ADTRAN-ATLAS-V35NX-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ADTRAN-ATLAS-V35NX-MIB.
61
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
61 total| Object Name |
|---|
adtran OBJECT IDENTIFIER .1.3.6.1.4.1.664 |
RFC1155-SMI Unknown .1.3.6.1.4.1.664 |
adMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.664.2 |
adATLASmg OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154 |
adATLASV35NxSlipAlarmActiveThis trap indicates a SLIP alarm is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400700 |
adATLASV35NxSlipAlarmInActiveThis trap indicates a SLIP alarm is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400701 |
adATLASV35NxPLLAlarmActiveThis trap indicates a PLL alarm is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400702 |
adATLASV35NxPLLAlarmInActiveThis trap indicates a PLL alarm is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400703 |
adATLASV35NxZeroAlarmActiveThis trap indicates a Zero alarm is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400704 |
adATLASV35NxZeroAlarmInActiveThis trap indicates a Zero alarm is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400705 |
adATLASV35NxExtClkAlarmActiveThis trap indicates a no external clock alarm is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400706 |
adATLASV35NxExtClkAlarmInActiveThis trap indicates a no external clock alarm is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400707 |
adATLASV35NxRTSActiveThis trap indicates the RTS Lead is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400708 |
adATLASV35NxRTSInActiveThis trap indicates the RTS Lead is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400709 |
adATLASV35NxCTSActiveThis trap indicates the CTS Lead is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400710 |
adATLASV35NxCTSInActiveThis trap indicates the CTS Lead is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400711 |
adATLASV35NxDTRActiveThis trap indicates the DTR Lead is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400712 |
adATLASV35NxDTRInActiveThis trap indicates the DTR Lead is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400713 |
adATLASV35NxDSRActiveThis trap indicates the DSR Lead is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400714 |
adATLASV35NxDSRInActiveThis trap indicates the DSR Lead is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400715 |
adATLASV35NxDCDActiveThis trap indicates the DCD Lead is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400716 |
adATLASV35NxDCDInActiveThis trap indicates the DCD Lead is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400717 |
adATLASV35NxRIActiveThis trap indicates the RI Lead is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400718 |
adATLASV35NxRIInActiveThis trap indicates the RI Lead is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400719 |
adATLASV35NxTDActiveThis trap indicates the presence of transistions on the TD lead. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400720 |
adATLASV35NxTDInActiveThis trap indicates the absence of transistions on the TD lead. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400721 |
adATLASV35NxRDActiveThis trap indicates the presence of transistions on the RD Lead. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400722 |
adATLASV35NxRDInActiveThis trap indicates the absence of transistions on the RD Lead. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400723 |
adATLASV35NxECActiveThis trap indicates the presence of transistions on the EC Lead. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400724 |
adATLASV35NxECInActiveThis trap indicates the absence of transistions on the EC Lead. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400725 |
adGenATLASmg OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154.1 |
adATLASV35Nxmg OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154.1.7 |
adATLASV35NxIfNumberThe number of V.35 Nx ports (regardless of their current
state) present on this system.ro INTEGER .1.3.6.1.4.1.664.2.154.1.7.1 |
adATLASV35NxIfTableThe ATLAS V.35 Nx Interface Status Table. SEQUENCE OF AdATLASV35NxIfEntry .1.3.6.1.4.1.664.2.154.1.7.2 |
adATLASV35NxIfEntryAn entry in the ATLAS V.35 Nx Interface Status Table. AdATLASV35NxIfEntry .1.3.6.1.4.1.664.2.154.1.7.2.1 |
adATLASV35NxIfIndexThis variable indicates the interface number of a
particular V.35 Nx port within the ATLAS product.
This number will be the same as the ifIndex located in
the MIB-II interface table.ro INTEGER .1.3.6.1.4.1.664.2.154.1.7.2.1.1 |
adATLASV35NxIfSlotNumThis variable indicates the slot number of a
particular ATLAS module with a V.35 Nx interface.ro INTEGER .1.3.6.1.4.1.664.2.154.1.7.2.1.2 |
adATLASV35NxIfPortNumThis variable indicates the port number of a
particular V.35 Nx interface on an ATLAS module.ro INTEGER .1.3.6.1.4.1.664.2.154.1.7.2.1.3 |
adATLASV35NxIfAlarmStatusThis bit-encoded variable indicates the current alarm
status of a V.35 Nx interface. This variable is encoded
as follows:
CLOCK SLIP ALARM 0x01
PLL ALARM 0x02
ZERO ALARM 0x04
NO EXT CLK ALARM 0x08
Note: There may be multiple bits set based on the current
state of the interface. If a bit is set, then the
corresponding alarm is active.ro INTEGER .1.3.6.1.4.1.664.2.154.1.7.2.1.4 |
adATLASV35NxIfDTEStatusThis bit-encoded variable indicates the current state
of the DTE leads on a V.35 Nx interface. This variable
is encoded as follows:
RTS 0x001
CTS 0x002
DTR 0x004
DSR 0x008
DCD 0x010
RI 0x020
TD 0x040
RD 0x080
EC 0x100
Note: There may be multiple bits set based on the current
state of the interface. If a bit is set, then the
corresponding DTE lead is active.ro INTEGER .1.3.6.1.4.1.664.2.154.1.7.2.1.5 |
adATLASV35NxIfDataRateThis variable indicates the current data rate of a
V.35 Nx interface.ro Gauge .1.3.6.1.4.1.664.2.154.1.7.2.1.6 |
adATLASV35NxIfPLLFifoStatusThis bit-encoded variable indicates the current
PLL/FIFO status of a V.35 Nx interface. This
variable is encoded as follows:
LOCK 0x01
RXE 0x02
RXF 0x04
TXE 0x08
TXF 0x10
Note: There may be multiple bits set based on the current
state of the interface.ro INTEGER .1.3.6.1.4.1.664.2.154.1.7.2.1.7 |
adATLASV35NxIfInbandStatTableThe ATLAS V.35 Nx Interface Inband Statistics Table. SEQUENCE OF AdATLASV35NxIfInbandStatEntry .1.3.6.1.4.1.664.2.154.1.7.3 |
adATLASV35NxIfInbandStatEntryAn entry in the ATLAS V.35 Nx Interface Inband
Statistics Table. AdATLASV35NxIfInbandStatEntry .1.3.6.1.4.1.664.2.154.1.7.3.1 |
adATLASV35NxIfInbandStatIndexThis variable indicates the Interface number of a
particular V.35 Nx port within the ATLAS product.
