ZYXEL-VLAN-STACK-MIB
AI MIB Summary
The ZYXEL-VLAN-STACK-MIB enables monitoring and configuration of VLAN stacking (Q-in-Q) parameters, including 802.1ad encapsulation, VLAN ID mappings, and port-based stacking states on ZyXEL network switches.
The subtree for VLAN Stack
Main OID:
zyxelVlanStack.1.3.6.1.4.1.890.1.15.3.89
20
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
zyxelVlanStackThe subtree for VLAN Stack MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.89 |
RFC1155-SMIThe subtree for VLAN Stack Unknown .1.3.6.1.4.1.890.1.15.3.89 |
IF-MIBThe subtree for VLAN Stack NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.89 |
zyxelVlanStackSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.89.1 |
zyVlanStackStateEnable/Disable VLAN Stacking for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.89.1.1 |
zyxelVlanStackPortTableThe table contains VLAN stack configuration. SEQUENCE OF ZyxelVlanStackPortEntry .1.3.6.1.4.1.890.1.15.3.89.1.2 |
zyxelVlanStackPortEntryAn entry contains VLAN stack configuration. ZyxelVlanStackPortEntry .1.3.6.1.4.1.890.1.15.3.89.1.2.1 |
zyVlanStackPortModeVLAN stacking mode of the port:
Set Normal mode to have the switch ignore frames received(or transmitted) on this port with VLAN stacking tags.
Set Access mode to have the switch add the SP TPID tag to all incoming frames received on this port. It is for ingress ports at the edge of the service provider's network.
Set Tunnel mode (available for Gigabit ports only) for egress ports at the edge of the service provider's network.
In order to support VLAN stacking on a port, the port must be able to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag) to pass through it.rw Enumeration .1.3.6.1.4.1.890.1.15.3.89.1.2.1.1 |
zyVlanStackPortVidStacking port VLAN ID is the service provider's VLAN ID (the outer VLAN tag).
Set the service provider ID (from 1 to 4094) for frames received on this port.rw INTEGER .1.3.6.1.4.1.890.1.15.3.89.1.2.1.2 |
zyVlanStackPortPrioritySet a priority level (from 0 to 7). This is the service provider's priority level that adds to the frames received on this port.
0 is the lowest priority level and 7 is the highest.rw Enumeration .1.3.6.1.4.1.890.1.15.3.89.1.2.1.3 |
zyVlanStackTunnelPortTpidTPID is a standard Ethernet type code identifying the frame and indicates whether the frame carries IEEE 802.1Q tag information.
Set a four-digit hexadecimal number from 0000 to FFFF that the switch adds in the outer VLAN tag of the frames sent on the tunnel port(s).
The switch also uses this to check if the received frames are double-tagged. The value of this field is 0x8100 as defined in IEEE 802.1Q.
If the switch needs to communicate with other vendors' devices, they should use the same TPID.rw INTEGER .1.3.6.1.4.1.890.1.15.3.89.1.2.1.4 |
zySelectiveQinQMaxNumberOfRulesThe maximum number of selective Q-in-Q that can be created.ro INTEGER .1.3.6.1.4.1.890.1.15.3.89.1.3 |
zyxelSelectiveQinQTableThe table contains selective Q-in-Q configuration. SEQUENCE OF ZyxelSelectiveQinQEntry .1.3.6.1.4.1.890.1.15.3.89.1.4 |
zyxelSelectiveQinQEntryAn entry contains selective Q-in-Q configuration. ZyxelSelectiveQinQEntry .1.3.6.1.4.1.890.1.15.3.89.1.4.1 |
zySelectiveQinQNameSet the name of selective Q-in-Q entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.89.1.4.1.1 |
zySelectiveQinQPortInterface port ID. INTEGER .1.3.6.1.4.1.890.1.15.3.89.1.4.1.2 |
zySelectiveQinQCvidThe customer VLAN ID (the inner VLAN tag) from 1 to 4094.
This is the VLAN tag carried in the packets from the subscribers. INTEGER .1.3.6.1.4.1.890.1.15.3.89.1.4.1.3 |
zySelectiveQinQSpvidStacking port VLAN ID is the service provider's VLAN ID (the outer VLAN tag).
Set the service provider ID (from 1 to 4094) for frames received on this port.rw INTEGER .1.3.6.1.4.1.890.1.15.3.89.1.4.1.4 |
zySelectiveQinQPrioritySet a priority level (from 0 to 7). This is the service provider's priority level that adds to the frames received on this port.
0 is the lowest priority level and 7 is the highest.rw Enumeration .1.3.6.1.4.1.890.1.15.3.89.1.4.1.5 |
zySelectiveQinQRowStatusThis object allows entries to be created and deleted from the selective Q-in-Q tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.89.1.4.1.6 |