ZYXEL-MES3500-24F-MIB
Fault event table definitions
Main OID:
faultMIB.1.3.6.1.4.1.890.1.5.8.57.26
963
Objects
Active
Status
12
Dependencies
Imported Objects
Objects
963 total| Object Name |
|---|
zyxel OBJECT IDENTIFIER .1.3.6.1.4.1.890 |
RFC1155-SMI Unknown .1.3.6.1.4.1.890 |
IF-MIB NOTIFICATION-TYPE .1.3.6.1.4.1.890 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.890.1 |
accessSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5 |
esSeries OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8 |
mes3500-24f OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57 |
sysInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.1 |
sysSwPlatformMajorVersSW platform major version, e.g. 3.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.1.1 |
sysSwPlatformMinorVersSW platform minor version, e.g. 50.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.1.2 |
sysSwModelStringModel letters, e.g. TJro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.1.3 |
sysSwVersionControlNbrVersion control number, e.g. 0.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.1.4 |
sysSwDaySW compilation day, e.g. 19.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.1.5 |
sysSwMonthSW compilation month, e.g. 8.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.1.6 |
sysSwYearSW compilation year, e.g. 2008.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.1.7 |
sysHwMajorVersHW major version number, e.g. 1.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.1.8 |
sysHwMinorVersHW minor version number, e.g. 0.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.1.9 |
sysSerialNumberSerial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.1.10 |
sysSwBootUpImageCurrent system boot up image,
You can change the boot up image of next rebooting by setting sysMgmtBootupImage.ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.1.11 |
rateLimitSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.2 |
rateLimitStateIngress/egress rate limiting enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.2.1 |
rateLimitPortTable SEQUENCE OF RateLimitPortEntry .1.3.6.1.4.1.890.1.5.8.57.2.2 |
rateLimitPortEntryAn entry in rateLimitPortTable. RateLimitPortEntry .1.3.6.1.4.1.890.1.5.8.57.2.2.1 |
rateLimitPortStateIngress/egress rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.2.2.1.1 |
rateLimitPortCommitRateCommit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.2.2.1.2 |
rateLimitPortPeakRatePeak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.2.2.1.3 |
rateLimitPortEgrRateEgress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.2.2.1.4 |
rateLimitPortPeakStateIngress peak rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.2.2.1.5 |
rateLimitPortEgrStateEgress rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.2.2.1.6 |
rateLimitPortCommitStateIngress commit rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.2.2.1.7 |
brLimitSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.3 |
brLimitStateBroadcast/multicast/DLF rate limiting enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.3.1 |
brLimitPortTable SEQUENCE OF BrLimitPortEntry .1.3.6.1.4.1.890.1.5.8.57.3.2 |
brLimitPortEntryAn entry in brLimitPortTable. BrLimitPortEntry .1.3.6.1.4.1.890.1.5.8.57.3.2.1 |
brLimitPortBrStateBroadcast rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.3.2.1.1 |
brLimitPortBrRateAllowed broadcast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.3.2.1.2 |
brLimitPortMcStateMulticast rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.3.2.1.3 |
brLimitPortMcRateAAllowed mullticast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.3.2.1.4 |
brLimitPortDlfStateDestination lookup failure frames rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.3.2.1.5 |
brLimitPortDlfRateAllowed destination lookup failure frames rate in pkts/s.
For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.3.2.1.6 |
portSecuritySetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.4 |
portSecurityStatePort Security enabled/disabled on the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.4.1 |
portSecurityPortTable SEQUENCE OF PortSecurityPortEntry .1.3.6.1.4.1.890.1.5.8.57.4.2 |
portSecurityPortEntryAn entry in portSecurityPortTable. PortSecurityPortEntry .1.3.6.1.4.1.890.1.5.8.57.4.2.1 |
portSecurityPortStatePort Security enabled/disabled on the port.
Active(1) means this port only accept frames from static MAC addresses that are configured for the port,
and dynamic MAC address frames up to the number specified by portSecurityPortCount object.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.4.2.1.1 |
portSecurityPortLearnStateMAC address learning enabled/disable on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.4.2.1.2 |
portSecurityPortCountNumber of (dynamic) MAC addresses that may be learned on the port.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.4.2.1.3 |
portSecurityMacFreezeThis entry is used to execute MacFreeze action to port.
It's meaningless while reading this entry.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.4.3 |
vlanTrunkSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.5 |
vlanTrunkPortTable SEQUENCE OF VlanTrunkPortEntry .1.3.6.1.4.1.890.1.5.8.57.5.1 |
vlanTrunkPortEntryAn entry in vlanTrunkPortTable. VlanTrunkPortEntry .1.3.6.1.4.1.890.1.5.8.57.5.1.1 |
vlanTrunkPortStateVlanTrunking enabled/disabled on the port.
Active(1) to allow frames belonging to unknown
VLAN groups to pass through the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.5.1.1.1 |
vlanStackSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.7 |
vlanStackStateVLAN Stacking enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.7.1 |
vlanStackPortTable SEQUENCE OF VlanStackPortEntry .1.3.6.1.4.1.890.1.5.8.57.7.3 |
vlanStackPortEntryAn entry in vlanStackPortTable. VlanStackPortEntry .1.3.6.1.4.1.890.1.5.8.57.7.3.1 |
vlanStackPortModeMode of the port. Set Normal to have the switch ignore frames received
(or transmitted) on this port with VLAN stacking tags.
Anything you configure in SPVID and Priority are ignored.
Set Access mode to have the switch add the SP TPID tag to all incoming
frames received on this port. Set Access mode for ingress ports at the
edge of the service provider's network. Set Tunnel mode (available for
Gigabit ports only) for egress ports at the edge of the service provider's
network. In order to support VLAN stacking on a port, the port must be able
to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag)
to pass through it. normal (1), Access (2), tunnel (3)rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.7.3.1.1 |
vlanStackPortVidVLAN ID used in service provider tag.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.7.3.1.2 |
vlanStackPortPrioPriority value for service provider tag.
0 is the lowest priority level and 7 is the highest.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.7.3.1.3 |
vlanStackTunnelPortTpidTunnel Port TPID in hex format, e.g. 8100.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.7.3.1.4 |
selectiveQinQTable SEQUENCE OF SelectiveQinQEntry .1.3.6.1.4.1.890.1.5.8.57.7.4 |
selectiveQinQEntryAn entry in selective qinq table SelectiveQinQEntry .1.3.6.1.4.1.890.1.5.8.57.7.4.1 |
selectiveQinQNameThe name of selective qinq entryrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.7.4.1.1 |
selectiveQinQPortinterface port idro INTEGER .1.3.6.1.4.1.890.1.5.8.57.7.4.1.2 |
selectiveQinQCvidinner vidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.7.4.1.3 |
selectiveQinQSpvidouter vidrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.7.4.1.4 |
selectiveQinQPrioritypriorityrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.7.4.1.5 |
selectiveQinQRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.7.4.1.6 |
dot1xSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.8 |
portAuthState802.1x port authentication enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.8.3 |
portAuthTable SEQUENCE OF PortAuthEntry .1.3.6.1.4.1.890.1.5.8.57.8.4 |
portAuthEntryAn entry in portAuthTable. PortAuthEntry .1.3.6.1.4.1.890.1.5.8.57.8.4.1 |
portAuthEntryState802.1x port authentication enabled or disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.8.4.1.1 |
portReAuthEntryState802.1x port re-authentication enabled or disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.8.4.1.2 |
portReAuthEntryTimerRe-authentication timer in seconds.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.8.4.1.3 |
portAuthQuietPeriodQuiet period in seconds.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.8.4.1.4 |
portAuthTxPeriodTx period in seconds.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.8.4.1.5 |
portAuthSupplicantTimeoutSupplicant Timeout in seconds.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.8.4.1.6 |
portAuthMaxRequestMax request.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.8.4.1.7 |
portAuthGuestVlanStateGuest Vlan State.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.8.4.1.8 |
portAuthGuestVlanGuest Vlan ID.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.8.4.1.9 |
portAuthGuestVlanHostModeGuest Vlan Host Mode.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.8.4.1.10 |
portAuthGuestVlanHostModeMultiSecureNumberGuest Vlan Host Mode Multi-Secure number.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.8.4.1.11 |
hwMonitorInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.9 |
tempTable SEQUENCE OF TempEntry .1.3.6.1.4.1.890.1.5.8.57.9.2 |
tempEntryAn entry in tempTable. TempEntry .1.3.6.1.4.1.890.1.5.8.57.9.2.1 |
tempIndexIndex of temperature unit. 1:MAC, 2:CPU, 3:PHYro Enumeration .1.3.6.1.4.1.890.1.5.8.57.9.2.1.1 |
tempCurValueThe current temperature measured at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.9.2.1.2 |
tempMaxValueThe maximum temperature measured at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.9.2.1.3 |
tempMinValueThe minimum temperature measured at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.9.2.1.4 |
tempHighThreshThe upper temperature limit at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.9.2.1.5 |
tempDescr'Normal' indicates temperatures below the threshold and 'Error' for those above.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.9.2.1.6 |
voltageTable SEQUENCE OF VoltageEntry .1.3.6.1.4.1.890.1.5.8.57.9.3 |
voltageEntryAn entry in voltageTable. VoltageEntry .1.3.6.1.4.1.890.1.5.8.57.9.3.1 |
voltageIndexIndex of voltage.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.9.3.1.1 |
voltageCurValueThe current voltage reading.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.9.3.1.2 |
voltageMaxValueThe maximum voltage measured at this point.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.9.3.1.3 |
voltageMinValueThe minimum voltage measured at this point.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.9.3.1.4 |
voltageNominalValueThe normal voltage at wchich the switch work.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.9.3.1.5 |
voltageLowThreshThe minimum voltage at which the switch should work.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.9.3.1.6 |
voltageDescr'Normal' indicates that the voltage is within an acceptable operating range
at this point; otherwise 'Error' is displayed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.9.3.1.7 |
snmpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.10 |
snmpGetCommunityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.10.1 |
snmpSetCommunityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.10.2 |
snmpTrapCommunityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.10.3 |
snmpTrapDestTable SEQUENCE OF SnmpTrapDestEntry .1.3.6.1.4.1.890.1.5.8.57.10.4 |
snmpTrapDestEntryAn entry in snmpTrapDestTable. SnmpTrapDestEntry .1.3.6.1.4.1.890.1.5.8.57.10.4.1 |
snmpTrapDestIPIP address of trap destination.ro IpAddress .1.3.6.1.4.1.890.1.5.8.57.10.4.1.1 |
snmpTrapDestRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.10.4.1.2 |
snmpTrapDestPortThe UDP port of the trap destination.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.10.4.1.3 |
snmpTrapVersionThe SNMP protocol version to send traps.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.10.4.1.4 |
snmpTrapUserNameThe user name for sending SNMPv3 traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.10.4.1.5 |
snmpVersionThe SNMP version to be used. v3v2c means that the manager
can get/set by SNMPv3 and can get by SNMPv2c.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.10.5 |
snmpUserTableA table that contains SNMPv3 user information. SEQUENCE OF SnmpUserEntry .1.3.6.1.4.1.890.1.5.8.57.10.6 |
snmpUserEntryAn entry of snmpUserTable. SnmpUserEntry .1.3.6.1.4.1.890.1.5.8.57.10.6.1 |
snmpUserNameThe user name. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.10.6.1.1 |
snmpUserSecurityLevelThe level of security at which SNMP messages can be sent or
with which operations are being processed.ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.10.6.1.2 |
snmpUserAuthProtocolThe type of authentication protocol to be used.ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.10.6.1.3 |
snmpUserPrivProtocolThe type of privacy protocol to be used.ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.10.6.1.4 |
snmpUserGroupThe group name which this user belongs to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.10.6.1.5 |
snmpTrapGroupTable SEQUENCE OF SnmpTrapGroupEntry .1.3.6.1.4.1.890.1.5.8.57.10.7 |
snmpTrapGroupEntryAn entry in snmpTrapGroupTable. SnmpTrapGroupEntry .1.3.6.1.4.1.890.1.5.8.57.10.7.1 |
snmpTrapSystemGrouprw Bits .1.3.6.1.4.1.890.1.5.8.57.10.7.1.1 |
snmpTrapInterfaceGrouprw Bits .1.3.6.1.4.1.890.1.5.8.57.10.7.1.2 |
snmpTrapAAAGrouprw Bits .1.3.6.1.4.1.890.1.5.8.57.10.7.1.3 |
snmpTrapIPGrouprw Bits .1.3.6.1.4.1.890.1.5.8.57.10.7.1.4 |
snmpTrapSwitchGrouprw Bits .1.3.6.1.4.1.890.1.5.8.57.10.7.1.5 |
dateTimeSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.11 |
dateTimeServerTypeThe time service protocol.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.11.1 |
dateTimeServerIPIP address of time server.rw IpAddress .1.3.6.1.4.1.890.1.5.8.57.11.2 |
dateTimeZoneThe time difference between UTC. Ex: +01rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.11.3 |
dateTimeNewDateYearThe new date in year.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.11.4 |
dateTimeNewDateMonthThe new date in month.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.11.5 |
dateTimeNewDateDayThe new date in day.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.11.6 |
dateTimeNewTimeHourThe new time in hour.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.11.7 |
dateTimeNewTimeMinuteThe new time in minute.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.11.8 |
dateTimeNewTimeSecondThe new time in second.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.11.9 |
dateTimeDaylightSavingTimeSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.11.10 |
daylightSavingTimeStateDaylight saving time service enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.11.10.1 |
daylightSavingTimeStartDateWeekDaylight saving time service start week.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.11.10.2 |
daylightSavingTimeStartDateDayDaylight saving time service start day.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.11.10.3 |
daylightSavingTimeStartDateMonthDaylight saving time service start month.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.11.10.4 |
daylightSavingTimeStartDateHourDaylight saving time service start time.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.11.10.5 |
daylightSavingTimeEndDateWeekDaylight saving time service end week.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.11.10.6 |
daylightSavingTimeEndDateDayDaylight saving time service end day.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.11.10.7 |
daylightSavingTimeEndDateMonthDaylight saving time service end month.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.11.10.8 |
daylightSavingTimeEndDateHourDaylight saving time service end time.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.11.10.9 |
sysMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.12 |
sysMgmtConfigSaveIf setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file.
