ZYXEL-REMOTE-PORT-MIRROR-MIB
AI MIB Summary
The ZYXEL-REMOTE-PORT-MIRROR-MIB manages remote port mirroring (RSPAN) configuration parameters on Zyxel network switches, specifically controlling session identifiers, source and destination port assignments, and encapsulation settings for traffic replication across VLAN boundaries.
The subtree for remote port mirror
Main OID:
zyxelRemotePortMirror.1.3.6.1.4.1.890.1.15.3.73
17
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
zyxelRemotePortMirrorThe subtree for remote port mirror MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.73 |
RFC1155-SMIThe subtree for remote port mirror Unknown .1.3.6.1.4.1.890.1.15.3.73 |
IF-MIBThe subtree for remote port mirror NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.73 |
zyxelRemotePortMirrorSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.73.1 |
zyRemotePortMirrorMaxNumberOfVlansThe maximum number of remote mirror VLAN entries that can be created.ro INTEGER .1.3.6.1.4.1.890.1.15.3.73.1.1 |
zyxelRemotePortMirrorTableThe table contains remote port mirror configuration. SEQUENCE OF ZyxelRemotePortMirrorEntry .1.3.6.1.4.1.890.1.15.3.73.1.2 |
zyxelRemotePortMirrorEntryAn entry contains remote port mirror configuration. ZyxelRemotePortMirrorEntry .1.3.6.1.4.1.890.1.15.3.73.1.2.1 |
zyRemotePortMirrorVidEnter the VLAN ID (1 to 4094) of the remote mirror VLAN. INTEGER .1.3.6.1.4.1.890.1.15.3.73.1.2.1.1 |
zyRemotePortMirrorSource8021pPrioritySelect a priority level (0-7) with which the Switch replaces the priority of packets from source
port (belonging to this remote mirror VLAN).rw INTEGER .1.3.6.1.4.1.890.1.15.3.73.1.2.1.2 |
zyRemotePortMirrorSourceIngressMirrorPortsSet port members to be the source ingress mirror-port.
The mirror-port is the port traffic that we mirrored:
1. Mirror-ports is only existed in source switch.
2. It can be any port type, such as Ether Channel, Fast Ethernet, Gigabit Ethernet, and so forth.
3. It can be monitored in multiple remote mirror VLAN.
4. It cannot be a monitor-port, reflector-port and connected-port.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.73.1.2.1.3 |
zyRemotePortMirrorSourceEgressMirrorPortsSet port members to be the source egress mirror-port.
The mirror-port is the port traffic that we mirrored:
1. Mirror-ports is only existed in source switch.
2. It can be any port type, such as Ether Channel, Fast Ethernet, Gigabit Ethernet, and so forth.
3. It can be monitored in multiple remote mirror VLAN.
4. It cannot be a monitor-port, reflector-port and connected-port.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.73.1.2.1.4 |
zyRemotePortMirrorSourceReflectorPortStateEnable/disable multi-mirroring on RMirror Source.
Once the multi-mirroring is enabled, the reflector-port can be used in the RMirrore Source.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.73.1.2.1.5 |
zyRemotePortMirrorSourceReflectorPortSet port members to be the source reflector-port.
The reflector port is the mechanism that copies packets onto an remote mirror VLAN.
The reflector port forwards only traffic from remote mirror VLAN with which it is affiliated:
1. A reflector-port is only existed in source switch.
2. Spanning tree is automatically disabled on a reflector-port.
3. It is a port set to loopback.
4. The reflector port loops back untagged traffic to the switch.
The traffic is then placed on the RSPAN VLAN and flooded to any trunk ports that carry the RSPAN VLAN.
5. The reflector-port can not be mirror-port and monitor-port.rw INTEGER .1.3.6.1.4.1.890.1.15.3.73.1.2.1.6 |
zyRemotePortMirrorDestinationMonitorPortSet the port number of the destination monitor port.
The monitor-port is the port that we can monitor the RMirror traffic:
1. A monitor-port is only in destination switch.
2. It can participate in only one RMirror VLAN at a time.
3. A monitor-port in one RMirror VLAN cannot be another RMirror VLAN.
4. A monitor-port can not be a mirror-port, reflector-port and connected-port.rw INTEGER .1.3.6.1.4.1.890.1.15.3.73.1.2.1.7 |
zyRemotePortMirrorDestinationMonitorPortTaggingEnable/Disable the destination monitor port which packet with tag.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.73.1.2.1.8 |
zyRemotePortMirrorConnectedPortsSet port members to be the connected-port.
The connected-port is the physical port connected to other switch in the same remote mirror VLAN:
1. The port must join the remote mirror VLAN.
2. The connected-port can not be mirror-port and monitor-port.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.73.1.2.1.9 |
zyRemotePortMirrorRowStatusThis object allows entries to be created and deleted from the remote mirror table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.73.1.2.1.10 |