ASKEY-DSLAM-LINK-AGGREGATION-CONTROL-PROTOCOL-MIB
Standard SNMP MIB module defining data structures for ASKEY-DSLAM-LINK-AGGREGATION-CONTROL-PROTOCOL-MIB.
Imported Objects
Objects
13 total| Object Name |
|---|
askeyLacpMib MODULE-IDENTITY .1.3.6.1.4.1.3646.1300.2.13 |
lacpGroupTable SEQUENCE OF LacpGroupEntry .1.3.6.1.4.1.3646.1300.2.13.1 |
lacpGroupEntryThis table describe the information of link aggreation. LacpGroupEntry .1.3.6.1.4.1.3646.1300.2.13.1.1 |
askeyLacpGroupIdThe LACP group ID. This ID expresses the aggregation of ports. The ports are linked aggregately have same group ID. INTEGER .1.3.6.1.4.1.3646.1300.2.13.1.1.1 |
askeyLacpGroupActivityThis object corresponds to the administrative values of Actor_State (43.4.2 [Part 3]) as transmitted by the Actor in LACPDUs of the second bit corresponds to bit 0 (LACP_Activity)rw Enumeration .1.3.6.1.4.1.3646.1300.2.13.1.1.2 |
askeyLacpGroupTimeoutThis object corresponds to the administrative values of Actor_State (43.4.2 [Part 3]) as transmitted by the Actor in LACPDUs of the first bit corresponds to bit 1 (LACP_Timeout)rw Enumeration .1.3.6.1.4.1.3646.1300.2.13.1.1.3 |
lacpPortTable SEQUENCE OF LacpPortEntry .1.3.6.1.4.1.3646.1300.2.13.2 |
lacpPortEntryThis table describe information of the uplink ports . LacpPortEntry .1.3.6.1.4.1.3646.1300.2.13.2.1 |
askeyLacpPortIdThe uplink port interface index. InterfaceIndex .1.3.6.1.4.1.3646.1300.2.13.2.1.1 |
askeyLacpPortGroupIdThe value is LACP group ID which this port belongs.rw INTEGER .1.3.6.1.4.1.3646.1300.2.13.2.1.2 |
askeyLacpPortPriorityA 2-octet read-write value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.rw INTEGER .1.3.6.1.4.1.3646.1300.2.13.2.1.3 |
askeyLacpEnable or disable link aggreation control protocol.rw Enumeration .1.3.6.1.4.1.3646.1300.2.13.3 |
askeyLacpSystemPriorityA 2-octet read-write value indicating the priority value associated with the Actor's System ID.rw INTEGER .1.3.6.1.4.1.3646.1300.2.13.4 |
More MIBs from ASKEY
Browse all ASKEYMIBs →The ASKEY-SYSTEM-MIB provides SNMP management interfaces for ASKEY ADSL modems and routers, enabling the monitoring of DSL line parameters such as attenuation, signal-to-noise ratio, and interface status. It facilitates the collection of ADSL-specific performance counters and error statistics required for troubleshooting broadband connectivity issues on vendor hardware.
The ASKEY-ADSL-MIB module enables monitoring and management of ASKEY vendor ADSL modems and DSLAMs by exposing interface statistics, line status, and physical layer parameters via SNMP. It provides specific counters for DSL synchronization states, error rates, and data throughput to facilitate troubleshooting of broadband access links.
The ASKEY-ENTITY-ALARM-MIB extends the standard ENTITY-MIB to define, monitor, and report hardware alarm states and entity status conditions for ASKEY networking devices. It provides specific managed objects for tracking critical system events, such as interface failures, power supply anomalies, and environmental thresholds, within ASKEY-managed infrastructure.
The ASKEY-HARDWARE-INFORMATION-MIB enables SNMP-based monitoring of ASKEY network equipment by exposing operational status and telemetry for network cards, line cards, and fan modules. This module facilitates hardware health assessment and fault detection through standardized access to component-level inventory and state data.
The ASKEY-MCAST-MIB module enables monitoring and configuration of multicast profile parameters on ASKEY network devices, specifically tracking session states, group membership data, and multicast forwarding statistics. This MIB facilitates the management of IP multicast services by exposing OID-based metrics for profile definitions and operational status within the device's multicast routing and switching infrastructure.
The ASKEY-DSLAM-VC-VLAN-MIB enables monitoring and configuration of Virtual Circuit (VC) to Virtual LAN (VLAN) mapping tables on ASKEY DSL Access Multiplexer (DSLAM) hardware via SNMP. It exposes managed objects for tracking the binding relationships between ATM/PPPoE virtual circuits and their corresponding Ethernet VLAN identifiers to ensure proper traffic segregation and service delivery.