ZYXEL-RADIUS-MIB
AI MIB Summary
The ZYXEL-RADIUS-MIB provides SNMP access to monitor RADIUS authentication, authorization, and accounting (AAA) statistics on Zyxel network devices, specifically tracking session counts, authentication failures, and accounting record generation.
The subtree for radius
Main OID:
zyxelRadius.1.3.6.1.4.1.890.1.15.3.71
26
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
zyxelRadiusThe subtree for radius MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.71 |
RFC1155-SMIThe subtree for radius Unknown .1.3.6.1.4.1.890.1.15.3.71 |
IF-MIBThe subtree for radius NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.71 |
zyxelRadiusServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.71.1 |
zyxelRadiusAuthenticationServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.71.1.1 |
zyRadiusAuthenticationServerModeThis field is valid only if you configure multiple RADIUS servers. Select index-priority and the
switch tries to authenticate with the first configured RADIU server, if the RADIUS server does not
respond then this switch tries to authenticate with the second RADIUS server. Select round-robin to
alternate between the RADIUS servers that it sends authentication requests to.rw Enumeration .1.3.6.1.4.1.890.1.15.3.71.1.1.1 |
zyRadiusAuthenticationServerTimeoutSpecify the amount of time in seconds that the switch waits for an authentication request response
from the RADIUS server. If you are using index-priority for your authentication and you are using two
RADIUS servers then the timeout value is divided between the two RADIUS servers. For example, if you
set the timeout value to 30 seconds, then the Switch waits for a response from the first RADIUS server
for 15 seconds and then tries the second RADIUS server.rw INTEGER .1.3.6.1.4.1.890.1.15.3.71.1.1.2 |
zyxelRadiusAuthenticationServerTableThe table contains RADIUS authentication server configuration. SEQUENCE OF ZyxelRadiusAuthenticationServerEntry .1.3.6.1.4.1.890.1.15.3.71.1.1.3 |
zyxelRadiusAuthenticationServerEntryAn entry contains RADIUS authentication server configuration. ZyxelRadiusAuthenticationServerEntry .1.3.6.1.4.1.890.1.15.3.71.1.1.3.1 |
zyRadiusAuthenticationServerIndexAn index that uniquely identifies a RADIUS authentication entry. INTEGER .1.3.6.1.4.1.890.1.15.3.71.1.1.3.1.1 |
zyRadiusAuthenticationServerIpAddrEnter IP address of an external RADIUS authentication server.rw IpAddress .1.3.6.1.4.1.890.1.15.3.71.1.1.3.1.2 |
zyRadiusAuthenticationServerUdpPortThe default port of a RADIUS server for authentication is 1812. You need not change this value unless
your netwrok administrator instructs you to do so.rw INTEGER .1.3.6.1.4.1.890.1.15.3.71.1.1.3.1.3 |
zyRadiusAuthenticationServerSharedSecretSpecify a password as the key to be shared between the external RADIUS authentication server and the
switch. This key is not sent over the network. This key must be the same on the external RADIUS
authentication server and the switch.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.71.1.1.3.1.4 |
zyxelRadiusAccountingServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.71.1.2 |
zyRadiusAccountingServerTimeoutSpecify the amount of time in seconds that the switch waits for an accounting request response from
the RADIUS accounting server.rw INTEGER .1.3.6.1.4.1.890.1.15.3.71.1.2.1 |
zyxelRadiusAccountingServerTableThe table contains RADIUS accounting server configuration. SEQUENCE OF ZyxelRadiusAccountingServerEntry .1.3.6.1.4.1.890.1.15.3.71.1.2.2 |
zyxelRadiusAccountingServerEntryAn entry contains RADIUS accounting server configuration. ZyxelRadiusAccountingServerEntry .1.3.6.1.4.1.890.1.15.3.71.1.2.2.1 |
zyRadiusAccountingServerIndexAn index that uniquely identifies a RADIUS accounting entry. INTEGER .1.3.6.1.4.1.890.1.15.3.71.1.2.2.1.1 |
zyRadiusAccountingServerIpAddrEnter IP address of an external RADIUS accounting server.rw IpAddress .1.3.6.1.4.1.890.1.15.3.71.1.2.2.1.2 |
zyRadiusAccountingServerUdpPortThe default port of a RADIUS accounting server for accounting is 1813. You need not change this
value unless your network administator instructs you to do so.rw INTEGER .1.3.6.1.4.1.890.1.15.3.71.1.2.2.1.3 |
zyRadiusAccountingServerSharedSecretSpecify a password as the key to be shared between the external RADIUS accounting server and the
switch. This key is not sent over the network. This key must be the same on the external RADIUS
accounting server and the switchrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.71.1.2.2.1.4 |
zyxelRadiusServerNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.71.2 |
zyRadiusServerAuthenticationServerNotReachableRADIUS authentication server is not reachable. Network element does not receive replies from RADIUS
authentication server. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.71.2.1 |
zyRadiusServerAccountingServerNotReachableRADIUS accounting server is not reachable. Network element does not receive replies from RADIUS
accounting server. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.71.2.2 |
zyRadiusServerAuthenticationServerNotReachableRecoveredRADIUS authentication server is recovered to rechable. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.71.2.3 |
zyRadiusServerAccountingServerNotReachableRecoveredRADIUS accounting server is recovered to rechable. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.71.2.4 |