If not, running-config will be written to the booting one.
Note: This action can access all configuration includes user account and AA configuration.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.1 |
sysMgmtBootupConfigThe setting value (read index) will be written into non-volatile memory.
While rebooting, the variable write index is equal to read index initially.
You can change the value of write index by CLI / MIB.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.2 |
sysMgmtRebootReboot switch from SNMP. 1:Reboot, 0:Nothingrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.3 |
sysMgmtDefaultConfigErase running config and reset to default.
Note: This action can access all configuration includes user account and AA configuration.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.4 |
sysMgmtLastActionStatusDisplay status of last mgmt action.ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.5 |
sysMgmtSystemStatusThis variable indicates the status of the system.
The sysMgmtAlarmStatus is a bit map represented
a sum, therefore, it can represent multiple defects
simultaneously. The sysNoDefect should be set if and only if
no other flag is set.
The various bit positions are:
0 sysAlarmDetected
1 sysTemperatureError
2 sysFanRPMError
3 sysVoltageRangeErrorro Bits .1.3.6.1.4.1.890.1.5.8.57.12.6 |
sysMgmtCPUUsageShow device CPU load in %, it's the snapshot of CPU load when
getting the values.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.12.7 |
sysMgmtBootupImageThe setting value (read index) will be written into non-volatile memory.
When rebooting, the selected image will be used.
You can change the value of write index by CLI / MIB.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.8 |
sysMgmtCounterResetReset all port counters.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.9 |
sysMgmtTftpServiceSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.12.10 |
sysMgmtTftpServerIpIP address of TFTP serverrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.12.10.1 |
sysMgmtTftpRemoteFileNameThe file name that you want to backup to or restore from TFTP serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.12.10.2 |
sysMgmtTftpConfigIndexIndex of system configuration which you want to restore.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.10.3 |
sysMgmtTftpActionAction of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server, 3: Merge config from tftp server.
Note: This action can access all configuration includes user account and AA configuration.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.10.4 |
sysMgmtTftpActionStatusDisplay status of mgmt action.ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.10.5 |
sysMgmtTftpActionPrivilege13Action of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server, 3: Merge config from tftp server.
Note: This action can access configuration with privilege 13.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.10.113 |
sysMgmtConfigSavePrivilege13If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file.
If not, running-config will be written to the booting one.
Note: This action can access configuration with privilege 13.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.113 |
sysMgmtDefaultConfigPrivilege13Erase running config and reset to default.
Note: This action can access configuration with privilege 13.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.12.213 |
layer2Setup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.13 |
vlanTypeSetuprw Enumeration .1.3.6.1.4.1.890.1.5.8.57.13.1 |
igmpSnoopingStateSetuprw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.13.2 |
tagVlanPortIsolationStateThis setting will also show the result in the portIsolationStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.13.3 |
stpStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.13.4 |
igmpFilteringStateSetuprw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.13.6 |
unknownMulticastFrameForwardingrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.13.7 |
multicastGrpHostTimeoutSpecify host timeout for all multicast groups when the specific port is in auto mode.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.13.8 |
reservedMulticastFrameForwardingrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.13.9 |
igmpsnp8021pPrioritySet the 802.1p priority of control messages for igmp-snooping(0~8, 8-No Change)rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.13.10 |
igmpsnpVlanModerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.13.11 |
stpModerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.13.12 |
igmpsnpVlanTable SEQUENCE OF IgmpsnpVlanEntry .1.3.6.1.4.1.890.1.5.8.57.13.13 |
igmpsnpVlanEntryAn entry in IgmpsnpVlanTable. IgmpsnpVlanEntry .1.3.6.1.4.1.890.1.5.8.57.13.13.1 |
igmpsnpVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.13.13.1.1 |
igmpsnpVlanNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.13.13.1.2 |
igmpsnpVlanRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.13.13.1.3 |
igmpsnpQuerierModerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.13.14 |
ethernetCfmStateSetuprw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.13.15 |
lldpStateSetuprw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.13.16 |
igmpSnpReportProxySetupIGMP Snooping report-proxy moderw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.13.17 |
smartIsolationStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.13.18 |
ipSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.14 |
dnsIpAddressrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.14.1 |
inbandIpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.14.3 |
inbandIpTyperw Enumeration .1.3.6.1.4.1.890.1.5.8.57.14.3.1 |
inbandVidrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.14.3.2 |
inbandStaticIprw IpAddress .1.3.6.1.4.1.890.1.5.8.57.14.3.3 |
inbandStaticSubnetMaskrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.14.3.4 |
inbandStaticGatewayrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.14.3.5 |
maxNumOfInbandIpro INTEGER .1.3.6.1.4.1.890.1.5.8.57.14.4 |
inbandIpTable SEQUENCE OF InbandIpEntry .1.3.6.1.4.1.890.1.5.8.57.14.5 |
inbandIpEntryAn entry in inbandIpTable. InbandIpEntry .1.3.6.1.4.1.890.1.5.8.57.14.5.1 |
inbandEntryIpro IpAddress .1.3.6.1.4.1.890.1.5.8.57.14.5.1.1 |
inbandEntrySubnetMaskrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.14.5.1.2 |
inbandEntryGatewayrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.14.5.1.3 |
inbandEntryVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.14.5.1.4 |
inbandEntryManageablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.14.5.1.5 |
inbandEntryRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.14.5.1.6 |
filterSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.15 |
filterTable SEQUENCE OF FilterEntry .1.3.6.1.4.1.890.1.5.8.57.15.1 |
filterEntryAn entry in filterTable. FilterEntry .1.3.6.1.4.1.890.1.5.8.57.15.1.1 |
filterNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.15.1.1.1 |
filterActionStaterw Enumeration .1.3.6.1.4.1.890.1.5.8.57.15.1.1.2 |
filterMacAddrro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.15.1.1.3 |
filterVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.15.1.1.4 |
filterRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.15.1.1.5 |
mirrorSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.16 |
mirrorStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.16.1 |
mirrorMonitorPortrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.16.2 |
mirrorTable SEQUENCE OF MirrorEntry .1.3.6.1.4.1.890.1.5.8.57.16.3 |
mirrorEntryAn entry in mirrorTable. MirrorEntry .1.3.6.1.4.1.890.1.5.8.57.16.3.1 |
mirrorMirroredStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.16.3.1.1 |
mirrorDirectionrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.16.3.1.2 |
aggrSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.17 |
aggrStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.17.1 |
aggrSystemPriorityrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.17.2 |
aggrGroupTable SEQUENCE OF AggrGroupEntry .1.3.6.1.4.1.890.1.5.8.57.17.3 |
aggrGroupEntryAn entry in aggrGroupTable. AggrGroupEntry .1.3.6.1.4.1.890.1.5.8.57.17.3.1 |
aggrGroupIndexro INTEGER .1.3.6.1.4.1.890.1.5.8.57.17.3.1.1 |
aggrGroupStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.17.3.1.2 |
aggrGroupDynamicStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.17.3.1.3 |
aggrGroupCriteriarw Enumeration .1.3.6.1.4.1.890.1.5.8.57.17.3.1.4 |
aggrPortTable SEQUENCE OF AggrPortEntry .1.3.6.1.4.1.890.1.5.8.57.17.4 |
aggrPortEntryAn entry in aggrPortTable. AggrPortEntry .1.3.6.1.4.1.890.1.5.8.57.17.4.1 |
aggrPortGrouprw Enumeration .1.3.6.1.4.1.890.1.5.8.57.17.4.1.1 |
aggrPortDynamicStateTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.17.4.1.2 |
accessCtlSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.18 |
accessCtlTable SEQUENCE OF AccessCtlEntry .1.3.6.1.4.1.890.1.5.8.57.18.1 |
accessCtlEntryAn entry in accessCtlTable. AccessCtlEntry .1.3.6.1.4.1.890.1.5.8.57.18.1.1 |
accessCtlServicero Enumeration .1.3.6.1.4.1.890.1.5.8.57.18.1.1.1 |
accessCtlEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.18.1.1.2 |
accessCtlServicePortrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.18.1.1.3 |
accessCtlTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.18.1.1.4 |
securedClientTable SEQUENCE OF SecuredClientEntry .1.3.6.1.4.1.890.1.5.8.57.18.2 |
securedClientEntryAn entry in securedClientTable. SecuredClientEntry .1.3.6.1.4.1.890.1.5.8.57.18.2.1 |
securedClientIndexro INTEGER .1.3.6.1.4.1.890.1.5.8.57.18.2.1.1 |
securedClientEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.18.2.1.2 |
securedClientStartIprw IpAddress .1.3.6.1.4.1.890.1.5.8.57.18.2.1.3 |
securedClientEndIprw IpAddress .1.3.6.1.4.1.890.1.5.8.57.18.2.1.4 |
securedClientServicerw Bits .1.3.6.1.4.1.890.1.5.8.57.18.2.1.5 |
queuingMethodSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.19 |
portQueuingMethodTable SEQUENCE OF PortQueuingMethodEntry .1.3.6.1.4.1.890.1.5.8.57.19.1 |
portQueuingMethodEntryAn entry in portQueuingMethodTable. PortQueuingMethodEntry .1.3.6.1.4.1.890.1.5.8.57.19.1.1 |
portQueuingMethodQueue0...7ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.19.1.1.1 |
portQueuingMethodWeight0...15rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.19.1.1.2 |
portQueuingMethodModerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.19.1.1.3 |
portQueuingMethodHybridSpqTable SEQUENCE OF PortQueuingMethodHybridSpqEntry .1.3.6.1.4.1.890.1.5.8.57.19.2 |
portQueuingMethodHybridSpqEntryAn entry in portQueuingMethodTable. PortQueuingMethodHybridSpqEntry .1.3.6.1.4.1.890.1.5.8.57.19.2.1 |
portQueuingMethodHybridSpqrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.19.2.1.1 |
dhcpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.20 |
globalDhcpRelay OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.20.1 |
globalDhcpRelayEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.20.1.1 |
globalDhcpRelayOption82Enablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.20.1.2 |
globalDhcpRelayInfoEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.20.1.3 |
globalDhcpRelayInfoDataro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.20.1.4 |
maxNumberOfGlobalDhcpRelayRemoteServerro INTEGER .1.3.6.1.4.1.890.1.5.8.57.20.1.5 |
globalDhcpRelayRemoteServerTable SEQUENCE OF GlobalDhcpRelayRemoteServerEntry .1.3.6.1.4.1.890.1.5.8.57.20.1.6 |
globalDhcpRelayRemoteServerEntryAn entry in globalDhcpRelayRemoteServerTable. GlobalDhcpRelayRemoteServerEntry .1.3.6.1.4.1.890.1.5.8.57.20.1.6.1 |
globalDhcpRelayRemoteServerIpro IpAddress .1.3.6.1.4.1.890.1.5.8.57.20.1.6.1.1 |
globalDhcpRelayRemoteServerRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.20.1.6.1.2 |
dhcpRelay OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.20.2 |
dhcpRelayInfoDataro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.20.2.1 |
maxNumberOfDhcpRelayThe maximum number of DHCP relay entries that can be created.
