ZYXEL-OSPF-MIB
The subtree for Open Shortest Path First (OSPF)
Main OID:
zyxelOspf.1.3.6.1.4.1.890.1.15.3.57
50
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
50 total| Object Name |
|---|
zyxelOspfThe subtree for Open Shortest Path First (OSPF) MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.57 |
RFC1155-SMIThe subtree for Open Shortest Path First (OSPF) Unknown .1.3.6.1.4.1.890.1.15.3.57 |
IF-MIBThe subtree for Open Shortest Path First (OSPF) NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.57 |
zyxelOspfSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.57.1 |
zyxelOspfIfTableThe table contains OSPF interface configuration. SEQUENCE OF ZyxelOspfIfEntry .1.3.6.1.4.1.890.1.15.3.57.1.1 |
zyxelOspfIfEntryAn entry contains OSPF interface configuration ZyxelOspfIfEntry .1.3.6.1.4.1.890.1.15.3.57.1.1.1 |
zyOspfIfKeyIdSpecify the identification number of the authentication if you want to use.rw INTEGER .1.3.6.1.4.1.890.1.15.3.57.1.1.1.1 |
zyxelOspfAreaTableThe table contains OSPF area configuration. SEQUENCE OF ZyxelOspfAreaEntry .1.3.6.1.4.1.890.1.15.3.57.1.2 |
zyxelOspfAreaEntryAn entry contains OSPF area configuration. ZyxelOspfAreaEntry .1.3.6.1.4.1.890.1.15.3.57.1.2.1 |
zyOspfAreaNameSpecify a descriptive name (up to 32 printable ASCII characters) for identification purposes.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.57.1.2.1.1 |
zyxelOspfRedistributeRouteTableThe table contains OSPF redistribute route configuration. SEQUENCE OF ZyxelOspfRedistributeRouteEntry .1.3.6.1.4.1.890.1.15.3.57.1.3 |
zyxelOspfRedistributeRouteEntryAn entry contains OSPF redistribute route configuration. ZyxelOspfRedistributeRouteEntry .1.3.6.1.4.1.890.1.15.3.57.1.3.1 |
zyOspfRedistributeRouteProtocolRoute redistribution allows your switch to import and translate external routes learned through RIP routing protocol or configured manually (Static) into the OSPF network transparently.ro Enumeration .1.3.6.1.4.1.890.1.15.3.57.1.3.1.1 |
zyOspfRedistributeRouteStateEnable/Disable the routing protocol to activate route redistribution for routes learned.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.57.1.3.1.2 |
zyOspfRedistributeRouteTypeSelect 1 for routing protocols (such as RIP) whose external metrics are directly comparable to the internal OSPF cost.
When selecting a path, the internal OSPF cost is added to the AB boundary router to the external metrics.
Select 2 for routing protocols whose external metrics are not comparable to the OSPF cost.
In this case, the external cost of the AB boundary router is used in path decision to a destination.rw INTEGER .1.3.6.1.4.1.890.1.15.3.57.1.3.1.3 |
zyOspfRedistributeRouteMetricSpecify a route cost (between 0 and 16777215).rw INTEGER .1.3.6.1.4.1.890.1.15.3.57.1.3.1.4 |
zyxelOspfVirtualLinkTableThe table contains OSPF virtual link configuration. SEQUENCE OF ZyxelOspfVirtualLinkEntry .1.3.6.1.4.1.890.1.15.3.57.1.4 |
zyxelOspfVirtualLinkEntryAn entry contains OSPF virtual link configuration. ZyxelOspfVirtualLinkEntry .1.3.6.1.4.1.890.1.15.3.57.1.4.1 |
zyOspfVirtualLinkNameSpecify a descriptive name (up to 32 printable ASCII characters) for identification purpose.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.57.1.4.1.1 |
zyOspfVirtualLinkKeyIdSpecify the identification number of the authentication you want to use.rw INTEGER .1.3.6.1.4.1.890.1.15.3.57.1.4.1.2 |
zyOspfMaxNumberOfSummaryAddressThe maximum number of summary address that can be created.ro INTEGER .1.3.6.1.4.1.890.1.15.3.57.1.5 |
zyxelOspfSummaryAddressTableThe table contains OSPF summary address configuration. SEQUENCE OF ZyxelOspfSummaryAddressEntry .1.3.6.1.4.1.890.1.15.3.57.1.6 |
zyxelOspfSummaryAddressEntryAn entry contains OSPF summary address configuration. ZyxelOspfSummaryAddressEntry .1.3.6.1.4.1.890.1.15.3.57.1.6.1 |
zyOspfSummaryAddressIpAddressSpecify a network IP address which can cover more than one network in order to reduce the routing table size.
For example, you can use 192.168.8.0/22 instead of using 192.168.8.0/24, 192.168.9.0/24, 192.168.10.0/24, and 192.168.11.0/24.
The third octet of these four network IP addresses is 00001000, 00001001, 00001010, 00001011 respectively.
The first 6 digits (000010) are the common part among these IP addresses.
