ZYXEL-SAM1216
AI MIB Summary
Standard SNMP MIB module defining data structures for ZYXEL-SAM1216.
454
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
454 total| Object Name |
|---|
zyxel OBJECT IDENTIFIER .1.3.6.1.4.1.890 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.890.1 |
accessSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5 |
sesSeries OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5 |
sam1216-22 OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6 |
alarmconf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.2 |
alarmOpsThe manager sets the corresponding bit value to 1 to start the operation
and the agent clears the object to zero when the operation is successfully completed.
The various bit positions are:
BIT 1: clear
BIT 2: cutoffrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.1 |
alarmConfTableThis table includes alarm configuration. SEQUENCE OF AlarmConfEntry .1.3.6.1.4.1.890.1.5.5.6.2.2 |
alarmConfEntryAn entry in alarmConfTable. AlarmConfEntry .1.3.6.1.4.1.890.1.5.5.6.2.2.1 |
alarmConfId5000: linkUp
5001: linkDown
5002: shdslLoopAttenCrossing
5003: shdslSNRMarginCrossing
5004: shdslPerfESThresh
5005: shdslPerfSESThresh
5006: shdslPerfCRCAnomaliesThresh
5007: shdslPerfLOSWSThresh
5008: shdslPerfUASThresh
10000: eqptVoltageError
10001: eqptTempError
10002: eqptHwRTCError
10003: eqptHWMonitorFailed
10004: coldStart
10005: warmStart
15000: sysReboot
15001: sysAlarmCutoffEnabled
15002: sysAlarmClearEnabled
15003: sysLoginFailed
15004: sysMacAntiSpoofing
20000: enetlinkUp
20001: enetlinkDownro INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.2.1.1 |
alarmConfFacilityAlarm facility.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.2.2.1.2 |
alarmConfTargetThe destination which alarms are reported to. Set the bit to 1 to enable the target.
BIT 1: snmp trap
BIT 2: syslogrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.2.1.3 |
alarmConfSeverityAlarm severityrw Enumeration .1.3.6.1.4.1.890.1.5.5.6.2.2.1.4 |
alarmConfClearableSetting the object to one indicates that the alarm is to be cleared when user submits alarm clear.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.2.2.1.5 |
alarmCurrTableThis table includes current alarm information. SEQUENCE OF AlarmCurrEntry .1.3.6.1.4.1.890.1.5.5.6.2.3 |
alarmCurrEntryAn entry in alarmCurrTable. AlarmCurrEntry .1.3.6.1.4.1.890.1.5.5.6.2.3.1 |
alarmCurrIndexIndex of the alarm.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.3.1.1 |
alarmCurrOccurTimeAlarm occurence time (in hundredths of a second) since the system was last re-initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.890.1.5.5.6.2.3.1.2 |
alarmCurrTrapOidTrap OID of the alarm.ro OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.2.3.1.3 |
alarmCurrParam1The 1st parameter of the alarm.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.3.1.4 |
alarmCurrParam2The 2nd parameter of the alarm.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.3.1.5 |
alarmCurrParam3The 3rd parameter of the alarm.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.3.1.6 |
alarmCurrParam4The 4th parameter of the alarm.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.3.1.7 |
alarmCurrParam5The 5th parameter of the alarm.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.3.1.8 |
alarmCurrParam6The 6th parameter of the alarm.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.3.1.9 |
alarmCurrParam7The 7th parameter of the alarm.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.3.1.10 |
alarmCurrParam8The 8th parameter of the alarm.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.2.3.1.11 |
alarmCurrTimeDescrThe string representation of occurence time (YYYY/MM/DD HH:MM:SS).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.2.3.1.12 |
alarmCurrSeverityThe severity of the alarm.ro Enumeration .1.3.6.1.4.1.890.1.5.5.6.2.3.1.13 |
alarmCurrDescrThe description of the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.2.3.1.14 |
alarmSeverityPortTableThis table includes the configuration of alarm reporting severity threshold for each port. SEQUENCE OF AlarmSeverityPortEntry .1.3.6.1.4.1.890.1.5.5.6.2.4 |
alarmSeverityPortEntryAn entry in alarmSeverityPortTable. AlarmSeverityPortEntry .1.3.6.1.4.1.890.1.5.5.6.2.4.1 |
severityThreshThe minimum alarm severity that is reported.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.2.4.1.1 |
multicast OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.7 |
igmpEnableEnable/disable IGMP protocol.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.7.1 |
mcastBandwidth OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.7.4 |
mcastDefaultBandwidthDefault bandwidth requirement for a multicast channel.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.7.4.1 |
maxNumOfMcastBwThe maximum number of row entries that user can create in mcastBwTable.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.7.4.2 |
mcastBwTableThis table defines bandwidth budget for a range of multicast IP channels. SEQUENCE OF McastBwEntry .1.3.6.1.4.1.890.1.5.5.6.7.4.3 |
mcastBwEntryAn entry of mcastBwTable. McastBwEntry .1.3.6.1.4.1.890.1.5.5.6.7.4.3.1 |
mcastBwIndexThe index which specify the entry.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.1 |
mcastBwStartIpThe start multicast IP of the bandwidth control range.rw IpAddress .1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.2 |
mcastBwEndIpThe end multicast IP of the bandwidth control range.rw IpAddress .1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.3 |
mcastBwBandwidthThe bandwidth budget for the multicast IP channels.rw INTEGER UNITS "Kbps" .1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.4 |
mcastBwRowStatusThe row status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.5 |
mcastBwPortTableThis table specify the multicast bandwidth control of the port. SEQUENCE OF McastBwPortEntry .1.3.6.1.4.1.890.1.5.5.6.7.4.4 |
mcastBwPortEntryAn entry of mcastBwPortTable. McastBwPortEntry .1.3.6.1.4.1.890.1.5.5.6.7.4.4.1 |
mcastBwPortEnableEnable/disable multicast bandwidth control for a port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.7.4.4.1.1 |
mcastBwPortBandwidthSet bandwidth threshold for a port.rw INTEGER UNITS "Kbps" .1.3.6.1.4.1.890.1.5.5.6.7.4.4.1.2 |
igmpCount OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.7.5 |
igmpCountPortTableThis table specify the IGMP count limiting of the port. SEQUENCE OF IgmpCountPortEntry .1.3.6.1.4.1.890.1.5.5.6.7.5.1 |
igmpCountPortEntryAn entry of igmpCountPortTable. IgmpCountPortEntry .1.3.6.1.4.1.890.1.5.5.6.7.5.1.1 |
igmpCountPortEnableEnable/disable IGMP count limiting for a port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.7.5.1.1.1 |
igmpCountPortLimitThe maximum allowed IGMP report count for a port.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.7.5.1.1.2 |
mvlan OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.7.6 |
maxNumOfMvlanThe maximum number of row entries that user can create in mvlanTable.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.7.6.1 |
mvlanTableA table containing static configuration information for
each multicast VLAN configured into the device. SEQUENCE OF MvlanEntry .1.3.6.1.4.1.890.1.5.5.6.7.6.2 |
mvlanEntryAn entry of mvlanTable. MvlanEntry .1.3.6.1.4.1.890.1.5.5.6.7.6.2.1 |
