BCS-IDENT-MIB
The SMIv2 MIB module for the MOTOROLA BCS common ident objects. The MIB Tree for this is shown below.
Main OID:
gi.1.3.6.1.4.1.1166
152
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
152 total| Object Name |
|---|
giThe SMIv2 MIB module for the MOTOROLA BCS common ident objects. The MIB Tree for this is shown below. MODULE-IDENTITY .1.3.6.1.4.1.1166 |
giproducts OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1 |
acc4000d OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.1 |
anicd OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.2 |
item1000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.4 |
irt1000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.5 |
nc1500 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.6 |
om1000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.7 |
im1000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.8 |
mps OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.9 |
rpd1000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.10 |
acpStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.11 |
heartbeat OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.12 |
entitlementKey OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.13 |
arpd OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.14 |
svom OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.15 |
svm OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.16 |
erm OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.17 |
surfBbnh OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.18 |
sb2100 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.19 |
sb2100D OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.20 |
sb2000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.21 |
saDANIS OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.30 |
apex OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.31 |
rem OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.32 |
mpe OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.33 |
spe OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.34 |
ne2000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.35 |
apex1500 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.36 |
agb OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.37 |
ne2500 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.38 |
hdd2000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.40 |
merlin OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.50 |
rsr OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.60 |
gsrm OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.61 |
gom OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.62 |
b3 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.63 |
adm OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.64 |
sem OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.70 |
ecmg OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.71 |
bsiAdapter OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.72 |
oles OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.73 |
ne OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.74 |
tmxCommTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.75 |
drmenginekskdc OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.76 |
drmenginerte OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.77 |
drmengineecmg OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.78 |
drmengineskgpkg OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.79 |
tmx OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.80 |
prs OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.81 |
se2000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.82 |
dem OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.83 |
ncs OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.84 |
ucs OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.85 |
lmm OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.86 |
se4000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.87 |
rc OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.88 |
netSentry OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.99 |
sdm OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.100 |
hfcEms OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.101 |
bnc OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.102 |
drmenginecm OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.103 |
stdc OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.104 |
tview OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.105 |
ponOa OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.150 |
mwtea200 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.151 |
bti OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.200 |
rfModMIB OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.201 |
btiIntMIB OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.202 |
sg4000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.203 |
ponEm870 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.210 |
rpa OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.250 |
rpc OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.251 |
dct5000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.300 |
dct5100 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.301 |
dct5200 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.302 |
edfaMIB OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.311 |
corvusMIB OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.312 |
oa600 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.313 |
dsr350f OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.321 |
cableCard OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.350 |
