |
cnLecsMpoaMpcProtocolRowStatusThis object allows creation and deletion of Lecs
MPOA Protocol.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.930.2.2.3.6.3.1.3 |
cnLecsMpoaMpcProtocolEnableThis object enables or disables mpoa for a particular protocol
for this entry in the table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.930.2.2.3.6.3.1.4 |
cnLecsMpoaMpsProtocolTableThe Bay Networks proprietary Protocol LECS MPS Table.
This table contains the protocal configuration information
for all LECS this agent manages. SEQUENCE OF CnLecsMpoaMpsProtocolEntry .1.3.6.1.4.1.930.2.2.3.6.4 |
cnLecsMpoaMpsProtocolEntryEach entry contains Protocol LECS MPs information
for all LECS this agent manages. CnLecsMpoaMpsProtocolEntry .1.3.6.1.4.1.930.2.2.3.6.4.1 |
cnLecsMpoaMpsProtocolIndexA value which uniquely identifies this conceptual
row in the cnLecsMpoaMpsProtocolTable.ro MpsIndex (MPOA-MIB) .1.3.6.1.4.1.930.2.2.3.6.4.1.1 |
cnLecsMpoaMpsInternetworkLayerProtocolThe protocol on which flow detection is performed.
This value is an index into the Protocol Table.ro InternetworkAddrType (MPOA-MIB) .1.3.6.1.4.1.930.2.2.3.6.4.1.2 |
cnLecsMpoaMpsProtocolRowStatusThis object allows creation and deletion of Lecs
MPOA Protocol.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.930.2.2.3.6.4.1.3 |
cnLecsMpoaMpsProtocolEnableThis object enables or disables mpoa for a particular protocol
for this entry in the table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.930.2.2.3.6.4.1.4 |