Object Name	Syntax	OID
zyxelStormControlThe subtree for storm control MODULE-IDENTITY `.1.3.6.1.4.1.890.1.15.3.78`	MODULE-IDENTITY	`.1.3.6.1.4.1.890.1.15.3.78`
RFC1155-SMIThe subtree for storm control Unknown `.1.3.6.1.4.1.890.1.15.3.78`	Unknown	`.1.3.6.1.4.1.890.1.15.3.78`
IF-MIBThe subtree for storm control NOTIFICATION-TYPE `.1.3.6.1.4.1.890.1.15.3.78`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.890.1.15.3.78`
zyxelStormControlSetup OBJECT IDENTIFIER `.1.3.6.1.4.1.890.1.15.3.78.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.890.1.15.3.78.1`
zyStromControlStateEnabled/Disabled traffic storm control on the switch.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.78.1.1`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.78.1.1`
zyxelStromControlPortTableThe table cantains storm control port configuration. SEQUENCE OF ZyxelStromControlPortEntry `.1.3.6.1.4.1.890.1.15.3.78.1.2`	SEQUENCE OF ZyxelStromControlPortEntry	`.1.3.6.1.4.1.890.1.15.3.78.1.2`
zyxelStromControlPortEntryA entry cantains storm control port configuration. ZyxelStromControlPortEntry `.1.3.6.1.4.1.890.1.15.3.78.1.2.1`	ZyxelStromControlPortEntry	`.1.3.6.1.4.1.890.1.15.3.78.1.2.1`
zyStromControlPortBroadcastStateEnabled/Disabled broadcast rate limit on the indicated port.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.78.1.2.1.1`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.78.1.2.1.1`
zyStromControlPortBroadcastRateAllowed broadcast rate in pkts/s. For FE port, the maximum value is 148800 pkts/s. For GE port, the maximum value is 262143 pkts/s.rw INTEGER `.1.3.6.1.4.1.890.1.15.3.78.1.2.1.2`	INTEGER	`.1.3.6.1.4.1.890.1.15.3.78.1.2.1.2`
zyStromControlPortMulticastStateEnabled/Disabled multicast rate limit on the indicated port.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.78.1.2.1.3`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.78.1.2.1.3`
zyStromControlPortMulticastRateAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800 pkts/s. For GE port, the maximum value is 262143 pkts/s.rw INTEGER `.1.3.6.1.4.1.890.1.15.3.78.1.2.1.4`	INTEGER	`.1.3.6.1.4.1.890.1.15.3.78.1.2.1.4`
zyStromControlPortDlfStateEnabled/Disabled destination lookup failure frames rate limit on the indicated port.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.78.1.2.1.5`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.78.1.2.1.5`
zyStromControlPortDlfRateAllowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800 pkts/s. For GE port, the maximum value is 262143 pkts/s.rw INTEGER `.1.3.6.1.4.1.890.1.15.3.78.1.2.1.6`	INTEGER	`.1.3.6.1.4.1.890.1.15.3.78.1.2.1.6`

More MIBs from ZyXEL

Browse all ZyXELMIBs →

ZYXEL-IES5000-MIB

SNMP MIB module

3448 objects→

IES5206-MIB

The IES5206-MIB provides vendor-specific SNMP management capabilities for the IES5206, IES5212, and IES6217 industrial Ethernet switches, exposing proprietary objects for monitoring device health, interface statistics, and system configuration parameters. This private MIB extension enables granular visibility into hardware status, port-level metrics, and operational states specific to these Allied Telesis industrial networking platforms.

2259 objects→

ZYXEL-ves1724-56-MIB

SNMP MIB module

1842 objects→

ZYXEL-ves1608FE57-MIB

SNMP MIB module

1357 objects→

ZYXEL-XGS4700-48F-MIB

SNMP MIB module

1136 objects→

ZYXEL-MGS370012C-MIB

SNMP MIB module

1095 objects→