ZYXEL-ves1608FE57-MIB
ZyXEL Private MIB
Main OID:
ves1608FE57.1.3.6.1.4.1.890.1.5.12.43
1349
Objects
Active
Status
17
Dependencies
Imported Objects
Objects
1349 total| Object Name |
|---|
zyxel OBJECT IDENTIFIER .1.3.6.1.4.1.890 |
RFC1155-SMI Unknown .1.3.6.1.4.1.890 |
IPV6-TC NOTIFICATION-TYPE .1.3.6.1.4.1.890 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.890.1 |
accessSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5 |
vesSeries OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12 |
ves1608FE57ZyXEL Private MIB MODULE-IDENTITY .1.3.6.1.4.1.890.1.5.12.43 |
sysInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.1 |
sysSwPlatformMajorVersSW platform major version, e.g. 3.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.1.1 |
sysSwPlatformMinorVersSW platform minor version, e.g. 50.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.1.2 |
sysSwModelStringModel letters, e.g. TJro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.1.3 |
sysSwVersionControlNbrVersion control number, e.g. 0.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.1.4 |
sysSwDaySW compilation day, e.g. 19.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.1.5 |
sysSwMonthSW compilation month, e.g. 8.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.1.6 |
sysSwYearSW compilation year, e.g. 2004.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.1.7 |
sysHwMajorVersHW major version number, e.g. 1.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.1.8 |
sysHwMinorVersHW minor version number, e.g. 0.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.1.9 |
sysSerialNumberSerial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.1.10 |
sysFirmwareVersionVDSL Switch Firmware Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.1.11 |
sysModemCodeVersionVDSL Modem Code Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.1.12 |
sysPowerInfoCO Power inforo DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.1.13 |
sysSwBootUpImageCurrent system boot up image,
You can change the boot up image of next rebooting by setting sysMgmtBootupImage.ro Enumeration .1.3.6.1.4.1.890.1.5.12.43.1.14 |
sysImage1FwVersionVDSL Switch Image 1 Firmware Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.1.15 |
sysImage2FwVersionVDSL Switch Image 2 Firmware Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.1.16 |
brLimitSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.3 |
brLimitStateBroadcast/multicast/DLF rate limiting enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.3.1 |
brLimitPortTable SEQUENCE OF BrLimitPortEntry .1.3.6.1.4.1.890.1.5.12.43.3.2 |
brLimitPortEntryAn entry in brLimitPortTable. BrLimitPortEntry .1.3.6.1.4.1.890.1.5.12.43.3.2.1 |
brLimitPortBrStateBroadcast rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.3.2.1.1 |
brLimitPortBrRateAllowed broadcast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.3.2.1.2 |
brLimitPortMcStateMulticast rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.3.2.1.3 |
brLimitPortMcRateAAllowed mullticast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.3.2.1.4 |
brLimitPortDlfStateDestination lookup failure frames rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.3.2.1.5 |
brLimitPortDlfRateAllowed destination lookup failure frames rate in pkts/s.
For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.3.2.1.6 |
portSecuritySetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.4 |
portSecurityState0: disable, 1:enable port security, 2:enable vlan securityrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.4.1 |
portSecurityPortTable SEQUENCE OF PortSecurityPortEntry .1.3.6.1.4.1.890.1.5.12.43.4.2 |
portSecurityPortEntryAn entry in portSecurityPortTable. PortSecurityPortEntry .1.3.6.1.4.1.890.1.5.12.43.4.2.1 |
portSecurityPortStatePort Security enabled/disabled on the port.
Active(1) means this port only accept frames from static MAC addresses that are configured for the port,
and dynamic MAC address frames up to the number specified by portSecurityPortCount object.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.4.2.1.1 |
portSecurityPortLearnStateMAC address learning enabled/disable on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.4.2.1.2 |
portSecurityPortCountNumber of (dynamic) MAC addresses that may be learned on the port.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.4.2.1.3 |
portSecurityMacFreezeThis entry is used to execute MacFreeze action to port.
It's meaningless while reading this entry.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.4.3 |
vlanTrunkSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.5 |
vlanTrunkPortTable SEQUENCE OF VlanTrunkPortEntry .1.3.6.1.4.1.890.1.5.12.43.5.1 |
vlanTrunkPortEntryAn entry in vlanTrunkPortTable. VlanTrunkPortEntry .1.3.6.1.4.1.890.1.5.12.43.5.1.1 |
vlanTrunkPortStateVlanTrunking enabled/disabled on the port.
Active(1) to allow frames belonging to unknown
VLAN groups to pass through the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.5.1.1.1 |
ctlProtTransSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.6 |
ctlProtTransStateBridge control protocol transparency enabled/disabled for the switchrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.6.1 |
ctlProtTransTunnelPortTable SEQUENCE OF CtlProtTransTunnelPortEntry .1.3.6.1.4.1.890.1.5.12.43.6.2 |
ctlProtTransTunnelPortEntryAn entry in ctlProtTransTunnelPortTable. CtlProtTransTunnelPortEntry .1.3.6.1.4.1.890.1.5.12.43.6.2.1 |
ctlProtTransTunnelModeBridge control protocol transparency mode for the port.
Modes: Peer(0), Tunnel(1), Discard(2), Network(3)rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.6.2.1.1 |
vlanStackSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.7 |
vlanStackStateVLAN Stacking enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.7.1 |
vlanStackTpidSP TPID in hex format, e.g. 8100.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.7.2 |
vlanStackPortTable SEQUENCE OF VlanStackPortEntry .1.3.6.1.4.1.890.1.5.12.43.7.3 |
vlanStackPortEntryAn entry in vlanStackPortTable. VlanStackPortEntry .1.3.6.1.4.1.890.1.5.12.43.7.3.1 |
vlanStackPortModeMode of the port. Set Normal to have the switch ignore frames received
(or transmitted) on this port with VLAN stacking tags.
Anything you configure in SPVID and Priority are ignored.
Set Access mode to have the switch add the SP TPID tag to all incoming
frames received on this port. Set Access mode for ingress ports at the
edge of the service provider's network. Set Tunnel mode (available for
Gigabit ports only) for egress ports at the edge of the service provider's
network. In order to support VLAN stacking on a port, the port must be able
to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag)
to pass through it. normal (1), Access (2), tunnel (3)rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.7.3.1.1 |
vlanStackPortVidVLAN ID used in service provider tag.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.7.3.1.2 |
vlanStackPortPrioPriority value for service provider tag.
0 is the lowest priority level and 7 is the highest.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.7.3.1.3 |
vlanStackTunnelPortTpidTunnel Port TPID in hex format, e.g. 8100.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.7.3.1.4 |
vlanStackPCopyCtagPriorw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.7.3.1.5 |
selectiveQinQTable SEQUENCE OF SelectiveQinQEntry .1.3.6.1.4.1.890.1.5.12.43.7.4 |
selectiveQinQEntryAn entry in selective qinq table SelectiveQinQEntry .1.3.6.1.4.1.890.1.5.12.43.7.4.1 |
selectiveQinQNameThe name of selective qinq entryrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.7.4.1.1 |
selectiveQinQPortinterface port idro INTEGER .1.3.6.1.4.1.890.1.5.12.43.7.4.1.2 |
selectiveQinQCvidinner vidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.7.4.1.3 |
selectiveQinQSpvidouter vidrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.7.4.1.4 |
selectiveQinQPrioritypriorityrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.7.4.1.5 |
selectiveQinQRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.7.4.1.6 |
selectiveQinQACtivePrioUse the value for priority for Stagrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.7.4.1.7 |
portBasedInnerQTable SEQUENCE OF PortBasedInnerQEntry .1.3.6.1.4.1.890.1.5.12.43.7.5 |
portBasedInnerQEntryAn entry in PortBasedInnerQTable. PortBasedInnerQEntry .1.3.6.1.4.1.890.1.5.12.43.7.5.1 |
portBasedInnerQVidVLAN ID used in inner tag.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.7.5.1.1 |
portBasedInnerQPrioPriority value for inner tag.
0 is the lowest priority level and 7 is the highest.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.7.5.1.2 |
portBasedInnerQActiverw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.7.5.1.3 |
portBasedInnerQTxUntagTx without Ctag (Only active when innerQ is enable)rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.7.5.1.4 |
dot1xSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.8 |
portAuthState802.1x port authentication enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.8.3 |
portAuthTable SEQUENCE OF PortAuthEntry .1.3.6.1.4.1.890.1.5.12.43.8.4 |
portAuthEntryAn entry in portAuthTable. PortAuthEntry .1.3.6.1.4.1.890.1.5.12.43.8.4.1 |
portAuthEntryState802.1x port authentication enabled or disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.8.4.1.1 |
portReAuthEntryState802.1x port re-authentication enabled or disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.8.4.1.2 |
portReAuthEntryTimerRe-authentication timer in seconds.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.8.4.1.3 |
hwMonitorInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.9 |
fanRpmTable SEQUENCE OF FanRpmEntry .1.3.6.1.4.1.890.1.5.12.43.9.1 |
fanRpmEntryAn entry in fanRpmTable. FanRpmEntry .1.3.6.1.4.1.890.1.5.12.43.9.1.1 |
fanRpmIndexIndex of FAN.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.1.1.1 |
fanRpmCurValueCurrent speed in Revolutions Per Minute (RPM) on the fan.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.1.1.2 |
fanRpmMaxValueMaximum speed measured in Revolutions Per Minute (RPM) on the fan.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.1.1.3 |
fanRpmMinValueMinimum speed measured in Revolutions Per Minute (RPM) on the fan.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.1.1.4 |
fanRpmLowThreshThe minimum speed at which a normal fan should work.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.1.1.5 |
fanRpmDescr'Normal' indicates that this fan is functioning above the minimum speed.
'Error' indicates that this fan is functioning below the minimum speed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.9.1.1.6 |
tempTable SEQUENCE OF TempEntry .1.3.6.1.4.1.890.1.5.12.43.9.2 |
tempEntryAn entry in tempTable. TempEntry .1.3.6.1.4.1.890.1.5.12.43.9.2.1 |
tempIndexIndex of temperature unit. 1:CPU, 2:DSP, 3:HW monitor chipro Enumeration .1.3.6.1.4.1.890.1.5.12.43.9.2.1.1 |
tempCurValueThe current temperature measured at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.2.1.2 |
tempMaxValueThe maximum temperature measured at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.2.1.3 |
tempMinValueThe minimum temperature measured at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.2.1.4 |
tempHighThreshThe upper temperature limit at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.2.1.5 |
tempDescr'Normal' indicates temperatures below the threshold and 'Error' for those above.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.9.2.1.6 |
voltageTable SEQUENCE OF VoltageEntry .1.3.6.1.4.1.890.1.5.12.43.9.3 |
voltageEntryAn entry in voltageTable. VoltageEntry .1.3.6.1.4.1.890.1.5.12.43.9.3.1 |
voltageIndexIndex of voltage.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.3.1.1 |
voltageCurValueThe current voltage reading.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.3.1.2 |
voltageMaxValueThe maximum voltage measured at this point.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.3.1.3 |
voltageMinValueThe minimum voltage measured at this point.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.3.1.4 |
voltageNominalValueThe normal voltage at wchich the switch work.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.3.1.5 |
voltageLowThreshThe minimum voltage at which the switch should work.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.9.3.1.6 |
voltageDescr'Normal' indicates that the voltage is within an acceptable operating range
at this point; otherwise 'Error' is displayed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.9.3.1.7 |
snmpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.10 |
snmpGetCommunityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.10.1 |
snmpSetCommunityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.10.2 |
snmpTrapCommunityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.10.3 |
snmpTrapDestTable SEQUENCE OF SnmpTrapDestEntry .1.3.6.1.4.1.890.1.5.12.43.10.4 |
snmpTrapDestEntryAn entry in snmpTrapDestTable. SnmpTrapDestEntry .1.3.6.1.4.1.890.1.5.12.43.10.4.1 |
snmpTrapDestIPIP address of trap destination.ro IpAddress .1.3.6.1.4.1.890.1.5.12.43.10.4.1.1 |
snmpTrapDestRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.10.4.1.2 |
snmpTrapDestPortThe UDP port of the trap destination.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.10.4.1.3 |
snmpTrapVersionThe SNMP protocol version to send traps.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.10.4.1.4 |
snmpTrapUserNameThe user name for sending SNMPv3 traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.10.4.1.5 |
snmpTrapGroupTable SEQUENCE OF SnmpTrapGroupEntry .1.3.6.1.4.1.890.1.5.12.43.10.5 |
snmpTrapGroupEntryAn entry in snmpTrapGroupTable. SnmpTrapGroupEntry .1.3.6.1.4.1.890.1.5.12.43.10.5.1 |
snmpTrapSystemGrouprw Bits .1.3.6.1.4.1.890.1.5.12.43.10.5.1.1 |
snmpTrapInterfaceGrouprw Bits .1.3.6.1.4.1.890.1.5.12.43.10.5.1.2 |
snmpTrapAAAGrouprw Bits .1.3.6.1.4.1.890.1.5.12.43.10.5.1.3 |
snmpTrapSwitchGrouprw Bits .1.3.6.1.4.1.890.1.5.12.43.10.5.1.5 |
snmpTrapVdslGrouprw Bits .1.3.6.1.4.1.890.1.5.12.43.10.5.1.6 |
snmpVersionThe SNMP version to be used. v3v2c means that the manager
can get/set by SNMPv3 and can get by SNMPv2c.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.10.6 |
snmpUserTableA table that contains SNMPv3 user information. SEQUENCE OF SnmpUserEntry .1.3.6.1.4.1.890.1.5.12.43.10.7 |
snmpUserEntryAn entry of snmpUserTable. SnmpUserEntry .1.3.6.1.4.1.890.1.5.12.43.10.7.1 |
snmpUserNameThe user name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.10.7.1.1 |
snmpUserSecurityLevelThe level of security at which SNMP messages can be sent or
with which operations are being processed.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.10.7.1.2 |
snmpUserAuthProtocolThe type of authentication protocol to be used.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.10.7.1.3 |
snmpUserPrivProtocolThe type of privacy protocol to be used.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.10.7.1.4 |
snmpTrapDestInfoTable SEQUENCE OF SnmpTrapDestInfoEntry .1.3.6.1.4.1.890.1.5.12.43.10.8 |
snmpTrapDestInfoEntryAn entry in snmpTrapDestInfoTable. SnmpTrapDestInfoEntry .1.3.6.1.4.1.890.1.5.12.43.10.8.1 |
snmpTrapDestInfoIpAddrTypeIP address of trap destination.ro InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.10.8.1.1 |
snmpTrapDestInfoIpAddrIP address of trap destination.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.10.8.1.2 |
snmpTrapDestInfoRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.10.8.1.3 |
snmpTrapDestInfoPortThe UDP port of the trap destination.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.10.8.1.4 |
snmpTrapDestInfoVersionThe SNMP protocol version to send traps.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.10.8.1.5 |
snmpTrapDestInfoUserNameThe user name for sending SNMPv3 traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.10.8.1.6 |
snmpTrapGroupInfoTable SEQUENCE OF SnmpTrapGroupInfoEntry .1.3.6.1.4.1.890.1.5.12.43.10.9 |
snmpTrapGroupInfoEntryAn entry in snmpTrapGroupInfoTable. SnmpTrapGroupInfoEntry .1.3.6.1.4.1.890.1.5.12.43.10.9.1 |
snmpTrapGroupInfoSystemGrouprw Bits .1.3.6.1.4.1.890.1.5.12.43.10.9.1.1 |
snmpTrapGroupInfoInterfaceGrouprw Bits .1.3.6.1.4.1.890.1.5.12.43.10.9.1.2 |
snmpTrapGroupInfoAAAGrouprw Bits .1.3.6.1.4.1.890.1.5.12.43.10.9.1.3 |
snmpTrapGroupInfoSwitchGrouprw Bits .1.3.6.1.4.1.890.1.5.12.43.10.9.1.5 |
snmpTrapGroupInfoVdslGrouprw Bits .1.3.6.1.4.1.890.1.5.12.43.10.9.1.6 |
dateTimeServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.11 |
dateTimeServerTypeThe time service protocol.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.11.1 |
dateTimeServerIPIP address of time server.rw IpAddress .1.3.6.1.4.1.890.1.5.12.43.11.2 |
dateTimeZoneThe time difference between UTC. Ex: +01rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.11.3 |
dateTimeNewDateYearThe new date in year.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.11.4 |
dateTimeNewDateMonthThe new date in month.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.11.5 |
dateTimeNewDateDayThe new date in day.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.11.6 |
dateTimeNewTimeHourThe new time in hour.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.11.7 |
dateTimeNewTimeMinuteThe new time in minute.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.11.8 |
dateTimeNewTimeSecondThe new time in second.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.11.9 |
dateTimeDaylightSavingTimeSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.11.10 |
daylightSavingTimeStateDaylight saving time service enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.11.10.1 |
daylightSavingTimeStartDateWeekDaylight saving time service start week.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.11.10.2 |
daylightSavingTimeStartDateDayDaylight saving time service start day.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.11.10.3 |
daylightSavingTimeStartDateMonthDaylight saving time service start month.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.11.10.4 |
daylightSavingTimeStartDateHourDaylight saving time service start time.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.11.10.5 |
daylightSavingTimeEndDateWeekDaylight saving time service end week.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.11.10.6 |
daylightSavingTimeEndDateDayDaylight saving time service end day.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.11.10.7 |
daylightSavingTimeEndDateMonthDaylight saving time service end month.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.11.10.8 |
daylightSavingTimeEndDateHourDaylight saving time service end time.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.11.10.9 |
dateTimeServerIPAddrTypeThe address type of dateTimeServerIPAddr.rw InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.11.11 |
dateTimeServerIPAddrThe IP address of time server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.11.12 |
sysMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.12 |
sysMgmtConfigSaveIf setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file.
If not, running-config will be written to the booting one.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.12.1 |
sysMgmtBootupConfigThe setting value (read index) will be written into non-volatile memory.
While rebooting, the variable write index is equal to read index initially.
You can change the value of write index by CLI / MIB.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.12.2 |
sysMgmtRebootReboot switch from SNMP. 1:Reboot, 0:Nothingrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.12.3 |
sysMgmtDefaultConfigErase running config and reset to default.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.12.4 |
sysMgmtLastActionStatusDisplay status of last mgmt action.ro Enumeration .1.3.6.1.4.1.890.1.5.12.43.12.5 |
sysMgmtSystemStatusThis variable indicates the status of the system.
