Home/Catalog/ZYXEL-ES2108G-MIB

ZYXEL-ES2108G-MIB

AI MIB Summary

The ZYXEL-ES2108G-MIB module enables SNMP-based monitoring of fault event logs and alarm states on ZyXEL ES2108G managed Ethernet switches. It provides structured access to trap definitions and event table entries for diagnosing link failures, hardware anomalies, and operational errors within the switch fabric.

Fault event table definitions
Main OID:
faultMIB.1.3.6.1.4.1.890.1.5.8.19.26
247
Objects
Active
Status
11
Dependencies

Imported Objects

SNMPv2-SMI
RFC1155-SMI
SNMPv2-TC
RFC1213-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
BRIDGE-MIB
IF-MIB
SNMP-FRAMEWORK-MIB
INET-ADDRESS-MIB
DISMAN-PING-MIB

Objects

247 total
Object Name
zyxel
OBJECT IDENTIFIER
.1.3.6.1.4.1.890
SNMPv2-SMI
NOTIFICATION-TYPE
.1.3.6.1.4.1.890
products
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1
accessSwitch
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5
esSeries
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8
es2108g
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19
sysInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.1
sysSwPlatformMajorVersSW platform major version, e.g. 3.ro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.1.1
sysSwPlatformMinorVersSW platform minor version, e.g. 50.ro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.1.2
sysSwModelStringModel letters, e.g. TJro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.1.3
sysSwVersionControlNbrVersion control number, e.g. 0.ro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.1.4
sysSwDaySW compilation day, e.g. 19.ro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.1.5
sysSwMonthSW compilation month, e.g. 8.ro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.1.6
sysSwYearSW compilation year, e.g. 2004.ro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.1.7
sysHwMajorVersHW major version number, e.g. 1.ro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.1.8
sysHwMinorVersHW minor version number, e.g. 0.ro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.1.9
sysSerialNumberSerial numberro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.1.10
rateLimitSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.2
rateLimitStateIngress/egress rate limiting enabled/disabled for the switch.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.2.1
rateLimitPortTable
SEQUENCE OF RateLimitPortEntry
.1.3.6.1.4.1.890.1.5.8.19.2.2
rateLimitPortEntryAn entry in rateLimitPortTable.
RateLimitPortEntry
.1.3.6.1.4.1.890.1.5.8.19.2.2.1
rateLimitPortStateIngress/egress rate limiting enabled/disabled on the port.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.2.2.1.1
rateLimitPortIngRateIngress rate in Kbit/s. The range of FE port is between 64 and 100,000. For GE port, the range is between 64 and 1000,000.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.2.2.1.2
rateLimitPortEgrRateEgress rate in Kbit/s. The range of FE port is between 64 and 100,000. For GE port, the range is between 64 and 1000,000.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.2.2.1.3
brLimitSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.3
brLimitStateBroadcast/multicast/DLF rate limiting enabled/disabled for the switch.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.3.1
brLimitPortTable
SEQUENCE OF BrLimitPortEntry
.1.3.6.1.4.1.890.1.5.8.19.3.2
brLimitPortEntryAn entry in brLimitPortTable.
BrLimitPortEntry
.1.3.6.1.4.1.890.1.5.8.19.3.2.1
brLimitPortStateRate limiting enabled/disabled on the port.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.3.2.1.1
brLimitPortRateAllowed rate in in Kbit/s. The range of FE port is between 64 and 100,000. For GE port, the range is between 64 and 1000,000.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.3.2.1.2
portSecuritySetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.4
portSecurityStaterw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.4.1
portSecurityPortTable
SEQUENCE OF PortSecurityPortEntry
.1.3.6.1.4.1.890.1.5.8.19.4.2
portSecurityPortEntryAn entry in portSecurityPortTable.
PortSecurityPortEntry
.1.3.6.1.4.1.890.1.5.8.19.4.2.1
portSecurityPortStatePort Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSecurityPortCount object.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.4.2.1.1
portSecurityPortLearnStateMAC address learning enabled/disable on the port.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.4.2.1.2
portSecurityPortCountNumber of (dynamic) MAC addresses that may be learned on the port.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.4.2.1.3
portSecurityMacFreezeThis entry is used to execute MacFreeze action to port. It's meaningless while reading this entry.rw
PortList (Q-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.4.3
vlanTrunkSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.5
vlanTrunkPortTable
SEQUENCE OF VlanTrunkPortEntry
.1.3.6.1.4.1.890.1.5.8.19.5.1
vlanTrunkPortEntryAn entry in vlanTrunkPortTable.
VlanTrunkPortEntry
.1.3.6.1.4.1.890.1.5.8.19.5.1.1
vlanTrunkPortStateVlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.5.1.1.1
radius8021xSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.6
radiusLoginPrecedence1. Local Only 2. Local then RADIUS 3. RADIUS Onlyrw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.6.1
radiusAnd8021xServer
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.6.2
radiusIpAddrThe IP address of the RADIUS server.rw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.6.2.1
radiusUdpPortThe UDP port of the RADIUS server.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.6.2.2
radiusSharedSecretShared secret used for RADIUS and network element authentication.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.6.2.3
portAuthState802.1x port authentication enabled/disabled for the switch.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.6.3
