Home/Catalog/ZYXEL-RATE-LIMIT-MIB

ZYXEL-RATE-LIMIT-MIB

AI MIB Summary

The ZYXEL-RATE-LIMIT-MIB enables monitoring and configuration of traffic shaping policies on ZyXEL network devices, specifically exposing counters and thresholds for bandwidth throttling, packet rate limits, and queue management parameters.

The subtree for rate limit

Main OID:

zyxelRateLimit.1.3.6.1.4.1.890.1.15.3.72

Objects

Active

Status

Dependencies

Imported Objects

Objects

13 total

Object Name	Syntax	OID
zyxelRateLimitThe subtree for rate limit MODULE-IDENTITY `.1.3.6.1.4.1.890.1.15.3.72`	MODULE-IDENTITY	`.1.3.6.1.4.1.890.1.15.3.72`
RFC1155-SMIThe subtree for rate limit Unknown `.1.3.6.1.4.1.890.1.15.3.72`	Unknown	`.1.3.6.1.4.1.890.1.15.3.72`
IF-MIBThe subtree for rate limit NOTIFICATION-TYPE `.1.3.6.1.4.1.890.1.15.3.72`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.890.1.15.3.72`
zyxelRateLimitSetup OBJECT IDENTIFIER `.1.3.6.1.4.1.890.1.15.3.72.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.890.1.15.3.72.1`
zyRateLimitStateEnabled/Disabled ingress/egress rate limiting for the switch.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.72.1.1`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.72.1.1`
zyxelRateLimitPortTableThe table contains rate limit port configuration. SEQUENCE OF ZyxelRateLimitPortEntry `.1.3.6.1.4.1.890.1.15.3.72.1.2`	SEQUENCE OF ZyxelRateLimitPortEntry	`.1.3.6.1.4.1.890.1.15.3.72.1.2`
zyxelRateLimitPortEntryAn entry contains rate limit port configuration. ZyxelRateLimitPortEntry `.1.3.6.1.4.1.890.1.15.3.72.1.2.1`	ZyxelRateLimitPortEntry	`.1.3.6.1.4.1.890.1.15.3.72.1.2.1`
zyRateLimitPortCommitStateEnabled/Disabled ingress commit rate limiting on the specified port.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.72.1.2.1.1`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.72.1.2.1.1`
zyRateLimitPortCommitRateSpecify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on the specified port. The commit rate should be less than the peak rate. The sum of commit rates cannot be greater than or equal to the uplink bandwidth.rw INTEGER `.1.3.6.1.4.1.890.1.15.3.72.1.2.1.2`	INTEGER	`.1.3.6.1.4.1.890.1.15.3.72.1.2.1.2`
zyRateLimitPortPeakStateEnabled/Disabled ingress peak rate limiting on the specified port.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.72.1.2.1.3`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.72.1.2.1.3`
zyRateLimitPortPeakRateSpecify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on the specified port.rw INTEGER `.1.3.6.1.4.1.890.1.15.3.72.1.2.1.4`	INTEGER	`.1.3.6.1.4.1.890.1.15.3.72.1.2.1.4`
zyRateLimitPortEgressStateEnabled/Disabled egress rate limiting on the specified port.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.72.1.2.1.5`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.72.1.2.1.5`
zyRateLimitPortEgressRateSpecify the maximum bandwidth allowed in kilobits per second (Kbps) for the out-going traffic flow on the specified port.rw INTEGER `.1.3.6.1.4.1.890.1.15.3.72.1.2.1.6`	INTEGER	`.1.3.6.1.4.1.890.1.15.3.72.1.2.1.6`

More MIBs from ZyXEL

Browse all ZyXELMIBs →

ZYXEL-IES5000-MIB

SNMP MIB module

3448 objects→

IES5206-MIB

The IES5206-MIB provides vendor-specific SNMP management capabilities for the IES5206, IES5212, and IES6217 industrial Ethernet switches, exposing proprietary objects for monitoring device health, interface statistics, and system configuration parameters. This private MIB extension enables granular visibility into hardware status, port-level metrics, and operational states specific to these Allied Telesis industrial networking platforms.

2259 objects→

ZYXEL-ves1724-56-MIB

SNMP MIB module

1842 objects→

ZYXEL-ves1608FE57-MIB

SNMP MIB module

1357 objects→

ZYXEL-XGS4700-48F-MIB

SNMP MIB module

1136 objects→

ZYXEL-MGS370012C-MIB

SNMP MIB module

1095 objects→