A value of 0 for this object implies that there exists settings for
global DHCP relay.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.20.2.2 |
maxNumberOfDhcpRelayRemoteServerro INTEGER .1.3.6.1.4.1.890.1.5.8.57.20.2.3 |
dhcpRelayTable SEQUENCE OF DhcpRelayEntry .1.3.6.1.4.1.890.1.5.8.57.20.2.4 |
dhcpRelayEntryAn entry in dhcpRelayTable. DhcpRelayEntry .1.3.6.1.4.1.890.1.5.8.57.20.2.4.1 |
dhcpRelayOption82Enablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.20.2.4.1.1 |
dhcpRelayInfoEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.20.2.4.1.2 |
dhcpRelayRemoteServerTable SEQUENCE OF DhcpRelayRemoteServerEntry .1.3.6.1.4.1.890.1.5.8.57.20.2.5 |
dhcpRelayRemoteServerEntryAn entry in dhcpRelayRemoteServerTable. DhcpRelayRemoteServerEntry .1.3.6.1.4.1.890.1.5.8.57.20.2.5.1 |
dhcpRelayVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.20.2.5.1.1 |
dhcpRelayRemoteServerIpro IpAddress .1.3.6.1.4.1.890.1.5.8.57.20.2.5.1.2 |
dhcpRelayRemoteServerRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.20.2.5.1.3 |
staticRouteSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.21 |
maxNumberOfStaticRoutesro INTEGER .1.3.6.1.4.1.890.1.5.8.57.21.1 |
staticRouteTable SEQUENCE OF StaticRouteEntry .1.3.6.1.4.1.890.1.5.8.57.21.2 |
staticRouteEntryAn entry in staticRouteTable. StaticRouteEntry .1.3.6.1.4.1.890.1.5.8.57.21.2.1 |
staticRouteNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.21.2.1.1 |
staticRouteIpro IpAddress .1.3.6.1.4.1.890.1.5.8.57.21.2.1.2 |
staticRouteMaskro IpAddress .1.3.6.1.4.1.890.1.5.8.57.21.2.1.3 |
staticRouteGatewayrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.21.2.1.4 |
staticRouteMetricrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.21.2.1.5 |
staticRouteRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.21.2.1.6 |
arpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.22 |
arpTable SEQUENCE OF ArpEntry .1.3.6.1.4.1.890.1.5.8.57.22.1 |
arpEntryAn entry in arpTable. ArpEntry .1.3.6.1.4.1.890.1.5.8.57.22.1.1 |
arpIndexro INTEGER .1.3.6.1.4.1.890.1.5.8.57.22.1.1.1 |
arpIpAddrro IpAddress .1.3.6.1.4.1.890.1.5.8.57.22.1.1.2 |
arpMacAddrro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.22.1.1.3 |
arpMacVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.22.1.1.4 |
arpType1-static, 2-dynamicro Enumeration .1.3.6.1.4.1.890.1.5.8.57.22.1.1.5 |
portOpModeSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.24 |
portOpModePortTable SEQUENCE OF PortOpModePortEntry .1.3.6.1.4.1.890.1.5.8.57.24.1 |
portOpModePortEntryAn entry in portOpModePortTable. PortOpModePortEntry .1.3.6.1.4.1.890.1.5.8.57.24.1.1 |
portOpModePortSpeedDuplexrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.24.1.1.1 |
portOpModePortFlowCntlrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.24.1.1.2 |
portOpModePortNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.24.1.1.3 |
portOpModePortModuleTypero Enumeration .1.3.6.1.4.1.890.1.5.8.57.24.1.1.4 |
portOpModePortLinkUpTypero Enumeration .1.3.6.1.4.1.890.1.5.8.57.24.1.1.5 |
portOpModePortIntrusionLockrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.24.1.1.6 |
portOpModePortLBTestStatusThis entry display latest loopback test status of port while performing loopback test.ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.24.1.1.7 |
portOpModePortCounterResetThis entry resets port counter.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.24.1.1.8 |
portBasedVlanSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.25 |
portBasedVlanPortListTable SEQUENCE OF PortBasedVlanPortListEntry .1.3.6.1.4.1.890.1.5.8.57.25.1 |
portBasedVlanPortListEntryAn entry in portBasedVlanPortListTable. PortBasedVlanPortListEntry .1.3.6.1.4.1.890.1.5.8.57.25.1.1 |
portBasedVlanPortListMembersrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.25.1.1.1 |
faultMIBFault event table definitions MODULE-IDENTITY .1.3.6.1.4.1.890.1.5.8.57.26 |
eventObjects OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.26.1 |
eventTableA list of currently active fault events. All faults
of normal type regardless of their severity level
are recorded in the event table. When a normal
type fault is cleared it is deleted from the event
table. SEQUENCE OF EventEntry .1.3.6.1.4.1.890.1.5.8.57.26.1.1 |
eventEntryAn entry containing information about an
event in the event table. EventEntry .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1 |
eventSeqNumThis variable represents the sequence number of an event.
Sequence number is incremented monotonically starting
from 0 until it reaches its maximum and wraps around back
to 0.
Sequence number is incremented when
- the state of a normal type fault is set on (the same sequence
number is present in the events table as well as in the trap
that is sent to notify about the fault on event)
- delta event occurs (sequence number present in trap message)
- the state of a normal type fault is set off (sequence number
present in trap that is sent to notify for clearing).ro Integer32 .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1.1 |
eventEventIdThis variable represents the event ID which uniquely
identifies the event in the entire system.ro EventIdNumber .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1.2 |
eventNameThis variable represents the name of the event, for
example 'Ethernet Link Down'ro DisplayString .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1.3 |
eventInstanceTypeThis variable represents the type of InstanceId of a
particular event in the event table. In brief
the instanceType refers to the type of sub-component
generating this event in the system, for example
switch (5). For more details see the textual
conventions section.
AFFECTS: eventInstanceId,
eventInstanceNamero InstanceType .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1.4 |
eventInstanceIdThis variable represents the InstanceId of a particular
event in the event current table. In brief the instanceId
refers to the sub-component generating this event in the
system, for example '1' for port 1. For more details see
the textual conventions section.
DEPENDS ON: eventInstanceTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1.5 |
eventInstanceNameThis variable is mainly used to store additional information
about the sub-component that is generating an event. For
example this field may specify what cooling fan is faulty.
DEPENDS ON: eventInstanceTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1.6 |
eventSeverityThis variable dictates the urgency of action when a event
occurs. There are four severity levels - Critical, Major,
Minor, and Informational. Critical events are those, which
require immediate operator intervention to prevent/reduce
system down time. Major events require quick attention and
Minor events possibly require some attention. Informational
events indicate the occurrence of events that may need to be
investigated.ro EventSeverity .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1.7 |
eventSetTimeThis table contains only normal events and this variable
represents the time when the event become active, i.e. the
number of seconds since Jan 1, 1970 12:00AM.ro UtcTimeStamp .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1.8 |
eventDescriptionThis variable contains a description of the event and reasons
behind the event. This is a free format alpha-numeric string
that is set by the entity generating this event. This variable
may be empty if there is no usefull information to report.
The maximum length of this string is 255 characters.ro DisplayString .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1.9 |
eventServAffectiveThis variable indicates whether the event is service affective or notro EventServiceAffective .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1.10 |
eventInstanceIdNumberThis variable represents the InstanceId of a particular
event in the event current table. In brief the instanceId
refers to the sub-component generating this event in the
system, for example '1' for port 1. For more details see
the textual conventions section.
DEPENDS ON: eventInstanceTypero Integer32 .1.3.6.1.4.1.890.1.5.8.57.26.1.1.1.11 |
faultTrapsMIBFault event trap definitions MODULE-IDENTITY .1.3.6.1.4.1.890.1.5.8.57.27 |
trapInfoObjects OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.27.1 |
trapRefSeqNumIndicates the former sequence number of a cleared event
in the event table. Not intended to read but only used in
trap notifications.ro Integer32 .1.3.6.1.4.1.890.1.5.8.57.27.1.1 |
trapPersistenceIndicates whether the event is delta (automatically and
immediately cleared) or normal (not automatically cleared).
Not intended to read but only used in trap notifications.ro EventPersistence .1.3.6.1.4.1.890.1.5.8.57.27.1.2 |
trapSenderNodeIdRepresents the node ID of the sending network element. If not
supported should be set to 0. Not intended to read but only
used in trap notifications.ro Integer32 .1.3.6.1.4.1.890.1.5.8.57.27.1.3 |
trapSenderStatusRepresents the trap status. 0 means cleared, 1 means happened.ro Integer32 .1.3.6.1.4.1.890.1.5.8.57.27.1.4 |
trapNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.27.2 |
eventOnTrapThis trap is used to inform network management system that a delta
fault event (events that are automatically cleared) has occured
or a normal fault event (not automatically cleared) state has
been set on.
Objects are used as follows:
- eventSeqNum is the sequence number of the event. For normal
type of events must equal to the sequence number of the event
in the events table.
- eventEventId specifies what fault event has occured.
- eventName specifies the name of the fault event.
- eventSetTime indicates when fault event has occured
(delta events) or when fault has been set on (normal events).
- eventSeverity reports the severity level of the event.
- eventInstanceType indicates what kind of object is faulty.
- eventInstanceId specifies what instance is faulty.
- eventInstanceName may contain textual description for
the faulty object.
- eventServAffective specifies whether the event is
immediately service affcetive.
- eventDescription reports possible additional information about the event.
- trapPersistence tells whether this event is a delta or normal event.
- trapSenderNodeId specifies the node ID of the sending network element if
configuring it is supported for the network element, otherwise 0.
- trapSenderStatus specifes the trap status.
- sysObjectID specifies what kind of equipment reports the fault event.
For more information see the eventTable specification NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.57.27.2.1 |
eventClearedTrapThis trap is used to inform network management system that a normal
type fault event has been cleared (state set off).
Objects are used as follows:
- eventSeqNum is the sequence number of the this clearing event. Note that
the sequence number of the cleared event is reported in the trapRefSeqNum
object.
- eventEventId specifies what event has been cleared.
- eventSetTime indicates when fault event has been cleared.
- eventInstanceType indicates what kind of object has been
faulty.
- eventInstanceId specifies what instance has been faulty.
- trapRefSeqNum specifies the sequence number of the cleared event (i.e.
the sequence number was assigned for the event in the events table).
- trapSenderNodeId specifies the node ID of the sending network element if
configuring it is supported for the network element, otherwise 0.
- sysObjectID specifies what kind of equipment reports the clearing event.