The sysMgmtAlarmStatus is a bit map represented
a sum, therefore, it can represent multiple defects
simultaneously. The sysNoDefect should be set if and only if
no other flag is set.
The various bit positions are:
0 sysAlarmDetected
1 sysTemperatureError
2 sysFanRPMError
3 sysVoltageRangeErrorro Bits .1.3.6.1.4.1.890.1.5.12.43.12.6 |
sysMgmtCPUUsageShow device CPU load in %, it's the snapshot of CPU load when
getting the values.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.12.7 |
sysMgmtBootupImageThe setting value (read index) will be written into non-volatile memory.
When rebooting, the selected image will be used.
You can change the value of write index by CLI / MIB.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.12.8 |
sysMgmtCounterResetReset all port counters.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.12.9 |
sysMgmtTftpServiceSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.12.10 |
sysMgmtTftpServerIpIP address of TFTP serverrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.12.10.1 |
sysMgmtTftpRemoteFileNameThe file name that you want to backup to or restore from TFTP serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.12.10.2 |
sysMgmtTftpConfigIndexIndex of system configuration which you want to restore.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.12.10.3 |
sysMgmtTftpActionAction of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.12.10.4 |
sysMgmtTftpActionStatusDisplay status of mgmt action.ro Enumeration .1.3.6.1.4.1.890.1.5.12.43.12.10.5 |
sysMgmtTftpActionErrorInfoDisplay error information of mgmt action.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.12.10.6 |
sysMgmtTftpServerAddressTypeThe address type of the sysMgmtTftpServerAddress entry.rw InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.12.10.7 |
sysMgmtTftpServerAddressIPv4/IPv6 address of TFTP serverrw InetAddress .1.3.6.1.4.1.890.1.5.12.43.12.10.8 |
sysMgmtPacketBufferUsageShow device packet buffer usage in %, it's the snapshot of packet buffer usage ratio when
getting the values.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.12.12 |
sysMgmtMemoryUsageShow device memory usage in %, it's the snapshot of the device memory usage ratio when
getting the values.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.12.13 |
sysLoginSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.12.14 |
loginLimitMaxNumberOfUserro INTEGER .1.3.6.1.4.1.890.1.5.12.43.12.14.1 |
sysLoginSetupTable SEQUENCE OF SysLoginSetupEntry .1.3.6.1.4.1.890.1.5.12.43.12.14.2 |
sysLoginSetupEntryAn entry in LoginLimitMaxNumberOfUser. SysLoginSetupEntry .1.3.6.1.4.1.890.1.5.12.43.12.14.2.1 |
sysLoginNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.1 |
sysLoginPasswordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.2 |
sysLoginPrivilegerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.3 |
sysLoginRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.4 |
sysMgmtMacFlushSet 1 to execute mac flush operation, read value will always return 0rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.12.16 |
sysMgmtCPUUsageThresholdSet CPU Threshold valuerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.12.17 |
sysMgmtPacketBufferThresholdSet packet buffer usage Threshold valuerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.12.18 |
sysMgmtMemoryUsageThresholdSet memory usage Threshold valuerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.12.19 |
sysMgmtPlusVersionGet Hardware Plus Versionro INTEGER .1.3.6.1.4.1.890.1.5.12.43.12.20 |
layer2Setup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.13 |
vlanTypeSetuprw Enumeration .1.3.6.1.4.1.890.1.5.12.43.13.1 |
igmpSnoopingStateSetuprw Enumeration .1.3.6.1.4.1.890.1.5.12.43.13.2 |
tagVlanPortIsolationStaterw Enumeration .1.3.6.1.4.1.890.1.5.12.43.13.3 |
stpStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.13.4 |
igmpFilteringStateSetuprw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.13.5 |
unknownMulticastFrameForwardingrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.13.6 |
multicastGrpHostTimeoutSpecify host timeout for all multicast groups when the specific port is in auto mode.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.13.7 |
multicastGrpLeaveTimeoutSpecify leave timeout for all multicast groups.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.13.8 |
reservedMulticastFrameForwardingrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.13.9 |
igmpsnp8021pPrioritySet the 802.1p priority of control messages for igmp-snooping(0~8, 8-No Change)rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.13.10 |
portBasedVlanPortIsolationStateThis item always returns 0. Set 1(port isolation) or 2 (all-connected) to this item to quickly setup port-based VLAN members.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.13.11 |
igmpsnpVlanModerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.13.12 |
stpModerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.13.13 |
igmpsnpVlanTable SEQUENCE OF IgmpsnpVlanEntry .1.3.6.1.4.1.890.1.5.12.43.13.14 |
igmpsnpVlanEntryAn entry in IgmpsnpVlanTable. IgmpsnpVlanEntry .1.3.6.1.4.1.890.1.5.12.43.13.14.1 |
igmpsnpVidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.13.14.1.1 |
igmpsnpVlanNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.13.14.1.2 |
igmpsnpVlanRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.13.14.1.3 |
mgmdMLDsupportEnable MLD / Disable MLDrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.13.17 |
ipSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.14 |
dnsIpAddressrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.14.1 |
defaultMgmtrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.14.2 |
inbandIpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.14.3 |
inbandIpTyperw Enumeration .1.3.6.1.4.1.890.1.5.12.43.14.3.1 |
inbandVidrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.14.3.2 |
inbandStaticIprw IpAddress .1.3.6.1.4.1.890.1.5.12.43.14.3.3 |
inbandStaticSubnetMaskrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.14.3.4 |
inbandStaticGatewayrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.14.3.5 |
outOfBandIpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.14.4 |
outOfBandIprw IpAddress .1.3.6.1.4.1.890.1.5.12.43.14.4.1 |
outOfBandSubnetMaskrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.14.4.2 |
outOfBandGatewayrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.14.4.3 |
maxNumOfInbandIpro INTEGER .1.3.6.1.4.1.890.1.5.12.43.14.5 |
inbandIpTable SEQUENCE OF InbandIpEntry .1.3.6.1.4.1.890.1.5.12.43.14.6 |
inbandIpEntryAn entry in inbandIpTable. InbandIpEntry .1.3.6.1.4.1.890.1.5.12.43.14.6.1 |
inbandEntryIpro IpAddress .1.3.6.1.4.1.890.1.5.12.43.14.6.1.1 |
inbandEntrySubnetMaskrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.14.6.1.2 |
inbandEntryGatewayrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.14.6.1.3 |
inbandEntryVidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.14.6.1.4 |
inbandEntryManageablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.14.6.1.5 |
inbandEntryRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.14.6.1.6 |
filterSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.15 |
filterTable SEQUENCE OF FilterEntry .1.3.6.1.4.1.890.1.5.12.43.15.1 |
filterEntryAn entry in filterTable. FilterEntry .1.3.6.1.4.1.890.1.5.12.43.15.1.1 |
filterNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.15.1.1.1 |
filterActionStaterw Enumeration .1.3.6.1.4.1.890.1.5.12.43.15.1.1.2 |
filterMacAddrro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.15.1.1.3 |
filterVidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.15.1.1.4 |
filterRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.15.1.1.5 |
mirrorSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.16 |
mirrorStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.16.1 |
mirrorMonitorPortrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.16.2 |
mirrorTable SEQUENCE OF MirrorEntry .1.3.6.1.4.1.890.1.5.12.43.16.3 |
mirrorEntryAn entry in mirrorTable. MirrorEntry .1.3.6.1.4.1.890.1.5.12.43.16.3.1 |
mirrorMirroredStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.16.3.1.1 |
mirrorDirectionrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.16.3.1.2 |
mirrorRspanVidrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.16.7 |
aggrSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.17 |
aggrStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.17.1 |
aggrSystemPriorityrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.17.2 |
aggrGroupTable SEQUENCE OF AggrGroupEntry .1.3.6.1.4.1.890.1.5.12.43.17.3 |
aggrGroupEntryAn entry in aggrGroupTable. AggrGroupEntry .1.3.6.1.4.1.890.1.5.12.43.17.3.1 |
aggrGroupIndexro INTEGER .1.3.6.1.4.1.890.1.5.12.43.17.3.1.1 |
aggrGroupStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.17.3.1.2 |
aggrGroupDynamicStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.17.3.1.3 |
aggrPortTable SEQUENCE OF AggrPortEntry .1.3.6.1.4.1.890.1.5.12.43.17.4 |
aggrPortEntryAn entry in aggrPortTable. AggrPortEntry .1.3.6.1.4.1.890.1.5.12.43.17.4.1 |
aggrPortGrouprw Enumeration .1.3.6.1.4.1.890.1.5.12.43.17.4.1.1 |
aggrPortDynamicStateTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.17.4.1.2 |
accessCtlSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.18 |
accessCtlTable SEQUENCE OF AccessCtlEntry .1.3.6.1.4.1.890.1.5.12.43.18.1 |
accessCtlEntryAn entry in accessCtlTable. AccessCtlEntry .1.3.6.1.4.1.890.1.5.12.43.18.1.1 |
accessCtlServicero Enumeration .1.3.6.1.4.1.890.1.5.12.43.18.1.1.1 |
accessCtlEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.18.1.1.2 |
accessCtlServicePortrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.18.1.1.3 |
accessCtlTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.18.1.1.4 |
securedClientTable SEQUENCE OF SecuredClientEntry .1.3.6.1.4.1.890.1.5.12.43.18.2 |
securedClientEntryAn entry in securedClientTable. SecuredClientEntry .1.3.6.1.4.1.890.1.5.12.43.18.2.1 |
securedClientIndexro INTEGER .1.3.6.1.4.1.890.1.5.12.43.18.2.1.1 |
securedClientEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.18.2.1.2 |
securedClientStartIpIPv4 onlyrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.18.2.1.3 |
securedClientEndIpIPv4 onlyrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.18.2.1.4 |
securedClientServicerw Bits .1.3.6.1.4.1.890.1.5.12.43.18.2.1.5 |
securedClientIpAddrTyperw InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.18.2.1.6 |
securedClientStartIpAddrrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.18.2.1.7 |
securedClientEndIpAddrrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.18.2.1.8 |
queuingMethodSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.19 |
queuingMethodTyperw Enumeration .1.3.6.1.4.1.890.1.5.12.43.19.1 |
portQueuingMethodTable SEQUENCE OF PortQueuingMethodEntry .1.3.6.1.4.1.890.1.5.12.43.19.2 |
portQueuingMethodEntryAn entry in portQueuingMethodTable. PortQueuingMethodEntry .1.3.6.1.4.1.890.1.5.12.43.19.2.1 |
portQueuingMethodQueue0...7ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.19.2.1.1 |
portQueuingMethodWeight0...15rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.19.2.1.2 |
queuingMethodFeSpqVDSL port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.19.3 |
portQueuingMethodGeSpqTable SEQUENCE OF PortQueuingMethodGeSpqEntry .1.3.6.1.4.1.890.1.5.12.43.19.4 |
portQueuingMethodGeSpqEntryAn entry in portQueuingMethodGeSpqTable. PortQueuingMethodGeSpqEntry .1.3.6.1.4.1.890.1.5.12.43.19.4.1 |
portQueuingMethodGeSpqGE port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.19.4.1.1 |
dhcpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.20 |
globalDhcpRelay OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.20.1 |
globalDhcpRelayEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.20.1.1 |
globalDhcpRelayOption82Enablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.20.1.2 |
globalDhcpRelayInfoDatarw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.20.1.4 |
maxNumberOfGlobalDhcpRelayRemoteServerro INTEGER .1.3.6.1.4.1.890.1.5.12.43.20.1.5 |
globalDhcpRelayRemoteServerTable SEQUENCE OF GlobalDhcpRelayRemoteServerEntry .1.3.6.1.4.1.890.1.5.12.43.20.1.6 |
globalDhcpRelayRemoteServerEntryAn entry in globalDhcpRelayRemoteServerTable. GlobalDhcpRelayRemoteServerEntry .1.3.6.1.4.1.890.1.5.12.43.20.1.6.1 |
globalDhcpRelayRemoteServerIpro IpAddress .1.3.6.1.4.1.890.1.5.12.43.20.1.6.1.1 |
globalDhcpRelayRemoteServerRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.20.1.6.1.2 |
globalDhcpRelayRemoteIDEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.20.1.7 |
globalDhcpRelayRemoteIDDatarw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.20.1.8 |
globalDhcpRelayInfoTyperw Enumeration .1.3.6.1.4.1.890.1.5.12.43.20.1.9 |
globalDhcpRelayRemoteIDTyperw Enumeration .1.3.6.1.4.1.890.1.5.12.43.20.1.10 |
dhcpRelay OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.20.3 |
maxNumberOfDhcpRelayThe maximum number of DHCP relay entries that can be created.
A value of 0 for this object implies that there exists settings for
global DHCP relay.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.20.3.1 |
maxNumberOfDhcpRelayRemoteServerro INTEGER .1.3.6.1.4.1.890.1.5.12.43.20.3.2 |
dhcpRelayTable SEQUENCE OF DhcpRelayEntry .1.3.6.1.4.1.890.1.5.12.43.20.3.3 |
dhcpRelayEntryAn entry in dhcpRelayTable. DhcpRelayEntry .1.3.6.1.4.1.890.1.5.12.43.20.3.3.1 |
dhcpRelayOption82Enablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.1 |
dhcpRelayInfoDatarw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.3 |
dhcpRelayRemoteIDEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.4 |
dhcpRelayRemoteIDDatarw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.5 |
dhcpRelayInfoTyperw Enumeration .1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.6 |
dhcpRelayRemoteIDTyperw Enumeration .1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.7 |
dhcpRelayRemoteServerTable SEQUENCE OF DhcpRelayRemoteServerEntry .1.3.6.1.4.1.890.1.5.12.43.20.3.4 |
dhcpRelayRemoteServerEntryAn entry in dhcpRelayRemoteServerTable. DhcpRelayRemoteServerEntry .1.3.6.1.4.1.890.1.5.12.43.20.3.4.1 |
dhcpRelayVidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.20.3.4.1.1 |
dhcpRelayRemoteServerIpro IpAddress .1.3.6.1.4.1.890.1.5.12.43.20.3.4.1.2 |
dhcpRelayRemoteServerRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.20.3.4.1.3 |
staticRouteSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.21 |
maxNumberOfStaticRoutesro INTEGER .1.3.6.1.4.1.890.1.5.12.43.21.1 |
staticRouteTable SEQUENCE OF StaticRouteEntry .1.3.6.1.4.1.890.1.5.12.43.21.2 |
staticRouteEntryAn entry in staticRouteTable. StaticRouteEntry .1.3.6.1.4.1.890.1.5.12.43.21.2.1 |
staticRouteNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.21.2.1.1 |
staticRouteIpro IpAddress .1.3.6.1.4.1.890.1.5.12.43.21.2.1.2 |
staticRouteMaskro IpAddress .1.3.6.1.4.1.890.1.5.12.43.21.2.1.3 |
staticRouteGatewayrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.21.2.1.4 |
staticRouteMetricrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.21.2.1.5 |
staticRouteRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.21.2.1.6 |
arpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.22 |
arpTable SEQUENCE OF ArpEntry .1.3.6.1.4.1.890.1.5.12.43.22.1 |
arpEntryAn entry in arpTable. ArpEntry .1.3.6.1.4.1.890.1.5.12.43.22.1.1 |
arpIndexro INTEGER .1.3.6.1.4.1.890.1.5.12.43.22.1.1.1 |
arpIpAddrro IpAddress .1.3.6.1.4.1.890.1.5.12.43.22.1.1.2 |
arpMacAddrro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.22.1.1.3 |
arpMacVidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.22.1.1.4 |
arpType1-static, 2-dynamicro Enumeration .1.3.6.1.4.1.890.1.5.12.43.22.1.1.5 |
portOpModeSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.24 |
portOpModePortTable SEQUENCE OF PortOpModePortEntry .1.3.6.1.4.1.890.1.5.12.43.24.1 |
portOpModePortEntryAn entry in portOpModePortTable. PortOpModePortEntry .1.3.6.1.4.1.890.1.5.12.43.24.1.1 |
portOpModePortSpeedDuplexrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.24.1.1.1 |
portOpModePortFlowCntlrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.24.1.1.2 |
portOpModePortNamerw OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.24.1.1.3 |
portOpModePortModuleTypero Enumeration .1.3.6.1.4.1.890.1.5.12.43.24.1.1.4 |
portOpModePortLinkUpTypero Enumeration .1.3.6.1.4.1.890.1.5.12.43.24.1.1.5 |
portOpModePortIntrusionLockrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.24.1.1.6 |
portOpModePortLBTestSetupThis entry display latest loopback test status of port while performing loopback test.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.24.1.1.7 |
portOpModePortLBTestStatusThis entry display latest loopback test status of port while performing loopback test.ro Enumeration .1.3.6.1.4.1.890.1.5.12.43.24.1.1.8 |
portOpModePortSwCounterResetThis entry resets port SW counter.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.24.1.1.9 |
portOpModePortVdslCounterResetThis entry resets port VDSL counter.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.24.1.1.10 |
portOpModePortVdslStatusThis entry reports VDSL link current status.ro Enumeration .1.3.6.1.4.1.890.1.5.12.43.24.1.1.11 |
portOpModePortVdslUptimeThis entry reports VDSL link current link up time.ro OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.24.1.1.12 |
portOpModePortLBTable SEQUENCE OF PortOpModePortLBEntry .1.3.6.1.4.1.890.1.5.12.43.24.2 |
portOpModePortLBEntryAn entry in portOpModePortLBTable. PortOpModePortLBEntry .1.3.6.1.4.1.890.1.5.12.43.24.2.1 |
portOpModePortLBActiverw Enumeration .1.3.6.1.4.1.890.1.5.12.43.24.2.1.1 |
portOpModePortLBNumberrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.24.2.1.2 |
portOpModePortLBCountrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.24.2.1.3 |
portOpModePortLBPktSizePacket size range from 64 bytes to 1518 bytesrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.24.2.1.4 |
portOpModePortLBResultTable SEQUENCE OF PortOpModePortLBResultEntry .1.3.6.1.4.1.890.1.5.12.43.24.3 |
portOpModePortLBResultEntryAn entry in portOpModePortLBResultTable. PortOpModePortLBResultEntry .1.3.6.1.4.1.890.1.5.12.43.24.3.1 |
portOpModePortLBMaxRTTro INTEGER .1.3.6.1.4.1.890.1.5.12.43.24.3.1.1 |
portOpModePortLBMinRTTro INTEGER .1.3.6.1.4.1.890.1.5.12.43.24.3.1.2 |
portOpModePortLBAvgRTTro INTEGER .1.3.6.1.4.1.890.1.5.12.43.24.3.1.3 |
portOpModePortLBPktLossRateLoopback Packet loss ratero INTEGER .1.3.6.1.4.1.890.1.5.12.43.24.3.1.4 |
portOpModePortLBStatusro Enumeration .1.3.6.1.4.1.890.1.5.12.43.24.3.1.5 |
portBasedVlanSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.25 |
portBasedVlanPortListTable SEQUENCE OF PortBasedVlanPortListEntry .1.3.6.1.4.1.890.1.5.12.43.25.1 |
portBasedVlanPortListEntryAn entry in portBasedVlanPortListTable. PortBasedVlanPortListEntry .1.3.6.1.4.1.890.1.5.12.43.25.1.1 |
portBasedVlanPortListMembersrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.25.1.1.1 |
faultMIB OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.26 |
eventObjects OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.26.1 |
eventTableA list of currently active fault events. All faults
of normal type regardless of their severity level
are recorded in the event table. When a normal
type fault is cleared it is deleted from the event
table. SEQUENCE OF EventEntry .1.3.6.1.4.1.890.1.5.12.43.26.1.1 |
eventEntryAn entry containing information about an
event in the event table. EventEntry .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1 |
eventSeqNumThis variable represents the sequence number of an event.