mvlanIndexThe VLAN-ID refering to this VLAN.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.1 |
mvlanNameAn administratively assigned string, which may be used to identify the VLAN.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.2 |
mvlanEgressPortsThe set of ports which are permanently assigned to the
egress list for this multicast VLAN.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.3 |
mvlanUntaggedPortsThe set of ports which should transmit egress packets
for this multicast VLAN as untagged.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.4 |
mvlanRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.5 |
mvlanTranslateTableA table that contains multicast to VLAN translation. SEQUENCE OF MvlanTranslateEntry .1.3.6.1.4.1.890.1.5.5.6.7.6.3 |
mvlanTranslateEntryAn entry of mvlanTranslateTable. MvlanTranslateEntry .1.3.6.1.4.1.890.1.5.5.6.7.6.3.1 |
mvlanTranslateIndexThe index which specif the entry.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.1 |
mvlanTranslateStartIpThe start IP of the multicast VLAN translation.rw IpAddress .1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.2 |
mvlanTranslateEndIpThe end IP of the multicast VLAN translation.rw IpAddress .1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.3 |
queryVid OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.7.7 |
igmpVersionSetting IGMP version.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.7.7 |
maxNumOfQryVidThe maximum number of row entries that user can create in qryVidConfTable.
This object is supported by R1.02 and later versions.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.7.7.1 |
qryVidConfTableThis table defines statically set VLANs used for response IGMP report.
This table is supported by R1.02 and later versions. SEQUENCE OF QryVidConfEntry .1.3.6.1.4.1.890.1.5.5.6.7.7.2 |
qryVidConfEntryAn entry in qryVidConfTable. QryVidConfEntry .1.3.6.1.4.1.890.1.5.5.6.7.7.2.1 |
qryVidVLAN ID.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.7.7.2.1.1 |
qryVidRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.7.7.2.1.2 |
qryVidStatusTableThis table shows statically set or dynamically learned VLANs used for response IGMP report. SEQUENCE OF QryVidStatusEntry .1.3.6.1.4.1.890.1.5.5.6.7.7.3 |
qryVidStatusEntryAn entry in qryVidStatusTable. QryVidStatusEntry .1.3.6.1.4.1.890.1.5.5.6.7.7.3.1 |
qryVidTypeVLAN type.ro Enumeration .1.3.6.1.4.1.890.1.5.5.6.7.7.3.1.1 |
port OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.8 |
subrPortTableThis table includes subscriber attributes for the port. SEQUENCE OF SubrPortEntry .1.3.6.1.4.1.890.1.5.5.6.8.1 |
subrPortEntryAn entry in subrPortTable. SubrPortEntry .1.3.6.1.4.1.890.1.5.5.6.8.1.1 |
subrPortNameName of the subscriber.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.1.1.1 |
subrPortTelTelephone number of the subscriber.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.1.1.2 |
shdslPort OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.8.3 |
shdslLineConfTableThis table includes common attributes describing the SHDSL line. SEQUENCE OF ShdslLineConfEntry .1.3.6.1.4.1.890.1.5.5.6.8.3.1 |
shdslLineConfEntryAn entry in shdslLineConfTable. ShdslLineConfEntry .1.3.6.1.4.1.890.1.5.5.6.8.3.1.1 |
shdslLineConfShdslModeMode of the SHDSL port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.1 |
shdslLineConfPmmsNegotiated noise margin mode of the SHDSL port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.2 |
shdslLineConfPboModePower backoff mode of the SHDSL port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.3 |
shdslLineConfPboValuePower backoff value of the SHDSL port.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.4 |
shdslLineConfShdslTCModeTransmission Convergence Mode of the SHDSL port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.5 |
shdslPortBatchSet OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.8.3.2 |
shdslPortTargetThe managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc.rw OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.8.3.2.1 |
shdslPortOpsThe managed object is for SHDSL line configuration. When the EMS
wants to issue the desired operation, the EMS shall send SNMP-SET message to set
the corresponding bit value to be 1. The various bit positions are:
BIT 1: enable port
BIT 2: disable port
BIT 3: set SHDSL mode
BIT 4: set line profile
BIT 5: set alarm profile
BIT 6: set pmms mode to be normal
BIT 7: set pmms mode to be forced
BIT 8: set pbo mode to be normalepl
BIT 9: set pbo mode to be forcedepl
BIT 10: set pbo mode to be forcednoepl
BIT 11: set pbo valuerw INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.3.2.2 |
shdslModeForBatchSetMode of the SHDSL port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.8.3.2.3 |
shdslLineProfileForBatchSetThe SHDSL line profile.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.3.2.4 |
shdslAlarmProfileForBatchSetThe SHDSL alarm profile.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.3.2.5 |
shdslPboValueForBatchSetPower backoff value of the SHDSL port.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.3.2.6 |
pvc OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.8.4 |
maxNumOfPvcsThe maximum number of PVCs which could be created on a port.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.4.1 |
pvcTableThis table includes PVC configuration. SEQUENCE OF PvcEntry .1.3.6.1.4.1.890.1.5.5.6.8.4.2 |
pvcEntryAn entry in pvcTable. PvcEntry .1.3.6.1.4.1.890.1.5.5.6.8.4.2.1 |
pvcVpiVPI of the pvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.1 |
pvcVciVCI of the pvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.2 |
pvcPvidDefault VID of the pvc.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.3 |
pvcPriority802.1p default priority of the pvc.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.5 |
pvcProfileDSThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.6 |
pvcRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.7 |
pvcProfileUSThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.8 |
pvcUsRateLimitTableThis table defines the upstream rate limit for each PVC. SEQUENCE OF PvcUsRateLimitEntry .1.3.6.1.4.1.890.1.5.5.6.8.4.4 |
pvcUsRateLimitEntryAn entry in pvcUsRateLimitTable. PvcUsRateLimitEntry .1.3.6.1.4.1.890.1.5.5.6.8.4.4.1 |
pvcUsRateLimitEnableEnable/disable upstream rate limit for a PVC.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.8.4.4.1.1 |
pvcUsRateLimitUpstream rate limit in Kbps for a PVC.rw INTEGER UNITS "Kbps" .1.3.6.1.4.1.890.1.5.5.6.8.4.4.1.2 |
ppvc OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.8.5 |
maxNumOfPriorityPvcsThe maximum number of priority PVCs which could be created on a port.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.5.1 |
ppvcTableThis table includes priority PVC configuration. SEQUENCE OF PpvcEntry .1.3.6.1.4.1.890.1.5.5.6.8.5.2 |
ppvcEntryAn entry in ppvcTable. PpvcEntry .1.3.6.1.4.1.890.1.5.5.6.8.5.2.1 |
ppvcVpiVPI of the ppvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.1 |
ppvcVciVCI of the ppvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.2 |
ppvcPvidDefault VID of the ppvc.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.3 |
ppvcEncapEncapsulation of the ppvc.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.4 |
