ZYXEL-GS2024-MIB
AI MIB Summary
The ZYXEL-GS2024-MIB module enables SNMP-based monitoring of fault event logs and alarm states on Zyxel GS2024 series managed Ethernet switches. It provides structured access to trap definitions and event table entries for diagnosing link failures, hardware anomalies, and system status changes.
Fault event table definitions
Main OID:
faultMIB.1.3.6.1.4.1.890.1.5.8.15.27
305
Objects
Active
Status
12
Dependencies
Imported Objects
Objects
305 total| Object Name |
|---|
zyxel OBJECT IDENTIFIER .1.3.6.1.4.1.890 |
RFC1155-SMI NOTIFICATION-TYPE .1.3.6.1.4.1.890 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.890.1 |
accessSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5 |
esSeries OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8 |
gs2024 OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15 |
sysInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.1 |
sysSwPlatformMajorVersSW platform major version, e.g. 3.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.1.1 |
sysSwPlatformMinorVersSW platform minor version, e.g. 50.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.1.2 |
sysSwModelStringModel letters, e.g. TJro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.1.3 |
sysSwVersionControlNbrVersion control number, e.g. 0.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.1.4 |
sysSwDaySW compilation day, e.g. 19.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.1.5 |
sysSwMonthSW compilation month, e.g. 8.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.1.6 |
sysSwYearSW compilation year, e.g. 2004.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.1.7 |
sysHwMajorVersHW major version number, e.g. 1.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.1.8 |
sysHwMinorVersHW minor version number, e.g. 0.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.1.9 |
sysSerialNumberSerial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.1.10 |
rateLimitSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.2 |
rateLimitStateIngress/egress rate limiting enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.2.1 |
rateLimitPortTable SEQUENCE OF RateLimitPortEntry .1.3.6.1.4.1.890.1.5.8.15.2.2 |
rateLimitPortEntryAn entry in rateLimitPortTable. RateLimitPortEntry .1.3.6.1.4.1.890.1.5.8.15.2.2.1 |
rateLimitPortStateIngress/egress rate limiting enabled/disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.2.2.1.1 |
rateLimitPortIngRateIngress rate in Mbit/s. The granularity of FE port is between 1 and 100. For GE port, the granularity is between 1 and 1000.rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.2.2.1.2 |
rateLimitPortSchemerw Enumeration .1.3.6.1.4.1.890.1.5.8.15.2.2.1.3 |
brLimitSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.3 |
brLimitStateBroadcast/multicast/DLF rate limiting enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.3.1 |
brLimitType0: Broadcast Only, 1: Broadcast and multicast, 2: Broadcast and unknown unicast, 3: Broadcast, multicast and unknown unicast.rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.3.2 |
brLimitPktLimitrw INTEGER .1.3.6.1.4.1.890.1.5.8.15.3.3 |
brLimitPortTable SEQUENCE OF BrLimitPortEntry .1.3.6.1.4.1.890.1.5.8.15.3.4 |
brLimitPortEntryAn entry in brLimitPortTable. BrLimitPortEntry .1.3.6.1.4.1.890.1.5.8.15.3.4.1 |
brLimitPortStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.3.4.1.1 |
portSecuritySetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.4 |
portSecurityStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.4.1 |
portSecurityPortTable SEQUENCE OF PortSecurityPortEntry .1.3.6.1.4.1.890.1.5.8.15.4.2 |
portSecurityPortEntryAn entry in portSecurityPortTable. PortSecurityPortEntry .1.3.6.1.4.1.890.1.5.8.15.4.2.1 |
portSecurityPortStatePort Security enabled/disabled on the port.
Active(1) means this port only accept frames from static MAC addresses that are configured for the port,
and dynamic MAC address frames up to the number specified by portSecurityPortCount object.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.4.2.1.1 |
portSecurityMacFreezerw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.4.3 |
vlanTrunkSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.5 |
vlanTrunkPortTable SEQUENCE OF VlanTrunkPortEntry .1.3.6.1.4.1.890.1.5.8.15.5.1 |
vlanTrunkPortEntryAn entry in vlanTrunkPortTable. VlanTrunkPortEntry .1.3.6.1.4.1.890.1.5.8.15.5.1.1 |
vlanTrunkPortStateVlanTrunking enabled/disabled on the port.