Sequence number is incremented monotonically starting
from 0 until it reaches its maximum and wraps around back
to 0.
Sequence number is incremented when
- the state of a normal type fault is set on (the same sequence
number is present in the events table as well as in the trap
that is sent to notify about the fault on event)
- delta event occurs (sequence number present in trap message)
- the state of a normal type fault is set off (sequence number
present in trap that is sent to notify for clearing).ro Integer32 .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.1 |
eventEventIdThis variable represents the event ID which uniquely
identifies the event in the entire system.ro EventIdNumber .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.2 |
eventNameThis variable represents the name of the event, for
example 'Ethernet Link Down'ro DisplayString .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.3 |
eventInstanceTypeThis variable represents the type of InstanceId of a
particular event in the event table. In brief
the instanceType refers to the type of sub-component
generating this event in the system, for example
switch (5). For more details see the textual
conventions section.
AFFECTS: eventInstanceId,
eventInstanceNamero InstanceType .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.4 |
eventInstanceIdThis variable represents the InstanceId of a particular
event in the event current table. In brief the instanceId
refers to the sub-component generating this event in the
system, for example '1' for port 1. For more details see
the textual conventions section.
DEPENDS ON: eventInstanceTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.5 |
eventInstanceNameThis variable is mainly used to store additional information
about the sub-component that is generating an event. For
example this field may specify what cooling fan is faulty.
DEPENDS ON: eventInstanceTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.6 |
eventSeverityThis variable dictates the urgency of action when a event
occurs. There are four severity levels - Critical, Major,
Minor, and Informational. Critical events are those, which
require immediate operator intervention to prevent/reduce
system down time. Major events require quick attention and
Minor events possibly require some attention. Informational
events indicate the occurrence of events that may need to be
investigated.ro EventSeverity .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.7 |
eventSetTimeThis table contains only normal events and this variable
represents the time when the event become active, i.e. the
number of seconds since Jan 1, 1970 12:00AM.ro UtcTimeStamp .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.8 |
eventDescriptionThis variable contains a description of the event and reasons
behind the event. This is a free format alpha-numeric string
that is set by the entity generating this event. This variable
may be empty if there is no usefull information to report.
The maximum length of this string is 255 characters.ro DisplayString .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.9 |
eventServAffectiveThis variable indicates whether the event is service affective or notro EventServiceAffective .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.10 |
eventInstanceIdNumberThis variable represents the InstanceId of a particular
event in the event current table. In brief the instanceId
refers to the sub-component generating this event in the
system, for example '1' for port 1. For more details see
the textual conventions section.
DEPENDS ON: eventInstanceTypero Integer32 .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.11 |
faultTrapsMIB OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.27 |
trapInfoObjects OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.27.1 |
trapRefSeqNumIndicates the former sequence number of a cleared event
in the event table. Not intended to read but only used in
trap notifications.ro Integer32 .1.3.6.1.4.1.890.1.5.12.43.27.1.1 |
trapPersistenceIndicates whether the event is delta (automatically and
immediately cleared) or normal (not automatically cleared).
Not intended to read but only used in trap notifications.ro EventPersistence .1.3.6.1.4.1.890.1.5.12.43.27.1.2 |
trapSenderNodeIdRepresents the node ID of the sending network element. If not
supported should be set to 0. Not intended to read but only
used in trap notifications.ro Integer32 .1.3.6.1.4.1.890.1.5.12.43.27.1.3 |
trapSenderStatusRepresents the trap status. 0 means cleared, 1 means happened.ro Integer32 .1.3.6.1.4.1.890.1.5.12.43.27.1.4 |
trapNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.27.2 |
eventOnTrapThis trap is used to inform network management system that a delta
fault event (events that are automatically cleared) has occured
or a normal fault event (not automatically cleared) state has
been set on.
Objects are used as follows:
- eventSeqNum is the sequence number of the event. For normal
type of events must equal to the sequence number of the event
in the events table.
- eventEventId specifies what fault event has occured.
- eventName specifies the name of the fault event.
- eventSetTime indicates when fault event has occured
(delta events) or when fault has been set on (normal events).
- eventSeverity reports the severity level of the event.
- eventInstanceType indicates what kind of object is faulty.
- eventInstanceId specifies what instance is faulty.
- eventInstanceName may contain textual description for
the faulty object.
- eventServAffective specifies whether the event is
immediately service affcetive.
- eventDescription reports possible additional information about the event.
- trapPersistence tells whether this event is a delta or normal event.
- trapSenderNodeId specifies the node ID of the sending network element if
configuring it is supported for the network element, otherwise 0.
- trapSenderStatus specifes the trap status.
- sysObjectID specifies what kind of equipment reports the fault event.
For more information see the eventTable specification NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.12.43.27.2.1 |
eventClearedTrapThis trap is used to inform network management system that a normal
type fault event has been cleared (state set off).
Objects are used as follows:
- eventSeqNum is the sequence number of the this clearing event. Note that
the sequence number of the cleared event is reported in the trapRefSeqNum
object.
- eventEventId specifies what event has been cleared.
- eventSetTime indicates when fault event has been cleared.
- eventInstanceType indicates what kind of object has been
faulty.
- eventInstanceId specifies what instance has been faulty.
- trapRefSeqNum specifies the sequence number of the cleared event (i.e.
the sequence number was assigned for the event in the events table).
- trapSenderNodeId specifies the node ID of the sending network element if
configuring it is supported for the network element, otherwise 0.
- sysObjectID specifies what kind of equipment reports the clearing event.
For more information see the eventTable specification NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.12.43.27.2.2 |
multicastPortSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.28 |
multicastPortTable SEQUENCE OF MulticastPortEntry .1.3.6.1.4.1.890.1.5.12.43.28.1 |
multicastPortEntryAn entry in multicastPortTable. MulticastPortEntry .1.3.6.1.4.1.890.1.5.12.43.28.1.1 |
multicastPortImmediateLeaverw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.28.1.1.1 |
multicastPortMaxGroupLimitedrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.28.1.1.2 |
multicastPortMaxOfGroup0..255rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.28.1.1.3 |
multicastPortIgmpFilteringProfilerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.28.1.1.4 |
multicastPortQueryModeSpecify query mode for each portrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.28.1.1.5 |
igmpMsgMaxLimitedrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.28.1.1.6 |
igmpMsgLimit0..255rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.28.1.1.7 |
multicastStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.29 |
multicastStatusTable SEQUENCE OF MulticastStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.1 |
multicastStatusEntryAn entry in multicastStatusTable. MulticastStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.1.1 |
multicastStatusIndexro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.1.1.1 |
multicastStatusVlanIDro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.1.1.2 |
multicastStatusPortro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.1.1.3 |
multicastStatusGroupro IpAddress .1.3.6.1.4.1.890.1.5.12.43.29.1.1.4 |
multicastStatusJoinCounterro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.1.1.5 |
multicastStatusLeaveCounterro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.1.1.6 |
igmpCountTableA count table of igmp query/report/leave message. SEQUENCE OF IgmpCountEntry .1.3.6.1.4.1.890.1.5.12.43.29.2 |
igmpCountEntryAn entry in igmpCountTable. IgmpCountEntry .1.3.6.1.4.1.890.1.5.12.43.29.2.1 |
igmpCountIndexIndex of IgmpCountEntry. 0 means total count in whole systemro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.2.1.1 |
igmpCountInQueryro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.2.1.2 |
igmpCountInReportro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.2.1.3 |
igmpCountInLeavero INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.2.1.4 |
igmpCountInQueryDropro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.2.1.5 |
igmpCountInReportDropro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.2.1.6 |
igmpCountInLeaveDropro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.2.1.7 |
igmpCountOutQueryro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.2.1.8 |
igmpCountOutReportro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.2.1.9 |
igmpCountOutLeavero INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.2.1.10 |
multicastVlanStatusTable SEQUENCE OF MulticastVlanStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.3 |
multicastVlanStatusEntryAn entry in multicastVlanStatusTable. MulticastVlanStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.3.1 |
multicastVlanStatusVlanIDro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.3.1.1 |
multicastVlanStatusTypero Enumeration .1.3.6.1.4.1.890.1.5.12.43.29.3.1.2 |
multicastVlanQueryPortro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.29.3.1.3 |
multicastVlanQuerySrcIpro IpAddress .1.3.6.1.4.1.890.1.5.12.43.29.3.1.4 |
igmpCounterPortTable SEQUENCE OF IgmpCounterPortEntry .1.3.6.1.4.1.890.1.5.12.43.29.4 |
igmpCounterPortEntryAn entry in igmpCounterPortTable. IgmpCounterPortEntry .1.3.6.1.4.1.890.1.5.12.43.29.4.1 |
igmpCounterPortJoinJoin counter for the port.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.4.1.1 |
igmpCounterPortLeaveLeave counter for the port.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.4.1.2 |
igmpCounterPortActiveGroupCurrent active group for the portro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.4.1.3 |
igmpCounterPortQueryQuery counter for the port.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.4.1.4 |
igmpCounterVlanTable SEQUENCE OF IgmpCounterVlanEntry .1.3.6.1.4.1.890.1.5.12.43.29.5 |
igmpCounterVlanEntryAn entry in igmpCounterVlanTable. IgmpCounterVlanEntry .1.3.6.1.4.1.890.1.5.12.43.29.5.1 |
igmpCounterVlanJoinJoin counter for the Vlan.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.5.1.1 |
igmpCounterVlanLeaveLeave counter for the Vlan.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.5.1.2 |
igmpCounterVlanActiveGroupCurrent active group for the Vlanro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.5.1.3 |
igmpCounterVlanQueryQuery counter for the Vlan.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.5.1.4 |
multicastCurrentGroupStatusTable SEQUENCE OF MulticastCurrentGroupStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.6 |
multicastCurrentGroupStatusEntryAn entry in multicastCurrentGroupStatusTable. MulticastCurrentGroupStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.6.1 |
multicastCurrentNumberOfActivePortCurrent number Of active port.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.6.1.1 |
multicastClientSrcIpTable SEQUENCE OF MulticastClientSrcIpEntry .1.3.6.1.4.1.890.1.5.12.43.29.7 |
multicastClientSrcIpEntryAn entry in multicastClientSrcIpTable. MulticastClientSrcIpEntry .1.3.6.1.4.1.890.1.5.12.43.29.7.1 |
multicastClientSrcIpIndexro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.7.1.1 |
multicastClientSrcIpAddressro IpAddress .1.3.6.1.4.1.890.1.5.12.43.29.7.1.2 |
mgmdStatusTable SEQUENCE OF MGMDStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.8 |
mgmdStatusEntryAn entry in mgmdStatusTable. MGMDStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.8.1 |
mgmdStatusIndexro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.8.1.1 |
mgmdStatusVlanIDro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.8.1.2 |
mgmdStatusPortro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.8.1.3 |
mgmdStatusGroupAddressTypeThe address type of the mgmdStatusGroupAddress entry.ro InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.29.8.1.4 |
mgmdStatusGroupAddressro InetAddress .1.3.6.1.4.1.890.1.5.12.43.29.8.1.5 |
mgmdStatusGroupFilterModeThe current cache state, applicable to MGMDv3-compatible
nodes. The value indicates whether the state is INCLUDE or
EXCLUDE.ro Enumeration .1.3.6.1.4.1.890.1.5.12.43.29.8.1.6 |
mgmdCountTableA count table of igmp/MLD query/report/leave message. SEQUENCE OF MGMDCountEntry .1.3.6.1.4.1.890.1.5.12.43.29.9 |
mgmdCountEntryAn entry in mgmdCountTable. MGMDCountEntry .1.3.6.1.4.1.890.1.5.12.43.29.9.1 |
mgmdCountIndexIndex of mgmdCountEntry. 0 means total count in whole systemro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.9.1.1 |
mgmdCountInQueryro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.9.1.2 |
mgmdCountInReportro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.9.1.3 |
mgmdCountInLeavero INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.9.1.4 |
mgmdCountInQueryDropro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.9.1.5 |
mgmdCountInReportDropro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.9.1.6 |
mgmdCountInLeaveDropro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.9.1.7 |
mgmdCountOutQueryro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.9.1.8 |
mgmdCountOutReportro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.9.1.9 |
mgmdCountOutLeavero INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.9.1.10 |
mgmdVlanStatusTable SEQUENCE OF MGMDVlanStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.10 |
mgmdVlanStatusEntryAn entry in mgmdVlanStatusTable. MGMDVlanStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.10.1 |
mgmdVlanStatusVlanIDro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.10.1.1 |
mgmdVlanStatusTypero Enumeration .1.3.6.1.4.1.890.1.5.12.43.29.10.1.2 |
mgmdVlanQueryPortro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.29.10.1.3 |
mgmdVlanQuerySrcIpTypeThe address type of the mgmdVlanQuerySrcIp entry.ro InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.29.10.1.4 |
mgmdVlanQuerySrcIpro InetAddress .1.3.6.1.4.1.890.1.5.12.43.29.10.1.5 |
mgmdCounterPortTable SEQUENCE OF MGMDCounterPortEntry .1.3.6.1.4.1.890.1.5.12.43.29.11 |
mgmdCounterPortEntryAn entry in mgmdCounterPortTable. MGMDCounterPortEntry .1.3.6.1.4.1.890.1.5.12.43.29.11.1 |
mgmdCounterPortReportReport counter for the port.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.11.1.1 |
mgmdCounterPortLeaveLeave counter for the port.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.11.1.2 |
mgmdCounterPortActiveGroupCurrent active group for the portro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.11.1.3 |
mgmdCounterPortQueryQuery counter for the port.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.11.1.4 |
mgmdCounterVlanTable SEQUENCE OF MGMDCounterVlanEntry .1.3.6.1.4.1.890.1.5.12.43.29.12 |
mgmdCounterVlanEntryAn entry in mgmdCounterVlanTable. MGMDCounterVlanEntry .1.3.6.1.4.1.890.1.5.12.43.29.12.1 |
mgmdCounterVlanReportReport counter for the Vlan.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.12.1.1 |
mgmdCounterVlanLeaveLeave counter for the Vlan.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.12.1.2 |
mgmdCounterVlanActiveGroupCurrent active group for the Vlanro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.12.1.3 |
mgmdCounterVlanQueryQuery counter for the Vlan.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.29.12.1.4 |
mgmdCurrentGroupStatusTable SEQUENCE OF MGMDCurrentGroupStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.13 |
mgmdCurrentGroupStatusEntryAn entry in mgmdCurrentGroupStatusTable. MGMDCurrentGroupStatusEntry .1.3.6.1.4.1.890.1.5.12.43.29.13.1 |
mgmdCurrentNumberOfActivePortCurrent number Of active port.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.13.1.1 |
mgmdClientSrcIpTable SEQUENCE OF MGMDClientSrcIpEntry .1.3.6.1.4.1.890.1.5.12.43.29.14 |
mgmdClientSrcIpEntryAn entry in mgmdClientSrcIpTable. MGMDClientSrcIpEntry .1.3.6.1.4.1.890.1.5.12.43.29.14.1 |
mgmdClientSrcIpIndexro INTEGER .1.3.6.1.4.1.890.1.5.12.43.29.14.1.1 |
mgmdClientSrcIpAddressTypero InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.29.14.1.2 |
mgmdClientSrcIpAddressro InetAddress .1.3.6.1.4.1.890.1.5.12.43.29.14.1.3 |
mgmdSrcListTableThe (conceptual) table listing the Source List entries
corresponding to each interface and multicast group pair
on a host. SEQUENCE OF MGMDSrcListEntry .1.3.6.1.4.1.890.1.5.12.43.29.15 |
mgmdSrcListEntryAn entry (conceptual row) in the mgmdSrcListTable. MGMDSrcListEntry .1.3.6.1.4.1.890.1.5.12.43.29.15.1 |
mgmdSrcListAddressTypeThe address type of the InetAddress variables in this
table. This value applies to the mgmdStatusGroupAddress
and mgmdSrcListAddress entries. InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.29.15.1.1 |
mgmdSrcListAddressThe IP multicast group address for which this entry
contains information. InetAddress .1.3.6.1.4.1.890.1.5.12.43.29.15.1.2 |
igmpFilteringProfileSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.30 |
igmpFilteringMaxNumberOfProfilero INTEGER .1.3.6.1.4.1.890.1.5.12.43.30.1 |
igmpFilteringProfileTable SEQUENCE OF IgmpFilteringProfileEntry .1.3.6.1.4.1.890.1.5.12.43.30.2 |
igmpFilteringProfileEntryAn entry in igmpFilteringProfileTable. IgmpFilteringProfileEntry .1.3.6.1.4.1.890.1.5.12.43.30.2.1 |
igmpFilteringProfileNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.30.2.1.1 |
igmpFilteringProfileStartAddressro IpAddress .1.3.6.1.4.1.890.1.5.12.43.30.2.1.2 |
igmpFilteringProfileEndAddressro IpAddress .1.3.6.1.4.1.890.1.5.12.43.30.2.1.3 |
igmpFilteringProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.30.2.1.4 |
mgmdFilterProfileTable SEQUENCE OF MgmdFilterProfileEntry .1.3.6.1.4.1.890.1.5.12.43.30.3 |
mgmdFilterProfileEntryAn entry in mgmdFilterProfileTable.For v4 and v6 address MgmdFilterProfileEntry .1.3.6.1.4.1.890.1.5.12.43.30.3.1 |
mgmdFilterProfileNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.30.3.1.1 |
mgmdFilterProfileAddressTypeThe type of the mgmdFilterProfileStartAddress and mgmdFilterProfileEndAddress address, as defined
in the InetAddress MIB.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.30.3.1.2 |
mgmdFilterProfileStartAddressThe Start IP address of this profile.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.30.3.1.3 |
mgmdFilterProfileEndAddressThe End IP address of this profile.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.30.3.1.4 |
mgmdFilterProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.30.3.1.5 |
mvrSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.31 |
maxNumberOfMVRro INTEGER .1.3.6.1.4.1.890.1.5.12.43.31.1 |
mvrTable SEQUENCE OF MvrEntry .1.3.6.1.4.1.890.1.5.12.43.31.2 |
mvrEntryAn entry in mvrTable. MvrEntry .1.3.6.1.4.1.890.1.5.12.43.31.2.1 |
mvrVlanID1..4094ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.31.2.1.1 |
mvrNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.31.2.1.2 |
mvrModerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.31.2.1.3 |
mvrRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.31.2.1.4 |
mvr8021pPrioritySet the 802.1p priority of control messages within MVR (0~7)rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.31.2.1.5 |
mvrPortTable SEQUENCE OF MvrPortEntry .1.3.6.1.4.1.890.1.5.12.43.31.3 |
mvrPortEntryAn entry in mvrPortTable. MvrPortEntry .1.3.6.1.4.1.890.1.5.12.43.31.3.1 |
mvrPortRolerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.31.3.1.1 |
mvrPortTaggingrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.31.3.1.2 |
maxNumberOfMvrGroupro INTEGER .1.3.6.1.4.1.890.1.5.12.43.31.4 |
mvrGroupTable SEQUENCE OF MvrGroupEntry .1.3.6.1.4.1.890.1.5.12.43.31.5 |
mvrGroupEntryAn entry in mvrGroupTable. MvrGroupEntry .1.3.6.1.4.1.890.1.5.12.43.31.5.1 |
mvrGroupNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.31.5.1.1 |
mvrGroupStartAddressrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.31.5.1.2 |
mvrGroupEndAddressrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.31.5.1.3 |
mvrGroupRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.31.5.1.4 |
mvrBehaviorrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.31.6 |
mvrMgmdGroupTable SEQUENCE OF MvrMgmdGroupEntry .1.3.6.1.4.1.890.1.5.12.43.31.7 |
mvrMgmdGroupEntryAn entry in mvrMgmdGroupTable. MvrMgmdGroupEntry .1.3.6.1.4.1.890.1.5.12.43.31.7.1 |
mvrMgmdGroupNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.31.7.1.1 |
mvrMgmdGroupAddressTyperw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.31.7.1.2 |
mvrMgmdGroupStartAddressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.31.7.1.3 |
mvrMgmdGroupEndAddressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.31.7.1.4 |
mvrMgmdGroupRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.31.7.1.5 |
sysLogSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.33 |
sysLogStatesysLog enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.33.1 |
sysLogTypeTable SEQUENCE OF SysLogTypeEntry .1.3.6.1.4.1.890.1.5.12.43.33.2 |
sysLogTypeEntryAn entry in sysLogTypeTable. SysLogTypeEntry .1.3.6.1.4.1.890.1.5.12.43.33.2.1 |
sysLogTypeIndex INTEGER .1.3.6.1.4.1.890.1.5.12.43.33.2.1.1 |
sysLogTypeNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.33.2.1.2 |
sysLogTypeStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.33.2.1.3 |
sysLogTypeFacilityrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.33.2.1.4 |
sysLogServerTable SEQUENCE OF SysLogServerEntry .1.3.6.1.4.1.890.1.5.12.43.33.3 |
sysLogServerEntryAn entry in sysLogServerTable. SysLogServerEntry .1.3.6.1.4.1.890.1.5.12.43.33.3.1 |
sysLogServerAddress IpAddress .1.3.6.1.4.1.890.1.5.12.43.33.3.1.1 |
sysLogServerLogLevelrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.33.3.1.2 |
sysLogServerRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.33.3.1.3 |
sysLogServerInfoTable SEQUENCE OF SysLogServerInfoEntry .1.3.6.1.4.1.890.1.5.12.43.33.4 |
sysLogServerInfoEntryAn entry in sysLogServerInfoTable. SysLogServerInfoEntry .1.3.6.1.4.1.890.1.5.12.43.33.4.1 |
sysLogServerInfoIpAddrType InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.33.4.1.1 |
sysLogServerInfoIpAddr InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.33.4.1.2 |
sysLogServerInfoLogLevelrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.33.4.1.3 |
sysLogServerInfoRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.33.4.1.4 |
diffservSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.34 |
diffservStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.34.1 |
diffservMapTable SEQUENCE OF DiffservMapEntry .1.3.6.1.4.1.890.1.5.12.43.34.2 |
diffservMapEntryAn entry in diffservMapTable. DiffservMapEntry .1.3.6.1.4.1.890.1.5.12.43.34.2.1 |
diffservMapDscp0-63ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.34.2.1.1 |
diffservMapPriority0-7rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.34.2.1.2 |
diffservPortTable SEQUENCE OF DiffservPortEntry .1.3.6.1.4.1.890.1.5.12.43.34.3 |
diffservPortEntryAn entry in diffservPortTable. DiffservPortEntry .1.3.6.1.4.1.890.1.5.12.43.34.3.1 |
diffservPortStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.34.3.1.1 |
vturInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.37 |
vturInfoTable SEQUENCE OF VturInfoEntry .1.3.6.1.4.1.890.1.5.12.43.37.1 |
vturInfoEntryAn entry in vturInfoTable. VturInfoEntry .1.3.6.1.4.1.890.1.5.12.43.37.1.1 |
vturNameDisplay remote device namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.37.1.1.1 |
vturSysVersionDisplay remote device system version inforo DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.37.1.1.2 |
vturModemCodeVersionDisplay remote device VDSL modem code version inforo DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.37.1.1.3 |
protoBasedVlanSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.38 |
protoBasedVlanTable SEQUENCE OF ProtoBasedVlanEntry .1.3.6.1.4.1.890.1.5.12.43.38.1 |
protoBasedVlanEntryAn entry in protoBasedVlanTable. ProtoBasedVlanEntry .1.3.6.1.4.1.890.1.5.12.43.38.1.1 |
protoBasedVlanPortro INTEGER .1.3.6.1.4.1.890.1.5.12.43.38.1.1.1 |
protoBasedVlanPacketTypero Enumeration .1.3.6.1.4.1.890.1.5.12.43.38.1.1.2 |
protoBasedVlanEtherTypero INTEGER .1.3.6.1.4.1.890.1.5.12.43.38.1.1.3 |
protoBasedVlanNamerw DisplayString .1.3.6.1.4.1.890.1.5.12.43.38.1.1.4 |
protoBasedVlanVidrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.38.1.1.5 |
protoBasedVlanPriorityrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.38.1.1.6 |
protoBasedVlanStaterw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.38.1.1.7 |
classifierSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.39 |
classifierRuleTable SEQUENCE OF ClassifierRuleEntry .1.3.6.1.4.1.890.1.5.12.43.39.1 |
classifierRuleEntryAn entry in classifierRuleTable. ClassifierRuleEntry .1.3.6.1.4.1.890.1.5.12.43.39.1.1 |
classifierNameName of classifier rule.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.39.1.1.1 |
classifierEnableClassifier rule enabled/disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.39.1.1.2 |
classifierPacketFormatPacket format for classifier rule. All(1), 802.3 untagged(2), 802.3 tagged(3), EthernetII untagged(4), EthernetII tagged(5).rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.39.1.1.3 |
classifierVlanIdVlan id for classifer rule, 1~4094.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.4 |
classifier8021pPriority802.1p priority for classifier rule, 0~7.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.5 |
classifierEtherTypeEther type for classifier rule, in decimal expression.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.6 |
classifierSrcMACSource mac address for classifier rulerw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.39.1.1.7 |
classifierIncomingPortIncoming Port for classifier rulerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.8 |
classifierDstMACDestination mac address for classifier rulerw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.39.1.1.9 |
classifierDSCPDSCP for classifier rulerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.10 |
classifierIpProtocolIP Protocol for classifier rulerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.11 |
classifierEstablishOnlyIP Protocol for EstablishOnly for classifier rulerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.39.1.1.12 |
classifierSrcIpSource IP address for classifier rulerw IpAddress .1.3.6.1.4.1.890.1.5.12.43.39.1.1.13 |
classifierSrcIpMaskSource IP Mask for classifier rulerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.14 |
classifierSrcSocketSource Socket Number for classifier rulerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.15 |
classifierDstIpDestination IP address for classifier rulerw IpAddress .1.3.6.1.4.1.890.1.5.12.43.39.1.1.16 |
classifierDstIpMaskDestination IP Mask for classifier rulerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.17 |
classifierDstSocketDestination Socket Number for classifier rulerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.18 |
classifierRowstatusRow Status for classifier rulerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.39.1.1.19 |
classifierSrcIpv6Source IPv6 address for classifier rulerw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.890.1.5.12.43.39.1.1.20 |
classifierSrcIpv6MaskSource IPv6 Mask for classifier rulerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.21 |
classifierDstIpv6Destination IPv6 address for classifier rulerw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.890.1.5.12.43.39.1.1.22 |
classifierDstIpv6MaskDestination IPv6 Mask for classifier rulerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.39.1.1.23 |
classifierRuleSetclassifier Rule Set.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.39.2 |
policySetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.40 |
policyTable SEQUENCE OF PolicyEntry .1.3.6.1.4.1.890.1.5.12.43.40.1 |
policyEntryAn entry in policyTable. PolicyEntry .1.3.6.1.4.1.890.1.5.12.43.40.1.1 |
policyNameName of policy rule.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.40.1.1.1 |
policyEnablePolicy rule enabled/disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.40.1.1.2 |
policyClassifierClassifier of policy rule.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.40.1.1.3 |
policyVlanIdVlan id for policy rule, 1~4094.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.40.1.1.4 |
policyEgressPortEgress Port for policy rulerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.40.1.1.5 |
policyOutPktFormatOutgoing packet format for Egress port for policy rulerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.40.1.1.6 |
policy8021pPriority802.1p priority for policy rule, 0~7.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.40.1.1.7 |
policyDSCPDSCP for policy rule.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.40.1.1.8 |
policyTOSTOS for policy rule, 0~7rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.40.1.1.9 |
policyBandwidthBandwidth for policy rulerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.40.1.1.10 |
policyOutOfProfileDSCPOut Of Profile DSCP for policy rule.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.40.1.1.11 |
policyForwardingActionForwarding Action for policy rulerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.40.1.1.12 |
policyPriorityActionPriority Action for policy rulerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.40.1.1.13 |
policyDiffServActionDiffServ Action for policy rulerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.40.1.1.14 |
policyOutgoingActionOutgoing Action for policy rulerw Bits .1.3.6.1.4.1.890.1.5.12.43.40.1.1.15 |
policyMeteringEnableMetering for Policy rule enabled/disabled.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.40.1.1.16 |
policyOutOfProfileActionOut Of Profile Action for policy rulerw Bits .1.3.6.1.4.1.890.1.5.12.43.40.1.1.17 |
policyRowstatusRow Status for policy rulerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.40.1.1.18 |
policyRuleSetpolicy Rule Set.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.40.2 |
switchCounterStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.42 |
vlanCounterTable SEQUENCE OF VlanCounterEntry .1.3.6.1.4.1.890.1.5.12.43.42.1 |
vlanCounterEntryAn entry in vlanCounterTable. VlanCounterEntry .1.3.6.1.4.1.890.1.5.12.43.42.1.1 |
vlanCounterTxPktsro Counter32 .1.3.6.1.4.1.890.1.5.12.43.42.1.1.1 |
vlanCounterRxPktsro Counter32 .1.3.6.1.4.1.890.1.5.12.43.42.1.1.2 |
switchCounterTable SEQUENCE OF SwitchCounterEntry .1.3.6.1.4.1.890.1.5.12.43.42.2 |
switchCounterEntryAn entry in switchCounterTable. SwitchCounterEntry .1.3.6.1.4.1.890.1.5.12.43.42.2.1 |
switchUnknownUnicastCounterUnknown unicast counter for the port.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.42.2.1.1 |
vlanCounterResetTable SEQUENCE OF VlanCounterResetEntry .1.3.6.1.4.1.890.1.5.12.43.42.3 |
vlanCounterResetEntryAn entry in vlanCounterTable. VlanCounterResetEntry .1.3.6.1.4.1.890.1.5.12.43.42.3.1 |
vlanCounterResetClear VLAN counters.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.42.3.1.1 |
vlanCounterSwitchSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.42.4 |
vlanCounterSwitchSwitch VLAN counters on/off.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.42.4.1 |
vlanCounterVlanVLAN counter per vlan.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.42.4.2 |
vlanCounterPortVLAN counters per port.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.42.4.3 |
vlanCounterDirectionVLAN counters per direction.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.42.4.4 |
rateLimitProfilePortSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.43 |
rateLimitProfilePortTable SEQUENCE OF RateLimitProfilePortEntry .1.3.6.1.4.1.890.1.5.12.43.43.1 |
rateLimitProfilePortEntryAn entry in rateLimitProfilePortTable. RateLimitProfilePortEntry .1.3.6.1.4.1.890.1.5.12.43.43.1.1 |
rateLimitPortProfilerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.43.1.1.1 |
perQueueProfilePortTable SEQUENCE OF PerQueueProfilePortEntry .1.3.6.1.4.1.890.1.5.12.43.43.2 |
perQueueProfilePortEntryAn entry in perQueueProfilePortTable. PerQueueProfilePortEntry .1.3.6.1.4.1.890.1.5.12.43.43.2.1 |
perQueuePortProfilerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.43.2.1.1 |
rateLimitProfileSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.44 |
rateLimitMaxNumberOfProfilero INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.1 |
rateLimitProfileTable SEQUENCE OF RateLimitProfileEntry .1.3.6.1.4.1.890.1.5.12.43.44.2 |
rateLimitProfileEntryAn entry in rateLimitMaxNumberOfProfile. RateLimitProfileEntry .1.3.6.1.4.1.890.1.5.12.43.44.2.1 |
rateLimitProfileNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.44.2.1.1 |
rateLimitProfilePeakRatePeak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.2.1.2 |
rateLimitProfileEgrRateEgress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.2.1.3 |
rateLimitProfileCommitRateCommit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.2.1.4 |
rateLimitProfilePeakStateIngress peak rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.44.2.1.5 |
rateLimitProfileEgrStateEgress rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.44.2.1.6 |
rateLimitProfileCommitStateIngress commit rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.44.2.1.7 |
rateLimitProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.44.2.1.8 |
perQueueMaxNumberOfProfilero INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.3 |
perQueueProfileTable SEQUENCE OF PerQueueProfileEntry .1.3.6.1.4.1.890.1.5.12.43.44.4 |
perQueueProfileEntryAn entry in perQueueMaxNumberOfProfile. PerQueueProfileEntry .1.3.6.1.4.1.890.1.5.12.43.44.4.1 |
perQueueProfileNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.44.4.1.1 |
perQueueProfileQ0CIRCommit rate of Queue0 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.2 |
perQueueProfileQ0PIRPeak rate of Queue0 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.3 |
perQueueProfileQ1CIRCommit rate of Queue1 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.4 |
perQueueProfileQ1PIRPeak rate of Queue1 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.5 |
perQueueProfileQ2CIRCommit rate of Queue2 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.6 |
perQueueProfileQ2PIRPeak rate of Queue2 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.7 |
perQueueProfileQ3CIRCommit rate of Queue3 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.8 |
perQueueProfileQ3PIRPeak rate of Queue3 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.9 |
perQueueProfileQ4CIRCommit rate of Queue4 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.10 |
perQueueProfileQ4PIRPeak rate of Queue4 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.11 |
perQueueProfileQ5CIRCommit rate of Queue5 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.12 |
perQueueProfileQ5PIRPeak rate of Queue5 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.13 |
perQueueProfileQ6CIRCommit rate of Queue6 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.14 |
perQueueProfileQ6PIRPeak rate of Queue6 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.15 |
perQueueProfileQ7CIRCommit rate of Queue7 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.16 |
perQueueProfileQ7PIRPeak rate of Queue7 in Kbit/s. The range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.44.4.1.17 |
perQueueProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.44.4.1.18 |
vlanSecuritySetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.45 |
vlanSecurityTable SEQUENCE OF VlanSecurityEntry .1.3.6.1.4.1.890.1.5.12.43.45.1 |
vlanSecurityEntryAn entry in vlanSecurityTable. VlanSecurityEntry .1.3.6.1.4.1.890.1.5.12.43.45.1.1 |
vlanSecurityCountNumber of (dynamic) MAC addresses that may be learned on the VID.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.45.1.1.1 |
cfmSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.46 |
cfmLoopbackPortTable SEQUENCE OF CfmLoopbackPortEntry .1.3.6.1.4.1.890.1.5.12.43.46.1 |
cfmLoopbackPortEntryAn entry in cfmLoopbackPortTable. CfmLoopbackPortEntry .1.3.6.1.4.1.890.1.5.12.43.46.1.1 |
cfmLoopbackPortStateCFM loopback enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.46.1.1.1 |
cfmMIPTable SEQUENCE OF CfmMIPEntry .1.3.6.1.4.1.890.1.5.12.43.46.2 |
cfmMIPEntryAn entry in cfmMIPTable. CfmMIPEntry .1.3.6.1.4.1.890.1.5.12.43.46.2.1 |
cfmPortro INTEGER .1.3.6.1.4.1.890.1.5.12.43.46.2.1.1 |
cfmVlanIDro INTEGER .1.3.6.1.4.1.890.1.5.12.43.46.2.1.2 |
cfmLevelro INTEGER .1.3.6.1.4.1.890.1.5.12.43.46.2.1.3 |
cfmMIPRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.46.2.1.4 |
cfmActionEnableStatusCFM Action enable status for the CO devicerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.46.3 |
mrstp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.48 |
mrstpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.48.1 |
mrstpBridgeTable SEQUENCE OF MrstpBridgeEntry .1.3.6.1.4.1.890.1.5.12.43.48.1.1 |
mrstpBridgeEntryAn entry in mrstpBridgeTable. MrstpBridgeEntry .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1 |
mrstpBridgeIndexThe tree index of the MRSTP.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.1 |
mrstpStateEnabled/disabled on the mrstp bridge.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.2 |
mrstpProtocolSpecificationAn indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined.ro Enumeration .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.3 |
mrstpPriorityThe value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
dot1dBaseBridgeAddress.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.4 |
mrstpTimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.5 |
mrstpTopChangesThe total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.6 |
mrstpDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.7 |
mrstpRootCostThe cost of the path to the root as seen from
this bridge.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.8 |
mrstpRootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.9 |
mrstpMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.10 |
mrstpHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.11 |
mrstpHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.12 |
mrstpForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
mrstpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.13 |
mrstpBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mrstpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.14 |
mrstpBridgeHelloTimeThe value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds.rw Timeout .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.15 |
mrstpBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mrstpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.16 |
mrstpPortTableA table that contains port-specific information
for the Spanning Tree Protocol. SEQUENCE OF MrstpPortEntry .1.3.6.1.4.1.890.1.5.12.43.48.1.2 |
mrstpPortEntryA list of information maintained by every port
about the Spanning Tree Protocol state for that
port. MrstpPortEntry .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1 |
mrstpPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.1 |
mrstpPortPriorityThe value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
mrstpPort.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.2 |
mrstpPortStateThe port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see mrstpPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.3 |
mrstpPortEnableThe enabled/disabled status of the port.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.4 |
mrstpPortPathCostThe contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.5 |
mrstpPortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.6 |
mrstpPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.7 |
mrstpPortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.8 |
mrstpPortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.9 |
mrstpPortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.10 |
mrstpPortOnBridgeIndexIndetify the bridge index that this port joined to in MRSTP.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.11 |
mrstpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.48.2 |
newRoot NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.12.43.48.2.1 |
topologyChange NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.12.43.48.2.2 |
dhcpSnp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.49 |
dhcpSnpVlanTable SEQUENCE OF DhcpSnpVlanEntry .1.3.6.1.4.1.890.1.5.12.43.49.1 |
dhcpSnpVlanEntry DhcpSnpVlanEntry .1.3.6.1.4.1.890.1.5.12.43.49.1.1 |
dhcpSnpVlanEntryVidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.1.1.1 |
dhcpSnpVlanEntryEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.49.1.1.2 |
dhcpSnpVlanEntryOption82Enablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.49.1.1.3 |
dhcpSnpVlanEntryInforw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.49.1.1.4 |
dhcpSnpVlanEntryRemoteIDrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.49.1.1.5 |
dhcpSnpPortTable SEQUENCE OF DhcpSnpPortEntry .1.3.6.1.4.1.890.1.5.12.43.49.2 |
dhcpSnpPortEntry DhcpSnpPortEntry .1.3.6.1.4.1.890.1.5.12.43.49.2.1 |
dhcpSnpPortEntryPortro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.2.1.1 |
dhcpSnpPortEntryTrustrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.49.2.1.2 |
dhcpSnpPortEntryRate0 means unlimitedrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.2.1.3 |
dhcpSnpBindTable SEQUENCE OF DhcpSnpBindEntry .1.3.6.1.4.1.890.1.5.12.43.49.3 |
dhcpSnpBindEntry DhcpSnpBindEntry .1.3.6.1.4.1.890.1.5.12.43.49.3.1 |
dhcpSnpBindEntryMacro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.49.3.1.1 |
dhcpSnpBindEntryVidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.3.1.2 |
dhcpSnpBindEntryIPro IpAddress .1.3.6.1.4.1.890.1.5.12.43.49.3.1.3 |
dhcpSnpBindEntryLeasero INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.3.1.4 |
dhcpSnpBindEntryTypero Enumeration .1.3.6.1.4.1.890.1.5.12.43.49.3.1.5 |
dhcpSnpBindEntryPortro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.3.1.6 |
dhcpSnpEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.49.4 |
dhcpSnpDb OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.49.5 |
dhcpSnpDbAbortrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.1 |
dhcpSnpDbWriteDelayrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.2 |
dhcpSnpDbUrlrw DisplayString .1.3.6.1.4.1.890.1.5.12.43.49.5.3 |
dhcpSnpDbUrlRenewrw DisplayString .1.3.6.1.4.1.890.1.5.12.43.49.5.4 |
dhcpSnpDbStat OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.49.5.5 |
dhcpSnpDbStatClearrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.49.5.5.1 |
dhcpSnpDbStatAgentRunningro Enumeration .1.3.6.1.4.1.890.1.5.12.43.49.5.5.2 |
dhcpSnpDbStatDelayExpiryro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.3 |
dhcpSnpDbStatAbortExpiryro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.4 |
dhcpSnpDbStatLastSuccTimero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.49.5.5.5 |
dhcpSnpDbStatLastFailTimero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.49.5.5.6 |
dhcpSnpDbStatLastFailReasonro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.49.5.5.7 |
dhcpSnpDbStatTotalAttemptro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.8 |
dhcpSnpDbStatStartupFailro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.9 |
dhcpSnpDbStatSuccTransro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.10 |
dhcpSnpDbStatFailTransro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.11 |
dhcpSnpDbStatSuccReadro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.12 |
dhcpSnpDbStatFailReadro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.13 |
dhcpSnpDbStatSuccWritero INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.14 |
dhcpSnpDbStatFailWritero INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.15 |
dhcpSnpDbStatFirstSuccAccessro Enumeration .1.3.6.1.4.1.890.1.5.12.43.49.5.5.16 |
dhcpSnpDbStatLastIgnoreBindColLast ignored: binding collisionro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.17 |
dhcpSnpDbStatLastIgnoreExpireLeaseLast ignored: expired leasesro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.18 |
dhcpSnpDbStatLastIgnoreInvalidIntfLast ignored: invalid interfacero INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.19 |
dhcpSnpDbStatLastIgnoreUnsuppVlanLast ignored: unsupported vlansro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.20 |
dhcpSnpDbStatLastIgnoreParseLast ignored: parsing errorro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.21 |
dhcpSnpDbStatTotalIgnoreBindColTotal ignored: binding collisionro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.22 |
dhcpSnpDbStatTotalIgnoreExpireLeaseTotal ignored: expired leasesro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.23 |
dhcpSnpDbStatTotalIgnoreInvalidIntfTotal ignored: invalid interfacero INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.24 |
dhcpSnpDbStatTotalIgnoreUnsuppVlanTotal ignored: unsupported vlansro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.25 |
dhcpSnpDbStatTotalIgnoreParseTotal ignored: parsing errorro INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.5.5.26 |
dhcpSnpDbStatFirstSuccessAccessFirst Success Accessro Enumeration .1.3.6.1.4.1.890.1.5.12.43.49.5.5.27 |
dhcpSnpDhcpVlan OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.49.6 |
dhcpSnpDhcpVlanVid0: disable DHCP VLAN.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.49.6.1 |
ipsg OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.50 |
ipsgTable SEQUENCE OF IpsgEntry .1.3.6.1.4.1.890.1.5.12.43.50.1 |
ipsgEntry IpsgEntry .1.3.6.1.4.1.890.1.5.12.43.50.1.1 |
ipsgEntryMacro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.50.1.1.1 |
ipsgEntryVidro INTEGER (1.. 4094) .1.3.6.1.4.1.890.1.5.12.43.50.1.1.2 |
ipsgEntryIprw IpAddress .1.3.6.1.4.1.890.1.5.12.43.50.1.1.3 |
ipsgEntryLeasesecondro INTEGER .1.3.6.1.4.1.890.1.5.12.43.50.1.1.4 |
ipsgEntryTypero Enumeration .1.3.6.1.4.1.890.1.5.12.43.50.1.1.5 |
ipsgEntryPort0 means any portrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.50.1.1.6 |
ipsgEntryStaterw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.50.1.1.7 |
arpInspect OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.51 |
arpInspectSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.51.1 |
arpInspectStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.51.1.1 |
arpInspectFilterAgingTimerw INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.1.2 |
arpInspectLog OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.51.1.3 |
arpInspectLogEntriesrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.1.3.1 |
arpInspectLogRaterw INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.1.3.2 |
arpInspectLogIntervalrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.1.3.3 |
arpInspectVlanTable SEQUENCE OF ArpInspectVlanEntry .1.3.6.1.4.1.890.1.5.12.43.51.1.4 |
arpInspectVlanEntry ArpInspectVlanEntry .1.3.6.1.4.1.890.1.5.12.43.51.1.4.1 |
arpInspectVlanVidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.1.4.1.1 |
arpInspectVlanLogrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.51.1.4.1.2 |
arpInspectVlanStatusrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.51.1.4.1.3 |
arpInspectPortTable SEQUENCE OF ArpInspectPortEntry .1.3.6.1.4.1.890.1.5.12.43.51.1.5 |
arpInspectPortEntry ArpInspectPortEntry .1.3.6.1.4.1.890.1.5.12.43.51.1.5.1 |
arpInspectPortIndexro INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.1 |
arpInspectPortTrustrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.2 |
arpInspectPortRaterw INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.3 |
arpInspectPortIntervalrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.4 |
arpInspectStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.51.2 |
arpInspectFilterClearrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.51.2.1 |
arpInspectLogClearrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.51.2.2 |
arpInspectFilterTable SEQUENCE OF ArpInspectFilterEntry .1.3.6.1.4.1.890.1.5.12.43.51.2.3 |
arpInspectFilterEntry ArpInspectFilterEntry .1.3.6.1.4.1.890.1.5.12.43.51.2.3.1 |
arpInspectFilterMacro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.1 |
arpInspectFilterVidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.2 |
arpInspectFilterPortro INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.3 |
arpInspectFilterExpiryro INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.4 |
arpInspectFilterReasonro Enumeration .1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.5 |
arpInspectFilterRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.6 |
arpInspectLogTable SEQUENCE OF ArpInspectLogEntry .1.3.6.1.4.1.890.1.5.12.43.51.2.4 |
arpInspectLogEntry ArpInspectLogEntry .1.3.6.1.4.1.890.1.5.12.43.51.2.4.1 |
arpInspectLogMacro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.1 |
arpInspectLogVidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.2 |
arpInspectLogPortro INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.3 |
arpInspectLogIpro IpAddress .1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.4 |
arpInspectLogNumPktro INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.5 |
arpInspectLogReasonro Enumeration .1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.6 |
arpInspectLogTimero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.7 |
arpInspectStatisticsTable SEQUENCE OF ArpInspectStatisticsEntry .1.3.6.1.4.1.890.1.5.12.43.51.2.5 |
arpInspectStatisticsEntry ArpInspectStatisticsEntry .1.3.6.1.4.1.890.1.5.12.43.51.2.5.1 |
arpInspectStatisticsVidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.1 |
arpInspectStatisticsReceivedro Counter32 .1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.2 |
arpInspectStatisticsRequestro Counter32 .1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.3 |
arpInspectStatisticsReplyro Counter32 .1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.4 |
arpInspectStatisticsForwardro Counter32 .1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.5 |
arpInspectStatisticsDropro Counter32 .1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.6 |
arpInspectStatisticsClearrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.7 |
trTCMSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.52 |
trTCMStateTwo-rate three color marker enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.52.1 |
trTCMModerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.52.2 |
trTCMPortTable SEQUENCE OF TrTCMPortEntry .1.3.6.1.4.1.890.1.5.12.43.52.3 |
trTCMPortEntryAn entry in trTCMPortTable. TrTCMPortEntry .1.3.6.1.4.1.890.1.5.12.43.52.3.1 |
trTCMPortStateTwo-rate three color marker enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.52.3.1.1 |
trTCMPortCIRAllowed CIR in pkts/s.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.52.3.1.2 |
trTCMPortPIRAllowed PIR in pkts/s.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.52.3.1.3 |
trTCMPortDscpGreen0-63rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.52.3.1.4 |
trTCMPortDscpYellow0-63rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.52.3.1.5 |
trTCMPortDscpRed0-63rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.52.3.1.6 |
loopGuardSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.53 |
loopGuardStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.53.1 |
loopGuardPortTable SEQUENCE OF LoopGuardPortEntry .1.3.6.1.4.1.890.1.5.12.43.53.2 |
loopGuardPortEntryAn entry in loopGuardPortTable. LoopGuardPortEntry .1.3.6.1.4.1.890.1.5.12.43.53.2.1 |
loopGuardPortStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.53.2.1.1 |
loopGuardPortModeSpecify loopguard mode for each portrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.53.2.1.2 |
loopGuardPortRecoverTimerecover time to activate port in seconds.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.53.2.1.3 |
subnetBasedVlanSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.54 |
subnetBasedVlanStatesubnet-based vlan feature enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.54.1 |
dhcpVlanOverrideStatedhcp vlan override enabled/disabled when subnet-based vlan is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.54.2 |
subnetBasedVlanTable SEQUENCE OF SubnetBasedVlanEntry .1.3.6.1.4.1.890.1.5.12.43.54.3 |
subnetBasedVlanEntryAn entry in subnetBasedVlanTable. SubnetBasedVlanEntry .1.3.6.1.4.1.890.1.5.12.43.54.3.1 |
subnetBasedVlanSrcIpsource ip for subnet-based vlan entry IpAddress .1.3.6.1.4.1.890.1.5.12.43.54.3.1.1 |
subnetBasedVlanSrcMaskBitsource ip mask-bits for subnet-based vlan entry INTEGER .1.3.6.1.4.1.890.1.5.12.43.54.3.1.2 |
subnetBasedVlanNamename for subnet-based vlan entryrw DisplayString .1.3.6.1.4.1.890.1.5.12.43.54.3.1.3 |
subnetBasedVlanVidvid for subnet-based vlan entryrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.54.3.1.4 |
subnetBasedVlanPrioritypriority for subnet-based vlan entryrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.54.3.1.5 |
subnetBasedVlanEntryStaterw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.54.3.1.6 |
subnetBasedVlanInfoTable SEQUENCE OF SubnetBasedVlanInfoEntry .1.3.6.1.4.1.890.1.5.12.43.54.4 |
subnetBasedVlanInfoEntryAn entry in subnetBasedVlanInfoTable. SubnetBasedVlanInfoEntry .1.3.6.1.4.1.890.1.5.12.43.54.4.1 |
subnetBasedVlanInfoSrcIpTypeIp type for subnet-based vlan entry InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.54.4.1.1 |
subnetBasedVlanInfoSrcIpsource ip of IPv4 or IPv6 for subnet-based vlan entry InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.54.4.1.2 |
subnetBasedVlanInfoSrcMaskBitsource ip mask-bits for subnet-based vlan entry INTEGER .1.3.6.1.4.1.890.1.5.12.43.54.4.1.3 |
subnetBasedVlanInfoNamename for subnet-based vlan entryrw DisplayString .1.3.6.1.4.1.890.1.5.12.43.54.4.1.4 |
subnetBasedVlanInfoVidvid for subnet-based vlan entryrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.54.4.1.5 |
subnetBasedVlanInfoPrioritypriority for subnet-based vlan entryrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.54.4.1.6 |
subnetBasedVlanInfoEntryStaterw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.54.4.1.7 |
macAuthenticationSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.55 |
macAuthenticationStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.55.1 |
macAuthenticationNamePrefixrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.55.2 |
macAuthenticationPasswordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.55.3 |
macAuthenticationTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.55.4 |
macAuthenticationPortTable SEQUENCE OF MacAuthenticationPortEntry .1.3.6.1.4.1.890.1.5.12.43.55.5 |
macAuthenticationPortEntryAn entry in macAuthenticationPortTable. MacAuthenticationPortEntry .1.3.6.1.4.1.890.1.5.12.43.55.5.1 |
macAuthenticationPortStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.55.5.1.1 |
mstp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.56 |
mstpGen OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.56.1 |
mstpGenStateEnabled/disabled on the mrstp bridge.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.56.1.1 |
mstpGenCfgIdNameThe configuration name that identifies the MST
region and is used as one of the inputs in the
computation of the MST Configuration Identifier.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.56.1.2 |
mstpGenCfgIdRevLevelThis object identifies the MST revision that
identifies the MST region and is used as one
of the inputs in the computation of the MST
configuration Identifier.rw Integer32 .1.3.6.1.4.1.890.1.5.12.43.56.1.3 |
mstpGenCfgIdCfgDigestConfiguration Digest.ro OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.56.1.4 |
mstpGenHelloTimerw Timeout .1.3.6.1.4.1.890.1.5.12.43.56.1.5 |
mstpGenMaxAgerw Timeout .1.3.6.1.4.1.890.1.5.12.43.56.1.6 |
mstpGenForwardDelayrw Timeout .1.3.6.1.4.1.890.1.5.12.43.56.1.7 |
mstpGenMaxHops13.22.f)rw Integer32 .1.3.6.1.4.1.890.1.5.12.43.56.1.8 |
mstpGenCistRootPathCost.ro Integer32 .1.3.6.1.4.1.890.1.5.12.43.56.1.9 |
mstpGenCistRootBrid.ro OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.56.1.10 |
mstMapTableThis table contains one entry for each instance of MSTP. SEQUENCE OF MstMapEntry .1.3.6.1.4.1.890.1.5.12.43.56.20 |
mstMapEntryA conceptual row containing the status of the MSTP instance. MstMapEntry .1.3.6.1.4.1.890.1.5.12.43.56.20.1 |
mstMapIndexUniquely identifies an instance. The entry of this table with index 0
presents always, represents CIST. When SET operation MstiOrCistInstanceIndex .1.3.6.1.4.1.890.1.5.12.43.56.20.1.1 |
mstMapVlans1kA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not current.rw OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.56.20.1.2 |
mstMapVlans2kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not current.rw OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.56.20.1.3 |
mstMapVlans3kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not current.rw OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.56.20.1.4 |
mstMapVlans4kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not current.rw OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.56.20.1.5 |
mstMapRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.56.20.1.6 |
mstVlanTableThis table contains one entry for each VlanId. SEQUENCE OF MstVlanEntry .1.3.6.1.4.1.890.1.5.12.43.56.30 |
mstVlanEntryInformation regarding the instance to which each Vlan is mapped. MstVlanEntry .1.3.6.1.4.1.890.1.5.12.43.56.30.1 |
mstVlanIndexThe VlanId for which this entry contains the instance mapped. INTEGER .1.3.6.1.4.1.890.1.5.12.43.56.30.1.1 |
mstVlanMstIndexAn integer with values ranging from 0 to 64 that identify a
the CIST/MSTI instance to which this VLAN is mappedro MstiOrCistInstanceIndex .1.3.6.1.4.1.890.1.5.12.43.56.30.1.2 |
mstpPortTableA table that contains generic information about
every port that is associated with this bridge. SEQUENCE OF MstpPortEntry .1.3.6.1.4.1.890.1.5.12.43.56.40 |
mstpPortEntryA list of information for each port of the
bridge. MstpPortEntry .1.3.6.1.4.1.890.1.5.12.43.56.40.1 |
mstpPortIndexA unique value, greater than zero, for each Port.