ppvcPriority802.1p default priority of the ppvc.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.5 |
ppvcRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.6 |
ppvcMemberTableThis table includes priority PVC member configuration. SEQUENCE OF PpvcMemberEntry .1.3.6.1.4.1.890.1.5.5.6.8.5.4 |
ppvcMemberEntryAn entry in ppvcMemberTable. PpvcMemberEntry .1.3.6.1.4.1.890.1.5.5.6.8.5.4.1 |
ppvcMemberVpiVPI of the member ppvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.1 |
ppvcMemberVciVCI of the member ppvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.2 |
ppvcMemberPriority802.1p default priority of the member ppvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.3 |
ppvcMemberProfileDSThe profile of the member ppvc in DS side.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.4 |
ppvcMemberRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.5 |
ppvcMemberProfileUSThe profile of the member ppvc in US side.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.6 |
portOperation OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.8.6 |
portTargetThe managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc.rw OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.8.6.1 |
portOpsThe managed object is for xDSL line configuration. When the EMS
wants to issue the desired operation, the EMS shall send SNMP-SET message to set
the corresponding bit value to be 1. The various bit positions are:
BIT 1: enable port
BIT 2: disable portrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.6.2 |
rpvc OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.8.8 |
rpvcGatewayTableThis table includes Routed Gateway configuration. SEQUENCE OF RpvcGatewayEntry .1.3.6.1.4.1.890.1.5.5.6.8.8.1 |
rpvcGatewayEntryAn entry in Routed Gateway table. RpvcGatewayEntry .1.3.6.1.4.1.890.1.5.5.6.8.8.1.1 |
rpvcGatewayIpIP of RPVC gateway.ro IpAddress .1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.1 |
rpvcGatewayVlanIdVlan id send to this RPVC gateway.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.2 |
rpvcGatewayRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.3 |
rpvcGatewayPriority802.1p p bit send to this RPVC gateway.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.4 |
rpvcTableThis table includes RPVC configuration. SEQUENCE OF RpvcTableEntry .1.3.6.1.4.1.890.1.5.5.6.8.8.2 |
rpvcTableEntryAn entry in rpvcTable. RpvcTableEntry .1.3.6.1.4.1.890.1.5.5.6.8.8.2.1 |
rpvcVpiVPI of the rpvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.1 |
rpvcVciVCI of the rpvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.2 |
rpvcDSProfileThe down stream profile of the rpvc.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.3 |
rpvcUSProfileThe up stream profile of the rpvc.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.4 |
rpvcIpThe IP of the rpvc.ro IpAddress .1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.5 |
rpvcNetmaskThe IP mask of the rpvc IP.ro IpAddress .1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.6 |
rpvcGatewayIpAddressThe gateway IP of rpvc.rw IpAddress .1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.7 |
rpvcRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.8 |
rpvcRouteDomainTableThis table includes RPVC route domain configuration. SEQUENCE OF RpvcRouteDomainTableEntry .1.3.6.1.4.1.890.1.5.5.6.8.8.3 |
rpvcRouteDomainTableEntryAn entry in rpvcRouteDomainTable. RpvcRouteDomainTableEntry .1.3.6.1.4.1.890.1.5.5.6.8.8.3.1 |
rpvcRouteDomainVpiVPI of the rpvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.1 |
rpvcRouteDomainVciVCI of the rpvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.2 |
rpvcRouteDomainIpThe route domain IP.ro IpAddress .1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.3 |
rpvcRouteDomainNetmaskThe IP mask of the route domain IP.ro IpAddress .1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.4 |
rpvcRouteDomainRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.5 |
rpvcArpAgingTimeSet RPVC ARP proxy aging time 10..10000 seconds,
0 to disable againg.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.8.4 |
rpvcArpFlushFlush the RPVC ARP proxy table.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.8.8.5 |
dsBcastDisableTableThis table includes Down Stream Bcast configuration. SEQUENCE OF DsBcastDisableEntry .1.3.6.1.4.1.890.1.5.5.6.8.9 |
dsBcastDisableEntryAn entry in Down Stream Bcast table. DsBcastDisableEntry .1.3.6.1.4.1.890.1.5.5.6.8.9.1 |
dsBcastDisableVlanIddownstream broadcast disabled vid.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.9.1.1 |
dsBcastDisableRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.9.1.2 |
paepvc OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.8.10 |
paepvcTableThis table includes PPPoAoE PVC configuration. SEQUENCE OF PaePvcEntry .1.3.6.1.4.1.890.1.5.5.6.8.10.1 |
paepvcEntryAn entry of paepvcTable. PaePvcEntry .1.3.6.1.4.1.890.1.5.5.6.8.10.1.1 |
paepvcVpiVPI of the pvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.1 |
paepvcVciVCI of the pvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.2 |
paepvcPvidDefault VID of the pvc.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.3 |
paepvcPriority802.1p default priority of the pvc.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.5 |
paepvcProfileDSThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.6 |
paepvcAcNameAccess concentrator name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.7 |
paepvcServiceNameService name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.8 |
paepvcHelloTimeThe system will close the PVC if there are not any LCP echo messages passed through
during the LCP hello time.rw INTEGER UNITS "second" .1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.9 |
paepvcRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.10 |
paepvcProfileUSThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.11 |
tlspvc OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.8.11 |
tlspvcTableThis table includes Transparent LAN Service (TLS) PVC configuration. SEQUENCE OF TlsPvcEntry .1.3.6.1.4.1.890.1.5.5.6.8.11.1 |
tlspvcEntryAn entry of tlspvcTable. TlsPvcEntry .1.3.6.1.4.1.890.1.5.5.6.8.11.1.1 |
tlspvcVpiVPI of the pvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.1 |
tlspvcVciVCI of the pvc.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.2 |
tlspvcSvids-tag VLAN ID of the pvc.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.3 |
tlspvcSprioritys-tag priority of the pvc.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.5 |
tlspvcProfileDSThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.6 |
tlspvcRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.7 |
tlspvcProfileUSThe value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.8 |
gbond OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.8.51 |
gbondGroupTableA table containing the G.Bond configuration information for
each bonding group of the device. SEQUENCE OF GbondGroupEntry .1.3.6.1.4.1.890.1.5.5.6.8.51.1 |
gbondGroupEntryAn entry of gbondTable. GbondGroupEntry .1.3.6.1.4.1.890.1.5.5.6.8.51.1.1 |
gbondGroupNameAn administratively assigned string, which may be used to identify bonding group.ro OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.1 |
gbondGroupPortsThe set of ports which are currently assigned to the
bonding group of specified group name.