portAuthTable
SEQUENCE OF PortAuthEntry
.1.3.6.1.4.1.890.1.5.8.19.6.4
portAuthEntryAn entry in portAuthTable.
PortAuthEntry
.1.3.6.1.4.1.890.1.5.8.19.6.4.1
portAuthEntryState802.1x port authentication enabled or disabled on the port.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.6.4.1.1
portReAuthEntryState802.1x port re-authentication enabled or disabled on the port.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.6.4.1.2
portReAuthEntryTimerRe-authentication timer in seconds.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.6.4.1.3
snmpSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.7
snmpGetCommunityrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.7.1
snmpSetCommunityrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.7.2
snmpTrapCommunityrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.7.3
snmpTrapDestTable
SEQUENCE OF SnmpTrapDestEntry
.1.3.6.1.4.1.890.1.5.8.19.7.4
snmpTrapDestEntryAn entry in snmpTrapDestTable.
SnmpTrapDestEntry
.1.3.6.1.4.1.890.1.5.8.19.7.4.1
snmpTrapDestIPIP address of trap destination.ro
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.7.4.1.1
snmpTrapDestRowStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.7.4.1.2
dateTimeServerSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.8
dateTimeServerTypeThe time service protocol.rw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.8.1
dateTimeServerIPIP address of time server.rw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.8.2
dateTimeZoneThe time difference between UTC. Ex: +01rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.8.3
dateTimeNewDateYearThe new date in year.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.8.4
dateTimeNewDateMonthThe new date in month.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.8.5
dateTimeNewDateDayThe new date in day.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.8.6
dateTimeNewTimeHourThe new time in hour.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.8.7
dateTimeNewTimeMinuteThe new time in minute.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.8.8
dateTimeNewTimeSecondThe new time in second.rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.8.9
sysMgmt
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.9
sysMgmtConfigSaveIf setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config will be written to the booting one.rw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.9.1
sysMgmtBootupConfigThe setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can change the value of write index by CLI / MIB.rw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.9.2
sysMgmtRebootReboot switch from SNMP. 1:Reboot, 0:Nothingrw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.9.3
sysMgmtDefaultConfigErase running config and reset to default.rw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.9.4
sysMgmtLastActionStatusDisplay status of last mgmt action.ro
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.9.5
layer2Setup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.10
vlanTypeSetuprw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.10.1
igmpSnoopingStateSetuprw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.10.2
tagVlanPortIsolationStaterw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.10.3
stpStaterw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.10.4
tagVlanIngressCheckStaterw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.10.5
ipSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.11
dnsIpAddressrw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.11.1
defaultMgmtIpSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.11.2
defaultMgmtIpTyperw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.11.2.1
defaultMgmtVidrw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.11.2.2
defaultMgmtStaticIprw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.11.2.3
defaultMgmtStaticSubnetMaskrw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.11.2.4
defaultMgmtStaticGatewayrw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.11.2.5
maxNumOfMgmtIpro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.11.3
mgmtIpTable
SEQUENCE OF MgmtIpEntry
.1.3.6.1.4.1.890.1.5.8.19.11.6
mgmtIpEntryAn entry in mgmtIpTable.
MgmtIpEntry
.1.3.6.1.4.1.890.1.5.8.19.11.6.1
mgmtEntryIprw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.11.6.1.1
mgmtEntrySubnetMaskrw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.11.6.1.2
mgmtEntryGatewayrw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.11.6.1.3
mgmtEntryVidro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.11.6.1.4
mgmtEntryManageablerw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.11.6.1.5
mgmtEntryRowStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.11.6.1.6
filterSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.12
filterTable
SEQUENCE OF FilterEntry
.1.3.6.1.4.1.890.1.5.8.19.12.1
filterEntryAn entry in filterTable.
FilterEntry
.1.3.6.1.4.1.890.1.5.8.19.12.1.1
filterNamerw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.12.1.1.1
filterMacAddr
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.12.1.1.2
filterVid
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.12.1.1.3
filterRowStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.12.1.1.4
mirrorSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.13
mirrorStaterw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.13.1
mirrorMonitorPortrw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.13.2
mirrorIngActionStaterw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.13.3
mirrorIngMacAddrrw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.13.4
mirrorEgrActionStaterw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.13.5
mirrorEgrMacAddrrw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.13.6