Active(1) to allow frames belonging to unknown
VLAN groups to pass through the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.5.1.1.1 |
radius8021xSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.6 |
radiusLoginPrecedence1. Local Only
2. Local then RADIUS
3. RADIUS Onlyrw INTEGER .1.3.6.1.4.1.890.1.5.8.15.6.1 |
radiusAnd8021xServer OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.6.2 |
radiusIpAddrThe IP address of the RADIUS server.rw IpAddress .1.3.6.1.4.1.890.1.5.8.15.6.2.1 |
radiusUdpPortThe UDP port of the RADIUS server.rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.6.2.2 |
radiusSharedSecretShared secret used for RADIUS and network eleemnt authentication.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.6.2.3 |
portAuthState802.1x port authentication enabled/disabled for the switch.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.6.3 |
portAuthTable SEQUENCE OF PortAuthEntry .1.3.6.1.4.1.890.1.5.8.15.6.4 |
portAuthEntryAn entry in portAuthTable. PortAuthEntry .1.3.6.1.4.1.890.1.5.8.15.6.4.1 |
portAuthEntryState802.1x port authentication enabled or disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.6.4.1.1 |
portReAuthEntryState802.1x port re-authentication enabled or disabled on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.6.4.1.2 |
portReAuthEntryTimerRe-authentication timer in seconds.rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.6.4.1.3 |
hwMonitorInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.7 |
fanRpmTable SEQUENCE OF FanRpmEntry .1.3.6.1.4.1.890.1.5.8.15.7.1 |
fanRpmEntryAn entry in fanRpmTable. FanRpmEntry .1.3.6.1.4.1.890.1.5.8.15.7.1.1 |
fanRpmIndexIndex of FAN.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.1.1.1 |
fanRpmCurValueCurrent speed in Revolutions Per Minute (RPM) on the fan.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.1.1.2 |
fanRpmMaxValueMaximum speed measured in Revolutions Per Minute (RPM) on the fan.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.1.1.3 |
fanRpmMinValueMinimum speed measured in Revolutions Per Minute (RPM) on the fan.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.1.1.4 |
fanRpmLowThreshThe minimum speed at which a normal fan should work.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.1.1.5 |
fanRpmDescr'Normal' indicates that this fan is functioning above the minimum speed.
'Error' indicates that this fan is functioning below the minimum speed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.7.1.1.6 |
tempTable SEQUENCE OF TempEntry .1.3.6.1.4.1.890.1.5.8.15.7.2 |
tempEntryAn entry in tempTable. TempEntry .1.3.6.1.4.1.890.1.5.8.15.7.2.1 |
tempIndexIndex of temperature unit. 1:MAC, 2:CPU, 3:PHYro Enumeration .1.3.6.1.4.1.890.1.5.8.15.7.2.1.1 |
tempCurValueThe current temperature measured at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.2.1.2 |
tempMaxValueThe maximum temperature measured at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.2.1.3 |
tempMinValueThe minimum temperature measured at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.2.1.4 |
tempHighThreshThe upper temperature limit at this sensor.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.2.1.5 |
tempDescr'Normal' indicates temperatures below the threshold and 'Error' for those above.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.7.2.1.6 |
voltageTable SEQUENCE OF VoltageEntry .1.3.6.1.4.1.890.1.5.8.15.7.3 |
voltageEntryAn entry in voltageTable. VoltageEntry .1.3.6.1.4.1.890.1.5.8.15.7.3.1 |
voltageIndexIndex of voltage.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.3.1.1 |
voltageCurValueThe current voltage reading.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.3.1.2 |
voltageMaxValueThe maximum voltage measured at this point.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.3.1.3 |
voltageMinValueThe minimum voltage measured at this point.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.3.1.4 |
voltageNominalValueThe normal voltage at wchich the switch work.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.3.1.5 |
voltageLowThreshThe minimum voltage at which the switch should work.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.7.3.1.6 |
voltageDescr'Normal' indicates that the voltage is within an acceptable operating range
at this point; otherwise 'Error' is displayed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.7.3.1.7 |
snmpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.8 |
snmpGetCommunityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.8.1 |
snmpSetCommunityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.8.2 |
snmpTrapCommunityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.8.3 |
snmpTrapDestTable SEQUENCE OF SnmpTrapDestEntry .1.3.6.1.4.1.890.1.5.8.15.8.4 |
snmpTrapDestEntryAn entry in snmpTrapDestTable. SnmpTrapDestEntry .1.3.6.1.4.1.890.1.5.8.15.8.4.1 |
snmpTrapDestIPIP address of trap destination. IpAddress .1.3.6.1.4.1.890.1.5.8.15.8.4.1.1 |
snmpTrapDestRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.8.4.1.2 |
dateTimeServerSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.9 |
dateTimeServerTypeThe time service protocol.rw Enumeration .1.3.6.1.4.1.890.1.5.8.15.9.1 |
dateTimeServerIPIP address of time server.rw IpAddress .1.3.6.1.4.1.890.1.5.8.15.9.2 |
dateTimeZoneThe time difference between UTC. Ex: +01rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.9.3 |
dateTimeNewDateYearThe new date in year.rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.9.4 |
dateTimeNewDateMonthThe new date in month.rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.9.5 |
dateTimeNewDateDayThe new date in day.rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.9.6 |
dateTimeNewTimeHourThe new time in hour.rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.9.7 |
dateTimeNewTimeMinuteThe new time in minute.rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.9.8 |
dateTimeNewTimeSecondThe new time in second.rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.9.9 |
sysMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.10 |
sysMgmtConfigSaveIf setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file.