Byte 1: Reserved(chassis)
Byte 2~3: Reserved(slot)
Byte 4: Reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the
port 3, 4 and 7.
Byte 6~10:Reservedrw OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.2 |
gbondGroupSidThis object indicates the sequence index mode of the bonding group.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.3 |
gbondGroupUpRateThe UP stream rate.ro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.4 |
gbondGroupDownRateThe DOWN stream rate.ro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.5 |
gbondGroupRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.6 |
switch OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.10 |
dscp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.10.10 |
dscpMappingTableThe table contains DSCP mapping configuration for the adsl and ethernet ports. SEQUENCE OF DscpMappingEntry .1.3.6.1.4.1.890.1.5.5.6.10.10.1 |
dscpMappingEntryAn entry of dscpMappingTable. DscpMappingEntry .1.3.6.1.4.1.890.1.5.5.6.10.10.1.1 |
dscpSrcCodePointThe DSCP source code point used for mapping.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.10.1.1.1 |
dscpMapPriorityThe mapping p bits that will replace the source p bits in the incoming packet.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.10.1.1.3 |
dscpPortTableThe table contains DSCP mapping configuration for the adsl and ethernet ports. SEQUENCE OF DscpPortEntry .1.3.6.1.4.1.890.1.5.5.6.10.10.2 |
dscpPortEntryAn entry of dscpPortTable. DscpPortEntry .1.3.6.1.4.1.890.1.5.5.6.10.10.2.1 |
dscpStatusEnableThe DSCP port status.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.10.2.1.1 |
vlanIsolation OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.10.12 |
vlanIsolationTableA table contains configuration of isolated VLAN. SEQUENCE OF VlanIsolationEntry .1.3.6.1.4.1.890.1.5.5.6.10.12.1 |
vlanIsolationEntryAn entry of vlanIsolationTable. VlanIsolationEntry .1.3.6.1.4.1.890.1.5.5.6.10.12.1.1 |
vlanIsolationRowStatusRow status of the table used to create/delete an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.12.1.1.1 |
enetMtu OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.10.13 |
enetMaxMtuSets the maximum MTU size for layer 2 frame, size from 1526 to 1600, default value is 1526.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.13.1 |
dhcp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.10.51 |
dhcpRelayEnableEnable/disable DHCP relay Option82 function.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.51.1 |
dhcpRelay82TableA table that contains DHCP Relay configuration. SEQUENCE OF DhcpRelay82Entry .1.3.6.1.4.1.890.1.5.5.6.10.51.2 |
dhcpRelay82EntryThe entry of DHCP Relay table. DhcpRelay82Entry .1.3.6.1.4.1.890.1.5.5.6.10.51.2.1 |
dhcpRelay82PrimaryServerThe IP address of the DHCP Relay primary server.rw IpAddress .1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.1 |
dhcpRelay82SecondaryServerThe IP address of the DHCP Relay secondary server.rw IpAddress .1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.2 |
dhcpRelay82ActiveServerThe current active DHCP Relay server.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.3 |
dhcpRelay82EnableEnable/disable DHCP relay and Option82 function.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.4 |
dhcpRelay82InfoUser specific Option82 information.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.5 |
dhcpRelay82RelayModeDHCP relay mode.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.6 |
dhcpRelay82Suboption2EnableEnable/disable Option 82 sub-option 2.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.8 |
dhcpRelay82Suboption2InfoUser specified information for Option 82 sub-option 2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.9 |
dhcpRelay82EntryEnableEnable/disable DHCP Relayrw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.10 |
dhcpRelay82EntryOptionModeOption82 format.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.11 |
dhcpRelayOption82Sub1InfoUser specific Option82 subOption1 (Agent circuit ID) information.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.10.51.3 |
maxNumOfDhcpRelay82ConfThe maximum number of rows that can be created in dhcpRelay82Table.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.51.4 |
dhcpRelayOption82Sub1EnableEnable/disable DHCP relay Option82 subOption1 (Agent Circuit ID) function.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.51.5 |
dhcpRelayOption82Sub2InfoUser specific Option82 subOption2 (Agent Remote ID) information.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.10.51.6 |
dhcpRelayOption82Sub2EnableEnable/disable DHCP relay Option82 subOption2 (Agent Remote ID) function.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.51.7 |
macfilter OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.10.53 |
macFilterPortTableThis table includes the status of mac filtering for each port. SEQUENCE OF MacFilterPortEntry .1.3.6.1.4.1.890.1.5.5.6.10.53.1 |
macFilterPortEntryAn entry in macFilterPortTable. MacFilterPortEntry .1.3.6.1.4.1.890.1.5.5.6.10.53.1.1 |
macFilterPortEnableEnable/disable MAC filtering for the port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.1 |
macFilterPortMacCountThe total number of MAC addresses allowed for the port.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.2 |
macFilterPortFilterModeThe mac filter mode (accept or deny) for the port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.3 |
maxNumOfMacFiltersInSystemThe max number of mac filters supported in the system.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.53.2 |
maxNumOfMacFiltersPerPortThe max number of mac filters supported per port.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.53.3 |
currNumOfMacFiltersInSystemThe current number of mac filters in the system.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.53.4 |
macFilterTableA table that contains the mac filter addresses. SEQUENCE OF MacFilterEntry .1.3.6.1.4.1.890.1.5.5.6.10.53.5 |
macFilterEntryThe entry of macFilterTable. MacFilterEntry .1.3.6.1.4.1.890.1.5.5.6.10.53.5.1 |
macFilterAddrThe mac address which can pass through or be rejected from the port.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.53.5.1.1 |
macFilterRowStatusThe row status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.53.5.1.2 |
macfilterBatchSet OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.10.53.6 |
macfilterTargetThis managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: 0, Reserved(chassis)
Byte 2~3: 0, Reserved(slot)
Byte 4: 0, reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc.rw OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.10.53.6.1 |
macfilterOpsThe corresponding bit is set to 1 to start the operation.