The value for each interface sub-layer
must remain constant at least from one re-initialization
of the entity's network management system to the next re-
initialization. INTEGER .1.3.6.1.4.1.890.1.5.12.43.56.40.1.1 |
mstpPortOperEdgePortro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.56.40.1.2 |
mstpPortOperPointToPointMACro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.56.40.1.3 |
mstpXstTable. SEQUENCE OF MstpXstEntry .1.3.6.1.4.1.890.1.5.12.43.56.50 |
mstpXstEntry. MstpXstEntry .1.3.6.1.4.1.890.1.5.12.43.56.50.1 |
mstpXstId0 means CIST.ro MstiOrCistInstanceIndex .1.3.6.1.4.1.890.1.5.12.43.56.50.1.1 |
mstpXstBridgePriorityBridge priority, in steps of 4096.rw Integer32 .1.3.6.1.4.1.890.1.5.12.43.56.50.1.2 |
mstpXstBridgeId.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.56.50.1.3 |
mstpXstInternalRootCost.ro Integer32 .1.3.6.1.4.1.890.1.5.12.43.56.50.1.4 |
mstpXstRootPort.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.56.50.1.5 |
mstpXstTimeSinceTopologyChange.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.890.1.5.12.43.56.50.1.6 |
mstpXstTopologyChangesCount.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.56.50.1.7 |
mstpXstPortTable. SEQUENCE OF MstpXstPortEntry .1.3.6.1.4.1.890.1.5.12.43.56.60 |
mstpXstPortEntry. MstpXstPortEntry .1.3.6.1.4.1.890.1.5.12.43.56.60.1 |
mstpXstPortXstId0 means CIST. MstiOrCistInstanceIndex .1.3.6.1.4.1.890.1.5.12.43.56.60.1.1 |
mstpXstPortIndexThe value of mstpPortIndex of the Port
in mstpPortTable.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.56.60.1.2 |
mstpXstPortEnable.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.56.60.1.3 |
mstpXstPortPriorityPort priority, in steps of 16.rw Integer32 .1.3.6.1.4.1.890.1.5.12.43.56.60.1.4 |
mstpXstPortPathCost.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.56.60.1.5 |
mstpXstPortState.ro Enumeration .1.3.6.1.4.1.890.1.5.12.43.56.60.1.6 |
mstpXstPortDesignatedRoot.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.56.60.1.7 |
mstpXstPortDesignatedCost.ro Integer32 .1.3.6.1.4.1.890.1.5.12.43.56.60.1.8 |
mstpXstPortDesignatedBridge.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.56.60.1.9 |
mstpXstPortDesignatedPort.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.56.60.1.10 |
mstpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.56.70 |
mstpNewRoot NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.12.43.56.70.1 |
mstpTopologyChange NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.12.43.56.70.2 |
radiusServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.57 |
radiusAuthServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.57.1 |
radiusAuthServerModerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.57.1.1 |
radiusAuthServerTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.57.1.2 |
radiusAuthServerTable SEQUENCE OF RadiusAuthServerEntry .1.3.6.1.4.1.890.1.5.12.43.57.1.3 |
radiusAuthServerEntryAn entry in radiusAuthServerTable. RadiusAuthServerEntry .1.3.6.1.4.1.890.1.5.12.43.57.1.3.1 |
radiusAuthServerIndex INTEGER .1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.1 |
radiusAuthServerIpAddrIPv4 onlyrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.2 |
radiusAuthServerUdpPortrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.3 |
radiusAuthServerSharedSecretrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.4 |
radiusAuthServerIpAddressTypero InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.5 |
radiusAuthServerIpAddressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.6 |
radiusAcctServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.57.2 |
radiusAcctServerTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.57.2.1 |
radiusAcctServerTable SEQUENCE OF RadiusAcctServerEntry .1.3.6.1.4.1.890.1.5.12.43.57.2.2 |
radiusAcctServerEntryAn entry in radiusAcctServerTable. RadiusAcctServerEntry .1.3.6.1.4.1.890.1.5.12.43.57.2.2.1 |
radiusAcctServerIndex INTEGER .1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.1 |
radiusAcctServerIpAddrIPv4 onlyrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.2 |
radiusAcctServerUdpPortrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.3 |
radiusAcctServerSharedSecretrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.4 |
radiusAcctServerIpAddressTypero InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.5 |
radiusAcctServerIpAddressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.6 |
tacacsServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.58 |
tacacsAuthServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.58.1 |
tacacsAuthServerModerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.58.1.1 |
tacacsAuthServerTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.58.1.2 |
tacacsAuthServerTable SEQUENCE OF TacacsAuthServerEntry .1.3.6.1.4.1.890.1.5.12.43.58.1.3 |
tacacsAuthServerEntryAn entry in tacacsAuthServerTable. TacacsAuthServerEntry .1.3.6.1.4.1.890.1.5.12.43.58.1.3.1 |
tacacsAuthServerIndex INTEGER .1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.1 |
tacacsAuthServerIpAddrIPv4 onlyrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.2 |
tacacsAuthServerTcpPortrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.3 |
tacacsAuthServerSharedSecretrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.4 |
tacacsAuthServerIpAddressTypero InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.5 |
tacacsAuthServerIpAddressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.6 |
tacacsAcctServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.58.2 |
tacacsAcctServerTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.58.2.1 |
tacacsAcctServerTable SEQUENCE OF TacacsAcctServerEntry .1.3.6.1.4.1.890.1.5.12.43.58.2.2 |
tacacsAcctServerEntryAn entry in tacacsAcctServerTable. TacacsAcctServerEntry .1.3.6.1.4.1.890.1.5.12.43.58.2.2.1 |
tacacsAcctServerIndex INTEGER .1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.1 |
tacacsAcctServerIpAddrIPv4 onlyrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.2 |
tacacsAcctServerTcpPortrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.3 |
tacacsAcctServerSharedSecretrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.4 |
tacacsAcctServerIpAddressTypero InetAddressType { ipv4(1), ipv6(2) } .1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.5 |
tacacsAcctServerIpAddressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.6 |
aaaSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.59 |
authenticationSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.59.1 |
authenticationTypeTable SEQUENCE OF AuthenticationTypeEntry .1.3.6.1.4.1.890.1.5.12.43.59.1.1 |
authenticationTypeEntryAn entry in authenticationTypeTable. AuthenticationTypeEntry .1.3.6.1.4.1.890.1.5.12.43.59.1.1.1 |
authenticationTypeNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.59.1.1.1.1 |
authenticationTypeMethodListEnable-local: 1, Login-local: 2, radius: 3, tacacs+: 4rw OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.59.1.1.1.2 |
accountingSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.59.2 |
accountingUpdatePeriodrw Integer32 .1.3.6.1.4.1.890.1.5.12.43.59.2.1 |
accountingTypeTable SEQUENCE OF AccountingTypeEntry .1.3.6.1.4.1.890.1.5.12.43.59.2.2 |
accountingTypeEntryAn entry in accountingTypeTable. AccountingTypeEntry .1.3.6.1.4.1.890.1.5.12.43.59.2.2.1 |
accountingTypeNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.1 |
accountingTypeActiverw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.2 |
accountingTypeBroadcastrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.3 |
accountingTypeModerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.4 |
accountingTypeMethodrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.5 |
accountingTypePrivilegerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.6 |
vdsl2Ext OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.60 |
xdsl2ExtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.60.0 |
xdsl2LinePerfLOFSThreshXtucThis notification indicates that the LOF seconds threshold
has been reached/exceeded for the referred xTU-C. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.12.43.60.0.1 |
xdsl2LinePerfLOFSThreshXturThis notification indicates that the LOF seconds threshold
has been reached/exceeded for the referred xTU-R. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.12.43.60.0.2 |
xdsl2LinePerfLPRSThreshXturThis notification indicates that the LPR seconds threshold
has been reached/exceeded for the referred xTU-R. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.12.43.60.0.3 |
xdsl2ExtLine OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.60.1 |
xdsl2ExtLineTableThe table xdsl2ExtLineTable extends xdsl2LineTable for ZyXEL product. SEQUENCE OF Xdsl2ExtLineEntry .1.3.6.1.4.1.890.1.5.12.43.60.1.1 |
xdsl2ExtLineEntryThe table xdsl2ExtLineTable contains extra functions besides those in
xdsl2LineTable. Xdsl2ExtLineEntry .1.3.6.1.4.1.890.1.5.12.43.60.1.1.1 |
xdsl2LineCmndConfSeltTrigger a SELT(Single End Loop Test) for the line. Note the loop
should be open.rw Xdsl2LineLdsf (VDSL2-LINE-TC-MIB) .1.3.6.1.4.1.890.1.5.12.43.60.1.1.1.1 |
xdsl2ExtLineBandTableThe table xdsl2ExtLineBandTable extends xdsl2LineBandTable for
ZyXEL product. SEQUENCE OF Xdsl2ExtLineBandEntry .1.3.6.1.4.1.890.1.5.12.43.60.1.2 |
xdsl2ExtLineBandEntryThe table xdsl2ExtLineBandTable contains extra per-band line
status parameters besides those in xdsl2LineBandTable. Xdsl2ExtLineBandEntry .1.3.6.1.4.1.890.1.5.12.43.60.1.2.1 |
xdsl2LineBandStatusActAtpActual Aggregate Transmit Power per band.
A value of 0x7FFFFFFF (2147483647) indicates the measurement is
out of range to be represented.ro Integer32 (-310..310 | 2147483647) UNITS "0.1 dBm" .1.3.6.1.4.1.890.1.5.12.43.60.1.2.1.1 |
xdsl2LineBandStatusActRxPwrActual Aggregate Receive Power per band.
A value of 0x7FFFFFFF (2147483647) indicates the measurement is
out of range to be represented.ro Integer32 (-255..255 | 2147483647) UNITS "0.1 dBm" .1.3.6.1.4.1.890.1.5.12.43.60.1.2.1.2 |
xdsl2ExtStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.60.2 |
xdsl2ExtLineSegmentTableThe table xdsl2ExtLineSegmentTable extends xdsl2LineSegmentTable for
ZyXEL product. SEQUENCE OF Xdsl2ExtLineSegmentEntry .1.3.6.1.4.1.890.1.5.12.43.60.2.1 |
xdsl2ExtLineSegmentEntryThe table xdsl2LineExtSegmentEntry contains extra line segment
status parameters besides those in xdsl2LineSegmentTable.
This table stores HLOG/QLN/SNR measured during initialization. Xdsl2ExtLineSegmentEntry .1.3.6.1.4.1.890.1.5.12.43.60.2.1.1 |
xdsl2LineSegmentLogThis parameter is applicable in initialization and use the same
format as xdsl2SCStatusSegmentLog.ro OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.1 |
xdsl2LineSegmentQlnThis parameter is applicable in initialization and use the same
format as xdsl2SCStatusSegmentQln.ro OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.2 |
xdsl2LineSegmentSnrThis parameter is applicable in initialization and use the same
format as xdsl2SCStatusSegmentSnr.ro OCTET STRING .1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.3 |
xdsl2LineSegmentStatusThis parameter indicates whether the Hlog/Qln/Snr data is ready.ro Bits .1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.4 |
xdsl2LineSegmentLogScGroupSizeNumber of subcarriers per group used to report the H(f)
logarithmic representation values for the respective
transmission direction. The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for VDSL2, it is
equal to the size of a subcarrier group used to compute these
parameters.ro Unsigned32(1 | 2 | 4 | 8) .1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.5 |
xdsl2LineSegmentQlnScGroupSizeNumber of subcarriers per group used to report the Quiet
Line Noise values for the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for VDSL2, it is
equal to the size of a subcarrier group used to compute these
parameters.ro Unsigned32(1 | 2 | 4 | 8) .1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.6 |
xdsl2LineSegmentSnrScGroupSizeNumber of subcarriers per group used to report the SNR values
on the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for VDSL2, it is
equal to the size of a subcarrier group used to compute these
parameters.ro Unsigned32(1 | 2 | 4 | 8) .1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.7 |
xdsl2ExtSCStatusTableThe table xdsl2ExtSCStatusTable extends xdsl2SCStatusTable for
ZyXEL product. SEQUENCE OF Xdsl2ExtSCStatusEntry .1.3.6.1.4.1.890.1.5.12.43.60.2.3 |
xdsl2ExtSCStatusEntryThe table xdsl2ExtSCStatusTable contains extra subcarrier
status parameters besides those in xdsl2LineSegmentTable. Xdsl2ExtSCStatusEntry .1.3.6.1.4.1.890.1.5.12.43.60.2.3.1 |
xdsl2SCStatusActAtpActual Aggregate Transmit Power Downstream.
The total amount of transmit power delivered by the xTU-C at
the U-C reference point, at the instant of measurement. It
ranges from -310 to 310 units of 0.1 dBm (Physical values are -31
to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement is
out of range to be represented.
This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once the DELT
process is over, the parameter no longer changes until the row is
deleted or a new DELT process is initiated.ro Integer32 (-310..310 | 2147483647) UNITS "0.1 dBm" .1.3.6.1.4.1.890.1.5.12.43.60.2.3.1.1 |
xdsl2ExtSCStatusBandTableThe table xdsl2ExtSCStatusBandTable extends xdsl2SCStatusBandTable for
ZyXEL product. SEQUENCE OF Xdsl2ExtSCStatusBandEntry .1.3.6.1.4.1.890.1.5.12.43.60.2.4 |
xdsl2ExtSCStatusBandEntryThe table xdsl2ExtSCStatusBandTable contains extra subcarrier
status parameters that are grouped per-band besides those in
xdsl2SCStatusBandTable. Xdsl2ExtSCStatusBandEntry .1.3.6.1.4.1.890.1.5.12.43.60.2.4.1 |
xdsl2SCStatusBandSnrMarginSNR Margin is the maximum increase in dB of the noise power
received at the xTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such that the
BER requirements are met for all bearer channels received at the
xTU. Values range from -640 to 630 in units of 0.1 dB (Physical
values are -64 to 63 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the SNR
Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the SNR
Margin measurement is currently unavailable.
This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once the DELT
process is over, the parameter no longer changes until the row is
deleted or a new DELT process is initiated.ro Integer32 (-640..630 | 2147483646 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.890.1.5.12.43.60.2.4.1.1 |
xdsl2ExtSeltStatusTableThe table xdsl2ExtSeltStatusTable contains SELT status. SEQUENCE OF Xdsl2ExtSeltStatusEntry .1.3.6.1.4.1.890.1.5.12.43.60.2.6 |
xdsl2ExtSeltStatusEntryThe table xdsl2ExtSeltStatusEntry contains SELT status. Xdsl2ExtSeltStatusEntry .1.3.6.1.4.1.890.1.5.12.43.60.2.6.1 |
xdsl2SeltStatusro Integer32 { idle(0), inProgress(1), failed(2), done(3) } .1.3.6.1.4.1.890.1.5.12.43.60.2.6.1.1 |
xdsl2SeltStatusLineTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.60.2.6.1.2 |
xdsl2SeltStatusLineLengthro Integer32 .1.3.6.1.4.1.890.1.5.12.43.60.2.6.1.3 |
xdsl2ExtSeltReflectionStatusTableThe table xdsl2ExtSeltReflectionStatusTable contains SELT status
for each reflection. SEQUENCE OF Xdsl2ExtSeltReflectionStatusEntry .1.3.6.1.4.1.890.1.5.12.43.60.2.7 |
xdsl2ExtSeltReflectionStatusEntryThe table xdsl2ExtSeltReflectionStatusTable contains SELT status
for each reflection. Xdsl2ExtSeltReflectionStatusEntry .1.3.6.1.4.1.890.1.5.12.43.60.2.7.1 |
xdsl2SeltReflection Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.1 |
xdsl2SeltDelayro Integer32 UNITS "0.1" .1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.2 |
xdsl2SeltErrorro Integer32 UNITS "0.1" .1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.3 |
xdsl2SeltAtn180kHzro Integer32 UNITS "0.1" .1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.4 |
xdsl2SeltAtn300kHzro Integer32 UNITS "0.1" .1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.5 |
xdsl2SeltFitErrorro Integer32 UNITS "0.1" .1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.6 |
xdsl2SeltFitTerminationro Integer32 UNITS "0.2" .1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.7 |
xdsl2ExtPM OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.60.4 |
xdsl2ExtPMLine OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.60.4.1 |
xdsl2ExtPMLineCurrTableThe table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable. SEQUENCE OF Xdsl2ExtPMLineCurrEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1 |
xdsl2ExtPMLineCurrEntryThe table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable. Xdsl2ExtPMLineCurrEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1 |
xdsl2PMLSinceLinkFecsCount of seconds since last link up that there was at
least one FEC correction event for one or more bearer channels in
this line. This parameter is inhibited during UAS or SES.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.1 |
xdsl2PMLSinceLinkEsCount of seconds since last link up that there was:
xTU-C: CRC-8 >= 1 for one or more bearer channels OR
LOS >= 1 OR SEF >=1 OR LPR >= 1
xTU-R: FEBE >= 1 for one or more bearer channels OR
LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 .