If not, running-config will be written to the booting one.rw Enumeration .1.3.6.1.4.1.890.1.5.8.15.10.1 |
sysMgmtBootupConfigThe setting value (read index) will be written into non-volatile memory.
While rebooting, the variable write index is equal to read index initially.
You can change the value of write index by CLI / MIB.rw Enumeration .1.3.6.1.4.1.890.1.5.8.15.10.2 |
sysMgmtRebootReboot switch from SNMP. 1:Reboot, 0:Nothingrw Enumeration .1.3.6.1.4.1.890.1.5.8.15.10.3 |
sysMgmtDefaultConfigErase running config and reset to default.rw Enumeration .1.3.6.1.4.1.890.1.5.8.15.10.4 |
sysMgmtLastActionStatusDisplay status of last mgmt action.ro Enumeration .1.3.6.1.4.1.890.1.5.8.15.10.5 |
sysMgmtSystemStatusThis variable indicates the status of the system.
The sysMgmtAlarmStatus is a bit map represented
a sum, therefore, it can represent multiple defects
simultaneously. The sysNoDefect should be set if and only if
no other flag is set.
The various bit positions are:
0 sysAlarmDetected
1 sysTemperatureError
2 sysFanRPMError
3 sysVoltageRangeErrorro Bits .1.3.6.1.4.1.890.1.5.8.15.10.6 |
sysMgmtCPUUsageShow device CPU load in %, it's the snapshot of CPU load when
getting the values.ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.10.7 |
layer2Setup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.11 |
vlanTypeSetuprw Enumeration .1.3.6.1.4.1.890.1.5.8.15.11.1 |
igmpSnoopingStateSetuprw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.11.2 |
igmpFilteringStateSetuprw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.11.3 |
unknownMulticastFrameForwardingrw Enumeration .1.3.6.1.4.1.890.1.5.8.15.11.4 |
stpStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.11.5 |
ipSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.12 |
dnsIpAddressrw IpAddress .1.3.6.1.4.1.890.1.5.8.15.12.1 |
defaultMgmtrw Enumeration .1.3.6.1.4.1.890.1.5.8.15.12.2 |
inbandIpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.12.3 |
inbandIpTyperw Enumeration .1.3.6.1.4.1.890.1.5.8.15.12.3.1 |
inbandVidrw INTEGER .1.3.6.1.4.1.890.1.5.8.15.12.3.2 |
inbandStaticIprw IpAddress .1.3.6.1.4.1.890.1.5.8.15.12.3.3 |
inbandStaticSubnetMaskrw IpAddress .1.3.6.1.4.1.890.1.5.8.15.12.3.4 |
inbandStaticGatewayrw IpAddress .1.3.6.1.4.1.890.1.5.8.15.12.3.5 |
outOfBandIpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.12.4 |
outOfBandIprw IpAddress .1.3.6.1.4.1.890.1.5.8.15.12.4.1 |
outOfBandSubnetMaskrw IpAddress .1.3.6.1.4.1.890.1.5.8.15.12.4.2 |
outOfBandGatewayrw IpAddress .1.3.6.1.4.1.890.1.5.8.15.12.4.3 |
maxNumOfInbandIpro INTEGER .1.3.6.1.4.1.890.1.5.8.15.12.5 |
inbandIpTable SEQUENCE OF InbandIpEntry .1.3.6.1.4.1.890.1.5.8.15.12.6 |
inbandIpEntryAn entry in inbandIpTable. InbandIpEntry .1.3.6.1.4.1.890.1.5.8.15.12.6.1 |
inbandEntryIprw IpAddress .1.3.6.1.4.1.890.1.5.8.15.12.6.1.1 |
inbandEntrySubnetMaskrw IpAddress .1.3.6.1.4.1.890.1.5.8.15.12.6.1.2 |
inbandEntryGatewayrw IpAddress .1.3.6.1.4.1.890.1.5.8.15.12.6.1.3 |
inbandEntryVidrw INTEGER .1.3.6.1.4.1.890.1.5.8.15.12.6.1.4 |
inbandEntryManageablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.12.6.1.5 |
inbandEntryRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.12.6.1.6 |
mirrorSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.13 |
mirrorStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.13.1 |
mirrorMonitorPortrw INTEGER .1.3.6.1.4.1.890.1.5.8.15.13.2 |