This number will be the same as the ifIndex located in
the MIB-II interface table.ro INTEGER .1.3.6.1.4.1.664.2.154.1.7.3.1.1 |
adATLASV35NxIfInbandStatRxFramesThis variable indicates the number of frames
recieved by a particular V.35 Nx interface.ro Counter .1.3.6.1.4.1.664.2.154.1.7.3.1.2 |
adATLASV35NxIfInbandStatTxFramesThis variable indicates the number of frames
transmitted by a particular V.35 Nx interface.ro Counter .1.3.6.1.4.1.664.2.154.1.7.3.1.3 |
adATLASV35NxIfInbandStatRxBytesThis variable indicates the number of bytes recieved
by a particular V.35 Nx interface.ro Counter .1.3.6.1.4.1.664.2.154.1.7.3.1.4 |
adATLASV35NxIfInbandStatTxBytesThis variable indicates the number of bytes
transmitted by a particular V.35 Nx interface.ro Counter .1.3.6.1.4.1.664.2.154.1.7.3.1.5 |
adATLASV35NxIfInbandStatResetThis variable is used to reset the inband statistics.rw Enumeration .1.3.6.1.4.1.664.2.154.1.7.3.1.6 |
adATLASV35NxTstTableThe ATLAS V.35 Nx Interface Test Table. SEQUENCE OF AdATLASV35NxTstEntry .1.3.6.1.4.1.664.2.154.1.7.4 |
adATLASV35NxTstEntryAn entry in the ATLAS V.35 Nx Interface Test Table. AdATLASV35NxTstEntry .1.3.6.1.4.1.664.2.154.1.7.4.1 |
adATLASV35NxTstIndexThis variable indicates the interface number of a
particular V.35 Nx port within the ATLAS product.
This number will be the same as the ifIndex located in
the MIB-II interface table.ro INTEGER .1.3.6.1.4.1.664.2.154.1.7.4.1.1 |
adATLASV35NxTstLoopbkThis variable controls the activation and
deactivation of loopbacks on a particular
V.35 Nx interface.rw Enumeration .1.3.6.1.4.1.664.2.154.1.7.4.1.2 |
adATLASV35NxTstLoopbkStatusThis variable indicates a V.35 Nx interfaces
current loopback status by displaying one of the
following status messages:
No loopback active
Looping up remote unit
Remote unit looped back
Looping down remote unit
Remote loopup failed
Port looped from remote source
Port loopback active.ro Enumeration .1.3.6.1.4.1.664.2.154.1.7.4.1.3 |
adATLASV35NxTst511PatternThis variable controls the activation and
deactivation of the 511 test pattern generator
and detector.rw Enumeration .1.3.6.1.4.1.664.2.154.1.7.4.1.4 |
adATLASV35NxTstPatternSyncThis variable displays the synchronization status
of the 511 pattern test.ro Enumeration .1.3.6.1.4.1.664.2.154.1.7.4.1.5 |
adATLASV35NxTstPatternSyncLostThis variable displays whether or not the synchronization
was ever lost during the 511 pattern test.ro Enumeration .1.3.6.1.4.1.664.2.154.1.7.4.1.6 |
adATLASV35NxTstPatternESsThis variable indicates the number of seconds
(after pattern sync) of the 511 pettern test that
have contained at least one error.ro Counter .1.3.6.1.4.1.664.2.154.1.7.4.1.7 |
adATLASV35NxTstInjectErrsInject a 511 pattern error into the data stream.rw Enumeration .1.3.6.1.4.1.664.2.154.1.7.4.1.8 |
adATLASV35NxTstClearRsltsReset all test results.rw Enumeration .1.3.6.1.4.1.664.2.154.1.7.4.1.9 |