This parameter is inhibited during UAS.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.2 |
xdsl2PMLSinceLinkSesCount of seconds since last link up that that there was:
xTU-C: (CRC-8 anomalies in one or more of the
received bearer channels) >= 18 OR LOS >= 1
OR SEF >= 1 OR LPR >= 1
xTU-R: (FEBE anomalies in one or more of the
received bearer channels) >= 18 OR LOS-FE >= 1
OR RDI >= 1 OR LPR-FE >= 1 .
This parameter is inhibited during UAS.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.3 |
xdsl2PMLSinceLinkLossCount of seconds since last link up that there was LOS (or
LOS-FE for xTU-R).ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.4 |
xdsl2PMLSinceLinkUasCount of seconds in Unavailability State since last line up.
Unavailability begins at the onset of 10 contiguous
severely-errored seconds, and ends at the onset of 10 contiguous
seconds with no severely-errored seconds.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.5 |
xdsl2PMLSinceLinkLofsCount of seconds since last link up that there was LOF.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.6 |
xdsl2PMLSinceLinkLolCount of times the line loss of link since last link up.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.7 |
xdsl2PMLSinceLinkLolsCount of seconds since last link up that there
was Loss of Link .ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.8 |
xdsl2PMLSinceLinkLprCount of the line loss of power since last link up.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.9 |
xdsl2PMLSinceLinkLprsCount of seconds since last link up that there
was Loss of Power .ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.10 |
xdsl2PMLCurr15MLofsCount of seconds during this interval that there was LOF.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.11 |
xdsl2PMLCurr15MLolCount of times during this interval that the line Loss of Link.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.12 |
xdsl2PMLCurr15MLolsCount of seconds during this interval that there was Loss of Link.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.13 |
xdsl2PMLCurr15MLprCount of times during this interval that the line Loss of Power.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.14 |
xdsl2PMLCurr15MLprsCount of seconds during this interval that there was Loss of Power.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.15 |
xdsl2PMLCurr1DayLofsCount of seconds during this interval that there was LOF.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.16 |
xdsl2PMLCurr1DayLolCount of times during this interval that the line Loss of Link.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.17 |
xdsl2PMLCurr1DayLolsCount of seconds during this interval that there was Loss of Link.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.18 |
xdsl2PMLCurr1DayLprCount of times during this interval that the line Loss of Power.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.19 |
xdsl2PMLCurr1DayLprsCount of seconds during this interval that there was Loss of Power.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.20 |
xdsl2PMLSinceLinkInmEqInpThe INM Equivalent Inp histogram since last link up. An
array of 68 octets (each 4 octets means amount of a bin of
histogram), designed for supporting from 1 to 17 bins of
the histogram.
The particular index of the bin incremented by an impulse
noise event is equal to the computed value of equivalent INP,
except the 17th of anomaly INPEQ, which logs all equivalent
INPs greater than 16.
Each bin has a value in the range 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.21 |
xdsl2PMLSinceLinkInmIATThe INM Inter Arrival Time histogram since last link up.
An array of 32 octets (each 4 octets means amount of a bin
of histogram), designed for supporting from 0 to 7 bins of
the histogram.
The index of the particular bin incremented by an complete
impulse noise event is determained from the following
INMControl parameters.
Each bin has a value in the range 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.22 |
xdsl2PMLSinceLinkInmMEThe INM total measurement since last link up. This
indication occurs every time a data symbol is processed by
the Impulse Noise Sensor.
The range of the value is from 0x0 to 0xFFFFFFFFro Counter32 UNITS "symbols" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.23 |
xdsl2PMLCurr15MInmEqInpThe INM Equivalent Inp histogram during this 15min
interval. An array of 68 octets (each 4 octets means amount of
a bin of histogram), designed for supporting from 1 to 17 bins
of the histogram.
The particular index of the bin incremented by an impulse
noise event is equal to the computed value of equivalent INP,
except the 17th of anomaly INPEQ, which logs all equivalent
INPs greater than 16.
Each bin has a value in the range 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.24 |
xdsl2PMLCurr15MInmIATThe INM Inter Arrival Time histogram during this 15min
interval. An array of 32 octets (each 4 octets means amount of
a bin of histogram), designed for supporting from 0 to 7 bins
of the histogram.
The index of the particular bin incremented by an complete
impulse noise event is determained from the following
INMControl parameters.
Each bin has a value in the range 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.25 |
xdsl2PMLCurr15MInmMEThe INM total measurement during this 15min interval.
This indication occurs every time a data symbol is processed
by the Impulse Noise Sensor.
The range of the value is from 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.26 |
xdsl2PMLCurr1DayInmEqInpThe INM Equivalent Inp histogram during this 1Day interval.
An array of 68 octets (each 4 octets means amount of a bin of
histogram), designed for supporting from 1 to 17 bins of the
histogram.
The particular index of the bin incremented by an impulse
noise event is equal to the computed value of equivalent INP,
except the 17th of anomaly INPEQ, which logs all equivalent
INPs greater than 16.
Each bin has a value in the range 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.27 |
xdsl2PMLCurr1DayInmIATThe INM Inter Arrival Time histogram during this 1Day
interval. An array of 32 octets (each 4 octets means amount of
a bin of histogram), designed for supporting from 0 to 7 bins
of the histogram.
The index of the particular bin incremented by an complete
impulse noise event is determained from the following
INMControl parameters.
Each bin has a value in the range 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.28 |
xdsl2PMLCurr1DayInmMEThe INM total measurement during this 1Day interval.
This indication occurs every time a data symbol is processed
by the Impulse Noise Sensor.
The range of the value is from 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.29 |
xdsl2ExtPMLineHist15MinTableThe table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable. SEQUENCE OF Xdsl2ExtPMLineHist15MinEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.1.3 |
xdsl2ExtPMLineHist15MinEntryThe table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable. Xdsl2ExtPMLineHist15MinEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1 |
xdsl2PMLHist15MLofsCount of seconds during this interval that there was LOF.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.1 |
xdsl2PMLHist15MLolCount of times during this interval that the line Loss of Link.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.2 |
xdsl2PMLHist15MLolsCount of seconds during this interval that the line Loss of Link.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.3 |
xdsl2PMLHist15MLprCount of times during this interval that the line Loss of Power.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.4 |
xdsl2PMLHist15MLprsCount of seconds during this interval that the line Loss of Power.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.5 |
xdsl2PMLHist15MInmEqInpThe INM Equivalent Inp histogram during 15min interval.
An array of 68 octets (each 4 octets means amount of a bin of
histogram), designed for supporting from 1 to 17 bins of the
histogram.
The particular index of the bin incremented by an impulse
noise event is equal to the computed value of equivalent INP,
except the 17th of anomaly INPEQ, which logs all equivalent
INPs greater than 16.
Each bin has a value in the range 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.6 |
xdsl2PMLHist15MInmIATThe INM Inter Arrival Time histogram during 15min
interval. An array of 32 octets (each 4 octets means amount of
a bin of histogram), designed for supporting from 0 to 7 bins
of the histogram.
The index of the particular bin incremented by an complete
impulse noise event is determained from the following
INMControl parameters.
Each bin has a value in the range 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.7 |
xdsl2PMLHist15MInmMEThe INM total measurement during 15min interval.
This indication occurs every time a data symbol is processed
by the Impulse Noise Sensor.
The range of the value is from 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.8 |
xdsl2ExtPMLineHist1DayTableThe table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable. SEQUENCE OF Xdsl2ExtPMLineHist1DayEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.1.4 |
xdsl2ExtPMLineHist1DayEntryThe table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable. Xdsl2ExtPMLineHist1DayEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1 |
xdsl2PMLHist1DLofsCount of seconds during this interval that there was LOF.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.1 |
xdsl2PMLHist1DLolCount of times during this interval that the line Loss of Link.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.2 |
xdsl2PMLHist1DLolsCount of seconds during this interval that the line Loss of Link.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.3 |
xdsl2PMLHist1DLprCount of times during this interval that the line Loss of Power.ro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.4 |
xdsl2PMLHist1DLprsCount of seconds during this interval that the line Loss of Power.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.5 |
xdsl2PMLHist1DInmEqInpThe INM Equivalent Inp histogram during 1Day interval.
An array of 68 octets (each 4 octets means amount of a bin of
histogram), designed for supporting from 1 to 17 bins of the
histogram.
The particular index of the bin incremented by an impulse
noise event is equal to the computed value of equivalent INP,
except the 17th of anomaly INPEQ, which logs all equivalent
INPs greater than 16.
Each bin has a value in the range 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.6 |
xdsl2PMLHist1DInmIATThe INM Inter Arrival Time histogram during 1Day
interval. An array of 32 octets (each 4 octets means amount of
a bin of histogram), designed for supporting from 0 to 7 bins
of the histogram.
The index of the particular bin incremented by an complete
impulse noise event is determained from the following
INMControl parameters.
Each bin has a value in the range 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.7 |
xdsl2PMLHist1DInmMEThe INM total measurement during this 1Day interval.
This indication occurs every time a data symbol is processed
by the Impulse Noise Sensor.
The range of the value is from 0x0 to 0xFFFFFFFFro Counter32 .1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.8 |
xdsl2ExtPMChannel OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.60.4.2 |
xdsl2ExtPMChCurrTableThe table xdsl2PMChCurrTable extends xdsl2PMChCurrTable. SEQUENCE OF Xdsl2ExtPMChCurrEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.2.1 |
xdsl2ExtPMChCurrEntryThe table xdsl2PMChCurrTable extends xdsl2PMChCurrTable. Xdsl2ExtPMChCurrEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1 |
xdsl2PMChSinceLinkUncorrectedCWsCount of codewords that could not be corrected since last link up.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.1 |
xdsl2PMChCurr15MUncorrectedCWsCount of codewords that could not be corrected since during this interval.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.2 |
xdsl2PMChCurr1DayUncorrectedCWsCount of codewords that could not be corrected since during this interval.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.3 |
xdsl2PMChSinceLinkCodingViolationsCount of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel
since last link up.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.4 |
xdsl2PMChSinceLinkCorrectedBlocksCount of FEC (FFEC for xTU-R) anomalies (corrected code words)
occurring in the channel since last link up.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.5 |
xdsl2ExtPMChHist15MinTableThe table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable. SEQUENCE OF Xdsl2ExtPMChHist15MinEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.2.2 |
xdsl2ExtPMChHist15MinEntryThe table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable. Xdsl2ExtPMChHist15MinEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.2.2.1 |
xdsl2PMChHist15MUncorrectedCWsCount of codewords that could not be corrected since during this interval.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.4.2.2.1.1 |
xdsl2ExtPMChHist1DTableThe table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable. SEQUENCE OF Xdsl2ExtPMChHist1DEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.2.3 |
xdsl2ExtPMChHist1DEntryThe table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable. Xdsl2ExtPMChHist1DEntry .1.3.6.1.4.1.890.1.5.12.43.60.4.2.3.1 |
xdsl2PMChHist1DayUncorrectedCWsCount of codewords that could not be corrected since during this interval.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.4.2.3.1.1 |
xdsl2ExtProfile OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.60.5 |
xdsl2ExtProfileLine OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.60.5.1 |
xdsl2ExtLineConfTemplateTableThe table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable. SEQUENCE OF Xdsl2ExtLineConfTemplateEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.1.1 |
xdsl2ExtLineConfTemplateEntryTThe table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable. Xdsl2ExtLineConfTemplateEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.1.1.1 |
xdsl2LConfTempPortListA port list that indicates which ports this template applys for.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.60.5.1.1.1.1 |
xdsl2LConfTempInmConfProfileThe value of this object identifies the row in the
VDSL2/ADSL/ADSL2 and ADSL2+ INM configuration Profile Table,
(xdsl2ExtInmConfProfTable) that applies for this DSL line.rw SnmpAdminString .1.3.6.1.4.1.890.1.5.12.43.60.5.1.1.1.2 |
xdsl2ExtLineConfProfTableThe table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable. SEQUENCE OF Xdsl2ExtLineConfProfEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.1.2 |
xdsl2ExtLineConfProfEntryThe table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable. Xdsl2ExtLineConfProfEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1 |
xdsl2LConfProfBitSwapDsThis configuration parameter indicates if the use of bitswap is
disabled on downstream direction.
The possible values are:
disable(0),
enable(1)rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1.1 |
xdsl2LConfProfBitSwapUsThis configuration parameter indicates if the use of bitswap is
disabled on upstream direction.
The possible values are:
disable(0),
enable(1)rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1.2 |
xdsl2LConfProfPortListA port list that indicates which ports this profile applys for.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1.3 |
xdsl2MaxNumLineConfTemplateThe maximum number of VDSL line template.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.5 |
xdsl2MaxNumLineConfProfileThe maximum number of VDSL line profile.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.6 |
xdsl2ExtInmConfProfTablexdsl2ExtInmConfProfTable. SEQUENCE OF Xdsl2ExtInmConfProfEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7 |
xdsl2ExtInmConfProfEntryxdsl2ExtInmConfProfTable. Xdsl2ExtInmConfProfEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1 |
xdsl2ExtInmConfProfProfileNameThis object identifies a row in this table. SnmpAdminString .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.1 |
xdsl2ExtInmConfProfVtucInpEqThe INM Inmpulse Noise Protection Equivalent Mode.
Configuration parameter INM-INPEQ-MODE defines the way of
computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2
11.4.2.2.1
This takes a value in the range from 0 to 3.rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.2 |
xdsl2ExtInmConfProfVturInpEqThe INM Inmpulse Noise Protection Equivalent Mode.
Configuration parameter INM-INPEQ-MODE defines the way of
computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2
11.4.2.2.1
This takes a value in the range from 0 to 3.rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.3 |
xdsl2ExtInmConfProfVtucCCThe INM Cluster Continuation. The valid values for INMCC range
from 0 from 64 DMT symbols in steps of 1 DMT symbol.
Up to and including INMCC nondegraded symbols will be allowed before
a cluster is deemed to be complete and the impulse noise event over.rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.4 |
xdsl2ExtInmConfProfVturCCThe INM Cluster Continuation. The valid values for INMCC range
from 0 from 64 DMT symbols in steps of 1 DMT symbol.
Up to and including INMCC nondegraded symbols will be allowed before
a cluster is deemed to be complete and the impulse noise event over.rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.5 |
xdsl2ExtInmConfProfVtucIATOThe INM Inter Arrival Time Offset for the IAT anomaly generation.
The valid values for INMIATO range from 3 from 511 DMT symbols in steps
of 1 DMT symbol.rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.6 |
xdsl2ExtInmConfProfVturIATOThe INM Inter Arrival Time Offset for the IAT anomaly generation.
The valid values for INMIATO range from 3 from 511 DMT symbols in steps
of 1 DMT symbol.rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.7 |
xdsl2ExtInmConfProfVtucIATSThe INM Inter Arrival Time Step for the IAT anomaly generation.
The valid values for INMIATS range from 0 from 7 in steps. The range of
values of inter-arrival times recorded in a single bin is 2^(INMIATS).
All inter-arrival times greater than or equal to INMIATO+6*(2^INMIATS)
are recorded in the 7th bin of INMAIAT.rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.8 |
xdsl2ExtInmConfProfVturIATSThe INM Inter Arrival Time Step for the IAT anomaly generation.
The valid values for INMIATS range from 0 from 7 in steps. The range of
values of inter-arrival times recorded in a single bin is 2^(INMIATS).
All inter-arrival times greater than or equal to INMIATO+6*(2^INMIATS)
are recorded in the 7th bin of INMAIAT.rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.9 |
xdsl2ExtInmConfProfRowStatusThis object is used to create a new row or to modify or
delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.14 |
xdsl2ExtInmConfProfPortListA port list that indicates which ports this profile applys for.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.15 |
xdsl2MaxNumInmConfProfileThe maximum number of VDSL Inm profile.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.1.8 |
xdsl2ExtProfileChannel OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.60.5.2 |
xdsl2ExtChConfProfileTableThe table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable. SEQUENCE OF Xdsl2ExtChConfProfileEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.2.1 |
xdsl2ExtChConfProfileEntryThe table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable. Xdsl2ExtChConfProfileEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1 |
xdsl2ChConfProfPhyRDsThis configuration parameter defines phy retransmission
mode on downstream direction. If auto mode is selected,
PhyR will be disabled if the net data rate in PhyR mode
will be lower than in non-PhyR mode under current loop
condition and framing paramters.
The possible values are:
disable(0),
enable(1),
auto(2)rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1.1 |
xdsl2ChConfProfPhyRUsThis configuration parameter defines phy retransmission
mode on upstream direction. If auto mode is selected,
PhyR will be disabled if the net data rate in PhyR mode
will be lower than in non-PhyR mode under current loop
condition and framing paramters.