The various bit positions are:
BIT 1: enable mac filter
BIT 2: enable mac count filter
BIT 3: disable mac filter
BIT 4: set mac count
BIT 5: disable mac count filter.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.53.6.2 |
macFilterMacCountForBatchSetThe total number of MAC addresses allowed for a port.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.53.6.3 |
ouiFilterTableA table that contains the OUI filter addresses. SEQUENCE OF OuiFilterEntry .1.3.6.1.4.1.890.1.5.5.6.10.53.7 |
ouiFilterEntryThe entry of ouiFilterTable. OuiFilterEntry .1.3.6.1.4.1.890.1.5.5.6.10.53.7.1 |
ouiFilterAddrThe first three bytes of the mac address which can pass through or be rejected from the port.ro OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.10.53.7.1.1 |
ouiFilterRowStatusThe row status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.53.7.1.2 |
maxNumOfOuiFiltersPerPortThe max number of OUI filters supported per port.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.53.8 |
ouiFilterPortTableThis table includes the status of oui filtering for each port. SEQUENCE OF OuiFilterPortEntry .1.3.6.1.4.1.890.1.5.5.6.10.53.9 |
ouiFilterPortEntryAn entry in macFilterPortTable. OuiFilterPortEntry .1.3.6.1.4.1.890.1.5.5.6.10.53.9.1 |
ouiFilterPortEnableEnable/disable oui filtering for the port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.53.9.1.1 |
ouiFilterPortFilterModeThe oui filter mode (accept or deny) for the port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.53.9.1.2 |
dhcpSnoop OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.10.55 |
dhcpSnoopPortTableThis table includes DHCP snooping enable/disable for each port. SEQUENCE OF DhcpSnoopPortEntry .1.3.6.1.4.1.890.1.5.5.6.10.55.1 |
dhcpSnoopPortEntryAn entry of dhcpSnoopPortTable. DhcpSnoopPortEntry .1.3.6.1.4.1.890.1.5.5.6.10.55.1.1 |
dhcpSnoopEnableEnable/disable DHCP snooping for a port.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.55.1.1.1 |
dhcpSnoopTargetThis managed object is used for identify the target on which
the operation should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc.rw OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.10.55.2 |
dhcpSnoopOpsThe corresponding bit is set to 1 to start the operation.
The various bit positions are:
BIT 1: DHCP snooping table flush.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.55.3 |
dhcpStaticTableThis table defines DHCP static IP addresses. SEQUENCE OF DhcpStaticEntry .1.3.6.1.4.1.890.1.5.5.6.10.55.4 |
dhcpStaticEntryAn entry of dhcpStaticTable. DhcpStaticEntry .1.3.6.1.4.1.890.1.5.5.6.10.55.4.1 |
dhcpStaticIpAddrThe IP address which can pass through the port.ro IpAddress .1.3.6.1.4.1.890.1.5.5.6.10.55.4.1.1 |
dhcpStaticRowStatusRow status of the table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.55.4.1.2 |
maxNumOfDhcpStaticIpThe maximum number of DHCP static IP addresses which can be created for a port.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.55.5 |
dhcpSnoopLan2lanEnableEnable/disable DHCP snoop lan2lan function.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.55.6 |
acl OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.10.56 |
aclSetTableaclsetTable. SEQUENCE OF AclSetEntry .1.3.6.1.4.1.890.1.5.5.6.10.56.1 |
aclSetEntryAn entry of aclSetTable. AclSetEntry .1.3.6.1.4.1.890.1.5.5.6.10.56.1.1 |
aclSetVpiVPI valuero INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.1 |
aclSetVciVCI valuero INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.2 |
aclSetProfileNameACL Profile namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.3 |
aclSetRowStatusRowStatus of aclSetEntryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.4 |
aclProfileTableaclProfileTable. SEQUENCE OF AclProfileEntry .1.3.6.1.4.1.890.1.5.5.6.10.56.2 |
aclProfileEntryAn entry of aclProfileTable. AclProfileEntry .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1 |
aclProfileRuleNameProfile rule namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.1 |
aclProfileRuleNumberThe managed object is for acl profile rule configuration.
etype <etype> vlan <vid> (1),
etype <etype> smac <mac> (2),
etype <etype> dmac <mac> (3),
vlan <vid> smac <mac> (4),
vlan <vid> dmac <mac> (5),
smac <mac> dmac <mac> (6),
vlan <vid> priority <priority> (7),
etype <etype> (8),
vlan <vid> (9),
smac <mac> (10),
dmac <mac> (11),
priority <priority> (12),
protocol <protocol> (13),
{srcip <ip>/<mask>{|dstip <ip>/<mask>{|tos <stos> <etos>{|srcport <sport> <eport> {|dstport <sport> <eport>}}}}} (14)rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.2 |
aclProfileActionNumberProfile action number.
Bit 1: rate
Bit 2: rvlan
Bit 3: rpri
Bit 4: deny
Bit 1, Bit 2 & Bit 3 can multiple selection.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.3 |
aclProfileRuleParamMaskProfile rule parameter mask.