mirrorMirroredPortrw INTEGER .1.3.6.1.4.1.890.1.5.8.15.13.3 |
mirrorDirectionrw Enumeration .1.3.6.1.4.1.890.1.5.8.15.13.4 |
aggrSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.14 |
aggrStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.14.1 |
aggrSystemPriorityrw INTEGER .1.3.6.1.4.1.890.1.5.8.15.14.2 |
aggrGroupTable SEQUENCE OF AggrGroupEntry .1.3.6.1.4.1.890.1.5.8.15.14.3 |
aggrGroupEntryAn entry in aggrGroupTable. AggrGroupEntry .1.3.6.1.4.1.890.1.5.8.15.14.3.1 |
aggrGroupIndexro INTEGER .1.3.6.1.4.1.890.1.5.8.15.14.3.1.1 |
aggrGroupStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.14.3.1.2 |
aggrGroupDynamicStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.14.3.1.3 |
aggrPortTable SEQUENCE OF AggrPortEntry .1.3.6.1.4.1.890.1.5.8.15.14.4 |
aggrPortEntryAn entry in aggrPortTable. AggrPortEntry .1.3.6.1.4.1.890.1.5.8.15.14.4.1 |
aggrPortGrouprw Enumeration .1.3.6.1.4.1.890.1.5.8.15.14.4.1.1 |
aggrPortDynamicStateTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.8.15.14.4.1.2 |
accessCtlSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.15 |
accessCtlTable SEQUENCE OF AccessCtlEntry .1.3.6.1.4.1.890.1.5.8.15.15.1 |
accessCtlEntryAn entry in accessCtlTable. AccessCtlEntry .1.3.6.1.4.1.890.1.5.8.15.15.1.1 |
accessCtlServicero Enumeration .1.3.6.1.4.1.890.1.5.8.15.15.1.1.1 |
accessCtlEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.15.1.1.2 |
accessCtlServicePortrw INTEGER .1.3.6.1.4.1.890.1.5.8.15.15.1.1.3 |
accessCtlTimeoutrw INTEGER .1.3.6.1.4.1.890.1.5.8.15.15.1.1.4 |
securedClientTable SEQUENCE OF SecuredClientEntry .1.3.6.1.4.1.890.1.5.8.15.15.2 |
securedClientEntryAn entry in securedClientTable. SecuredClientEntry .1.3.6.1.4.1.890.1.5.8.15.15.2.1 |
securedClientIndexro INTEGER .1.3.6.1.4.1.890.1.5.8.15.15.2.1.1 |
securedClientEnablerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.15.2.1.2 |
securedClientStartIprw IpAddress .1.3.6.1.4.1.890.1.5.8.15.15.2.1.3 |
securedClientEndIprw IpAddress .1.3.6.1.4.1.890.1.5.8.15.15.2.1.4 |
securedClientServiceBit 0:Telnet, Bit 1:FTP, Bit 2:Web, Bit 3:ICMP, Bit 4:SNMPrw Bits .1.3.6.1.4.1.890.1.5.8.15.15.2.1.5 |
queuingMethodSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.16 |
queuingMethodModerw Enumeration .1.3.6.1.4.1.890.1.5.8.15.16.1 |
queuingMethodTable SEQUENCE OF QueuingMethodEntry .1.3.6.1.4.1.890.1.5.8.15.16.2 |
queuingMethodEntryAn entry in queuingMethodTable. QueuingMethodEntry .1.3.6.1.4.1.890.1.5.8.15.16.2.1 |
queuingMethodQueue0...3ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.16.2.1.1 |
queuingMethodWeight0...15rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.16.2.1.2 |
staticRouteSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.17 |
maxNumberOfStaticRoutesro INTEGER .1.3.6.1.4.1.890.1.5.8.15.17.1 |
staticRouteTable SEQUENCE OF StaticRouteEntry .1.3.6.1.4.1.890.1.5.8.15.17.2 |
staticRouteEntryAn entry in staticRouteTable. StaticRouteEntry .1.3.6.1.4.1.890.1.5.8.15.17.2.1 |
staticRouteNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.17.2.1.1 |
staticRouteIp IpAddress .1.3.6.1.4.1.890.1.5.8.15.17.2.1.2 |
staticRouteMask IpAddress .1.3.6.1.4.1.890.1.5.8.15.17.2.1.3 |
staticRouteGatewayrw IpAddress .1.3.6.1.4.1.890.1.5.8.15.17.2.1.4 |
staticRouteMetricrw INTEGER .1.3.6.1.4.1.890.1.5.8.15.17.2.1.5 |
staticRouteRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.17.2.1.6 |
arpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.18 |
