ZYXEL-SFLOW-MIB
The subtree for sFlow
Main OID:
zyxelSflow.1.3.6.1.4.1.890.1.15.3.75
23
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
zyxelSflowThe subtree for sFlow MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.75 |
RFC1155-SMIThe subtree for sFlow Unknown .1.3.6.1.4.1.890.1.15.3.75 |
IF-MIBThe subtree for sFlow NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.75 |
zyxelSflowSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.75.1 |
zySflowStateEnable/Disable sflow on the switch.
sFlow (RFC 3176) is a standard technology for monitoring switched networks. An sFlow agent embedded on
a switch or router gets sample data and packet statistics from traffic forwarded through its ports. The
sFlow agent then creates sFlow data and sends it to an sFlow collector. The sFlow collector is a server
that collects and analyzes sFlow datagram. An sFlow datagram includes packet header, input and output
interface, sampling process parameters and forwarding information.
sFlow minimizes impact on CPU load of the switch as it analyzes sample data only. sFlow can continuously
monitor network traffic and create reports for network performance analysis and troubleshooting. For
example, you can use it to know which IP address or which type of traffic caused network congestion.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.75.1.1 |
zySflowMaxNumberOfCollectorsThe maximum number of sFlow collectors entries that can be created.ro INTEGER .1.3.6.1.4.1.890.1.15.3.75.1.2 |
zyxelSflowCollectorTableThe table contains sFlow collector configuration. SEQUENCE OF ZyxelSflowCollectorEntry .1.3.6.1.4.1.890.1.15.3.75.1.3 |
zyxelSflowCollectorEntryAn entry contains sFlow collector configuration. ZyxelSflowCollectorEntry .1.3.6.1.4.1.890.1.15.3.75.1.3.1 |
zySflowCollectorIpAddressTypeThe Type of IP address for sflow collector entry. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.15.3.75.1.3.1.1 |
zySflowCollectorIpAddressThe IP address of the sFlow collector. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.15.3.75.1.3.1.2 |
zySflowCollectorUdpPortEnter a UDP port number the Switch uses to send sFlow datagram to the collector.
If you change the port here, make sure you change it on the collector, too.
The default port is 6343.rw INTEGER .1.3.6.1.4.1.890.1.15.3.75.1.3.1.3 |
zySflowCollectorRowStatusThis object allow entry to be create and deleted a sFlow collector entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.75.1.3.1.4 |
zyxelSflowPortTableThe table contains sFlow port configuration. SEQUENCE OF ZyxelSflowPortEntry .1.3.6.1.4.1.890.1.15.3.75.1.4 |
zyxelSflowPortEntryAn entry contains sFlow port configuration. ZyxelSflowPortEntry .1.3.6.1.4.1.890.1.15.3.75.1.4.1 |
zySflowPortStateEnable/Disable sflow on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.75.1.4.1.1 |
zySflowMaxNumberOfPortCollectorsThe maximum number of sFlow port collectors entries that can be created.ro INTEGER .1.3.6.1.4.1.890.1.15.3.75.1.5 |
zyxelSflowPortCollectorTableThe table contains sFlow port collector configuration. SEQUENCE OF ZyxelSflowPortCollectorEntry .1.3.6.1.4.1.890.1.15.3.75.1.6 |
zyxelSflowPortCollectorEntryAn entry contains sFlow port collector configuration. ZyxelSflowPortCollectorEntry .1.3.6.1.4.1.890.1.15.3.75.1.6.1 |
zySflowPortCollectorIpAddressTypeThe Type of IP address for sflow port collector entry. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.15.3.75.1.6.1.1 |
zySflowPortCollectorIpAddressThe IP address of the sFlow port collector. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.15.3.75.1.6.1.2 |
zySflowPortCollectorSampleRateEnter a number (N) from 256 to 65535.
The switch captures every one out of N packets for this port and creates sFlow datagram.rw INTEGER .1.3.6.1.4.1.890.1.15.3.75.1.6.1.3 |
zySflowPortCollectorPollIntervalSpecify a time interval (from 20 to 120 in seconds) the switch waits before sending the sFlow datagram and packet counters for this port to the collector.rw INTEGER .1.3.6.1.4.1.890.1.15.3.75.1.6.1.4 |
zySflowPortCollectorRowStatusThis object allows a sFlow port collector entry to be created and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.75.1.6.1.5 |