The possible values are:
disable(0),
enable(1),
auto(2)rw Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1.2 |
xdsl2ChConfProfPortListA port list that indicates which ports this profile applys for.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1.3 |
xdsl2MaxNumChConfProfileThe maximum number of VDSL channel profile.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.2.2 |
xdsl2ExtProfileAlarmConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.60.5.3 |
xdsl2ExtLineAlarmConfTemplateTableThe table xdsl2ExtLineAlarConfTemplateTable extends
xdsl2ExtLineAlarConfTemplateTable. SEQUENCE OF Xdsl2ExtLineAlarmConfTemplateEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.3.1 |
xdsl2ExtLineAlarmConfTemplateEntryThe table xdsl2ExtLineAlarConfTemplateTable extends
xdsl2ExtLineAlarConfTemplateTable. Xdsl2ExtLineAlarmConfTemplateEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.3.1.1 |
xdsl2LAlarmConfTempPortListA port list that indicates which ports this template applys for.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.60.5.3.1.1.3 |
xdsl2ExtLineAlarmConfProfileTableThe table xdsl2ExtLineAlarmConfProfileTable extends
xdsl2LineAlarmConfProfileTable. SEQUENCE OF Xdsl2ExtLineAlarmConfProfileEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.3.2 |
xdsl2ExtLineAlarmConfProfileEntryThe table xdsl2ExtLineAlarmConfProfileTable extends
xdsl2LineAlarmConfProfileTable. Xdsl2ExtLineAlarmConfProfileEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1 |
xdsl2LineAlarmConfProfileXtucThresh15MinLofsA threshold for the xdsl2PMLCurr15MLofs counter, when
xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.rw HCPerfIntervalThreshold UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.1 |
xdsl2LineAlarmConfProfileXturThresh15MinLofsA threshold for the xdsl2PMLCurr15MLofs counter, when
xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.rw HCPerfIntervalThreshold UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.2 |
xdsl2LAlarmConfProfilePortListA port list that indicates which ports this profile applys for.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.3 |
xdsl2LineAlarmConfProfileXturThresh15MinLprsA threshold for the xdsl2PMLCurr15MLprs counter, when
xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.rw HCPerfIntervalThreshold UNITS "seconds" .1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.4 |
xdsl2ExtChAlarmConfProfileTableThe table xdsl2ExtChAlarmConfProfileTable extends
xdsl2ExtChAlarmConfProfileTable. SEQUENCE OF Xdsl2ExtChAlarmConfProfileEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.3.3 |
xdsl2ExtChAlarmConfProfileEntryThe table xdsl2ExtChAlarmConfProfileTable extends
xdsl2ExtChAlarmConfProfileTable. Xdsl2ExtChAlarmConfProfileEntry .1.3.6.1.4.1.890.1.5.12.43.60.5.3.3.1 |
xdsl2ChAlarmConfProfilePortListA port list that indicates which ports this profileapplys for.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.60.5.3.3.1.3 |
xdsl2MaxNumLineAlarmConfTemplateThe maximum number of VDSL alarm template.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.3.4 |
xdsl2MaxNumLineAlarmConfProfileThe maximum number of VDSL line alarm profile.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.3.5 |
xdsl2MaxNumChAlarmConfProfileThe maximum number of VDSL channel alarm profile.ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.60.5.3.6 |
macBasedVlanSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.61 |
macBasedVlanTable SEQUENCE OF MacBasedVlanEntry .1.3.6.1.4.1.890.1.5.12.43.61.1 |
macBasedVlanEntryAn entry in macBasedVlanTable. MacBasedVlanEntry .1.3.6.1.4.1.890.1.5.12.43.61.1.1 |
macBasedVlanNameName of Mac-Based Vlan.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.61.1.1.1 |
macBasedVlanMACMac address for Mac-Based Vlanro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.61.1.1.2 |
macBasedVlanVlanIdVlan id for Mac-Based Vlan, 1~4094.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.61.1.1.3 |
macBasedVlan8021pPriority802.1p priority for Mac-Based Vlan, 0~7.rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.61.1.1.4 |
macBasedVlanRowstatusRow Status for Mac-Based Vlanrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.61.1.1.5 |
vlanProfileSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.62 |
vlanProfileTable SEQUENCE OF VlanProfileEntry .1.3.6.1.4.1.890.1.5.12.43.62.1 |
vlanProfileEntryAn entry in vlanProfileTable. VlanProfileEntry .1.3.6.1.4.1.890.1.5.12.43.62.1.1 |
vlanProfileNameName of vlan Profile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.62.1.1.1 |
vlanProfileMacLearningMac learning for vlan profilerw Enumeration .1.3.6.1.4.1.890.1.5.12.43.62.1.1.2 |
vlanProfileUnknownMulticastDropDrop unknown multicast packets.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.62.1.1.3 |
vlanProfileRowStatusRow status for vlan profilerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.62.1.1.4 |
vlanTable SEQUENCE OF VlanEntry .1.3.6.1.4.1.890.1.5.12.43.62.2 |
vlanEntryAn entry in vlanTable. VlanEntry .1.3.6.1.4.1.890.1.5.12.43.62.2.1 |
profileNameName of vlan Profile.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.62.2.1.1 |
dosPreventionSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.63 |
dosPreventionActiveDoS prevention enabled/disabled for the switch.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.63.1 |
dosPreventionMacCheckingChecking MAC enabled/disabled for the switch.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.63.4 |
dosPreventionIPCheckingChecking IP enabled/disabled for the switch.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.63.5 |
dosPreventionICMPFragmentDropping fragmented ICMP packets enabled/disabled for the switch.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.63.9 |
dosPreventionTCPSYNChecking TCP SYN packets enabled/disabled for the switch.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.63.11 |
dosPreventionTCPFragmentDropping fragmented TCP packets with offset value of 1 enabled/disabled for the switch.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.63.13 |
dosPreventionTCPControlSNDropping TCP packets with control flag of 0 and sequence number of 0 enabled/disabled for the switch.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.63.14 |
dosPreventionTCPPortChecking TCP port enabled/disabled for the switch.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.63.15 |
dosPreventionTCPSFChecking TCP packets with SYN and FIN bits enabled/disabled for the switch.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.63.16 |
dosPreventionTCPFUPChecking TCP packets with FIN, URG, PSH bits and sequence number enabled/disabled for the switch.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.63.17 |
dosPreventionUDPPortChecking UDP port enabled/disabled for the switch.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.63.18 |
ipv6Setup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.65 |
ipv6DefaultMgmtrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.65.2 |
inbandIpv6Setup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.65.3 |
inbandIpv6Vidrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.65.3.2 |
inbandIpv6StaticIprw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.890.1.5.12.43.65.3.3 |
inbandIpv6StaticSubnetMaskrw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.890.1.5.12.43.65.3.4 |
inbandIpv6StaticGatewayrw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.890.1.5.12.43.65.3.5 |
outOfBandIpv6Setup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.65.4 |
outOfBandIpv6Iprw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.890.1.5.12.43.65.4.1 |
outOfBandIpv6SubnetMaskrw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.890.1.5.12.43.65.4.2 |
outOfBandIpv6Gatewayrw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.890.1.5.12.43.65.4.3 |
l2ptSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.115 |
l2ptStateL2PT feature enabled/disabled for the switchrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.115.1 |
l2ptMacAddrL2PT destination mac addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.115.2 |
l2ptTable SEQUENCE OF L2ptEntry .1.3.6.1.4.1.890.1.5.12.43.115.3 |
l2ptEntryAn entry in l2ptTable. L2ptEntry .1.3.6.1.4.1.890.1.5.12.43.115.3.1 |
l2ptProtocolGroupL2PT protocols enabled/disabled on the portrw Bits .1.3.6.1.4.1.890.1.5.12.43.115.3.1.1 |
l2ptPointToPointProtocolGroupL2PT point-to-point protocols enabled/disabled on the portrw Bits .1.3.6.1.4.1.890.1.5.12.43.115.3.1.2 |
l2ptModeL2PT port role on the portrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.115.3.1.3 |
vlanMappingSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.116 |
vlanMappingStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.116.1 |
vlanMappingPortTable SEQUENCE OF VlanMappingPortEntry .1.3.6.1.4.1.890.1.5.12.43.116.2 |
vlanMappingPortEntryAn entry in vlanMappingPortTable. VlanMappingPortEntry .1.3.6.1.4.1.890.1.5.12.43.116.2.1 |
vlanMappingPortStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.116.2.1.1 |
vlanMappingPortDropMissrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.116.2.1.2 |
vlanMappingRuleTable SEQUENCE OF VlanMappingRuleEntry .1.3.6.1.4.1.890.1.5.12.43.116.3 |
vlanMappingRuleEntryAn entry in vlan-mapping rule table VlanMappingRuleEntry .1.3.6.1.4.1.890.1.5.12.43.116.3.1 |
vlanMappingRuleNameThe name of vlan-mapping entryrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.116.3.1.1 |
vlanMappingRulePortinterface port idro INTEGER .1.3.6.1.4.1.890.1.5.12.43.116.3.1.2 |
vlanMappingRuleVidinner vidro INTEGER .1.3.6.1.4.1.890.1.5.12.43.116.3.1.3 |
vlanMappingRuleTransVidtranslated vidrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.116.3.1.4 |
vlanMappingRulePrioritypriorityrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.116.3.1.5 |
vlanMappingRuleRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.116.3.1.6 |
vlanMappingRuleReplacePrioReplace Original Priorityrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.116.3.1.7 |
transceiverInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.117 |
transceiverSerialInfoTable SEQUENCE OF TransceiverSerialInfoEntry .1.3.6.1.4.1.890.1.5.12.43.117.1 |
transceiverSerialInfoEntryAn entry in transceiverSerialInfoTable. TransceiverSerialInfoEntry .1.3.6.1.4.1.890.1.5.12.43.117.1.1 |
transceiverSerialInfoEntryPortIndex of transceiverSerialInfo. It is referred to dot1dBasePortro INTEGER .1.3.6.1.4.1.890.1.5.12.43.117.1.1.1 |
transceiverSerialInfoEntryStatusTransceiver module status.ro Enumeration .1.3.6.1.4.1.890.1.5.12.43.117.1.1.2 |
transceiverSerialInfoEntryVendorTransceiver module vendor name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.117.1.1.3 |
transceiverSerialInfoEntryPartNoPart number provided by transceiver module vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.117.1.1.4 |
transceiverSerialInfoEntrySerialNoSerial number provided by transceiver module vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.117.1.1.5 |
transceiverSerialInfoEntryRevisionRevision level for part number provided by transceiver module vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.117.1.1.6 |
transceiverSerialInfoEntryDateCodeTransceiver module vendor's manufacturing date codero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.117.1.1.7 |
transceiverSerialInfoEntryTransceiverTransceiver module type namesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.117.1.1.8 |
transceiverDdmInfoTable SEQUENCE OF TransceiverDdmInfoEntry .1.3.6.1.4.1.890.1.5.12.43.117.2 |
transceiverDdmInfoEntryAn entry in transceiverDdmInfoTable. TransceiverDdmInfoEntry .1.3.6.1.4.1.890.1.5.12.43.117.2.1 |
transceiverDdmInfoEntryPortIndex of transceiverDdmInfo. This will be referred to dot1dBasePortro INTEGER .1.3.6.1.4.1.890.1.5.12.43.117.2.1.1 |
transceiverDdmInfoEntryTypeTransceiver module status.ro Enumeration .1.3.6.1.4.1.890.1.5.12.43.117.2.1.2 |
transceiverDdmInfoEntryAlarmMaxTransceiver module vendor name.ro INTEGER UNITS "0.01" .1.3.6.1.4.1.890.1.5.12.43.117.2.1.3 |
transceiverDdmInfoEntryAlarmMinPart number provided by transceiver module vendor.ro INTEGER UNITS "0.01" .1.3.6.1.4.1.890.1.5.12.43.117.2.1.4 |
transceiverDdmInfoEntryWarnMaxSerial number provided by transceiver module vendor.ro INTEGER UNITS "0.01" .1.3.6.1.4.1.890.1.5.12.43.117.2.1.5 |
transceiverDdmInfoEntryWarnMinRevision level for part number provided by transceiver module vendor.ro INTEGER UNITS "0.01" .1.3.6.1.4.1.890.1.5.12.43.117.2.1.6 |
transceiverDdmInfoEntryCurrentTransceiver module vendor's manufacturing date codero INTEGER UNITS "0.01" .1.3.6.1.4.1.890.1.5.12.43.117.2.1.7 |
transceiverDdmInfoEntryDescriptionTransceiver module type namesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.117.2.1.8 |
pppoeIASetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.119 |
globalPPPoEIA OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.119.1 |
globalPPPoEIAEnableTo enable the global PPPoE IA. Once the configuration is enabled, the
DSLAM will automatically generate the Agent Circuit ID field in PPPoE packet
for identifying access loop logical ports as: slot number,portnumber and VLAN ID.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.119.1.1 |
globalPPPoEIACircuitIDInfoEnableTo enable extra information to be appended into Agnet Circuit ID filed.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.119.1.2 |
globalPPPoEIACircuitIDInfoDatarw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.119.1.3 |
globalPPPoEIARemoteIDEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.119.1.4 |
globalPPPoEIARemoteIDDatarw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.119.1.5 |
globalPPPoEIARemoteIDType<1:port|2:system>rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.119.1.6 |
globalPPPoEIACircuitIDType<1:hostname|2:system>rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.119.1.7 |
pppoeIA OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.119.2 |
maxNumberOfPPPoEIAThe maximum number of PPPoE IA (by VLAN) entries that can be created.
A value of 0 for this object implies that there exists settings for
global PPPoE IA.ro INTEGER .1.3.6.1.4.1.890.1.5.12.43.119.2.1 |
pppoeIATable SEQUENCE OF PPPoEIAEntry .1.3.6.1.4.1.890.1.5.12.43.119.2.2 |
pppoeIAEntryAn entry in pppoeIATable. PPPoEIAEntry .1.3.6.1.4.1.890.1.5.12.43.119.2.2.1 |
pppoeIAVIDro INTEGER .1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.1 |
pppoeIACircuitIDInfoEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.2 |
pppoeIACircuitIDInfoDatarw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.3 |
pppoeIARemoteIDEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.4 |
pppoeIARemoteIDDatarw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.5 |
pppoeIARowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.6 |
pppoeIARemoteIDType<1:port | 2:system>rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.7 |
pppoeIACircuitIDType<1:hostname | 2:system>rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.8 |
iwfSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.120 |
pvcRuleTable SEQUENCE OF PvcRuleEntry .1.3.6.1.4.1.890.1.5.12.43.120.1 |
pvcRuleEntryAn entry in PVC rule table PvcRuleEntry .1.3.6.1.4.1.890.1.5.12.43.120.1.1 |
pvcRulePortinterface port idro INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.1.1.1 |
pvcRuleVpiVPIro INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.1.1.2 |
pvcRuleVciVCIro INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.1.1.3 |
pvcRulePvidPVIDrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.1.1.4 |
pvcRuleEncapATM encapulation methodrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.120.1.1.5 |
pvcRulePrioritypriorityrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.120.1.1.6 |
pvcRuleFCSFrame Check Sequence of PDU is preserved or not.rw Enumeration .1.3.6.1.4.1.890.1.5.12.43.120.1.1.7 |
pvcRuleMVlanMulticast VLAN pass through.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.120.1.1.8 |
pvcRuleRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.120.1.1.9 |
ippvcRuleTable SEQUENCE OF IpPvcRuleEntry .1.3.6.1.4.1.890.1.5.12.43.120.2 |
ippvcRuleEntryAn entry in IPPVC rule table IpPvcRuleEntry .1.3.6.1.4.1.890.1.5.12.43.120.2.1 |
ippvcRulePortinterface port idro INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.2.1.1 |
ippvcRuleVpiVPIro INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.2.1.2 |
ippvcRuleVciVCIro INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.2.1.3 |
ippvcRulePvidPVIDrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.2.1.4 |
ippvcRuleEncapATM encapulation methodrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.120.2.1.5 |
ippvcRulePrioritypriorityrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.120.2.1.6 |
ippvcRuleSubnetIpIP address of the subscriber intranetrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.120.2.1.7 |
ippvcRuleSubnetMasknetmask of the subscriber intranetrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.120.2.1.8 |
ippvcRuleDefaultRoutedefault route for outgoing trafficrw IpAddress .1.3.6.1.4.1.890.1.5.12.43.120.2.1.9 |
ippvcRuleRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.120.2.1.10 |
paepvcRuleTable SEQUENCE OF PaePvcRuleEntry .1.3.6.1.4.1.890.1.5.12.43.120.3 |
paepvcRuleEntryAn entry in PAEPVC rule table PaePvcRuleEntry .1.3.6.1.4.1.890.1.5.12.43.120.3.1 |
paepvcRulePortinterface port idro INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.3.1.1 |
paepvcRuleVpiVPIro INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.3.1.2 |
paepvcRuleVciVCIro INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.3.1.3 |
paepvcRulePvidPVIDrw INTEGER .1.3.6.1.4.1.890.1.5.12.43.120.3.1.4 |
paepvcRuleEncapATM encapulation methodrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.120.3.1.5 |
paepvcRulePrioritypriorityrw Enumeration .1.3.6.1.4.1.890.1.5.12.43.120.3.1.6 |
paepvcRuleRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.120.3.1.7 |
xdslBondingSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.121 |
xdslBondingConfigTable SEQUENCE OF XdslBondingConfigEntry .1.3.6.1.4.1.890.1.5.12.43.121.1 |
xdslBondingConfigEntryAn entry in xdslBondingConfigTable. XdslBondingConfigEntry .1.3.6.1.4.1.890.1.5.12.43.121.1.1 |
xdslBondingConfigNameName of Xdsl Bonding Group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.121.1.1.1 |
xdslBondingConfigMemberPortMember Ports of Bonding Grouprw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.121.1.1.2 |
xdslBondingConfigRowStatusRow status for vlan profilerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.43.121.1.1.3 |
xdslBondingStatusTable SEQUENCE OF XdslBondingStatusEntry .1.3.6.1.4.1.890.1.5.12.43.121.2 |
xdslBondingStatusEntryAn entry in xdslBondingStatusTable. XdslBondingStatusEntry .1.3.6.1.4.1.890.1.5.12.43.121.2.1 |
xdslBondingStatusActiveActive(1), Inactive(2)ro Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.121.2.1.1 |
xdslBondingStatusMemberPortMember Ports of Bonding Groupro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.121.2.1.2 |
xdslBondingStatusActivePortActive Ports of Bonding Groupro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.12.43.121.2.1.3 |
xdslBondingStatusMainPortMain Port of Bonding Group. 4294967295(0xffffffff) for Null Valuero Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.121.2.1.4 |
xdslBondingStatusFlagTypeFlag Type. 4294967295(0xffffffff) for Null Valuero Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.121.2.1.5 |
xdslBondingStatusRateUsUp-stream Group Rate. 4294967295(0xffffffff) for Null Valuero Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.121.2.1.6 |
xdslBondingStatusRateDsDown-stream Group Rate. 4294967295(0xffffffff) for Null Valuero Unsigned32 .1.3.6.1.4.1.890.1.5.12.43.121.2.1.7 |
macFlush OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.43.122 |
macFlushTable SEQUENCE OF MacFlushEntry .1.3.6.1.4.1.890.1.5.12.43.122.1 |
macFlushEntryAn entry in macFlushTable. MacFlushEntry .1.3.6.1.4.1.890.1.5.12.43.122.1.1 |
macFlushPortIndexro INTEGER .1.3.6.1.4.1.890.1.5.12.43.122.1.1.1 |
macFlushPortConfigSet 1 to execute mac flush operation in the specified port, read value will always return 0rw INTEGER .1.3.6.1.4.1.890.1.5.12.43.122.1.1.2 |