CADANT-CMTS-IF3-MIB
AI MIB Summary
The CADANT-CMTS-IF3-MIB monitors and manages physical interface statistics, error counters, and operational states for Cadant Cable Modem Termination System (CMTS) hardware utilizing the IF3 (Interface Type 3) architecture. It provides granular visibility into link-layer performance metrics, including interface status, octet/packet counts, and collision or discard errors, essential for troubleshooting CMTS port connectivity and throughput issues.
This MIB module contains Cadant IF3 MIB information.
Main OID:
cadCmtsIf3Mib.1.3.6.1.4.1.4998.1.1.110.1
116
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
116 total| Object Name |
|---|
cadCmtsIf3MibThis MIB module contains Cadant IF3 MIB information. MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.110.1 |
IMPORTSThis MIB module contains Cadant IF3 MIB information. of cadRccStatusId from .1.3.6.1.4.1.4998.1.1.110.1 |
cadCmtsIf3MibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.110.1.1 |
cadCmStatusMdCfgTableAt MAC Domain creation time with one row per cadCmStatusEventTypeCode
value for the new MAC Domain. These rows MUST be deleted by the CMTS
when the MAC Domain is deleted. SEQUENCE OF CadCmStatusMdCfgEntry .1.3.6.1.4.1.4998.1.1.110.1.1.1 |
cadCmStatusMdCfgEntryA conceptual row containing information about the
Cadant CM Status Mac domain configuration. CadCmStatusMdCfgEntry .1.3.6.1.4.1.4998.1.1.110.1.1.1.1 |
cadCmStatusEventTypeCodeThis field contains a unique code which
describes the event condition. Refer to Table
6-56 in MULPI. CmStatusEventTypeCode .1.3.6.1.4.1.4998.1.1.110.1.1.1.1.1 |
cadCmStatusEventDescriptionTextual description of event. This will
default to a description that is generated by the CMTS
but will be set to the Event Description which is sent
from the CM, if applicable.ro DisplayString .1.3.6.1.4.1.4998.1.1.110.1.1.1.1.2 |
cadCmStatusEventEnabledThis attribute represents the enable/disable
for a particular event for which status may be
reported via the CM-STATUS message.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.1.1.3 |
cadCmStatusMaxEventHoldoffThe CM-STATUS reporting mechanism includes a
random holdoff prior to transmission of status report
messages. This attribute is the maximum value of that
holdoff timer to be used by the CM when determining
when to transmit a CM-STATUS message.rw INTEGER .1.3.6.1.4.1.4998.1.1.110.1.1.1.1.4 |
cadCmStatusMaxNumReportsMaximum Number of Reports per event:
0: Unlimited number of reports
1-255: Maximum number of reports for an event type
reporting transaction.rw INTEGER .1.3.6.1.4.1.4998.1.1.110.1.1.1.1.5 |
cadCmtsCmCtrlStatusOverrideCfgTableA Table containing information about the
Cadant CM control status override configuration. SEQUENCE OF CadCmtsCmCtrlStatusOverrideCfgEntry .1.3.6.1.4.1.4998.1.1.110.1.1.2 |
cadCmtsCmCtrlStatusOverrideCfgEntryA conceptual row containing information about the
Cadant CM control status override configuration. CadCmtsCmCtrlStatusOverrideCfgEntry .1.3.6.1.4.1.4998.1.1.110.1.1.2.1 |
cadCmtsCmCtrlStatusMacAddressThe CM Mac Address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.1 |
cadCmtsCmCtrlStatusEventTypeCodeThis field contains a unique code which
describes the event condition. Refer to Table
6-56 in MULPI. CmStatusEventTypeCode .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.2 |
cadCmtsCmCtrlStatusOverrideEnabledThis attribute can be used to override the
CM's primary channel MDD with regard to enabling a
particular event type.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.3 |
cadCmtsCmCtrlStatusOverrideDsChListList of DS channel IDs to which this override
applies.rw OCTET STRING .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.4 |
cadCmtsCmCtrlStatusOverrideUsChListList of US channel IDs to which this override
applies.rw OCTET STRING .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.5 |
cadCmtsCmCtrlStatusRowStatusRow Status for this tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.6 |
cadCmStatusCountsTableA Table containing information about the
Cadant CM status counter. SEQUENCE OF CadCmStatusCountsEntry .1.3.6.1.4.1.4998.1.1.110.1.1.3 |
cadCmStatusCountsEntryA conceptual row containing information about the