radd6000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.400 |
cs1000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.401 |
kls OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.402 |
dac6000 OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.403 |
sdi OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.404 |
cpms OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.405 |
ap OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.406 |
ps OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.407 |
motoIPNSprodID OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.450 |
ird4500x OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.610 |
ird4520x OBJECT IDENTIFIER .1.3.6.1.4.1.1166.1.620 |
giproxies OBJECT IDENTIFIER .1.3.6.1.4.1.1166.3 |
gicommon OBJECT IDENTIFIER .1.3.6.1.4.1.1166.4 |
identity OBJECT IDENTIFIER .1.3.6.1.4.1.1166.4.1 |
state OBJECT IDENTIFIER .1.3.6.1.4.1.1166.4.2 |
traps OBJECT IDENTIFIER .1.3.6.1.4.1.1166.4.3 |
logs OBJECT IDENTIFIER .1.3.6.1.4.1.1166.4.4 |
motproxies OBJECT IDENTIFIER .1.3.6.1.4.1.1166.6 |
bcs OBJECT IDENTIFIER .1.3.6.1.4.1.1166.7 |
bcsIdent OBJECT IDENTIFIER .1.3.6.1.4.1.1166.7.1 |
identSerialNumberThis contains the serial number of the unit. There is no specification of the internal format of the serial number. The serial number is entered into either permanent or non- volatile memory of the unit at the time of manufacture. Note - the unit itself supplies the serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.1 |
identChassisNumberThis contains the chassis number of the unit. This is applicable only to a limited number of products, currently, only the ITEM-1000. For products for which this is not applicable, this will be a null object. There is no specification of the internal format of the chassis number. The means by which any product determines its chassis number is to be determined by each individual product.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.2 |
identIfIndexThis contains the IfIndex of the OAM&P port.ro INTEGER .1.3.6.1.4.1.1166.7.1.3 |
identHardwareVersionThis contains a display string that defines the hardware version of this particular unit. There is no specification of the internal format of the hardware version. The hardware version is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.4 |
identHardwareFeaturesThis contains a display string that defines the features of this particular unit. There is no specification of the internal format of the hardware features. The hardware features is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.5 |
identInventoryCodeThis contains a display string that defines the inventory code for this unit. Once an inventory code has been set, it should be kept in non-volatile memory. The unit should only allow this object to be set when it is in the 'configuration' mode. There is no specification of the internal format of the inventory Code.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.6 |
identSoftwareVersionThis contains a display string that defines the current version of the software for this unit. The format of the software version is a fully qualified directory name. This value is received by a unit as within a BOOTP response from the BOOTP server. It is available to the network manager for applications that track the installed software. Once the software version has been set, it should be kept in non-volatile memory.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.7 |
identLocationAreaThis is different from the MIB II sysLocation variable as it contains only the location area and does not describe the precise location. This contains a display string that defines the area in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.8 |
identLocationRackThis contains a display string that defines the rack in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.9 |
identLocationShelfThis contains a display string that defines the shelf in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.10 |
identMIBVersionThe version number of this MIB.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.11 |
identAgentVersionThe version number of the Agent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.12 |
identCommandThis is the command to be executed by the resource managed by the agent. The value unspecified is always returned on SNMP Get/GetNext while the resource is running. If the restart(1) command is given, currentlyRestarting(2) is returned while the resource is preparing to restart (reboot).rw Enumeration .1.3.6.1.4.1.1166.7.1.13 |
identIfExtensionTableThis table contains extensions to the MIB II ifTable which contains the definitions of all interfaces. An ifTable entry may be a board or just a port on a board. Any ifTable entry can have an extension in the identIfExtensionTable. The corrsponding entry in that table will have the identIfIndex = ifIndex. Within the ifTable the presence of such an entry is indicated by setting the variable ifSpecific to the OBJECT IDENTIFIER value of identIfExtensionTable. Otherwise iFSpecific is set to {0 0}. The ifType - other - is used for all board types not envisoned by MIB II. SEQUENCE OF IdentIfExtensionEntry .1.3.6.1.4.1.1166.7.1.14 |
identIfExtensionEntryAn entry (conceptual row) in the Board Table. IdentIfExtensionEntry .1.3.6.1.4.1.1166.7.1.14.1 |
identIfExtensionIndexSame value as ifIndex of MIB II for the same board.ro INTEGER .1.3.6.1.4.1.1166.7.1.14.1.1 |
identIfSerialNumberThis contains the serial number of the board. There is no specification of the internal format of the serial number. The serial number is entered into either permanent or non-volatile memory of the unit at the time of manufacture. Note - the unit itself supplies the serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.14.1.2 |