For more information see the eventTable specification NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.57.27.2.2 |
multicastPortSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.28 |
multicastPortTable SEQUENCE OF MulticastPortEntry .1.3.6.1.4.1.890.1.5.8.57.28.1 |
multicastPortEntryAn entry in multicastPortTable. MulticastPortEntry .1.3.6.1.4.1.890.1.5.8.57.28.1.1 |
multicastPortMaxGroupLimitedrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.28.1.1.2 |
multicastPortMaxOfGroup0..255rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.28.1.1.3 |
multicastPortIgmpFilteringProfilerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.28.1.1.4 |
multicastPortQuerierModerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.28.1.1.5 |
multicastPortThrottlingActionSpecify throttling action for each portrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.28.1.1.6 |
multicastPortLeaveModerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.28.1.1.7 |
multicastPortLeaveTimeout200..6348800rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.28.1.1.8 |
multicastPortFastLeaveTimeout200..6348800rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.28.1.1.9 |
multicastStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.29 |
multicastStatusTable SEQUENCE OF MulticastStatusEntry .1.3.6.1.4.1.890.1.5.8.57.29.1 |
multicastStatusEntryAn entry in multicastStatusTable. MulticastStatusEntry .1.3.6.1.4.1.890.1.5.8.57.29.1.1 |
multicastStatusIndexro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.1.1.1 |
multicastStatusVlanIDro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.1.1.2 |
multicastStatusPortro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.1.1.3 |
multicastStatusGroupro IpAddress .1.3.6.1.4.1.890.1.5.8.57.29.1.1.4 |
igmpSnpCountTableA count table of igmp query/report/leave message. SEQUENCE OF IgmpSnpCountEntry .1.3.6.1.4.1.890.1.5.8.57.29.2 |
igmpSnpCountEntryAn entry in igmpSnpCountTable. IgmpSnpCountEntry .1.3.6.1.4.1.890.1.5.8.57.29.2.1 |
igmpSnpCountIndexIndex of IgmpCountEntry. 0 means total count in whole systemro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.1 |
igmpSnpV2CountQueryRxro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.2 |
igmpSnpV2CountReportRxro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.3 |
igmpSnpV2CountLeaveRxro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.4 |
igmpSnpV2CountQueryRxDropro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.5 |
igmpSnpV2CountReportRxDropro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.6 |
igmpSnpV2CountLeaveRxDropro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.7 |
igmpSnpV2CountQueryTxro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.8 |
igmpSnpV2CountReportTxro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.9 |
igmpSnpV2CountLeaveTxro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.10 |
igmpSnpV3CountQueryRxro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.11 |
igmpSnpV3CountReportRxro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.12 |
igmpSnpV3CountQueryRxDropro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.13 |
igmpSnpV3CountReportRxDropro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.14 |
igmpSnpV3CountQueryTxro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.15 |
igmpSnpV3CountReportTxro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.2.1.16 |
multicastVlanStatusTable SEQUENCE OF MulticastVlanStatusEntry .1.3.6.1.4.1.890.1.5.8.57.29.3 |
multicastVlanStatusEntryAn entry in multicastVlanStatusTable. MulticastVlanStatusEntry .1.3.6.1.4.1.890.1.5.8.57.29.3.1 |
multicastVlanStatusVlanIDro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.3.1.1 |
multicastVlanStatusTypero Enumeration .1.3.6.1.4.1.890.1.5.8.57.29.3.1.2 |
multicastVlanQueryPortro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.29.3.1.3 |
igmpSnpCountVlanTable SEQUENCE OF IgmpSnpCountVlanEntry .1.3.6.1.4.1.890.1.5.8.57.29.4 |
igmpSnpCountVlanEntryAn entry in igmpGroupVlanStatus. IgmpSnpCountVlanEntry .1.3.6.1.4.1.890.1.5.8.57.29.4.1 |
igmpSnpCountVlanIndexInput vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.1 |
igmpSnpV2CountVlanQueryRxshow igmpsnp Query Rx counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.2 |
igmpSnpV2CountVlanReportRxshow igmpsnp Report Rx counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.3 |
igmpSnpV2CountVlanLeaveRxshow igmpsnp Leave Rx counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.4 |
igmpSnpV2CountVlanQueryRxDropshow igmpsnp Query Rx Error counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.5 |
igmpSnpV2CountVlanReportRxDropshow igmpsnp Report Rx Error counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.6 |
igmpSnpV2CountVlanLeaveRxDropshow igmpsnp Leave Rx Error counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.7 |
igmpSnpV2CountVlanQueryTxshow igmpsnp Query Tx counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.8 |
igmpSnpV2CountVlanReportTxshow igmpsnp Report Tx counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.9 |
igmpSnpV2CountVlanLeaveTxshow igmpsnp Leave Tx counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.10 |
igmpSnpV3CountVlanQueryRxshow igmpsnp Query Rx counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.11 |
igmpSnpV3CountVlanReportRxshow igmpsnp Report Rx counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.12 |
igmpSnpV3CountVlanQueryRxDropshow igmpsnp Query Rx Error counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.13 |
igmpSnpV3CountVlanReportRxDropshow igmpsnp Report Rx Error counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.14 |
igmpSnpV3CountVlanQueryTxshow igmpsnp Query Tx counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.15 |
igmpSnpV3CountVlanReportTxshow igmpsnp Report Tx counters for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.4.1.16 |
igmpSnpCountPortTable SEQUENCE OF IgmpSnpCountPortEntry .1.3.6.1.4.1.890.1.5.8.57.29.5 |
igmpSnpCountPortEntryAn entry in igmpSnpCountPortStatus. IgmpSnpCountPortEntry .1.3.6.1.4.1.890.1.5.8.57.29.5.1 |
igmpSnpV2CountPortQueryRxshow igmpsnp Query Rx counters for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.5.1.1 |
igmpSnpV2CountPortReportRxshow igmpsnp Report Rx counters for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.5.1.2 |
igmpSnpV2CountPortLeaveRxshow igmpsnp Leave Rx counters for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.5.1.3 |
igmpSnpV2CountPortReportRxDropshow igmpsnp Report Rx Error counters for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.5.1.4 |
igmpSnpV2CountPortLeaveRxDropshow igmpsnp Leave Rx Error counters for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.5.1.5 |
igmpSnpV2CountPortReportTxshow igmpsnp Report Tx counters for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.5.1.6 |
igmpSnpV2CountPortLeaveTxshow igmpsnp Leave Tx counters for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.5.1.7 |
igmpSnpV3CountPortQueryRxshow igmpsnp Query Rx counters for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.5.1.8 |
igmpSnpV3CountPortReportRxshow igmpsnp Report Rx counters for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.5.1.9 |
igmpSnpV3CountPortReportRxDropshow igmpsnp Report Rx Error counters for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.5.1.10 |
igmpSnpV3CountPortReportTxshow igmpsnp Report Tx counters for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.5.1.11 |
igmpSnpGroupCountStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.29.6 |
igmpSnpGroupCountNumShow total IGMP snooping group numberro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.6.1 |
igmpSnpGroupCountVlanTable SEQUENCE OF IgmpSnpGroupCountVlanEntry .1.3.6.1.4.1.890.1.5.8.57.29.6.2 |
igmpSnpGroupCountVlanEntryAn entry in igmpSnpGroupVlanStatus. IgmpSnpGroupCountVlanEntry .1.3.6.1.4.1.890.1.5.8.57.29.6.2.1 |
igmpSnpGroupCountVlanIndexShow IGMP snooping group index for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.6.2.1.1 |
igmpSnpGroupCountVlanNumShow IGMP snooping group number for vlanro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.6.2.1.2 |
igmpSnpGroupCountPortTable SEQUENCE OF IgmpSnpGroupCountPortEntry .1.3.6.1.4.1.890.1.5.8.57.29.6.3 |
igmpSnpGroupCountPortEntryAn entry in igmpGroupCountPortStatus. IgmpSnpGroupCountPortEntry .1.3.6.1.4.1.890.1.5.8.57.29.6.3.1 |
igmpSnpGroupCountPortNumShow IGMP snooping group number for portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.29.6.3.1.1 |
igmpFilteringProfileSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.30 |
igmpFilteringMaxNumberOfProfilero INTEGER .1.3.6.1.4.1.890.1.5.8.57.30.1 |
igmpFilteringProfileTable SEQUENCE OF IgmpFilteringProfileEntry .1.3.6.1.4.1.890.1.5.8.57.30.2 |
igmpFilteringProfileEntryAn entry in igmpFilteringProfileTable. IgmpFilteringProfileEntry .1.3.6.1.4.1.890.1.5.8.57.30.2.1 |
igmpFilteringProfileNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.30.2.1.1 |
igmpFilteringProfileStartAddressro IpAddress .1.3.6.1.4.1.890.1.5.8.57.30.2.1.2 |
igmpFilteringProfileEndAddressro IpAddress .1.3.6.1.4.1.890.1.5.8.57.30.2.1.3 |
igmpFilteringProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.30.2.1.4 |
mvrSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.31 |
maxNumberOfMVRro INTEGER .1.3.6.1.4.1.890.1.5.8.57.31.1 |
mvrTable SEQUENCE OF MvrEntry .1.3.6.1.4.1.890.1.5.8.57.31.2 |
mvrEntryAn entry in mvrTable. MvrEntry .1.3.6.1.4.1.890.1.5.8.57.31.2.1 |
mvrVlanID1..4094ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.31.2.1.1 |
mvrNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.31.2.1.2 |
mvrModerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.31.2.1.3 |
mvrRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.31.2.1.4 |
mvr8021pPrioritySet the 802.1p priority of control messages within MVR (0~7)rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.31.2.1.5 |
mvrPortTable SEQUENCE OF MvrPortEntry .1.3.6.1.4.1.890.1.5.8.57.31.3 |
mvrPortEntryAn entry in mvrPortTable. MvrPortEntry .1.3.6.1.4.1.890.1.5.8.57.31.3.1 |
mvrPortRolerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.31.3.1.1 |
mvrPortTaggingrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.31.3.1.2 |
maxNumberOfMvrGroupro INTEGER .1.3.6.1.4.1.890.1.5.8.57.31.4 |
mvrGroupTable SEQUENCE OF MvrGroupEntry .1.3.6.1.4.1.890.1.5.8.57.31.5 |
mvrGroupEntryAn entry in mvrGroupTable. MvrGroupEntry .1.3.6.1.4.1.890.1.5.8.57.31.5.1 |
mvrGroupNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.31.5.1.1 |
mvrGroupStartAddressrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.31.5.1.2 |
mvrGroupEndAddressrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.31.5.1.3 |
mvrGroupRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.31.5.1.4 |
clusterSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.32 |
clusterManager OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.32.1 |
clusterMaxNumOfManagerro INTEGER .1.3.6.1.4.1.890.1.5.8.57.32.1.1 |
clusterManagerTable SEQUENCE OF ClusterManagerEntry .1.3.6.1.4.1.890.1.5.8.57.32.1.2 |
clusterManagerEntryAn entry in clusterManagerTable. ClusterManagerEntry .1.3.6.1.4.1.890.1.5.8.57.32.1.2.1 |
clusterManagerVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.32.1.2.1.1 |
clusterManagerNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.1.2.1.2 |
clusterManagerRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.1.2.1.3 |
clusterMembers OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.32.2 |
clusterMaxNumOfMemberro INTEGER .1.3.6.1.4.1.890.1.5.8.57.32.2.1 |
clusterMemberTable SEQUENCE OF ClusterMemberEntry .1.3.6.1.4.1.890.1.5.8.57.32.2.2 |
clusterMemberEntryAn entry in clusterMemberTable. ClusterMemberEntry .1.3.6.1.4.1.890.1.5.8.57.32.2.2.1 |
clusterMemberMac MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.2.2.1.1 |
clusterMemberNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.2.2.1.2 |
clusterMemberModelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.2.2.1.3 |
clusterMemberPasswordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.2.2.1.4 |
clusterMemberRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.2.2.1.5 |
clusterCandidates OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.32.3 |
clusterCandidateTable SEQUENCE OF ClusterCandidateEntry .1.3.6.1.4.1.890.1.5.8.57.32.3.1 |