Cadant CM status counter. CadCmStatusCountsEntry .1.3.6.1.4.1.4998.1.1.110.1.1.3.1 |
cadCmStatusCountsCmMacAddressMAC Address of CM which reported this event. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.1 |
cadCmStatusCountsEventTypeCodeThis field contains a unique code which
describes the event condition. Refer to Table
6-56 in MULPI. CmStatusEventTypeCode .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.2 |
cadCmStatusCountsEventDescriptionTextual description of event. This will
default to a description that is generated by the CMTS
but will be set to the Event Description which is sent
from the CM, if applicable.ro DisplayString .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.3 |
cadCmStatusCountsEventCountCount of the number of times that the
cadCmStatusEventTypeCode has been reported for this
CM.ro Counter64 .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.4 |
cadCmStatusCountsReportedDsChIfIndexifIndex corresponding to the reported DCID.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.5 |
cadCmStatusCountsReportedUsChIfIndexifIndex corresponding to the reported UCID.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.6 |
cadCmStatusCountsReportedDsidDSID as reported by CM.ro Dsid (DOCS-IF3-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.7 |
cadCmStatusCountsTimeStampTimeStamp when this row was created.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.8 |
cadCmtsCmRepairParamTableA table that contains information on the
CM repair parameters. SEQUENCE OF CadCmtsCmRepairParamEntry .1.3.6.1.4.1.4998.1.1.110.1.1.4 |
cadCmtsCmRepairParamEntryA conceptual row containing information about the
CM repair parameter. CadCmtsCmRepairParamEntry .1.3.6.1.4.1.4998.1.1.110.1.1.4.1 |
cadCmtsCmRepairEnabledWhen true(1), the CMTS will periodically
attempt to repair any unresolved topology and/or
partial service condition for each CM which has been
added to the CM problem list.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.4.1.1 |
cadCmtsCmRepairWindowStartTimeTime of day for beginning of CmRepair Window.rw HhMmSs .1.3.6.1.4.1.4998.1.1.110.1.1.4.1.2 |
cadCmtsCmRepairWindowEndTimeTime of day for end of CmRepair Window.rw HhMmSs .1.3.6.1.4.1.4998.1.1.110.1.1.4.1.3 |
cadCmtsCmRepairIntervalPeriod between repair attemts during repair
window.rw HhMmSs .1.3.6.1.4.1.4998.1.1.110.1.1.4.1.4 |
cadCmtsCmRegImpairedStatusTableA table that contains information on the
CM impaired status. SEQUENCE OF CadCmtsCmRegImpairedStatusEntry .1.3.6.1.4.1.4998.1.1.110.1.1.5 |
cadCmtsCmRegImpairedStatusEntryA conceptual row containing information about the
CM impaired status. CadCmtsCmRegImpairedStatusEntry .1.3.6.1.4.1.4998.1.1.110.1.1.5.1 |
cadCmtsCmRegImpairedReasonReason why CM is considered to be impaired. Reason codes
with lower integer values take precedence over reason codes
with higher values if multiple reasons apply to the same CM.
The unknownMdDsSgId reason is used whenever the MD-DS-SG-ID
reported in the B-INIT-RNG-REQ message is 0 and the CMTS
cannot otherwise determine which downstream service group
the CM is contained within.
The unknownMdUsSgId reason is used whenever the MD-DS-SG-ID
is known for the CM but the MD-US-SG cannot be determined
by the topology resolution process. This reason may indicate
an undiagnosed connectivity problem in the cable network whereby
the true connectivity does not match the provisioned connectivity.
It may also indicate one or more corrupted upstream channels.
The badRcs reason indicates that the CM was unable to tune to
and receive a downstream channel that is assigned to the CM
in the RCC. This may indicate an undiagnosed connectivity problem
or a CM receiver problem.
The badTcs reason indicates that CM was unable to successfully
range on one or more upstream channels that were assigned to
the CM in the TCC. This reason may indicate an undiagnosed
connectivity problem in the cable network whereby the true
connectivity does not match the provisioned connectivity.
It may also indicate one or more corrupted upstream channels.
This reason may also indicate that the supervision for one or
more upstream channels cannot be found within the RCS.
