ZYXEL-TRTCM-MIB
The subtree for Two Rate Three Color Marker (trTCM)
Main OID:
zyxelTrtcm.1.3.6.1.4.1.890.1.15.3.85
20
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
zyxelTrtcmThe subtree for Two Rate Three Color Marker (trTCM) MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.85 |
RFC1155-SMIThe subtree for Two Rate Three Color Marker (trTCM) Unknown .1.3.6.1.4.1.890.1.15.3.85 |
IF-MIBThe subtree for Two Rate Three Color Marker (trTCM) NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.85 |
zyxelTrtcmSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.85.1 |
zyTctcmStateEnable/Disable TRTCM (Two-rate three color marker) on the switch. The switch evaluates and marks the packets based on the TRTCM settings.
Note: You must also enable DiffServ on the switch and the individual ports for the switch to drop red (high loss priority) colored packets.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.85.1.1 |
zyTrtcmModeEnter color-blind to have the switch treat all incoming packets as uncolored.
All incoming packets are evaluated against the CIR and PIR. Enter color-aware to treat the
packets as marked by some preceding entity. Incoming packets are evaluated based on their
existing color. Incoming packets that are not marked proceed through the switch.rw Enumeration .1.3.6.1.4.1.890.1.15.3.85.1.2 |
zyxelTrtcmPortTableThe table contains TRTCM port configuration. SEQUENCE OF ZyxelTrtcmPortEntry .1.3.6.1.4.1.890.1.15.3.85.1.3 |
zyxelTrtcmPortEntryAn entry contains TRTCM port configuration. ZyxelTrtcmPortEntry .1.3.6.1.4.1.890.1.15.3.85.1.3.1 |
zyTrtcmPortStateEnable/Disable TRTCM on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.85.1.3.1.1 |
zyTrtcmPortCirSpecify the Commit Information Rate (CIR) for this port.rw INTEGER .1.3.6.1.4.1.890.1.15.3.85.1.3.1.2 |
zyTrtcmPortPirSpecify the Peak Information Rate (PIR) for this port.rw INTEGER .1.3.6.1.4.1.890.1.15.3.85.1.3.1.3 |
zyTrtcmPortDscpProfileThe name of trtcm dscp profile with specifed CIR and PIR setting on the port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.85.1.3.1.4 |
zyTrtcmMaxNumberOfDscpProfilesThe maximum number of TRTCM DSCP profile that can be created.ro INTEGER .1.3.6.1.4.1.890.1.15.3.85.1.4 |
zyxelTrtcmDscpProfileTableAThe talbe contains TRTCM profile configuration. SEQUENCE OF ZyxelTrtcmDscpProfileEntry .1.3.6.1.4.1.890.1.15.3.85.1.5 |
zyxelTrtcmDscpProfileEntryAn entry contains TRTCM profile configuration. ZyxelTrtcmDscpProfileEntry .1.3.6.1.4.1.890.1.15.3.85.1.5.1 |
zyTrtcmDscpProfileNameThe name of TRTCM DSCP profile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.85.1.5.1.1 |
zyTrtcmDscpProfileDscpGreenSpecify the DSCP Green value to use for packets with low packet loss priority.rw INTEGER .1.3.6.1.4.1.890.1.15.3.85.1.5.1.2 |
zyTrtcmDscpProfileDscpYellowSpecify the DSCP Yellow value to use for packets with medium packet loss priority.rw INTEGER .1.3.6.1.4.1.890.1.15.3.85.1.5.1.3 |
zyTrtcmDscpProfileDscpRedSpecify the DSCP red value to use for packets with high packet loss priority.rw INTEGER .1.3.6.1.4.1.890.1.15.3.85.1.5.1.4 |
zyTrtcmDscpProfileRowstatusThis object allows to create and delete a TRTCM DSCP profile entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.85.1.5.1.5 |