clusterCandidateEntryAn entry in clusterCandidateTable. ClusterCandidateEntry .1.3.6.1.4.1.890.1.5.8.57.32.3.1.1 |
clusterCandidateMacro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.3.1.1.1 |
clusterCandidateNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.3.1.1.2 |
clusterCandidateModelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.3.1.1.3 |
clusterStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.32.4 |
clusterStatusRolero Enumeration .1.3.6.1.4.1.890.1.5.8.57.32.4.1 |
clusterStatusManagerro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.4.2 |
clsuterStatusMaxNumOfMemberro INTEGER .1.3.6.1.4.1.890.1.5.8.57.32.4.3 |
clusterStatusMemberTable SEQUENCE OF ClusterStatusMemberEntry .1.3.6.1.4.1.890.1.5.8.57.32.4.4 |
clusterStatusMemberEntryAn entry in clusterStatusMemberTable. ClusterStatusMemberEntry .1.3.6.1.4.1.890.1.5.8.57.32.4.4.1 |
clusterStatusMemberMacro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.4.4.1.1 |
clusterStatusMemberNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.4.4.1.2 |
clusterStatusMemberModelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.32.4.4.1.3 |
clusterStatusMemberStatusro Enumeration .1.3.6.1.4.1.890.1.5.8.57.32.4.4.1.4 |
sysLogSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.33 |
sysLogStatesysLog enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.33.1 |
sysLogTypeTable SEQUENCE OF SysLogTypeEntry .1.3.6.1.4.1.890.1.5.8.57.33.2 |
sysLogTypeEntryAn entry in sysLogTypeTable. SysLogTypeEntry .1.3.6.1.4.1.890.1.5.8.57.33.2.1 |
sysLogTypeIndex INTEGER .1.3.6.1.4.1.890.1.5.8.57.33.2.1.1 |
sysLogTypeNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.33.2.1.2 |
sysLogTypeStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.33.2.1.3 |
sysLogTypeFacilityrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.33.2.1.4 |
sysLogServerTable SEQUENCE OF SysLogServerEntry .1.3.6.1.4.1.890.1.5.8.57.33.3 |
sysLogServerEntryAn entry in sysLogServerTable. SysLogServerEntry .1.3.6.1.4.1.890.1.5.8.57.33.3.1 |
sysLogServerAddress IpAddress .1.3.6.1.4.1.890.1.5.8.57.33.3.1.1 |
sysLogServerLogLevelrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.33.3.1.2 |
sysLogServerRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.33.3.1.3 |
diffservSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.34 |
diffservStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.34.1 |
diffservMapTable SEQUENCE OF DiffservMapEntry .1.3.6.1.4.1.890.1.5.8.57.34.2 |
diffservMapEntryAn entry in diffservMapTable. DiffservMapEntry .1.3.6.1.4.1.890.1.5.8.57.34.2.1 |
diffservMapDscp0-63ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.34.2.1.1 |
diffservMapPriority0-7rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.34.2.1.2 |
diffservPortTable SEQUENCE OF DiffservPortEntry .1.3.6.1.4.1.890.1.5.8.57.34.3 |
diffservPortEntryAn entry in diffservPortTable. DiffservPortEntry .1.3.6.1.4.1.890.1.5.8.57.34.3.1 |
diffservPortStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.34.3.1.1 |
protoBasedVlanSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.35 |
protoBasedVlanTable SEQUENCE OF ProtoBasedVlanEntry .1.3.6.1.4.1.890.1.5.8.57.35.1 |
protoBasedVlanEntryAn entry in protoBasedVlanTable. ProtoBasedVlanEntry .1.3.6.1.4.1.890.1.5.8.57.35.1.1 |
protoBasedVlanPortro INTEGER .1.3.6.1.4.1.890.1.5.8.57.35.1.1.1 |
protoBasedVlanPacketTypero Enumeration .1.3.6.1.4.1.890.1.5.8.57.35.1.1.2 |
protoBasedVlanEtherTypero INTEGER .1.3.6.1.4.1.890.1.5.8.57.35.1.1.3 |
protoBasedVlanNamerw DisplayString .1.3.6.1.4.1.890.1.5.8.57.35.1.1.4 |
protoBasedVlanVidrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.35.1.1.5 |
protoBasedVlanPriorityrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.35.1.1.6 |
protoBasedVlanStaterw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.35.1.1.7 |
mrstp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.36 |
mrstpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.36.1 |
mrstpBridgeTable SEQUENCE OF MrstpBridgeEntry .1.3.6.1.4.1.890.1.5.8.57.36.1.1 |
mrstpBridgeEntryAn entry in mrstpBridgeTable. MrstpBridgeEntry .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1 |
mrstpBridgeIndexThe tree index of the MRSTP.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.1 |
mrstpStateEnabled/disabled on the mrstp bridge.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.2 |
mrstpProtocolSpecificationAn indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined.ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.3 |
mrstpPriorityThe value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
dot1dBaseBridgeAddress.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.4 |
mrstpTimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.5 |
mrstpTopChangesThe total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.ro Counter .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.6 |
mrstpDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.7 |
mrstpRootCostThe cost of the path to the root as seen from
this bridge.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.8 |
mrstpRootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.9 |
mrstpMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.10 |
mrstpHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.11 |
mrstpHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.12 |
mrstpForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
mrstpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.13 |
mrstpBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mrstpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.14 |
mrstpBridgeHelloTimeThe value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds.rw Timeout .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.15 |
mrstpBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mrstpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.890.1.5.8.57.36.1.1.1.16 |
mrstpPortTableA table that contains port-specific information
for the Spanning Tree Protocol. SEQUENCE OF MrstpPortEntry .1.3.6.1.4.1.890.1.5.8.57.36.1.2 |
mrstpPortEntryA list of information maintained by every port
about the Spanning Tree Protocol state for that
port. MrstpPortEntry .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1 |
mrstpPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.1 |
mrstpPortPriorityThe value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
mrstpPort.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.2 |
mrstpPortStateThe port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see mrstpPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.3 |
mrstpPortEnableThe enabled/disabled status of the port.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.4 |
mrstpPortPathCostThe contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.5 |
mrstpPortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.6 |
mrstpPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.7 |
mrstpPortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.8 |
mrstpPortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.9 |
mrstpPortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.10 |
mrstpPortOnBridgeIndexIndetify the bridge index that this port joined to in MRSTP.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.11 |
mrstpPortAdminEdgePortThe administrative value of the Edge Port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port, and a value of false(2) indicates
that this port should be assumed as a non-edge-port.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.12 |
mrstpPortOperEdgePortThe operational value of the Edge Port parameter. The
object is initialized to the value of the corresponding
instance of dot1dStpPortAdminEdgePort. When the
corresponding instance of dot1dStpPortAdminEdgePort is
set, this object will be changed as well. This object
will also be changed to false on reception of a BPDU.ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.36.1.2.1.13 |
mrstpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.36.2 |
dhcpSnp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.100 |
dhcpSnpVlanTable SEQUENCE OF DhcpSnpVlanEntry .1.3.6.1.4.1.890.1.5.8.57.100.1 |
dhcpSnpVlanEntry DhcpSnpVlanEntry .1.3.6.1.4.1.890.1.5.8.57.100.1.1 |
dhcpSnpVlanEntryVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.1.1.1 |
dhcpSnpVlanEntryEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.100.1.1.2 |
dhcpSnpVlanEntryOption82Enablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.100.1.1.3 |
dhcpSnpVlanEntryInforw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.100.1.1.4 |
dhcpSnpPortTable SEQUENCE OF DhcpSnpPortEntry .1.3.6.1.4.1.890.1.5.8.57.100.2 |
dhcpSnpPortEntry DhcpSnpPortEntry .1.3.6.1.4.1.890.1.5.8.57.100.2.1 |
dhcpSnpPortEntryPortro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.2.1.1 |
dhcpSnpPortEntryTrustrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.100.2.1.2 |
dhcpSnpPortEntryRate0 means unlimitedrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.2.1.3 |
dhcpSnpBindTable SEQUENCE OF DhcpSnpBindEntry .1.3.6.1.4.1.890.1.5.8.57.100.3 |
dhcpSnpBindEntry DhcpSnpBindEntry .1.3.6.1.4.1.890.1.5.8.57.100.3.1 |
dhcpSnpBindEntryMacro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.100.3.1.1 |
dhcpSnpBindEntryVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.3.1.2 |
dhcpSnpBindEntryIPro IpAddress .1.3.6.1.4.1.890.1.5.8.57.100.3.1.3 |
dhcpSnpBindEntryLeasero INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.3.1.4 |
dhcpSnpBindEntryTypero Enumeration .1.3.6.1.4.1.890.1.5.8.57.100.3.1.5 |
dhcpSnpBindEntryPortro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.3.1.6 |
dhcpSnpEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.100.4 |
dhcpSnpDb OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.100.5 |
dhcpSnpDbAbortrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.1 |
dhcpSnpDbWriteDelayrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.2 |
dhcpSnpDbUrlrw DisplayString .1.3.6.1.4.1.890.1.5.8.57.100.5.3 |
dhcpSnpDbUrlRenewrw DisplayString .1.3.6.1.4.1.890.1.5.8.57.100.5.4 |
dhcpSnpDbStat OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.100.5.5 |
dhcpSnpDbStatClearrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.100.5.5.1 |
dhcpSnpDbStatAgentRunningro Enumeration .1.3.6.1.4.1.890.1.5.8.57.100.5.5.2 |
dhcpSnpDbStatDelayExpiryro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.3 |
dhcpSnpDbStatAbortExpiryro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.4 |
dhcpSnpDbStatLastSuccTimero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.100.5.5.5 |
dhcpSnpDbStatLastFailTimero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.100.5.5.6 |
dhcpSnpDbStatLastFailReasonro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.100.5.5.7 |
dhcpSnpDbStatTotalAttemptro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.8 |
dhcpSnpDbStatStartupFailro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.9 |
dhcpSnpDbStatSuccTransro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.10 |
dhcpSnpDbStatFailTransro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.11 |
dhcpSnpDbStatSuccReadro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.12 |
dhcpSnpDbStatFailReadro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.13 |
dhcpSnpDbStatSuccWritero INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.14 |
dhcpSnpDbStatFailWritero INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.15 |
dhcpSnpDbStatFirstSuccAccessro Enumeration .1.3.6.1.4.1.890.1.5.8.57.100.5.5.16 |
dhcpSnpDbStatLastIgnoreBindColLast ignored: binding collisionro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.17 |
dhcpSnpDbStatLastIgnoreExpireLeaseLast ignored: expired leasesro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.18 |
dhcpSnpDbStatLastIgnoreInvalidIntfLast ignored: invalid interfacero INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.19 |
dhcpSnpDbStatLastIgnoreUnsuppVlanLast ignored: unsupported vlansro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.20 |
dhcpSnpDbStatLastIgnoreParseLast ignored: parsing errorro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.21 |
dhcpSnpDbStatTotalIgnoreBindColTotal ignored: binding collisionro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.22 |
dhcpSnpDbStatTotalIgnoreExpireLeaseTotal ignored: expired leasesro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.23 |