The qamFecLockFailure reason indicates that the CM has reported
that one or more previously known good downstream channels
has lost FEC lock. This reason supercedes unknownMdDsSgId.
The t4Timeout indicates that the CM has reported that it has
experienced a timeout event for DOCSIS timer T4
(Periodic Ranging opportunities interval).
The t3Timeout reason indicates that the CM has reported that
it has exceeded the maximum number of consecutive timeouts
of timer T3 (ranging response timer).
The usStationMaintFailure indicates that C4 has detected that
CM is experiencing periodic ranging failure.ro Enumeration .1.3.6.1.4.1.4998.1.1.110.1.1.5.1.1 |
cadCmtsCmRegImpairedFaultDetectedDate and time when impairment of CM was
first detected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.5.1.2 |
cadCmtsCmRegImpairedLastRepairAttemptDate and time when corrective action was
last attempted. If no action has not yet been attempted,
then this time should be the same as
cadCmtsCmRegImpairedFaultDetected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.5.1.3 |
cadCmtsCmRegImpairedLastRepairActionType of corrective action last attempted.
If no action has yet been attempted then
the value should be noAction.ro Enumeration .1.3.6.1.4.1.4998.1.1.110.1.1.5.1.4 |
cadCmtsCmRegImpairedIfIndexThis object indicates either a downstream or upstream channel is impaired.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.5.1.5 |
cadIf3CmtsCmUsStatusTableThis object defines status information of the CM
currently in use Upstream Logical Channels, as reported
by the CMTS. SEQUENCE OF CadIf3CmtsCmUsStatusEntry .1.3.6.1.4.1.4998.1.1.110.1.1.6 |
cadIf3CmtsCmUsStatusEntryThe conceptual row of cadIf3CmtsCmUsStatusTable. CadIf3CmtsCmUsStatusEntry .1.3.6.1.4.1.4998.1.1.110.1.1.6.1 |
cadIf3CmtsCmUsStatusChIfIndexThis attribute is a key that represents the ifIndex
of the upstream interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.6.1.1 |
cadIf3CmtsCmUsStatusModulationTypeThis attribute represents the modulation type currently
used by this upstream channel.ro DocsisUpstreamType .1.3.6.1.4.1.4998.1.1.110.1.1.6.1.2 |
cadIf3CmtsCmUsStatusIsMutedThis attribute has a value 'true' to indicate that
the CM's upstream channel has been muted via
CM-CTRL-REQ/CM-CTRL-RSP message exchange.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.6.1.11 |
cadIf3CmtsCmUsStatusRangingStatusThis attribute denotes the ranging state of the CM.ro RangingState (DOCS-IF3-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.6.1.12 |
cadRccStatusTableThe RCC Status object provides a read-only view of
the statically-configured (from the RccCfg object)
and dynamically-created RCCs.
The CMTS creates an RCC Status instance for each unique
MAC Domain Cable Modem Service Group (MD-CM-SG) to
which it signals an RCC to the CM. SEQUENCE OF CadRccStatusEntry .1.3.6.1.4.1.4998.1.1.110.1.1.7 |
cadRccStatusEntryThe conceptual row of cadRccStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the RCC is configured. CadRccStatusEntry .1.3.6.1.4.1.4998.1.1.110.1.1.7.1 |
cadRccStatusRcpIdThis key represents the RCP-ID to which this instance
applies. RcpId (DOCS-IF3-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.1 |
cadRccStatusIdThis key represents an RCC combination for a particular
RcpId either from an RCC configuration object
or a CMTS-determined RCC and is unique per combination
of MAC Domain IfIndex and RcpId. Unsigned32 .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.2 |
cadRccStatusRccCfgIdThis attribute identifies an RCC-Configured combination
from which this instance was defined. If nonzero,
it corresponds to the RccCfg instance from which
the RCC was created. Zero means that the RCC was dynamically
created by the CMTS.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.3 |
cadRccStatusValidityCodeThis attribute indicates whether the RCC instance
of this object is valid or not. An RCC Status instance
from a configured or a dynamic RCC could become invalid,
for example, due changes in the topology.ro Enumeration .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.4 |
cadRccStatusValidityCodeTextThis attribute contains the CMTS vendor-specific
log information from the Receive Channel Configuration
Status encoding.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.5 |
cadRccStatusDsChSetIdThis object contains the ID for the downstream channel set used by this RCC.