BIT 1: srcip <ip>/<mask>
BIT 2: dstip <ip>/<mask>
BIT 3: tos <stos> <etos>
BIT 4: srcport <sport> <eport>
BIT 5: dstport <sport> <eport>rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.4 |
aclProfileRuleEtypeProfile rule etyperw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.5 |
aclProfileRuleVidProfile rule vidrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.6 |
aclProfileRuleSmacProfile rule source MACrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.7 |
aclProfileRuleDmacProfile rule destination MACrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.8 |
aclProfileRulePriorityProfile rule priorityrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.9 |
aclProfileRuleProtocolProfile rule protocol.
icmp(1),igmp(2),ip(4),tcp(6),
udp(17),gre(47),ospf(89),
other ptyperw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.10 |
aclProfileRuleSrcIPProfile rule source IPrw IpAddress .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.11 |
aclProfileRuleSrcIPMaskThe subnet mask of source IP maskrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.12 |
aclProfileRuleDestIPProfile rule source IPrw IpAddress .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.13 |
aclProfileRuleDestIPMaskThe subnet mask of dest IP maskrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.14 |
aclProfileRuleStartTosProfile rule start type of servicerw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.15 |
aclProfileRuleEndTosProfile rule end type of servicerw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.16 |
aclProfileRuleSrcStartPortProfile rule source start portrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.17 |
aclProfileRuleSrcEndPortProfile rule source end portrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.18 |
aclProfileRuleDestStartPortProfile rule destination start portrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.19 |
aclProfileRuleDestEndPortProfile rule destination end portrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.20 |
aclProfileActionRateProfile action to replace to this raterw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.21 |
aclProfileActionrvlanProfile action to replace to this vlanrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.22 |
aclProfileActionrpriProfile action to replace to this priorityrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.23 |
aclProfileRowStatusThe row status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.24 |
pppoeAgent OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.10.57 |
pppoeAgentTableA table that contains PPPoE DHCP Relay configuration. SEQUENCE OF PppoeAgentEntry .1.3.6.1.4.1.890.1.5.5.6.10.57.1 |
pppoeAgentEntryAn entry of pppoeAgentTable. PppoeAgentEntry .1.3.6.1.4.1.890.1.5.5.6.10.57.1.1 |
pppoeAgentEnableEnable/disable DHCP relay and Option82 function.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.1 |
pppoeAgentInfoUser specific Option82 information.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.2 |
pppoeAgentRowStatusRow status of the table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.3 |
pppoeAgentOptionModeOption82 format.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.4 |
maxNumOfPppoeAgentConfThe maximum number of rows that can be created in pppoeAgentTable.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.10.57.2 |
sys OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.11 |
accessCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.11.5 |
securedClientTableA table that contains information about secured clients. SEQUENCE OF SecuredClientEntry .1.3.6.1.4.1.890.1.5.5.6.11.5.2 |
securedClientEntryA list of secured client entry. SecuredClientEntry .1.3.6.1.4.1.890.1.5.5.6.11.5.2.1 |
securedClientIndexThe index of the entry.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.1 |
securedClientStartIpThe starting IP address of the secured client set.rw IpAddress .1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.2 |
securedClientEndIpThe ending IP address of the secured client set.rw IpAddress .1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.3 |
securedClientServiceEach bit corresponds to a service. The bit is set to 1 if the
service is enabled, and set to 0 if the service is disabled.
The various bit positions are:
BIT 1: telnet
BIT 2: ftp
BIT 3: web
BIT 4: icmp
BIT 5: ssh
BIT 6: snmp.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.4 |
securedClientEnableEnable/disable the entry.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.5 |
extAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.11.8 |
extAlarmTableA table that contains external alarm information. SEQUENCE OF ExtAlarmEntry .1.3.6.1.4.1.890.1.5.5.6.11.8.1 |
extAlarmEntryThe entry of external alarm table. ExtAlarmEntry .1.3.6.1.4.1.890.1.5.5.6.11.8.1.1 |
extAlarmIndexThe index of the entry.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.1 |
extAlarmnameThe external alarm name.rw DisplayString .1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.2 |
extAlarmstatusDispaly 'Normal' or 'Alarm' stringro DisplayString .1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.3 |
user OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.11.9 |
userAuthModeUser authentication procsssing mode.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.11.9.1 |
userAuthServerIpThe IP address of the authentication server.rw IpAddress .1.3.6.1.4.1.890.1.5.5.6.11.9.2 |
userAuthServerPortThe port of the authentication server.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.11.9.3 |
userAuthServerSecretThe secret between the authentication server and the NE for authentication process.rw OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.11.9.4 |
userTableA table that contains user information. SEQUENCE OF UserEntry .1.3.6.1.4.1.890.1.5.5.6.11.9.5 |
userEntryAn entry of userTable. UserEntry .1.3.6.1.4.1.890.1.5.5.6.11.9.5.1 |
userNameThe user name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.1 |
userPasswordThe user password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.2 |
userPriviledgeThe user priviledge to decide what operation the user can and cannot do.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.3 |
userRowStatusThe row status used to create or delete a user.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.4 |
userAuthDefaultPriviledgeThe user default priviledge to be assigned when radius authentication succeds
but no user priviledge information(radius service-type) is provided.rw Enumeration .1.3.6.1.4.1.890.1.5.5.6.11.9.6 |
sysSlotIdDevice slot ID(0...255).rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.11.10 |
stdioTimeoutSet the stdio timeout, 0~360 minutes.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.11.12 |
trap OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.12 |
object OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.12.1 |
eqptAlarmInputIndexThe index of alarm input.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.12.1.2 |
eqptAlarmInputNameThe Name of alarm input.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.12.1.8 |
sysMacAntiSpoofOrigThe Original port of Mac-AntiSpoofing.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.12.1.9 |