arpTable SEQUENCE OF ArpEntry .1.3.6.1.4.1.890.1.5.8.15.18.1 |
arpEntryAn entry in arpTable. ArpEntry .1.3.6.1.4.1.890.1.5.8.15.18.1.1 |
arpIndexro INTEGER .1.3.6.1.4.1.890.1.5.8.15.18.1.1.1 |
arpIpAddrro IpAddress .1.3.6.1.4.1.890.1.5.8.15.18.1.1.2 |
arpMacAddrro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.18.1.1.3 |
arpMacVidro INTEGER .1.3.6.1.4.1.890.1.5.8.15.18.1.1.4 |
arpType1-static, 2-dynamicro INTEGER .1.3.6.1.4.1.890.1.5.8.15.18.1.1.5 |
portOpModeSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.19 |
portOpModePortTable SEQUENCE OF PortOpModePortEntry .1.3.6.1.4.1.890.1.5.8.15.19.1 |
portOpModePortEntryAn entry in portOpModePortTable. PortOpModePortEntry .1.3.6.1.4.1.890.1.5.8.15.19.1.1 |
portOpModePortSpeedDuplexrw Enumeration .1.3.6.1.4.1.890.1.5.8.15.19.1.1.1 |
portOpModePortFlowCntlrw Enumeration .1.3.6.1.4.1.890.1.5.8.15.19.1.1.2 |
portOpModePortNamerw OCTET STRING .1.3.6.1.4.1.890.1.5.8.15.19.1.1.3 |
portOpModePortModuleTypero Enumeration .1.3.6.1.4.1.890.1.5.8.15.19.1.1.4 |
portOpModePortLinkUpTypero Enumeration .1.3.6.1.4.1.890.1.5.8.15.19.1.1.5 |
portOpModePortIntrusionLockrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.19.1.1.6 |
portOpModePortLBTestStatusThis entry display latest loopback test status of port while performing loopback test.ro Enumeration .1.3.6.1.4.1.890.1.5.8.15.19.1.1.7 |
portOpModePortJumboFramerw Enumeration .1.3.6.1.4.1.890.1.5.8.15.19.1.1.8 |
portBasedVlanSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.20 |
portBasedVlanPortListTable SEQUENCE OF PortBasedVlanPortListEntry .1.3.6.1.4.1.890.1.5.8.15.20.1 |
portBasedVlanPortListEntryAn entry in portBasedVlanPortListTable. PortBasedVlanPortListEntry .1.3.6.1.4.1.890.1.5.8.15.20.1.1 |
portBasedVlanPortListMembersrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.20.1.1.1 |
multicastPortSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.21 |
multicastPortTable SEQUENCE OF MulticastPortEntry .1.3.6.1.4.1.890.1.5.8.15.21.1 |
multicastPortEntryAn entry in multicastPortTable. MulticastPortEntry .1.3.6.1.4.1.890.1.5.8.15.21.1.1 |
multicastPortImmediateLeaverw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.21.1.1.1 |
multicastPortMaxGroupLimitedrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.21.1.1.2 |
multicastPortMaxOfGroup0..255rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.21.1.1.3 |
multicastPortIgmpFilteringProfilerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.21.1.1.4 |
multicastStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.22 |
multicastStatusTable SEQUENCE OF MulticastStatusEntry .1.3.6.1.4.1.890.1.5.8.15.22.1 |
multicastStatusEntryAn entry in multicastStatusTable. MulticastStatusEntry .1.3.6.1.4.1.890.1.5.8.15.22.1.1 |
multicastStatusIndexro INTEGER .1.3.6.1.4.1.890.1.5.8.15.22.1.1.1 |
multicastStatusVlanIDro INTEGER .1.3.6.1.4.1.890.1.5.8.15.22.1.1.2 |
multicastStatusPortro INTEGER .1.3.6.1.4.1.890.1.5.8.15.22.1.1.3 |
multicastStatusGroupro IpAddress .1.3.6.1.4.1.890.1.5.8.15.22.1.1.4 |
igmpFilteringProfileSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.23 |
igmpFilteringMaxNumberOfProfilero INTEGER .1.3.6.1.4.1.890.1.5.8.15.23.1 |
igmpFilteringProfileTable SEQUENCE OF IgmpFilteringProfileEntry .1.3.6.1.4.1.890.1.5.8.15.23.2 |
igmpFilteringProfileEntryAn entry in igmpFilteringProfileTable. IgmpFilteringProfileEntry .1.3.6.1.4.1.890.1.5.8.15.23.2.1 |
igmpFilteringProfileNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.23.2.1.1 |
igmpFilteringProfileStartAddressro IpAddress .1.3.6.1.4.1.890.1.5.8.15.23.2.1.2 |
igmpFilteringProfileEndAddressro IpAddress .1.3.6.1.4.1.890.1.5.8.15.23.2.1.3 |
igmpFilteringProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.23.2.1.4 |
mvrSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.24 |
maxNumberOfMVRro INTEGER .1.3.6.1.4.1.890.1.5.8.15.24.1 |
mvrTable SEQUENCE OF MvrEntry .1.3.6.1.4.1.890.1.5.8.15.24.2 |
mvrEntryAn entry in mvrTable. MvrEntry .1.3.6.1.4.1.890.1.5.8.15.24.2.1 |
mvrVlanID1..4094ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.24.2.1.1 |
mvrNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.24.2.1.2 |
mvrModerw Enumeration .1.3.6.1.4.1.890.1.5.8.15.24.2.1.3 |
mvrRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.24.2.1.4 |
mvrPortTable SEQUENCE OF MvrPortEntry .1.3.6.1.4.1.890.1.5.8.15.24.3 |
mvrPortEntryAn entry in mvrPortTable. MvrPortEntry .1.3.6.1.4.1.890.1.5.8.15.24.3.1 |
mvrPortRolerw Enumeration .1.3.6.1.4.1.890.1.5.8.15.24.3.1.1 |
mvrPortTaggingrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.24.3.1.2 |
maxNumberOfMvrGroupro INTEGER .1.3.6.1.4.1.890.1.5.8.15.24.4 |
mvrGroupTable SEQUENCE OF MvrGroupEntry .1.3.6.1.4.1.890.1.5.8.15.24.5 |
mvrGroupEntryAn entry in mvrGroupTable. MvrGroupEntry .1.3.6.1.4.1.890.1.5.8.15.24.5.1 |
mvrGroupNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.24.5.1.1 |
mvrGroupStartAddressrw IpAddress .1.3.6.1.4.1.890.1.5.8.15.24.5.1.2 |
mvrGroupEndAddressrw IpAddress .1.3.6.1.4.1.890.1.5.8.15.24.5.1.3 |
mvrGroupRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.24.5.1.4 |
diffservSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.25 |
diffservStaterw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.5.8.15.25.1 |
diffservMapTable SEQUENCE OF DiffservMapEntry .1.3.6.1.4.1.890.1.5.8.15.25.2 |
diffservMapEntryAn entry in diffservMapTable. DiffservMapEntry .1.3.6.1.4.1.890.1.5.8.15.25.2.1 |
diffservMapDscp0-63ro INTEGER .1.3.6.1.4.1.890.1.5.8.15.25.2.1.1 |
diffservMapPriority0-7rw INTEGER .1.3.6.1.4.1.890.1.5.8.15.25.2.1.2 |
clusterSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.26 |
clusterManager OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.26.1 |
clusterMaxNumOfManagerro INTEGER .1.3.6.1.4.1.890.1.5.8.15.26.1.1 |
clusterManagerTable SEQUENCE OF ClusterManagerEntry .1.3.6.1.4.1.890.1.5.8.15.26.1.2 |
clusterManagerEntryAn entry in clusterManagerTable. ClusterManagerEntry .1.3.6.1.4.1.890.1.5.8.15.26.1.2.1 |
clusterManagerVidro INTEGER .1.3.6.1.4.1.890.1.5.8.15.26.1.2.1.1 |
clusterManagerNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.1.2.1.2 |
clusterManagerRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.1.2.1.3 |
clusterMembers OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.26.2 |
clusterMaxNumOfMemberro INTEGER .1.3.6.1.4.1.890.1.5.8.15.26.2.1 |
clusterMemberTable SEQUENCE OF ClusterMemberEntry .1.3.6.1.4.1.890.1.5.8.15.26.2.2 |
clusterMemberEntryAn entry in clusterMemberTable. ClusterMemberEntry .1.3.6.1.4.1.890.1.5.8.15.26.2.2.1 |
clusterMemberMac DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.2.2.1.1 |
clusterMemberNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.2.2.1.2 |
clusterMemberModelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.2.2.1.3 |
clusterMemberPasswordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.2.2.1.4 |
clusterMemberRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.2.2.1.5 |
clusterCandidates OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.26.3 |
clusterCandidateTable SEQUENCE OF ClusterCandidateEntry .1.3.6.1.4.1.890.1.5.8.15.26.3.1 |
clusterCandidateEntryAn entry in clusterCandidateTable. ClusterCandidateEntry .1.3.6.1.4.1.890.1.5.8.15.26.3.1.1 |
clusterCandidateMacro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.3.1.1.1 |
clusterCandidateNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.3.1.1.2 |
clusterCandidateModelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.3.1.1.3 |
clusterStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.26.4 |
clusterStatusRolero Enumeration .1.3.6.1.4.1.890.1.5.8.15.26.4.1 |
clusterStatusManagerro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.4.2 |
clsuterStatusMaxNumOfMemberro INTEGER .1.3.6.1.4.1.890.1.5.8.15.26.4.3 |
clusterStatusMemberTable SEQUENCE OF ClusterStatusMemberEntry .1.3.6.1.4.1.890.1.5.8.15.26.4.4 |
clusterStatusMemberEntryAn entry in clusterStatusMemberTable. ClusterStatusMemberEntry .1.3.6.1.4.1.890.1.5.8.15.26.4.4.1 |
clusterStatusMemberMacro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.4.4.1.1 |
clusterStatusMemberNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.4.4.1.2 |
clusterStatusMemberModelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.26.4.4.1.3 |
clusterStatusMemberStatusro Enumeration .1.3.6.1.4.1.890.1.5.8.15.26.4.4.1.4 |
faultMIBFault event table definitions MODULE-IDENTITY .1.3.6.1.4.1.890.1.5.8.15.27 |
eventObjects OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.27.1 |
eventTableA list of currently active fault events. All faults
of normal type regardless of their severity level
are recorded in the event table. When a normal
type fault is cleared it is deleted from the event
table. SEQUENCE OF EventEntry .1.3.6.1.4.1.890.1.5.8.15.27.1.1 |
eventEntryAn entry containing information about an
event in the event table. EventEntry .1.3.6.1.4.1.890.1.5.8.15.27.1.1.1 |
eventSeqNumThis variable represents the sequence number of an event.
Sequence number is incremented monotonically starting
from 0 until it reaches its maximum and wraps around back
to 0.
Sequence number is incremented when
- the state of a normal type fault is set on (the same sequence
number is present in the events table as well as in the trap
that is sent to notify about the fault on event)
- delta event occurs (sequence number present in trap message)
- the state of a normal type fault is set off (sequence number
present in trap that is sent to notify for clearing).ro Integer32 .1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.1 |
eventEventIdThis variable represents the event ID which uniquely
identifies the event in the entire system.ro EventIdNumber .1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.2 |
eventNameThis variable represents the name of the event, for
example 'Ethernet Link Down'ro DisplayString .1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.3 |
eventInstanceTypeThis variable represents the type of InstanceId of a
particular event in the event table. In brief
the instanceType refers to the type of sub-component
generating this event in the system, for example
switch (5). For more details see the textual
conventions section.