It is only unique in association with a specific MAC domain.ro ChSetId (DOCS-IF3-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.6 |
cadRccStatusChannelCountThis object provides the number of downstream channels provided by a modem using this RCC.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.7 |
cadIf3UsChSetTableThis object defines a set of upstream channels. These
channel sets may be associated with TCSID. SEQUENCE OF CadIf3UsChSetEntry .1.3.6.1.4.1.4998.1.1.110.1.1.8 |
cadIf3UsChSetEntryThe conceptual row of cadIf3UsChSetTable.
The ifIndex key corresponds to the MAC Domain interface
where the upstream channel set is defined. CadIf3UsChSetEntry .1.3.6.1.4.1.4998.1.1.110.1.1.8.1 |
cadIf3UsChIfIndexThis object is associated with an upstream channel ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.8.1.1 |
cadIf3DsChSetTableThis object defines a set of downstream channels. These
channel sets may be associated with RCSID. SEQUENCE OF CadIf3DsChSetEntry .1.3.6.1.4.1.4998.1.1.110.1.1.9 |
cadIf3DsChSetEntryThe conceptual row of cadIf3DsChSetTable.
The ifIndex key corresponds to the MAC Domain interface
where the downstream channel set is defined. CadIf3DsChSetEntry .1.3.6.1.4.1.4998.1.1.110.1.1.9.1 |
cadIf3DsChIfIndexThis object is associated with an downstream channel ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.9.1.1 |
cadIf3CsSummaryTableThis table contains counts of the modems using a particular upstream
or downstream channel set. It is used to construct SEQUENCE OF CadIf3CsSummaryEntry .1.3.6.1.4.1.4998.1.1.110.1.1.10 |
cadIf3CsSummaryEntryThe conceptual row of the cadIf3CsSummary table that contains the
the count of modems using this channel set.deprecated CadIf3CsSummaryEntry .1.3.6.1.4.1.4998.1.1.110.1.1.10.1 |
cadIf3CsDirThe direction of the channel set associated with this modem count.deprecated IfDirection (DOCS-IF3-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.1 |
cadIf3CsIdThe channel set associated with this modem count.deprecated ChSetId (DOCS-IF3-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.2 |
cadIf3CsNumOtherThe number of modems on this channel set in state other(1)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.3 |
cadIf3CsNumInitRangingThe number of modems on this channel set in state initialRanging(2)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.4 |
cadIf3CsNumRangingCompleteThe number of modems on this channel set in state rangingAutoAdjComplete(4)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.5 |
cadIf3CsNumStartEaeThe number of modems on this channel set in state startEae(10)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.6 |
cadIf3CsNumStartDhcpv4The number of modems on this channel set in state startDhcpv4(11)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.7 |
cadIf3CsNumStartDhcpv6The number of modems on this channel set in state startDhcpv6(12)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.8 |
cadIf3CsNumDhcpv4CompleteThe number of modems on this channel set in state dhcpv4Complete(5)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.9 |
cadIf3CsNumDhcpv6CompleteThe number of modems on this channel set in state dhcpv6Complete(13)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.10 |
cadIf3CsNumStartCfgFileDownloadThe number of modems on this channel set in state startConfigFileDownload(14)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.11 |
cadIf3CsNumCfgFileDownloadCompleteThe number of modems on this channel set in state configFileDownloadComplete(15)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.12 |
cadIf3CsNumStartRegistrationThe number of modems on this channel set in state startRegistration(16)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.13 |
cadIf3CsNumRegistrationCompleteThe number of modems on this channel set in state registrationComplete(6)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.14 |
cadIf3CsNumOperationalThe number of modems on this channel set in state operational(8)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.15 |
cadIf3CsNumBpiInitThe number of modems on this channel set in state bpiInit(9)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.16 |
cadIf3CsNumForwardingDisabledThe number of modems on this channel set in state forwardingDisabled(17)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.17 |
cadIf3CsNumRfMuteAllThe number of modems on this channel set in state rfMuteAll(18)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.18 |
cadIf3CsNumTotalThe total count of cable modems on this channel setrodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.19 |
cadIf3CsNumRangingAbortedThe number of modems on this channel set in state rangingAborted(3)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.20 |
cadIf3CsNumRangFlapsThe number of times a CM on this channel set has reset in Ranging states.rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.21 |