dhcpSnpDbStatTotalIgnoreInvalidIntfTotal ignored: invalid interfacero INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.24 |
dhcpSnpDbStatTotalIgnoreUnsuppVlanTotal ignored: unsupported vlansro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.25 |
dhcpSnpDbStatTotalIgnoreParseTotal ignored: parsing errorro INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.5.5.26 |
dhcpSnpDbStatFirstSuccessAccessFirst Success Accessro Enumeration .1.3.6.1.4.1.890.1.5.8.57.100.5.5.27 |
dhcpSnpDhcpVlan OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.100.6 |
dhcpSnpDhcpVlanVid0: disable DHCP VLAN.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.100.6.1 |
ipsg OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.101 |
ipsgTable SEQUENCE OF IpsgEntry .1.3.6.1.4.1.890.1.5.8.57.101.1 |
ipsgEntry IpsgEntry .1.3.6.1.4.1.890.1.5.8.57.101.1.1 |
ipsgEntryMacro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.101.1.1.1 |
ipsgEntryVidro INTEGER (1.. 4094) .1.3.6.1.4.1.890.1.5.8.57.101.1.1.2 |
ipsgEntryIprw IpAddress .1.3.6.1.4.1.890.1.5.8.57.101.1.1.3 |
ipsgEntryLeasesecondro INTEGER .1.3.6.1.4.1.890.1.5.8.57.101.1.1.4 |
ipsgEntryTypero Enumeration .1.3.6.1.4.1.890.1.5.8.57.101.1.1.5 |
ipsgEntryPort0 means any portrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.101.1.1.6 |
ipsgEntryStaterw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.101.1.1.7 |
arpInspect OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.102 |
arpInspectSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.102.1 |
arpInspectStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.102.1.1 |
arpInspectFilterAgingTimerw INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.1.2 |
arpInspectLog OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.102.1.3 |
arpInspectLogEntriesrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.1.3.1 |
arpInspectLogRaterw INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.1.3.2 |
arpInspectLogIntervalrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.1.3.3 |
arpInspectVlanTable SEQUENCE OF ArpInspectVlanEntry .1.3.6.1.4.1.890.1.5.8.57.102.1.4 |
arpInspectVlanEntry ArpInspectVlanEntry .1.3.6.1.4.1.890.1.5.8.57.102.1.4.1 |
arpInspectVlanVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.1.4.1.1 |
arpInspectVlanLogrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.102.1.4.1.2 |
arpInspectVlanStatusrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.102.1.4.1.3 |
arpInspectPortTable SEQUENCE OF ArpInspectPortEntry .1.3.6.1.4.1.890.1.5.8.57.102.1.5 |
arpInspectPortEntry ArpInspectPortEntry .1.3.6.1.4.1.890.1.5.8.57.102.1.5.1 |
arpInspectPortIndexro INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.1.5.1.1 |
arpInspectPortTrustrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.102.1.5.1.2 |
arpInspectPortRaterw INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.1.5.1.3 |
arpInspectPortIntervalrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.1.5.1.4 |
arpInspectStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.102.2 |
arpInspectFilterClearrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.102.2.1 |
arpInspectLogClearrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.102.2.2 |
arpInspectFilterTable SEQUENCE OF ArpInspectFilterEntry .1.3.6.1.4.1.890.1.5.8.57.102.2.3 |
arpInspectFilterEntry ArpInspectFilterEntry .1.3.6.1.4.1.890.1.5.8.57.102.2.3.1 |
arpInspectFilterMacro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.102.2.3.1.1 |
arpInspectFilterVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.2.3.1.2 |
arpInspectFilterPortro INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.2.3.1.3 |
arpInspectFilterExpiryro INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.2.3.1.4 |
arpInspectFilterReasonro Enumeration .1.3.6.1.4.1.890.1.5.8.57.102.2.3.1.5 |
arpInspectFilterRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.102.2.3.1.6 |
arpInspectLogTable SEQUENCE OF ArpInspectLogEntry .1.3.6.1.4.1.890.1.5.8.57.102.2.4 |
arpInspectLogEntry ArpInspectLogEntry .1.3.6.1.4.1.890.1.5.8.57.102.2.4.1 |
arpInspectLogMacro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.102.2.4.1.1 |
arpInspectLogVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.2.4.1.2 |
arpInspectLogPortro INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.2.4.1.3 |
arpInspectLogIpro IpAddress .1.3.6.1.4.1.890.1.5.8.57.102.2.4.1.4 |
arpInspectLogNumPktro INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.2.4.1.5 |
arpInspectLogReasonro Enumeration .1.3.6.1.4.1.890.1.5.8.57.102.2.4.1.6 |
arpInspectLogTimero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.102.2.4.1.7 |
arpInspectStatisticsTable SEQUENCE OF ArpInspectStatisticsEntry .1.3.6.1.4.1.890.1.5.8.57.102.2.5 |
arpInspectStatisticsEntry ArpInspectStatisticsEntry .1.3.6.1.4.1.890.1.5.8.57.102.2.5.1 |
arpInspectStatisticsVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.102.2.5.1.1 |
arpInspectStatisticsReceivedro Counter .1.3.6.1.4.1.890.1.5.8.57.102.2.5.1.2 |
arpInspectStatisticsRequestro Counter .1.3.6.1.4.1.890.1.5.8.57.102.2.5.1.3 |
arpInspectStatisticsReplyro Counter .1.3.6.1.4.1.890.1.5.8.57.102.2.5.1.4 |
arpInspectStatisticsForwardro Counter .1.3.6.1.4.1.890.1.5.8.57.102.2.5.1.5 |
arpInspectStatisticsDropro Counter .1.3.6.1.4.1.890.1.5.8.57.102.2.5.1.6 |
arpInspectStatisticsClearrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.102.2.5.1.7 |
trTCMSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.103 |
trTCMStateTwo-rate three color marker enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.103.1 |
trTCMModerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.103.2 |
trTCMPortTable SEQUENCE OF TrTCMPortEntry .1.3.6.1.4.1.890.1.5.8.57.103.3 |
trTCMPortEntryAn entry in trTCMPortTable. TrTCMPortEntry .1.3.6.1.4.1.890.1.5.8.57.103.3.1 |
trTCMPortStateTwo-rate three color marker enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.103.3.1.1 |
trTCMPortCIRAllowed CIR in pkts/s.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.103.3.1.2 |
trTCMPortPIRAllowed PIR in pkts/s.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.103.3.1.3 |
trTCMPortDscpProfileName of trtcm dscp profile.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.103.3.1.7 |
trTCMDscpProfileTable SEQUENCE OF TrTCMDscpProfileEntry .1.3.6.1.4.1.890.1.5.8.57.103.4 |
trTCMDscpProfileEntryAn entry in trTCMDscpProfileTable. TrTCMDscpProfileEntry .1.3.6.1.4.1.890.1.5.8.57.103.4.1 |
trTCMDscpProfileDscpNameName of trtcm dscp profile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.103.4.1.1 |
trTCMDscpProfileDscpGreenGreen value of trtcm dscp profile.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.103.4.1.2 |
trTCMDscpProfileDscpYellowYellow value of trtcm dscp profile.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.103.4.1.3 |
trTCMDscpProfileDscpRedRed value of trtcm dscp profile.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.103.4.1.4 |
trTCMDscpProfileDscpRowstatusRow Status for trtcm dscp profile.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.103.4.1.5 |
loopGuardSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.104 |
loopGuardStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.104.1 |
loopGuardPortTable SEQUENCE OF LoopGuardPortEntry .1.3.6.1.4.1.890.1.5.8.57.104.2 |
loopGuardPortEntryAn entry in loopGuardPortTable. LoopGuardPortEntry .1.3.6.1.4.1.890.1.5.8.57.104.2.1 |
loopGuardPortStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.104.2.1.1 |
subnetBasedVlanSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.105 |
subnetBasedVlanStatesubnet-based vlan feature enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.105.1 |
dhcpVlanOverrideStatedhcp vlan override enabled/disabled when subnet-based vlan is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.105.2 |
subnetBasedVlanTable SEQUENCE OF SubnetBasedVlanEntry .1.3.6.1.4.1.890.1.5.8.57.105.3 |
subnetBasedVlanEntryAn entry in subnetBasedVlanTable. SubnetBasedVlanEntry .1.3.6.1.4.1.890.1.5.8.57.105.3.1 |
subnetBasedVlanSrcIpsource ip for subnet-based vlan entry IpAddress .1.3.6.1.4.1.890.1.5.8.57.105.3.1.1 |
subnetBasedVlanSrcMaskBitsource ip mask-bits for subnet-based vlan entry INTEGER .1.3.6.1.4.1.890.1.5.8.57.105.3.1.2 |
subnetBasedVlanNamename for subnet-based vlan entryrw DisplayString .1.3.6.1.4.1.890.1.5.8.57.105.3.1.3 |
subnetBasedVlanVidvid for subnet-based vlan entryrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.105.3.1.4 |
subnetBasedVlanPrioritypriority for subnet-based vlan entryrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.105.3.1.5 |
subnetBasedVlanEntryStaterw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.105.3.1.6 |
macAuthenticationSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.106 |
macAuthenticationStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.106.1 |
macAuthenticationNamePrefixrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.106.2 |
macAuthenticationPasswordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.106.3 |
macAuthenticationTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.106.4 |
macAuthenticationPortTable SEQUENCE OF MacAuthenticationPortEntry .1.3.6.1.4.1.890.1.5.8.57.106.5 |
macAuthenticationPortEntryAn entry in macAuthenticationPortTable. MacAuthenticationPortEntry .1.3.6.1.4.1.890.1.5.8.57.106.5.1 |
macAuthenticationPortStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.106.5.1.1 |
mstp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.107 |
mstpGen OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.107.1 |
mstpGenStateEnabled/disabled on the mrstp bridge.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.107.1.1 |
mstpGenCfgIdNameThe configuration name that identifies the MST
region and is used as one of the inputs in the
computation of the MST Configuration Identifier.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.107.1.2 |
mstpGenCfgIdRevLevelThis object identifies the MST revision that
identifies the MST region and is used as one
of the inputs in the computation of the MST
configuration Identifier.rw Integer32 .1.3.6.1.4.1.890.1.5.8.57.107.1.3 |
mstpGenCfgIdCfgDigestConfiguration Digest.ro OCTET STRING .1.3.6.1.4.1.890.1.5.8.57.107.1.4 |
mstpGenHelloTimerw Timeout .1.3.6.1.4.1.890.1.5.8.57.107.1.5 |
mstpGenMaxAgerw Timeout .1.3.6.1.4.1.890.1.5.8.57.107.1.6 |
mstpGenForwardDelayrw Timeout .1.3.6.1.4.1.890.1.5.8.57.107.1.7 |
mstpGenMaxHops13.22.f)rw Integer32 .1.3.6.1.4.1.890.1.5.8.57.107.1.8 |
mstpGenCistRootPathCost.ro Integer32 .1.3.6.1.4.1.890.1.5.8.57.107.1.9 |
mstpGenCistRootBrid.ro OCTET STRING .1.3.6.1.4.1.890.1.5.8.57.107.1.10 |
mstMapTableThis table contains one entry for each instance of MSTP. SEQUENCE OF MstMapEntry .1.3.6.1.4.1.890.1.5.8.57.107.20 |
mstMapEntryA conceptual row containing the status of the MSTP instance. MstMapEntry .1.3.6.1.4.1.890.1.5.8.57.107.20.1 |
mstMapIndexUniquely identifies an instance. The entry of this table with index 0
presents always, represents CIST. When SET operation MstiOrCistInstanceIndex .1.3.6.1.4.1.890.1.5.8.57.107.20.1.1 |
mstMapVlans1kA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.890.1.5.8.57.107.20.1.2 |
mstMapVlans2kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.890.1.5.8.57.107.20.1.3 |
mstMapVlans3kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.890.1.5.8.57.107.20.1.4 |
mstMapVlans4kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.890.1.5.8.57.107.20.1.5 |
mstMapRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.107.20.1.6 |
mstVlanTableThis table contains one entry for each VlanId. SEQUENCE OF MstVlanEntry .1.3.6.1.4.1.890.1.5.8.57.107.30 |
mstVlanEntryInformation regarding the instance to which each Vlan is mapped. MstVlanEntry .1.3.6.1.4.1.890.1.5.8.57.107.30.1 |
mstVlanIndexThe VlanId for which this entry contains the instance mapped. INTEGER .1.3.6.1.4.1.890.1.5.8.57.107.30.1.1 |
mstVlanMstIndexAn integer with values ranging from 0 to 64 that identify a
the CIST/MSTI instance to which this VLAN is mappedro MstiOrCistInstanceIndex .1.3.6.1.4.1.890.1.5.8.57.107.30.1.2 |
mstpPortTableA table that contains generic information about
every port that is associated with this bridge. SEQUENCE OF MstpPortEntry .1.3.6.1.4.1.890.1.5.8.57.107.40 |
mstpPortEntryA list of information for each port of the
bridge. MstpPortEntry .1.3.6.1.4.1.890.1.5.8.57.107.40.1 |
mstpPortIndexA unique value, greater than zero, for each Port.
