ZYXEL-MULTICAST-MIB
AI MIB Summary
The ZYXEL-MULTICAST-MIB enables monitoring and management of IPv4 and IPv6 multicast forwarding states, group memberships, and interface statistics on ZyXEL network devices. It provides visibility into active multicast sessions, IGMP/MLD group counts, and packet forwarding counters to validate multicast routing integrity.
The subtree for multicast
Main OID:
zyxelMulticast.1.3.6.1.4.1.890.1.15.3.54
6
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
6 total| Object Name |
|---|
zyxelMulticastThe subtree for multicast MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.54 |
RFC1155-SMIThe subtree for multicast Unknown .1.3.6.1.4.1.890.1.15.3.54 |
IF-MIBThe subtree for multicast NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.3.54 |
zyxelMulticastSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.54.1 |
zyMulticastUnknownMulticastFrameForwardingSpecify the action to perform when the switch receives an unknown multicast frame. Unknown multicast
frames are addressed to multicast groups for which the Switch has not recorded any group members.
Select Drop to discard the frame(s). Select Flooding to send the frame(s) to all ports of the same
domain.rw Enumeration .1.3.6.1.4.1.890.1.15.3.54.1.1 |
zyMulticastReservedMulticastFrameForwardingThe IP address range of 224.0.0.0 to 224.0.0.255 are reserved for multicasting on the local
network only. For example, 224.0.0.1 is for all hosts on a local network segment and 224.0.0.9 is
used to send RIP routing information to all RIP v2 routers on the same network segment. A multicast
router will not forward a packet with the destination IP address within this range to other networks.
See the IANA web site for more information.
The layer-2 multicast MAC addresses are also included in this group.
Specify the action to perform when the Switch receives a frame with a reserved multicast address.
Select Drop to discard the frame(s). Select Flooding to send the frame(s) to all ports of the same domain.rw Enumeration .1.3.6.1.4.1.890.1.15.3.54.1.2 |