cadIf3CsNumProvFlapsThe number of times a CM on this channel set has reset in Provisioning states.rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.22 |
cadIf3CsNumRegFlapsThe number of times a CM on this channel set has reset in Registered state.rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.23 |
cadIf3ChsSummary OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.110.1.1.11 |
cadIf3ChsNumOtherThe number of modems on this chassis in state other(1)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.3 |
cadIf3ChsNumInitRangingThe number of modems on this chassis in state initialRanging(2)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.4 |
cadIf3ChsNumRangingCompleteThe number of modems on this chassis in state rangingAutoAdjComplete(4)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.5 |
cadIf3ChsNumStartEaeThe number of modems on this chassis in state startEae(10)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.6 |
cadIf3ChsNumStartDhcpv4The number of modems on this chassis in state startDhcpv4(11)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.7 |
cadIf3ChsNumStartDhcpv6The number of modems on this chassis in state startDhcpv6(12)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.8 |
cadIf3ChsNumDhcpv4CompleteThe number of modems on this chassis in state dhcpv4Complete(5)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.9 |
cadIf3ChsNumDhcpv6CompleteThe number of modems on this chassis in state dhcpv6Complete(13)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.10 |
cadIf3ChsNumStartCfgFileDownloadThe number of modems on this chassis in state startConfigFileDownload(14)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.11 |
cadIf3ChsNumCfgFileDownloadCompleteThe number of modems on this chassis in state configFileDownloadComplete(15)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.12 |
cadIf3ChsNumStartRegistrationThe number of modems on this chassis in state startRegistration(16)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.13 |
cadIf3ChsNumRegistrationCompleteThe number of modems on this chassis in state registrationComplete(6)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.14 |
cadIf3ChsNumOperationalThe number of modems on this chassis in state operational(8)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.15 |
cadIf3ChsNumBpiInitThe number of modems on this chassis in state bpiInit(9)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.16 |
cadIf3ChsNumForwardingDisabledThe number of modems on this chassis in state forwardingDisabled(17)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.17 |
cadIf3ChsNumRfMuteAllThe number of modems on this chassis in state rfMuteAll(18)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.18 |
cadIf3ChsNumTotalThe total count of cable modems on this chassisrodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.19 |
cadIf3ChsNumRangingAbortedThe number of modems on this chassis in state rangingAborted(3)rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.20 |
cadIf3ChsNumRangFlapsThe number of times a CM on this chassis set has reset in a ranging state.rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.21 |
cadIf3ChsNumProvFlapsThe number of times a CM on this chassis has reset in a provisioning state.rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.22 |
cadIf3ChsNumRegFlapsThe number of times a CM on this chassis has reset in a registered state.rodeprecated Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.11.23 |
cadIfCmtsCmFailedProfStatusTableA table that contains information on the
CM impaired status (partial channel condition). SEQUENCE OF CadIfCmtsCmFailedProfStatusEntry .1.3.6.1.4.1.4998.1.1.110.1.1.12 |
cadIfCmtsCmFailedProfStatusEntryA conceptual row containing information about the
CM impaired OFDM profile status. CadIfCmtsCmFailedProfStatusEntry .1.3.6.1.4.1.4998.1.1.110.1.1.12.1 |
cadIfCmtsCmFailedProfMacAddressThe MAC address of the modem experiencing the failure. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.12.1.1 |
cadIfCmtsCmFailedProfIfIndexThis is the ifIndex of the channel associated with the
Failed profile.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4998.1.1.110.1.1.12.1.2 |
cadIfCmtsCmFailedProfIdThe profile number of this profile plus one.
Profile IDs zero and 255 result in partial service,
not a partial channel condition, so they are not in
this table. Integer32 .1.3.6.1.4.1.4998.1.1.110.1.1.12.1.3 |
cadIfCmtsCmFailedProfReasonReason why a profile is considered to be impaired.
The lostFecLock reason is used when the CM sends a
DS OFDM profile failure CM-STATUS message for an OFDM
channel and profile. This is sent when the CM detects
excessive errors on a profile. For an OFDMA channel, it
indicates excessive errors in received packets from the CM. Enumeration .1.3.6.1.4.1.4998.1.1.110.1.1.12.1.4 |
cadIfCmtsCmFailedProfFaultDetectedDate and time when impairment of CM was
first detected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.110.1.1.12.1.5 |