The value for each interface sub-layer
must remain constant at least from one re-initialization
of the entity's network management system to the next re-
initialization. INTEGER .1.3.6.1.4.1.890.1.5.8.57.107.40.1.1 |
mstpPortOperEdgePortro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.107.40.1.2 |
mstpPortOperPointToPointMACro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.107.40.1.3 |
mstpPortAdminEdgePortThe administrative value of the Edge Port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port, and a value of false(2) indicates
that this port should be assumed as a non-edge-port.rw Enumeration .1.3.6.1.4.1.890.1.5.8.57.107.40.1.4 |
mstpXstTable. SEQUENCE OF MstpXstEntry .1.3.6.1.4.1.890.1.5.8.57.107.50 |
mstpXstEntry. MstpXstEntry .1.3.6.1.4.1.890.1.5.8.57.107.50.1 |
mstpXstId0 means CIST.ro MstiOrCistInstanceIndex .1.3.6.1.4.1.890.1.5.8.57.107.50.1.1 |
mstpXstBridgePriorityBridge priority, in steps of 4096.rw Integer32 .1.3.6.1.4.1.890.1.5.8.57.107.50.1.2 |
mstpXstBridgeId.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.107.50.1.3 |
mstpXstInternalRootCost.ro Integer32 .1.3.6.1.4.1.890.1.5.8.57.107.50.1.4 |
mstpXstRootPort.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.107.50.1.5 |
mstpXstTimeSinceTopologyChange.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.890.1.5.8.57.107.50.1.6 |
mstpXstTopologyChangesCount.ro Counter32 .1.3.6.1.4.1.890.1.5.8.57.107.50.1.7 |
mstpXstPortTable. SEQUENCE OF MstpXstPortEntry .1.3.6.1.4.1.890.1.5.8.57.107.60 |
mstpXstPortEntry. MstpXstPortEntry .1.3.6.1.4.1.890.1.5.8.57.107.60.1 |
mstpXstPortXstId0 means CIST. MstiOrCistInstanceIndex .1.3.6.1.4.1.890.1.5.8.57.107.60.1.1 |
mstpXstPortIndexThe value of mstpPortIndex of the Port
in mstpPortTable.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.107.60.1.2 |
mstpXstPortEnable.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.107.60.1.3 |
mstpXstPortPriorityPort priority, in steps of 16.rw Integer32 .1.3.6.1.4.1.890.1.5.8.57.107.60.1.4 |
mstpXstPortPathCost.rw INTEGER .1.3.6.1.4.1.890.1.5.8.57.107.60.1.5 |
mstpXstPortState.ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.107.60.1.6 |
mstpXstPortDesignatedRoot.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.107.60.1.7 |
mstpXstPortDesignatedCost.ro Integer32 .1.3.6.1.4.1.890.1.5.8.57.107.60.1.8 |
mstpXstPortDesignatedBridge.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.107.60.1.9 |
mstpXstPortDesignatedPort.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.107.60.1.10 |
mstpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.107.70 |
newRoot NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.57.107.70.1 |
topologyChange NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.57.107.70.2 |
radiusServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.108 |
radiusAuthServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.108.1 |
radiusAuthServerModerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.108.1.1 |
radiusAuthServerTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.108.1.2 |
radiusAuthServerTable SEQUENCE OF RadiusAuthServerEntry .1.3.6.1.4.1.890.1.5.8.57.108.1.3 |
radiusAuthServerEntryAn entry in radiusAuthServerTable. RadiusAuthServerEntry .1.3.6.1.4.1.890.1.5.8.57.108.1.3.1 |
radiusAuthServerIndex INTEGER .1.3.6.1.4.1.890.1.5.8.57.108.1.3.1.1 |
radiusAuthServerIpAddrrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.108.1.3.1.2 |
radiusAuthServerUdpPortrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.108.1.3.1.3 |
radiusAuthServerSharedSecretrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.108.1.3.1.4 |
radiusAcctServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.108.2 |
radiusAcctServerTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.108.2.1 |
radiusAcctServerTable SEQUENCE OF RadiusAcctServerEntry .1.3.6.1.4.1.890.1.5.8.57.108.2.2 |
radiusAcctServerEntryAn entry in radiusAcctServerTable. RadiusAcctServerEntry .1.3.6.1.4.1.890.1.5.8.57.108.2.2.1 |
radiusAcctServerIndex INTEGER .1.3.6.1.4.1.890.1.5.8.57.108.2.2.1.1 |
radiusAcctServerIpAddrrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.108.2.2.1.2 |
radiusAcctServerUdpPortrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.108.2.2.1.3 |
radiusAcctServerSharedSecretrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.108.2.2.1.4 |
tacacsServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.109 |
tacacsAuthServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.109.1 |
tacacsAuthServerModerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.109.1.1 |
tacacsAuthServerTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.109.1.2 |
tacacsAuthServerTable SEQUENCE OF TacacsAuthServerEntry .1.3.6.1.4.1.890.1.5.8.57.109.1.3 |
tacacsAuthServerEntryAn entry in tacacsAuthServerTable. TacacsAuthServerEntry .1.3.6.1.4.1.890.1.5.8.57.109.1.3.1 |
tacacsAuthServerIndex INTEGER .1.3.6.1.4.1.890.1.5.8.57.109.1.3.1.1 |
tacacsAuthServerIpAddrrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.109.1.3.1.2 |
tacacsAuthServerTcpPortrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.109.1.3.1.3 |
tacacsAuthServerSharedSecretrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.109.1.3.1.4 |
tacacsAcctServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.109.2 |
tacacsAcctServerTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.109.2.1 |
tacacsAcctServerTable SEQUENCE OF TacacsAcctServerEntry .1.3.6.1.4.1.890.1.5.8.57.109.2.2 |
tacacsAcctServerEntryAn entry in tacacsAcctServerTable. TacacsAcctServerEntry .1.3.6.1.4.1.890.1.5.8.57.109.2.2.1 |
tacacsAcctServerIndex INTEGER .1.3.6.1.4.1.890.1.5.8.57.109.2.2.1.1 |
tacacsAcctServerIpAddrrw IpAddress .1.3.6.1.4.1.890.1.5.8.57.109.2.2.1.2 |
tacacsAcctServerTcpPortrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.109.2.2.1.3 |
tacacsAcctServerSharedSecretrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.109.2.2.1.4 |
aaaSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.110 |
authenticationSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.110.1 |
authenticationTypeTable SEQUENCE OF AuthenticationTypeEntry .1.3.6.1.4.1.890.1.5.8.57.110.1.1 |
authenticationTypeEntryAn entry in authenticationTypeTable. AuthenticationTypeEntry .1.3.6.1.4.1.890.1.5.8.57.110.1.1.1 |
authenticationTypeNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.110.1.1.1.1 |
authenticationTypeMethodListrw OCTET STRING .1.3.6.1.4.1.890.1.5.8.57.110.1.1.1.2 |
accountingSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.110.2 |
accountingUpdatePeriodrw Integer32 .1.3.6.1.4.1.890.1.5.8.57.110.2.1 |
accountingTypeTable SEQUENCE OF AccountingTypeEntry .1.3.6.1.4.1.890.1.5.8.57.110.2.2 |
accountingTypeEntryAn entry in accountingTypeTable. AccountingTypeEntry .1.3.6.1.4.1.890.1.5.8.57.110.2.2.1 |
accountingTypeNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.110.2.2.1.1 |
accountingTypeActiverw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.110.2.2.1.2 |
accountingTypeBroadcastrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.110.2.2.1.3 |
accountingTypeModerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.110.2.2.1.4 |
accountingTypeMethodrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.110.2.2.1.5 |
accountingTypePrivilegerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.110.2.2.1.6 |
authorizationSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.110.3 |
authorizationTypeTable SEQUENCE OF AuthorizationTypeEntry .1.3.6.1.4.1.890.1.5.8.57.110.3.1 |
authorizationTypeEntryAn entry in authorizationTypeTable. AuthorizationTypeEntry .1.3.6.1.4.1.890.1.5.8.57.110.3.1.1 |
authorizationTypeNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.110.3.1.1.1 |
authorizationTypeActiverw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.110.3.1.1.2 |
authorizationTypeMethodrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.110.3.1.1.3 |
portIsolationSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.112 |
portIsolationTable SEQUENCE OF PortIsolationEntry .1.3.6.1.4.1.890.1.5.8.57.112.1 |
portIsolationEntryAn entry in portIsolationTable. PortIsolationEntry .1.3.6.1.4.1.890.1.5.8.57.112.1.1 |
portIsolationStatePort isolation enabled/disabled on the port.
Enable(1) to be isolated and not exchange packets.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.112.1.1.1 |
l2ptSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.115 |
l2ptStateL2PT feature enabled/disabled for the switchrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.115.1 |
l2ptMacAddrL2PT destination mac addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.115.2 |
l2ptTable SEQUENCE OF L2ptEntry .1.3.6.1.4.1.890.1.5.8.57.115.3 |
l2ptEntryAn entry in l2ptTable. L2ptEntry .1.3.6.1.4.1.890.1.5.8.57.115.3.1 |
l2ptProtocolGroupL2PT protocols enabled/disabled on the portrw Bits .1.3.6.1.4.1.890.1.5.8.57.115.3.1.1 |
l2ptPointToPointProtocolGroupL2PT point-to-point protocols enabled/disabled on the portrw Bits .1.3.6.1.4.1.890.1.5.8.57.115.3.1.2 |
l2ptModeL2PT port role on the portrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.115.3.1.3 |
vlanMappingSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.116 |
vlanMappingStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.116.1 |
vlanMappingPortTable SEQUENCE OF VlanMappingPortEntry .1.3.6.1.4.1.890.1.5.8.57.116.2 |
vlanMappingPortEntryAn entry in vlanMappingPortTable. VlanMappingPortEntry .1.3.6.1.4.1.890.1.5.8.57.116.2.1 |
vlanMappingPortStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.116.2.1.1 |
vlanMappingRuleTable SEQUENCE OF VlanMappingRuleEntry .1.3.6.1.4.1.890.1.5.8.57.116.3 |
vlanMappingRuleEntryAn entry in vlan-mapping rule table VlanMappingRuleEntry .1.3.6.1.4.1.890.1.5.8.57.116.3.1 |
vlanMappingRuleNameThe name of vlan-mapping entryrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.116.3.1.1 |
vlanMappingRulePortinterface port idro INTEGER .1.3.6.1.4.1.890.1.5.8.57.116.3.1.2 |
vlanMappingRuleVidinner vidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.116.3.1.3 |
vlanMappingRuleTransVidtranslated vidrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.116.3.1.4 |
vlanMappingRulePrioritypriorityrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.116.3.1.5 |
vlanMappingRuleRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.116.3.1.6 |
transceiverInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.117 |
transceiverSerialInfoTable SEQUENCE OF TransceiverSerialInfoEntry .1.3.6.1.4.1.890.1.5.8.57.117.1 |
transceiverSerialInfoEntryAn entry in transceiverSerialInfoTable. TransceiverSerialInfoEntry .1.3.6.1.4.1.890.1.5.8.57.117.1.1 |
transceiverSerialInfoEntryPortIndex of transceiverSerialInfo. It is referred to dot1dBasePortro INTEGER .1.3.6.1.4.1.890.1.5.8.57.117.1.1.1 |
transceiverSerialInfoEntryStatusTransceiver module status.ro Enumeration .1.3.6.1.4.1.890.1.5.8.57.117.1.1.2 |
transceiverSerialInfoEntryVendorTransceiver module vendor name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.117.1.1.3 |
transceiverSerialInfoEntryPartNoPart number provided by transceiver module vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.117.1.1.4 |
transceiverSerialInfoEntrySerialNoSerial number provided by transceiver module vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.117.1.1.5 |
transceiverSerialInfoEntryRevisionRevision level for part number provided by transceiver module vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.117.1.1.6 |
transceiverSerialInfoEntryDateCodeTransceiver module vendor's manufacturing date codero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.117.1.1.7 |
transceiverSerialInfoEntryTransceiverTransceiver module type namesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.117.1.1.8 |
transceiverDdmInfoTable SEQUENCE OF TransceiverDdmInfoEntry .1.3.6.1.4.1.890.1.5.8.57.117.2 |
transceiverDdmInfoEntryAn entry in transceiverDdmInfoTable. TransceiverDdmInfoEntry .1.3.6.1.4.1.890.1.5.8.57.117.2.1 |
transceiverDdmInfoEntryPortIndex of transceiverDdmInfo. This will be referred to dot1dBasePortro INTEGER .1.3.6.1.4.1.890.1.5.8.57.117.2.1.1 |
transceiverDdmInfoEntryTypeTransceiver module status.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.117.2.1.2 |
transceiverDdmInfoEntryAlarmMaxTransceiver module vendor name.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.117.2.1.3 |
transceiverDdmInfoEntryAlarmMinPart number provided by transceiver module vendor.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.117.2.1.4 |
transceiverDdmInfoEntryWarnMaxSerial number provided by transceiver module vendor.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.117.2.1.5 |
transceiverDdmInfoEntryWarnMinRevision level for part number provided by transceiver module vendor.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.117.2.1.6 |
transceiverDdmInfoEntryCurrentTransceiver module vendor's manufacturing date codero INTEGER .1.3.6.1.4.1.890.1.5.8.57.117.2.1.7 |
transceiverDdmInfoEntryDescriptionTransceiver module type namesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.117.2.1.8 |
dot3OamSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.118 |
dot3OamStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.118.1 |
dot3OamPortTable SEQUENCE OF Dot3OamPortEntry .1.3.6.1.4.1.890.1.5.8.57.118.2 |
dot3OamPortEntryAn entry in dot3OamPortTable. Dot3OamPortEntry .1.3.6.1.4.1.890.1.5.8.57.118.2.1 |
dot3OamFunctionsSupportedThe OAM functions supported on this Ethernet-like interface.