sysMacAntiSpoofNewThe New port of Mac-AntiSpoofing.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.12.1.10 |
sysMacAntiSpoofMACThe MAC of Mac-AntiSpoofing.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.12.1.11 |
equipment OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.12.3 |
eqptHWMonitorFailureHardware monitor diagnosis is failed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.5.6.12.3.1 |
systrap OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.12.4 |
sysMacAntiSpoofingMAC Anti-spoofing. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.5.6.12.4.1 |
sysAlarmCutoffEnableAlarm cutoff is activated. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.5.6.12.4.2 |
sysAlarmClearEnableAlarm clear is activated. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.5.6.12.4.3 |
sysLoginFailureUser login is failed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.5.6.12.4.4 |
statistics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.13 |
igmpQueryCntTotalThe total number of IGMP query messages received.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.1 |
igmpReportCntTotalThe total number of IGMP report messages received.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.2 |
igmpLeaveCntTotalThe total number of IGMP leave messages received.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.3 |
igmpNumOfActiveGroupsThe total number of IGMP learned groups.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.4 |
igmpGroupTableThis table includes igmp group information. SEQUENCE OF IgmpGroupEntry .1.3.6.1.4.1.890.1.5.5.6.13.5 |
igmpGroupEntryAn entry in igmpGroupTable. IgmpGroupEntry .1.3.6.1.4.1.890.1.5.5.6.13.5.1 |
igmpGroupvidvlan idro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.5.1.2 |
igmpGroupnumberOfMembersnumber Of Membersro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.5.1.3 |
igmpGroupPortTableThis table includes igmp Group port information. SEQUENCE OF IgmpGroupPortEntry .1.3.6.1.4.1.890.1.5.5.6.13.6 |
igmpGroupPortEntryAn entry in igmpGroupPortTable. IgmpGroupPortEntry .1.3.6.1.4.1.890.1.5.5.6.13.6.1 |
igmpGroupPortvidIgmp Group vidro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.6.1.2 |
igmpGroupTableV2A table that displays IGMP learned group member information. SEQUENCE OF IgmpGroupEntryV2 .1.3.6.1.4.1.890.1.5.5.6.13.7 |
igmpGroupEntryV2An entry of igmpGroupTableV2. IgmpGroupEntryV2 .1.3.6.1.4.1.890.1.5.5.6.13.7.1 |
igmpGroupVidThe IGMP group VLAN ID.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.5.6.13.7.1.1 |
igmpGroupIpThe multicast IP address.ro IpAddress .1.3.6.1.4.1.890.1.5.5.6.13.7.1.2 |
igmpGroupNumOfMembersThe number of member ports in the group.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.7.1.3 |
igmpGroupMemberPortsThe member port list of the group.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.5.6.13.7.1.4 |
igmpGroupPortTableV2A table that displays IGMP joined groups in this port. SEQUENCE OF IgmpGroupPortEntryV2 .1.3.6.1.4.1.890.1.5.5.6.13.8 |
igmpGroupPortEntryV2An entry of igmpGroupPortTableV2. IgmpGroupPortEntryV2 .1.3.6.1.4.1.890.1.5.5.6.13.8.1 |
igmpGroupPortVidThe IGMP group VLAN ID.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.5.6.13.8.1.1 |
igmpGroupPortIpThe multicast IP address.ro IpAddress .1.3.6.1.4.1.890.1.5.5.6.13.8.1.2 |
igmpGroupPortSourceIpThe source IP address that joins the IGMP group.ro IpAddress .1.3.6.1.4.1.890.1.5.5.6.13.8.1.3 |
igmpPortCtrlPduTableA table that displays IGMP related counter values in this port. SEQUENCE OF IgmpPortCtrlPduEntry .1.3.6.1.4.1.890.1.5.5.6.13.9 |
igmpPortCtrlPduEntryAn entry of igmpPortCtrlPduTable. IgmpPortCtrlPduEntry .1.3.6.1.4.1.890.1.5.5.6.13.9.1 |
igmpPortCtrlPduQueryCntThe total number of IGMP query messages received in this port.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.9.1.1 |
igmpPortCtrlPduReportCntThe total number of IGMP report messages received in this port.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.9.1.2 |
igmpPortCtrlPduLeaveCntThe total number of IGMP leave messages received in this port.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.9.1.3 |
igmpPortNumOfActiveGroupsThe total number of active IGMP groups in this port.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.9.1.4 |
dhcpStats OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.13.11 |
dhcpSnoopIpTableThis table shows the IP addresses and netmasks offered by the DHCP server. SEQUENCE OF DhcpSnoopIpEntry .1.3.6.1.4.1.890.1.5.5.6.13.11.1 |
dhcpSnoopIpEntryAn entry of dhcpSnoopIpTable. DhcpSnoopIpEntry .1.3.6.1.4.1.890.1.5.5.6.13.11.1.1 |
dhcpSnoopIpThe snooped IP address.ro IpAddress .1.3.6.1.4.1.890.1.5.5.6.13.11.1.1.1 |
dhcpSnoopMacThe snooped MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.13.11.1.1.2 |
dhcpSnoopCounterTableThis table shows the DHCP statistics. SEQUENCE OF DhcpSnoopCounterEntry .1.3.6.1.4.1.890.1.5.5.6.13.11.2 |
dhcpSnoopCounterEntryAn entry of dhcpSnoopCounterTable. DhcpSnoopCounterEntry .1.3.6.1.4.1.890.1.5.5.6.13.11.2.1 |
dhcpDiscoveryThe total number of received DHCP server discovery packets.ro Counter64 .1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.1 |
dhcpOfferThe total number of received DHCP server offer packets.ro Counter64 .1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.2 |
dhcpRequestThe total number of received DHCP IP request packets.ro Counter64 .1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.3 |
dhcpAckThe total number of received DHCP IP acknowledge packets.ro Counter64 .1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.4 |
dhcpAckBySnoopFullThe total number of received DHCP IP acknowledge packets that replace the oldest snooping
entry in snooping table due to table full.ro Counter64 .1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.5 |
paepvcStats OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.13.12 |
paepvcSessionTableThis table shows the paepvc session statistics. SEQUENCE OF PaepvcSessionEntry .1.3.6.1.4.1.890.1.5.5.6.13.12.1 |
paepvcSessionEntryAn entry of paepvcSessionTable. PaepvcSessionEntry .1.3.6.1.4.1.890.1.5.5.6.13.12.1.1 |
paepvcSessionVpiThe PAEPVC VPI.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.1 |
paepvcSessionVciThe PAEPVC VCI.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.2 |
paepvcSessionStateThe PAEPVC status.ro Enumeration .1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.3 |
paepvcSessionIdThe PAEPVC session ID.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.4 |
paepvcSessionUptimeThe PAEPVC session uptime.ro Unsigned32 UNITS "second" .1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.5 |
paepvcSessionacnameAccess concentrator name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.6 |
paepvcSessionsrvcnameService name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.7 |
paepvcCountTableThis table shows the paepvc counters. SEQUENCE OF PaepvcCountEntry .1.3.6.1.4.1.890.1.5.5.6.13.12.2 |
paepvcCountEntryAn entry of paepvcCountTable. PaepvcCountEntry .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1 |
paepvcCountVpiThe PAEPVC VPI.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.1 |
paepvcCountVciThe PAEPVC VCI.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.2 |
paepvcCountPppLcpCfgReqRxThe number of ppp lcp config-request received.ro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.3 |