identIfHardwareVersionThis contains a display string that defines the version of this particular board. There is no specification of the internal format of the hardware version. The hardware version is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.14.1.3 |
identIfHardwareFeaturesThis contains a display string that defines the features of this particular board. There is no specification of the internal format of the hardware features. The hardware features is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.14.1.4 |
identIfInventoryCodeThis contains a display string that defines the inventory code for this board. This is an optional value; if there is no inventory code, The unit will respond with a null string. Once an inventory code has been set, it should be kept in non-volatile memory. The unit should only allow this object to be set when it is in the 'configuration' mode. There is no specification of the internal format of the inventory Code.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.14.1.5 |
identIfFirmwareVersion1Within a product, there may be several identifiers of such firmware, boot proms, kernel versions, flash versions, etc. This field (and the 3 that follow) are used to hold the identification of these items. These values must be entered into the board at the time of manufacturing. Unused fields are reported as null values. These fields are available to the network manager for applications that keep track of the firmware related identification. There is no specification of the internal format of firmware version identifiers.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.14.1.6 |
identIfFirmwareVersion2Firmware related identification field # 2.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.14.1.7 |
identIfFirmwareVersion3Firmware related identification field # 3.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.14.1.8 |
identIfFirmwareVersion4Firmware related identification field # 4ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.14.1.9 |
identIfSlotIdThis variable identifies the board slot.rw INTEGER .1.3.6.1.4.1.1166.7.1.14.1.10 |
identIfCommandThis is the command to be executed by the resource managed by the agent. The value unspecified(10 is always returned on SNMP Get/GetNext while the other values are set by the manager and executed by the resource.rw Enumeration .1.3.6.1.4.1.1166.7.1.14.1.11 |
identIfAdministrativeStateThe current Adminsitrative state of the interface as defined in ISO/IEC 10164-2.rw Enumeration .1.3.6.1.4.1.1166.7.1.14.1.12 |
identIfOperationalStateThe current Operational state of the interface as defined in ISO/IEC 10164-2ro Enumeration .1.3.6.1.4.1.1166.7.1.14.1.13 |
identIfAlarmStatusThis object defines the Alarm status of the interface as defined in ISO/IEC 10164-2 and state-machinerw Enumeration .1.3.6.1.4.1.1166.7.1.14.1.14 |
identIfAvailabilityStatusThis object controls the Availability status of the interface as defined in ISO/IEC 10164-2 and state-machinero Enumeration .1.3.6.1.4.1.1166.7.1.14.1.15 |
identIfSpecificThe object identifier of a board type specific extension to the ifTable if necessary. Otherwise, identIfSpecific is set to {0 0}.ro OBJECT IDENTIFIER .1.3.6.1.4.1.1166.7.1.14.1.16 |
identIfEntryStatusThis object is used to create, delete or modify a row in this table. To create a a new network element, this object is initially set to 'createRequest'. After completion of the configuration of the new entry, the manager must set the appropriate instance of this object to the value valid(1) or aborts, setting this object to invalid(4). This object must not be set to 'active' unless the following columnar objects exist in this row: identIfExtensionIndex identIfSerialNumber identIfHardwareVersion identIfInventoryCode identIfFirmwareVersion1 identIfSpecific To delete an existing entry in this table, the manager must set the appropriate instance of this object to the value invalid(4). Creation of an instance of this object has the effect of creating the supplemental object instances to complete the conceptual row. An existing instance of this entry cannot be created. If circumstances occur which cause an entry to become invalid, the agent modifies the value of the appropriate instance of this object to invalid(4). Whenever, the value of this object for a particular entry becomes invalid(4), the conceptual row for that instance may be removed from the table at any time, either immediately or subsequently.rw EntryStatus .1.3.6.1.4.1.1166.7.1.14.1.17 |
identUnitModelThis contains the model of the product. For example, the ITEM-1000 would contain 'ITEM1000'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1166.7.1.15 |
bcsLogs OBJECT IDENTIFIER .1.3.6.1.4.1.1166.7.4 |
bcsSimulcryptScs OBJECT IDENTIFIER .1.3.6.1.4.1.1166.7.7 |
bcsSimulcryptMux OBJECT IDENTIFIER .1.3.6.1.4.1.1166.7.8 |
bcsSimulcrypt OBJECT IDENTIFIER .1.3.6.1.4.1.1166.7.9 |
bcsDatabase OBJECT IDENTIFIER .1.3.6.1.4.1.1166.7.11 |
bcsRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.1166.7.12 |
bcsMsgGeneration OBJECT IDENTIFIER .1.3.6.1.4.1.1166.7.21 |
mea OBJECT IDENTIFIER .1.3.6.1.4.1.1166.8 |
addressablecontrol OBJECT IDENTIFIER .1.3.6.1.4.1.1166.9 |
acCommon OBJECT IDENTIFIER .1.3.6.1.4.1.1166.9.1 |
acSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.1166.9.2 |
acServices OBJECT IDENTIFIER .1.3.6.1.4.1.1166.9.3 |
acBsi OBJECT IDENTIFIER .1.3.6.1.4.1.1166.9.4 |
acOperations OBJECT IDENTIFIER .1.3.6.1.4.1.1166.9.5 |
acTopology OBJECT IDENTIFIER .1.3.6.1.4.1.1166.9.6 |
chsInternal OBJECT IDENTIFIER .1.3.6.1.4.1.1166.10 |
emLogin OBJECT IDENTIFIER .1.3.6.1.4.1.1166.10.1 |
radiusClient OBJECT IDENTIFIER .1.3.6.1.4.1.1166.10.2 |