ZYXEL-PORT-ISOLATION-MIB
AI MIB Summary
The ZYXEL-PORT-ISOLATION-MIB enables monitoring and configuration of Layer 2 port isolation settings on ZyXEL network switches to enforce traffic segregation between ports within the same VLAN. It exposes specific isolation status indicators and control parameters to verify that unicast, multicast, and broadcast traffic is restricted between designated isolated ports.
The subtree for port isolation
Main OID:
zyxelPortIsolation.1.3.6.1.4.1.890.1.15.3.64
8
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
8 total| Object Name |
|---|
zyxelPortIsolationThe subtree for port isolation MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.64 |
RFC1155-SMIThe subtree for port isolation Unknown .1.3.6.1.4.1.890.1.15.3.64 |
IF-MIBThe subtree for port isolation NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.64 |
zyxelPortIsolationSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.64.1 |
zyxelPortIsolationPortTableThe table contains port isolation configuration. SEQUENCE OF ZyxelPortIsolationPortEntry .1.3.6.1.4.1.890.1.15.3.64.1.1 |
zyxelPortIsolationPortEntryAn entry contains port isolation configuration. ZyxelPortIsolationPortEntry .1.3.6.1.4.1.890.1.15.3.64.1.1.1 |
zyPortIsolationPortStateEnable/Disable Port isolation on the port. Enable to allow this port to communicate only with the CPU
management port and the ports on which the isolation feature is not enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.64.1.1.1.1 |
zyPortIsolationSmartIsolationStateEnable/Disable smart Port isolation on the switch. The designated port(s) then becomes the isolated
port. Smart isolation allows you to prevent isolated ports on different switch from transmitting traffic
to each other.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.64.1.2 |