paepvcCountPppLcpEchoReqRxThe number of ppp lcp echo-request received.ro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.4 |
paepvcCountPppLcpEchoReplyRxThe number of ppp lcp echo-reply received.ro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.5 |
paepvcCountPadiTxThe number of pppoe padi transferedro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.6 |
paepvcCountPadoRxThe number of pppoe pado receivedro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.7 |
paepvcCountPadrTxThe number of pppoe padr transferedro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.8 |
paepvcCountPadsRxThe number of pppoe pads receivedro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.9 |
paepvcCountPadtTxThe number of pppoe padt transferedro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.10 |
paepvcCountPadtRxThe number of pppoe padt receivedro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.11 |
paepvcCountSrvcnameErrRxThe number of pppoe service name error receivedro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.12 |
paepvcCountAcSystemErrRxThe number of pppoe access concentrator name error receivedro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.13 |
paepvcCountGenericErrTxThe number of pppoe generic error transferedro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.14 |
paepvcCountGenericErrRxThe number of pppoe generic error receivedro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.15 |
macStats OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.13.13 |
macDisplayTargetThis managed object is a filter used for identify the target from which
the MAC addresses are learned in macTable. The target could be:
99: all ports in the system
98: all subscriber ports
97: all Ethernet ports
IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50).rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.13.1 |
macTableA table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame. SEQUENCE OF MacEntry .1.3.6.1.4.1.890.1.5.5.6.13.13.2 |
macEntryAn entry of macTable. MacEntry .1.3.6.1.4.1.890.1.5.5.6.13.13.2.1 |
macAddressA unicast MAC address for which the bridge has
forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.1 |
macPortThe port from which the mac address has been learned.ro INTEGER .1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.2 |
macStatusThe status of this entry.ro Enumeration .1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.3 |
shdslStats OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.13.14 |
shdslLinePerfTableThe table displays SHDSL line performance. SEQUENCE OF ShdslLinePerfEntry .1.3.6.1.4.1.890.1.5.5.6.13.14.1 |
shdslLinePerfEntryAn entry of shdslLinePerfTable. ShdslLinePerfEntry .1.3.6.1.4.1.890.1.5.5.6.13.14.1.1 |
shdslLinePerfEsCount of Errored Seconds (ES) on this endpoint since link up.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.1 |
shdslLinePerfSesCount of Severely Errored Seconds (SES) on this endpoint since link up.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.2 |
shdslLinePerfCrcCount of CRC anomalies on this endpoint since link up.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.3 |
shdslLinePerfLoswsCount of Loss of Sync Word (LOSW) Seconds on this endpoint since link up.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.4 |
shdslLinePerfUasCount of Unavailable Seconds (UAS) on this endpoint since link up.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.5 |
shdslLinePerfSegmentAnomaliesCount of Segment Anomalies on this endpoint since link up.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.6 |
shdslLinePerfSegmentDefectCount of Segment Defects on this endpoint since link up.ro Counter .1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.7 |
gbondStats OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.13.51 |
gbondStateTableA table containing the G.Bond configuration information for
each bonding group of the device. SEQUENCE OF GbondStateEntry .1.3.6.1.4.1.890.1.5.5.6.13.51.1 |
gbondStateEntryAn entry of gbondTable. GbondStateEntry .1.3.6.1.4.1.890.1.5.5.6.13.51.1.1 |
gbondStateNameAn administratively assigned string, which identifies the bonding group.ro OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.1 |
gbondStateSidThis object indicates the sequence index mode of the bonding group.ro Enumeration .1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.2 |
gbondStateUpRateThe current up stream rate.ro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.3 |
gbondStateDownRateThe current down stream rate.ro Unsigned32 .1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.4 |
gbondStateMemberIndicate if the port is a member port of the bonding group.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7.ro OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.5 |
gbondStatelinkupIndicate if the link status of port is bidirectional.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7.ro OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.6 |
gbondStateTxIndicate if the link status of port is Tx only.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7.ro OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.7 |
gbondStateRxIndicate if the link status of port is Rx only.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7.ro OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.8 |
gbondStatelinkdownIndicate if the link status of the port is down.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7.ro OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.9 |
clear OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.5.6.14 |
counterClearTargetThis managed object is used for identify the target on which
the counter would be cleared. The target is encoded as:
Byte 1: reserved
Byte 2~3: reserved
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc.rw OCTET STRING .1.3.6.1.4.1.890.1.5.5.6.14.1 |
counterClearOpsThe corresponding bit is set to 1 to start the operation.
The various bit positions are:
BIT 1: clear interface counters
BIT 2: clear pvc packet counters
BIT 3: clear port ATM counters
BIT 4: clear pvc ATM counters
BIT 5: clear DHCP counters
BIT 6: clear IGMP counters
BIT 7: clear IGMP port countersrw INTEGER .1.3.6.1.4.1.890.1.5.5.6.14.2 |
counterClearVpiVPI of the pvc whose counters would be cleared.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.14.3 |
counterClearVciVCI of the pvc whose counters would be cleared.rw INTEGER .1.3.6.1.4.1.890.1.5.5.6.14.4 |
More MIBs from ZyXEL
Browse all ZyXELMIBs →ZYXEL-IES5000-MIB
SNMP MIB module
3448 objects→
IES5206-MIB
The IES5206-MIB provides vendor-specific SNMP management capabilities for the IES5206, IES5212, and IES6217 industrial Ethernet switches, exposing proprietary objects for monitoring device health, interface statistics, and system configuration parameters. This private MIB extension enables granular visibility into hardware status, port-level metrics, and operational states specific to these Allied Telesis industrial networking platforms.
2259 objects→
ZYXEL-ves1724-56-MIB
SNMP MIB module
1842 objects→
ZYXEL-ves1608FE57-MIB
SNMP MIB module
1357 objects→
ZYXEL-XGS4700-48F-MIB
SNMP MIB module
1136 objects→
ZYXEL-MGS370012C-MIB
SNMP MIB module
1095 objects→