ZYXEL-VRRP-MIB
The subtree for Virtual Router Redundancy Protocol (VRRP)
Main OID:
zyxelVrrp.1.3.6.1.4.1.890.1.15.3.91
29
Objects
Active
Status
15
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
zyxelVrrpThe subtree for Virtual Router Redundancy Protocol (VRRP) MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.91 |
RFC1155-SMIThe subtree for Virtual Router Redundancy Protocol (VRRP) Unknown .1.3.6.1.4.1.890.1.15.3.91 |
IF-MIBThe subtree for Virtual Router Redundancy Protocol (VRRP) NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.91 |
zyxelVrrpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.91.1 |
zyVrrpMaxNumberOfVirtualRoutersThe maximum number of virtual routers that can be created.ro INTEGER .1.3.6.1.4.1.890.1.15.3.91.1.1 |
zyxelVrrpTableThe table contains VRRP configuration. SEQUENCE OF ZyxelVrrpEntry .1.3.6.1.4.1.890.1.15.3.91.1.2 |
zyxelVrrpEntryAn entry contains VRRP configuration. ZyxelVrrpEntry .1.3.6.1.4.1.890.1.15.3.91.1.2.1 |
zyVrrpVirtualIdEnter a virtual router number for which this VRRP entry is created.
You can configure up to seven virtual routers for one network. INTEGER .1.3.6.1.4.1.890.1.15.3.91.1.2.1.1 |
zyVrrpUplinkGatewayIP address of the uplink gateway in dotted decimal notation. IpAddress .1.3.6.1.4.1.890.1.15.3.91.1.2.1.2 |
zyVrrpPreemptStateEnable/Disable preempt moderw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.91.1.2.1.3 |
zyVrrpIntervalSpecify the number of seconds between hello message transmissions. The default is 1.rw INTEGER .1.3.6.1.4.1.890.1.15.3.91.1.2.1.4 |
zyVrrpPrioritySet the priority level. The number is bigger, the priority is higher.rw INTEGER .1.3.6.1.4.1.890.1.15.3.91.1.2.1.5 |
zyVrrpPrimaryVirtualpAddressThe IP address of the primary virtual router in dotted decimal notation.rw IpAddress .1.3.6.1.4.1.890.1.15.3.91.1.2.1.6 |
zyVrrpNameA descriptive name for identification purposesrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.91.1.2.1.7 |
zyVrrpSecondaryVirtualIpAddressThis is optional. The IP address of a secondary virtual router in dotted decimal notation.rw IpAddress .1.3.6.1.4.1.890.1.15.3.91.1.2.1.8 |
zyVrrpPingStateEnable/Disable virtual router to response ping.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.91.1.2.1.9 |
zyVrrpRowStatusThis object allows entries to be created and deleted from the VRRP table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.91.1.2.1.10 |
zyxelVrrpDomainTableThe table contains VRRP domain configuration. SEQUENCE OF ZyxelVrrpDomainEntry .1.3.6.1.4.1.890.1.15.3.91.1.3 |
zyxelVrrpDomainEntryAn entry contains VRRP domain configuration. ZyxelVrrpDomainEntry .1.3.6.1.4.1.890.1.15.3.91.1.3.1 |
zyVrrpDomainAuthenticationTypeSelect None to disable authentication. This is the default setting.
Select Simple to use a simple password to authenticate VRRP packet exchanges on this interfacerw Enumeration .1.3.6.1.4.1.890.1.15.3.91.1.3.1.1 |
zyVrrpDomainAuthenticationKeyWhen you select simple in the authentication field, enter a password key in this fieldrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.91.1.3.1.2 |
zyxelVrrpStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.91.2 |
zyxelVrrpInfoTableThe table contains VRRP information. SEQUENCE OF ZyxelVrrpInfoEntry .1.3.6.1.4.1.890.1.15.3.91.2.1 |
zyxelVrrpInfoEntryAn entry contains VRRP information. ZyxelVrrpInfoEntry .1.3.6.1.4.1.890.1.15.3.91.2.1.1 |
zyVrrpInfoIpAddressThe IP address of an IP routing domain that is associated to a virtual router. IpAddress .1.3.6.1.4.1.890.1.15.3.91.2.1.1.1 |
zyVrrpInfoIpMaskBitsThe subnet mask bits of an IP routing domain that is associated to a virtual router. INTEGER .1.3.6.1.4.1.890.1.15.3.91.2.1.1.2 |
zyVrrpInfoVirtualIdDisplay the ID number of the virtual router. INTEGER .1.3.6.1.4.1.890.1.15.3.91.2.1.1.3 |
zyVrrpInfoVirtualRouterStatusDisplay the status of the virtual router.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.91.2.1.1.4 |
zyVrrpInfoUplinkStatusDisplay the status of the link between this switch and the uplink gateway.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.91.2.1.1.5 |