ZYXEL-POLICY-ROUTE-MIB
AI MIB Summary
The ZYXEL-POLICY-ROUTE-MIB provides SNMP access to configure and monitor policy-based routing (PBR) entries, including route map definitions, match criteria, and next-hop forwarding parameters on Zyxel network devices.
The subtree for policy route
Main OID:
zyxelPolicyRoute.1.3.6.1.4.1.890.1.15.3.60
19
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
zyxelPolicyRouteThe subtree for policy route MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.60 |
RFC1155-SMIThe subtree for policy route Unknown .1.3.6.1.4.1.890.1.15.3.60 |
IF-MIBThe subtree for policy route NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.60 |
zyxelPolicyRouteSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.60.1 |
zyPolicyRouteMaxNumberOfProfilesThe maximum number of policy route profile that can be created.ro INTEGER .1.3.6.1.4.1.890.1.15.3.60.1.1 |
zyxelPolicyRouteProfileTableThe table contains policy route profile configuration. SEQUENCE OF ZyxelPolicyRouteProfileEntry .1.3.6.1.4.1.890.1.15.3.60.1.2 |
zyxelPolicyRouteProfileEntryAn entry contains policy route profile configuration. ZyxelPolicyRouteProfileEntry .1.3.6.1.4.1.890.1.15.3.60.1.2.1 |
zyPolicyRouteProfileStateEnable/Disable this policy routing profile and rule in the profile.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.60.1.2.1.1 |
zyPolicyRouteProfileNameA descriptive name for identification policy route profile. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.60.1.2.1.2 |
zyPolicyRouteProfileRowStatusThis object allows entries to be created and deleted from the policy route profile table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.60.1.2.1.3 |
zyPolicyRouteMaxNumberOfRulesThe maximum number of policy route rule that can be created.ro INTEGER .1.3.6.1.4.1.890.1.15.3.60.1.3 |
zyxelPolicyRouteTableThe table contains policy route rule configuration. SEQUENCE OF ZyxelPolicyRouteEntry .1.3.6.1.4.1.890.1.15.3.60.1.4 |
zyxelPolicyRouteEntryAn entry contains policy route rule configuration. ZyxelPolicyRouteEntry .1.3.6.1.4.1.890.1.15.3.60.1.4.1 |
zyPolicyRouteProfileThe policy routing profile you configure. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.60.1.4.1.1 |
zyPolicyRouteSequenceThe rule number from 1 to 64. The ordering of your rules is important as rules are applied in turn. INTEGER .1.3.6.1.4.1.890.1.15.3.60.1.4.1.2 |
zyPolicyRouteStatementStatement of policy route rule.
Select Permit to forward traffic that matches this rule to the gateway specified in the rule.
Select Deny to disable the rule action and forward traffic that matches this rule according to the routing table on the switch.rw Enumeration .1.3.6.1.4.1.890.1.15.3.60.1.4.1.3 |
zyPolicyRouteCalssifierThe available active classifiers you configure, which are not used by any policy rule or policy routing rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.60.1.4.1.4 |
zyPolicyRouteNextHopNext hop IP address if the incoming packets match the criteria. 0.0.0.0 means nothing be done.rw IpAddress .1.3.6.1.4.1.890.1.15.3.60.1.4.1.5 |
zyPolicyRouteRowStatusThis object allows entries to be created and deleted from the policy route rule table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.60.1.4.1.6 |