So 192.168.8.0/22 can represent all of these networks. IpAddress .1.3.6.1.4.1.890.1.15.3.57.1.6.1.1 |
zyOspfSummaryAddressMaskBitsSpecify the subnet mask for this summary IP address which can cover multiple networks.ro INTEGER .1.3.6.1.4.1.890.1.15.3.57.1.6.1.2 |
zyOspfSummaryAddressRowStatusThis object allow entries to be created and deleted from the summary address table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.57.1.6.1.3 |
zyxelOspfGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.57.1.7 |
zyOspfDistanceThe administrative distance of OSPF routes.rw INTEGER .1.3.6.1.4.1.890.1.15.3.57.1.7.1 |
zyxelOspfStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.57.2 |
zyxelOspfIfInfoTableThe table contains OSPF interface information. SEQUENCE OF ZyxelOspfIfInfoEntry .1.3.6.1.4.1.890.1.15.3.57.2.1 |
zyxelOspfIfInfoEntryAn entry contains OSPF interface information. ZyxelOspfIfInfoEntry .1.3.6.1.4.1.890.1.15.3.57.2.1.1 |
zyOspfIfInfoMaskbitsThe subnet mask bits of an IP routing domain that is associated to this interface.ro INTEGER .1.3.6.1.4.1.890.1.15.3.57.2.1.1.1 |
zyOspfIfInfoDesignatedRouterIDThe IP Address of the Designated Router.ro IpAddress .1.3.6.1.4.1.890.1.15.3.57.2.1.1.2 |
zyOspfIfInfoBackupDesignatedRouterIDThe IP Address of the Backup Designated Router.ro IpAddress .1.3.6.1.4.1.890.1.15.3.57.2.1.1.3 |
zyOspfIfInfoNbrCountRegardless of state, counting all adjacent neighbors.ro INTEGER .1.3.6.1.4.1.890.1.15.3.57.2.1.1.4 |
zyOspfIfInfoAdjacentNbrCountCounting the adjacent neighbor if its state is full.ro INTEGER .1.3.6.1.4.1.890.1.15.3.57.2.1.1.5 |
zyOspfIfInfoHelloDueTimeThe interface would send hello packet when the due time is timeout.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.57.2.1.1.6 |
zyxelOspfNbrTableThe table contains OSPF neighbor information. SEQUENCE OF ZyxelOspfNbrEntry .1.3.6.1.4.1.890.1.15.3.57.2.2 |
zyxelOspfNbrEntryAn entry contains OSPF neighbor information. ZyxelOspfNbrEntry .1.3.6.1.4.1.890.1.15.3.57.2.2.1 |
zyOspfNbrRoleThis variable display the neighbor role.ro Enumeration .1.3.6.1.4.1.890.1.15.3.57.2.2.1.1 |
zyOspfNbrDeadtimeThe neighbor would be disconnect when the dead time is timeout.
The dead time would be reset when the switch receives hello packet from the neighbor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.57.2.2.1.2 |
zyOspfNbrInterfaceThe interface is connected with the neighbor.ro IpAddress .1.3.6.1.4.1.890.1.15.3.57.2.2.1.3 |
zyOspfNbrRetransmitLSAThe list of LSAs that have been flooded but not acknowledged on this adjacency.
These will be retransmitted at intervals until they are acknowledged, or until the adjacency is destroyed.ro INTEGER .1.3.6.1.4.1.890.1.15.3.57.2.2.1.4 |
zyOspfNbrRequestLSAThe list of LSAs that need to be received from this neighbor in order to synchronize the
two neighbors link-state databases. This list is created as Database Description packets
are received, and is then sent to the neighbor in Link State Request packets. The list
is depleted as appropriate Link State Update packets are received.ro INTEGER .1.3.6.1.4.1.890.1.15.3.57.2.2.1.5 |
zyOspfNbrDatabaseSummaryLSAThe complete list of LSAs that make up the area link-state database,
at the moment the neighbor goes into Database Exchange state. This list is sent to
the neighbor in DatabaseDescription packets.ro INTEGER .1.3.6.1.4.1.890.1.15.3.57.2.2.1.6 |
zyxelOspfLsdbTableThe table contains OSPF link state database information. SEQUENCE OF ZyxelOspfLsdbEntry .1.3.6.1.4.1.890.1.15.3.57.2.3 |
zyxelOspfLsdbEntryAn entry contains OSPF link state database information. ZyxelOspfLsdbEntry .1.3.6.1.4.1.890.1.15.3.57.2.3.1 |
zyOspfLsdbLinkCountDisplay how many link in this Link State Database.ro INTEGER .1.3.6.1.4.1.890.1.15.3.57.2.3.1.1 |
zyOspfLsdbRouteIpAddressDisplay the ip address of routing domain in this Link State Database.ro IpAddress .1.3.6.1.4.1.890.1.15.3.57.2.3.1.2 |
zyOspfLsdbRouteMaskBitsDisplay the mask bits of routing domain in this Link State Database.ro INTEGER .1.3.6.1.4.1.890.1.15.3.57.2.3.1.3 |