ZYXEL-PORT-SECURITY-MIB
The subtree for dhcp
Main OID:
zyxelPortSecurity.1.3.6.1.4.1.890.1.15.3.66
18
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
zyxelPortSecurityThe subtree for dhcp MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.66 |
RFC1155-SMIThe subtree for dhcp Unknown .1.3.6.1.4.1.890.1.15.3.66 |
IF-MIBThe subtree for dhcp NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.66 |
zyxelPortSecuritySetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.66.1 |
zyPortSecurityStateEnable/Disable port security on the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.66.1.1 |
zyxelPortSecurityPortTableThe table contains port security on the specified port configuration. SEQUENCE OF ZyxelPortSecurityPortEntry .1.3.6.1.4.1.890.1.15.3.66.1.2 |
zyxelPortSecurityPortEntryAn entry contains port security on the specified port configuration. ZyxelPortSecurityPortEntry .1.3.6.1.4.1.890.1.15.3.66.1.2.1 |
zyPortSecurityPortStateEnable/Disable Port Security on the specified port. Enable(1) means this port only accept frames
from static MAC addresses that are configured for the port,and dynamic MAC address frames up to the
number specified by zyxelPortSecurityPortMacLimit object.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.66.1.2.1.1 |
zyPortSecurityPortLearnStateEnable/Disable MAC address learning on the specified port. MAC address learning reduces outgoing
broadcast traffic. For MAC address learning to occur on a port, the port itself must be active with
address learning enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.66.1.2.1.2 |
zyPortSecurityPortMacLimitSet this field to limit the number of (dynamic) MAC addresses that may be learned on a port. For
example, if you set this field to 5 on port 2, then only the devices with these five learned MAC
addresses may access port 2 at any one time. A sixth device must wait until one of the five learned
MAC addresses ages out.rw INTEGER .1.3.6.1.4.1.890.1.15.3.66.1.2.1.3 |
zyPortSecurityMacFreezeThis entry is used to execute MacFreeze action to port.
It's meaningless while reading this entry.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.66.1.3 |
zyPortSecurityMaxNumberOfVMLsThe maximum number of port security VML that can be created.ro INTEGER .1.3.6.1.4.1.890.1.15.3.66.1.4 |
zyxelPortSecurityVMLTableThe table contains VLAN MAC address limit on the specified port for the specified VLAN configuration. SEQUENCE OF ZyxelPortSecurityVMLEntry .1.3.6.1.4.1.890.1.15.3.66.1.5 |
zyxelPortSecurityVMLEntryAn entry contains VLAN MAC address limit on the specified port for the specified VLAN configuration. ZyxelPortSecurityVMLEntry .1.3.6.1.4.1.890.1.15.3.66.1.5.1 |
zyPortSecurityVMLPortThe configured port number of VLAN MAC Limit. INTEGER .1.3.6.1.4.1.890.1.15.3.66.1.5.1.1 |
zyPortSecurityVMLVIDThe configured VLAN number of VLAN MAC Limit. INTEGER .1.3.6.1.4.1.890.1.15.3.66.1.5.1.2 |
zyPortSecurityVMLMacLimitSet this field to limit the number of (dynamic) MAC addresses that may be learned on a port in a
specified VLAN. For example, if you set this field to 5 on port 2 in VLAN 3, then only the devices
with these five learned MAC addresses may access port 2 in VLAN 3 at any one time. A sixth device
would have to wait until one of the five learned MAC addresses aged out.rw INTEGER .1.3.6.1.4.1.890.1.15.3.66.1.5.1.3 |
zyPortSecurityVMLRowStatusThis object allows entries to be created and deleted from the portSecurityVMLTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.66.1.5.1.4 |