OAM consists of separate functional sets beyond the basic
discovery process that is always required. These functional
groups can be supported independently by any implementation.
These values are communicated to the peer via the local
configuration field of Information OAMPDUs.
Setting 'unidirectionalSupport(0)' indicates that the OA
entity supports the transmission of OAMPDUs on links that are
operating in unidirectional mode (traffic flowing in one
direction only). Setting 'loopbackSupport(1)' indicates that
the OAM entity can initiate and respond to loopback commands.
Setting 'eventSupport(2)' indicates that the OAM entity can
send and receive Event Notification OAMPDUs. Setting
'variableSupport(3)' indicates that the OAM entity can send
and receive Variable Request and Response OAMPDUs.rw Bits .1.3.6.1.4.1.890.1.5.8.57.118.2.1.1 |
dot1agCfmSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.119 |
dot1agCfmMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.119.1 |
dot1agCfmMep OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.119.1.7 |
zyswdot1agCfmMepTable SEQUENCE OF Zyswdot1agCfmMepEntry .1.3.6.1.4.1.890.1.5.8.57.119.1.7.1 |
zyswdot1agCfmMepEntryThe dot1agCfmMep table entry Zyswdot1agCfmMepEntry .1.3.6.1.4.1.890.1.5.8.57.119.1.7.1.1 |
zyswdot1agCfmMepTransmitLbmDataTlvSizeSize of data to be included in the LBM Data TLVrw Unsigned32 .1.3.6.1.4.1.890.1.5.8.57.119.1.7.1.1.1 |
sFlowSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.123 |
sFlowStateSflow enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.123.1 |
sFlowCollectorTable SEQUENCE OF SFlowCollectorEntry .1.3.6.1.4.1.890.1.5.8.57.123.2 |
sFlowCollectorEntryAn entry in sflowCollectorTable. SFlowCollectorEntry .1.3.6.1.4.1.890.1.5.8.57.123.2.1 |
sFlowCollectorAddressTypeThe Type of IP address for sflow collector entry.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.8.57.123.2.1.1 |
sFlowCollectorAddressThe IP address for sflow collector entry.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.8.57.123.2.1.2 |
sFlowCollectorUdpPortThe UDP port for sflow collector entry. The range of UDP port is between 1 and 65535.rw Unsigned32 .1.3.6.1.4.1.890.1.5.8.57.123.2.1.3 |
sFlowCollectorRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.123.2.1.4 |
sFlowPortTable SEQUENCE OF SFlowPortEntry .1.3.6.1.4.1.890.1.5.8.57.123.3 |
sFlowPortEntryAn entry in sflowPortTable. SFlowPortEntry .1.3.6.1.4.1.890.1.5.8.57.123.3.1 |
sFlowPortStateSflow enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.123.3.1.1 |
sFlowPortCollectorTable SEQUENCE OF SFlowPortCollectorEntry .1.3.6.1.4.1.890.1.5.8.57.123.4 |
sFlowPortCollectorEntryAn entry in sflowCollectorTable. SFlowPortCollectorEntry .1.3.6.1.4.1.890.1.5.8.57.123.4.1 |
sFlowPortCollectorAddressTypeThe Type of IP address for sflow port collector entry.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.8.57.123.4.1.1 |
sFlowPortCollectorAddressThe IP address for sflow port collector entry.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.890.1.5.8.57.123.4.1.2 |
sFlowPortCollectorSampleRateThe sample rate. The range of samle rate is beteen 256 and 65535.rw Unsigned32 .1.3.6.1.4.1.890.1.5.8.57.123.4.1.3 |
sFlowPortCollectorPollIntervalThe poll interval. The range of poll interval is between 20 and 120.rw Unsigned32 .1.3.6.1.4.1.890.1.5.8.57.123.4.1.4 |
sFlowPortCollectorRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.123.4.1.5 |
sysMemoryPool OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.124 |
sysMemoryPoolTable SEQUENCE OF SysMemoryPoolEntry .1.3.6.1.4.1.890.1.5.8.57.124.1 |
sysMemoryPoolEntryA system memory pool entry SysMemoryPoolEntry .1.3.6.1.4.1.890.1.5.8.57.124.1.1 |
sysMemoryPoolIdThe memory pool idro Unsigned32 .1.3.6.1.4.1.890.1.5.8.57.124.1.1.1 |
sysMemoryPoolNameName of the memory poolro OCTET STRING .1.3.6.1.4.1.890.1.5.8.57.124.1.1.2 |
sysMemoryPoolTotalTotal size of memory pool in bytesro Unsigned32 .1.3.6.1.4.1.890.1.5.8.57.124.1.1.3 |
sysMemoryPoolUsedUsed size of memory pool in bytesro Unsigned32 .1.3.6.1.4.1.890.1.5.8.57.124.1.1.4 |
sysMemoryPoolUtilUtilization of memory pool in bytesro Unsigned32 .1.3.6.1.4.1.890.1.5.8.57.124.1.1.5 |
pppoe OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.125 |
pppoeIaSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.125.1 |
pppoeIaStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.125.1.1 |
pppoeIaAccessNodeIdentifierStringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.125.1.2 |
pppoeIaFlexibleCircuitIDSyntaxActiverw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.125.1.3 |
pppoeIaFlexibleCircuitIDSyntaxIdentifierStringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.125.1.4 |
pppoeIaFlexibleCircuitIDSyntaxOptionrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.125.1.5 |
pppoeIaFlexibleCircuitIDSyntaxDelimiterrw Enumeration .1.3.6.1.4.1.890.1.5.8.57.125.1.6 |
pppoeIaPortTable SEQUENCE OF PppoeIaPortEntry .1.3.6.1.4.1.890.1.5.8.57.125.1.7 |
pppoeIaPortEntry PppoeIaPortEntry .1.3.6.1.4.1.890.1.5.8.57.125.1.7.1 |
pppoeIaPortEntryPortro INTEGER .1.3.6.1.4.1.890.1.5.8.57.125.1.7.1.1 |
pppoeIaPortEntryTrustrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.125.1.7.1.2 |
pppoeIaPortEntryCircuitIDStringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.125.1.7.1.3 |
pppoeIaPortEntryRemoteIDStringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.125.1.7.1.4 |
pppoeIaVlanTable SEQUENCE OF PppoeIaVlanEntry .1.3.6.1.4.1.890.1.5.8.57.125.1.8 |
pppoeIaVlanEntry PppoeIaVlanEntry .1.3.6.1.4.1.890.1.5.8.57.125.1.8.1 |
pppoeIaVlanEntryVidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.125.1.8.1.1 |
pppoeIaVlanEntryCircuitIDrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.125.1.8.1.2 |
pppoeIaVlanEntryRemoteIDrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.125.1.8.1.3 |
pppoeIaVlanEntryRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.125.1.8.1.4 |
pppoeIaPortVlanTable SEQUENCE OF PppoeIaPortVlanEntry .1.3.6.1.4.1.890.1.5.8.57.125.1.9 |
pppoeIaPortVlanEntryAn entry in pppoe ia port & vlan table PppoeIaPortVlanEntry .1.3.6.1.4.1.890.1.5.8.57.125.1.9.1 |
pppoeIaPortVlanEntryPortinterface port idro INTEGER .1.3.6.1.4.1.890.1.5.8.57.125.1.9.1.1 |
pppoeIaPortVlanEntryVidvidro INTEGER .1.3.6.1.4.1.890.1.5.8.57.125.1.9.1.2 |
pppoeIaPortVlanEntryCircuitIDStringThe circuit-id string of pppoe ia port & vlan entryrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.125.1.9.1.3 |
pppoeIaPortVlanEntryRemoteIDStringThe remote-id string of pppoe ia port & vlan entryrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.125.1.9.1.4 |
pppoeIaPortVlanEntryRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.125.1.9.1.5 |
errdisable OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.130 |
recovery OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.130.1 |
errdisableRecoverySetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.130.1.1 |
errdisableRecoveryStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.130.1.1.1 |
errdisableRecoveryReasonTable SEQUENCE OF ErrdisableRecoveryReasonEntry .1.3.6.1.4.1.890.1.5.8.57.130.1.1.2 |
errdisableRecoveryReasonEntry ErrdisableRecoveryReasonEntry .1.3.6.1.4.1.890.1.5.8.57.130.1.1.2.1 |
errdisableRecoveryReasonro Enumeration .1.3.6.1.4.1.890.1.5.8.57.130.1.1.2.1.1 |
errdisableRecoveryReasonActiverw Enumeration .1.3.6.1.4.1.890.1.5.8.57.130.1.1.2.1.2 |
errdisableRecoveryReasonIntervalrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.130.1.1.2.1.3 |
errdisableRecoveryIfStatusTable SEQUENCE OF ErrdisableRecoveryIfStatusEntry .1.3.6.1.4.1.890.1.5.8.57.130.1.1.3 |
errdisableRecoveryIfStatusEntry ErrdisableRecoveryIfStatusEntry .1.3.6.1.4.1.890.1.5.8.57.130.1.1.3.1 |
errdisableRecoveryIfStatusReasonro Enumeration .1.3.6.1.4.1.890.1.5.8.57.130.1.1.3.1.1 |
errdisableRecoveryIfStatusPortro INTEGER .1.3.6.1.4.1.890.1.5.8.57.130.1.1.3.1.2 |
errdisableRecoveryIfStatusTimeToRecoverro INTEGER .1.3.6.1.4.1.890.1.5.8.57.130.1.1.3.1.3 |
detect OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.130.2 |
errdisableDetectReasonTable SEQUENCE OF ErrdisableDetectReasonEntry .1.3.6.1.4.1.890.1.5.8.57.130.2.1 |
errdisableDetectReasonEntryAn entry in errdisableDetectReasonTable. ErrdisableDetectReasonEntry .1.3.6.1.4.1.890.1.5.8.57.130.2.1.1 |
errdisableDetectReasonro Enumeration .1.3.6.1.4.1.890.1.5.8.57.130.2.1.1.1 |
errdisableDetectReasonEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.57.130.2.1.1.2 |
errdisableDetectReasonModerw Enumeration .1.3.6.1.4.1.890.1.5.8.57.130.2.1.1.3 |
errdisableTrapInfoObject OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.130.3 |
errdisableTrapPortro INTEGER .1.3.6.1.4.1.890.1.5.8.57.130.3.1 |
errdisableTrapReasonro Enumeration .1.3.6.1.4.1.890.1.5.8.57.130.3.2 |
errdisableTrapModero Enumeration .1.3.6.1.4.1.890.1.5.8.57.130.3.3 |
errdisableTrapNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.130.4 |
errdisableDetectTrap NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.57.130.4.1 |
errdisableRecoveryTrap NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.57.130.4.2 |
errdisableDetectModeChangeTrap NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.57.130.4.3 |
cpuProtectionSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.131 |
cpuProtectionTable SEQUENCE OF CPUProtectionEntry .1.3.6.1.4.1.890.1.5.8.57.131.1 |
cpuProtectionEntryAn entry in CPUProtectionTable. CPUProtectionEntry .1.3.6.1.4.1.890.1.5.8.57.131.1.1 |
cpuProtectionPortThe Protected Portro INTEGER .1.3.6.1.4.1.890.1.5.8.57.131.1.1.1 |
cpuProtectionReasonThe Protected Reasonro Enumeration .1.3.6.1.4.1.890.1.5.8.57.131.1.1.2 |
cpuProtectionRateLimitSetThe rate limit of a reason on a portrw INTEGER .1.3.6.1.4.1.890.1.5.8.57.131.1.1.3 |
privateVLANSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.57.133 |
privateVLANTable SEQUENCE OF PrivateVLANEntry .1.3.6.1.4.1.890.1.5.8.57.133.1 |
privateVLANEntry PrivateVLANEntry .1.3.6.1.4.1.890.1.5.8.57.133.1.1 |
privateVLANNamePrivate VLAN name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.133.1.1.1 |
privateVLANVidPrivate VLAN ID.ro INTEGER .1.3.6.1.4.1.890.1.5.8.57.133.1.1.2 |
privateVLANRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.57.133.1.1.4 |