Home/Catalog/ZYXEL-IF-LOOPBACK-MIB

ZYXEL-IF-LOOPBACK-MIB

AI MIB Summary

The ZYXEL-IF-LOOPBACK-MIB module enables monitoring and management of loopback interface status, operational state, and traffic statistics on Zyxel networking hardware via SNMP. It provides access to specific interface metrics such as ifOperStatus, ifInOctets, and ifOutOctets for loopback interfaces to facilitate connectivity verification and fault isolation.

The subtree for loopback interface

Main OID:

zyxelIfLoopback.1.3.6.1.4.1.890.1.15.3.28

Objects

Active

Status

Dependencies

Imported Objects

Objects

12 total

Object Name	Syntax	OID
zyxelIfLoopbackThe subtree for loopback interface MODULE-IDENTITY `.1.3.6.1.4.1.890.1.15.3.28`	MODULE-IDENTITY	`.1.3.6.1.4.1.890.1.15.3.28`
RFC1155-SMIThe subtree for loopback interface Unknown `.1.3.6.1.4.1.890.1.15.3.28`	Unknown	`.1.3.6.1.4.1.890.1.15.3.28`
IF-MIBThe subtree for loopback interface NOTIFICATION-TYPE `.1.3.6.1.4.1.890.1.15.3.28`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.890.1.15.3.28`
zyxelIfLoopbackSetup OBJECT IDENTIFIER `.1.3.6.1.4.1.890.1.15.3.28.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.890.1.15.3.28.1`
zyIfLoopbackMaxNumberOfIfsThe maximum number of loopback interface that can be created.ro INTEGER `.1.3.6.1.4.1.890.1.15.3.28.1.1`	INTEGER	`.1.3.6.1.4.1.890.1.15.3.28.1.1`
zyxelIfLoopbackTableThe table contains loopback interface configuration. SEQUENCE OF ZyxelIfLoopbackEntry `.1.3.6.1.4.1.890.1.15.3.28.1.2`	SEQUENCE OF ZyxelIfLoopbackEntry	`.1.3.6.1.4.1.890.1.15.3.28.1.2`
zyxelIfLoopbackEntryAn entry contains loopback interface configuration. ZyxelIfLoopbackEntry `.1.3.6.1.4.1.890.1.15.3.28.1.2.1`	ZyxelIfLoopbackEntry	`.1.3.6.1.4.1.890.1.15.3.28.1.2.1`
zyIfLoopbackIdDisplay the identification number of the loopback interface. INTEGER `.1.3.6.1.4.1.890.1.15.3.28.1.2.1.1`	INTEGER	`.1.3.6.1.4.1.890.1.15.3.28.1.2.1.1`
zyIfLoopbackNameA descriptive name (up to 32 printable ASCII characters) for identification purposes.rw OCTET STRING `.1.3.6.1.4.1.890.1.15.3.28.1.2.1.2`	OCTET STRING	`.1.3.6.1.4.1.890.1.15.3.28.1.2.1.2`
zyIfLoopbackIpAddressThe IP address of an IP routing domain that is associated to a loopback interface.rw IpAddress `.1.3.6.1.4.1.890.1.15.3.28.1.2.1.3`	IpAddress	`.1.3.6.1.4.1.890.1.15.3.28.1.2.1.3`
zyIfLoopbackMaskThe subnet mask of an IP routing domain that is associated to a loopback interface.rw IpAddress `.1.3.6.1.4.1.890.1.15.3.28.1.2.1.4`	IpAddress	`.1.3.6.1.4.1.890.1.15.3.28.1.2.1.4`
zyIfLoopbackRowStatusThis object allows entries to be created and deleted from the loopback interface table.rw RowStatus (SNMPv2-TC) `.1.3.6.1.4.1.890.1.15.3.28.1.2.1.5`	RowStatus (SNMPv2-TC)	`.1.3.6.1.4.1.890.1.15.3.28.1.2.1.5`

More MIBs from ZyXEL

Browse all ZyXELMIBs →

ZYXEL-IES5000-MIB

SNMP MIB module

3448 objects→

IES5206-MIB

The IES5206-MIB provides vendor-specific SNMP management capabilities for the IES5206, IES5212, and IES6217 industrial Ethernet switches, exposing proprietary objects for monitoring device health, interface statistics, and system configuration parameters. This private MIB extension enables granular visibility into hardware status, port-level metrics, and operational states specific to these Allied Telesis industrial networking platforms.

2259 objects→

ZYXEL-ves1724-56-MIB

SNMP MIB module

1842 objects→

ZYXEL-ves1608FE57-MIB

SNMP MIB module

1357 objects→

ZYXEL-XGS4700-48F-MIB

SNMP MIB module

1136 objects→

ZYXEL-MGS370012C-MIB

SNMP MIB module

1095 objects→