AFFECTS: eventInstanceId,
eventInstanceNamero InstanceType .1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.4 |
eventInstanceIdThis variable represents the InstanceId of a particular
event in the event current table. In brief the instanceId
refers to the sub-component generating this event in the
system, for example '1' for port 1. For more details see
the textual conventions section.
DEPENDS ON: eventInstanceTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.5 |
eventInstanceNameThis variable is mainly used to store additional information
about the sub-component that is generating an event. For
example this field may specify what cooling fan is faulty.
DEPENDS ON: eventInstanceTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.6 |
eventSeverityThis variable dictates the urgency of action when a event
occurs. There are four severity levels - Critical, Major,
Minor, and Informational. Critical events are those, which
require immediate operator intervention to prevent/reduce
system down time. Major events require quick attention and
Minor events possibly require some attention. Informational
events indicate the occurrence of events that may need to be
investigated.ro EventSeverity .1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.7 |
eventSetTimeThis table contains only normal events and this variable
represents the time when the event become active, i.e. the
number of seconds since Jan 1, 1970 12:00AM.ro UtcTimeStamp .1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.8 |
eventDescriptionThis variable contains a description of the event and reasons
behind the event. This is a free format alpha-numeric string
that is set by the entity generating this event. This variable
may be empty if there is no usefull information to report.
The maximum length of this string is 255 characters.ro DisplayString .1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.9 |
eventServAffectiveThis variable indicates whether the event is service affective or notro EventServiceAffective .1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.10 |
faultTrapsMIBFault event trap definitions MODULE-IDENTITY .1.3.6.1.4.1.890.1.5.8.15.28 |
trapInfoObjects OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.28.1 |
trapRefSeqNumIndicates the former sequence number of a cleared event
in the event table. Not intended to read but only used in
trap notifications.ro Integer32 .1.3.6.1.4.1.890.1.5.8.15.28.1.1 |
trapPersistenceIndicates whether the event is delta (automatically and
immediately cleared) or normal (not automatically cleared).
Not intended to read but only used in trap notifications.ro EventPersistence .1.3.6.1.4.1.890.1.5.8.15.28.1.2 |
trapSenderNodeIdRepresents the node ID of the sending network element. If not
supported should be set to 0. Not intended to read but only
used in trap notifications.ro Integer32 .1.3.6.1.4.1.890.1.5.8.15.28.1.3 |
trapNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.15.28.2 |
eventOnTrapThis trap is used to inform network management system that a delta
fault event (events that are automatically cleared) has occured
or a normal fault event (not automatically cleared) state has
been set on.
Objects are used as follows:
- eventSeqNum is the sequence number of the event. For normal
type of events must equal to the sequence number of the event
in the events table.
- eventEventId specifies what fault event has occured.
- eventName specifies the name of the fault event.
- eventSetTime indicates when fault event has occured
(delta events) or when fault has been set on (normal events).
- eventSeverity reports the severity level of the event.
- eventInstanceType indicates what kind of object is faulty.
- eventInstanceId specifies what instance is faulty.
- eventInstanceName may contain textual description for
the faulty object.
- eventServAffective specifies whether the event is
immediately service affcetive.
- eventDescription reports possible additional information about the event.
- trapPersistence tells whether this event is a delta or normal event.
- trapSenderNodeId specifies the node ID of the sending network element if
configuring it is supported for the network element, otherwise 0.
- sysObjectID specifies what kind of equipment reports the fault event.
For more information see the eventTable specification NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.15.28.2.1 |
eventClearedTrapThis trap is used to inform network management system that a normal
type fault event has been cleared (state set off).
Objects are used as follows:
- eventSeqNum is the sequence number of the this clearing event. Note that
the sequence number of the cleared event is reported in the trapRefSeqNum
object.
- eventEventId specifies what event has been cleared.
- eventSetTime indicates when fault event has been cleared.
- eventInstanceType indicates what kind of object has been
faulty.
- eventInstanceId specifies what instance has been faulty.
- trapRefSeqNum specifies the sequence number of the cleared event (i.e.
the sequence number was assigned for the event in the events table).
- trapSenderNodeId specifies the node ID of the sending network element if
configuring it is supported for the network element, otherwise 0.
- sysObjectID specifies what kind of equipment reports the clearing event.
For more information see the eventTable specification NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.15.28.2.2 |