mirrorTable
SEQUENCE OF MirrorEntry
.1.3.6.1.4.1.890.1.5.8.19.13.7
mirrorEntryAn entry in mirrorTable.
MirrorEntry
.1.3.6.1.4.1.890.1.5.8.19.13.7.1
mirrorMirroredStaterw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.13.7.1.1
mirrorDirectionrw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.13.7.1.2
aggrSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.14
aggrStaterw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.14.1
aggrSystemPriorityrw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.14.2
aggrGroupTable
SEQUENCE OF AggrGroupEntry
.1.3.6.1.4.1.890.1.5.8.19.14.3
aggrGroupEntryAn entry in aggrGroupTable.
AggrGroupEntry
.1.3.6.1.4.1.890.1.5.8.19.14.3.1
aggrGroupIndexro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.14.3.1.1
aggrGroupStaterw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.14.3.1.2
aggrGroupDynamicStaterw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.14.3.1.3
aggrPortTable
SEQUENCE OF AggrPortEntry
.1.3.6.1.4.1.890.1.5.8.19.14.4
aggrPortEntryAn entry in aggrPortTable.
AggrPortEntry
.1.3.6.1.4.1.890.1.5.8.19.14.4.1
aggrPortGrouprw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.14.4.1.1
aggrPortDynamicStateTimeoutrw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.14.4.1.2
accessCtlSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.15
accessCtlTable
SEQUENCE OF AccessCtlEntry
.1.3.6.1.4.1.890.1.5.8.19.15.1
accessCtlEntryAn entry in accessCtlTable.
AccessCtlEntry
.1.3.6.1.4.1.890.1.5.8.19.15.1.1
accessCtlServicero
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.15.1.1.1
accessCtlEnablerw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.15.1.1.2
accessCtlServicePortrw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.15.1.1.3
accessCtlTimeoutrw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.15.1.1.4
securedClientTable
SEQUENCE OF SecuredClientEntry
.1.3.6.1.4.1.890.1.5.8.19.15.2
securedClientEntryAn entry in securedClientTable.
SecuredClientEntry
.1.3.6.1.4.1.890.1.5.8.19.15.2.1
securedClientIndexro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.15.2.1.1
securedClientEnablerw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.15.2.1.2
securedClientStartIprw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.15.2.1.3
securedClientEndIprw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.15.2.1.4
securedClientServicerw
Bits
.1.3.6.1.4.1.890.1.5.8.19.15.2.1.5
queuingMethodSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.16
queuingMethodTyperw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.16.1
queuingMethodTable
SEQUENCE OF QueuingMethodEntry
.1.3.6.1.4.1.890.1.5.8.19.16.2
queuingMethodEntryAn entry in queuingMethodTable.
QueuingMethodEntry
.1.3.6.1.4.1.890.1.5.8.19.16.2.1
queuingMethodQueue0...3ro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.16.2.1.1
queuingMethodWeight1...15rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.16.2.1.2
staticRouteSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.17
maxNumberOfStaticRoutesro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.17.1
staticRouteTable
SEQUENCE OF StaticRouteEntry
.1.3.6.1.4.1.890.1.5.8.19.17.2
staticRouteEntryAn entry in staticRouteTable.
StaticRouteEntry
.1.3.6.1.4.1.890.1.5.8.19.17.2.1
staticRouteNamerw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.17.2.1.1
staticRouteIp
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.17.2.1.2
staticRouteMask
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.17.2.1.3
staticRouteGatewayrw
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.17.2.1.4
staticRouteMetricrw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.17.2.1.5
staticRouteRowStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.17.2.1.6
arpInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.18
arpTable
SEQUENCE OF ArpEntry
.1.3.6.1.4.1.890.1.5.8.19.18.1
arpEntryAn entry in arpTable.
ArpEntry
.1.3.6.1.4.1.890.1.5.8.19.18.1.1
arpIndexro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.18.1.1.1
arpIpAddrro
IpAddress
.1.3.6.1.4.1.890.1.5.8.19.18.1.1.2
arpMacAddrro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.18.1.1.3
arpMacVidro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.18.1.1.4
arpTypero
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.18.1.1.5
portOpModeSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.19
portOpModePortTable
SEQUENCE OF PortOpModePortEntry
.1.3.6.1.4.1.890.1.5.8.19.19.1
portOpModePortEntryAn entry in portOpModePortTable.
PortOpModePortEntry
.1.3.6.1.4.1.890.1.5.8.19.19.1.1
portOpModePortSpeedDuplexrw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.19.1.1.1
portOpModePortFlowCntlrw
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.19.1.1.2
portOpModePortNamerw
OCTET STRING
.1.3.6.1.4.1.890.1.5.8.19.19.1.1.3
portOpModePortModuleTypero
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.19.1.1.4
portOpModePortLinkUpTypero
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.19.1.1.5
portOpModePortIntrusionLockrw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.19.1.1.6
portOpModePortLBTestStatusThis entry display latest loopback test status of port while performing loopback test.ro
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.19.1.1.7
portBasedVlanSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.20
portBasedVlanPortListTable
SEQUENCE OF PortBasedVlanPortListEntry
.1.3.6.1.4.1.890.1.5.8.19.20.1
portBasedVlanPortListEntryAn entry in portBasedVlanPortListTable.
PortBasedVlanPortListEntry
.1.3.6.1.4.1.890.1.5.8.19.20.1.1
portBasedVlanPortListMembersrw
PortList (Q-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.20.1.1.1
diffservSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.21
diffservStaterw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.21.1
diffservMapTable
SEQUENCE OF DiffservMapEntry
.1.3.6.1.4.1.890.1.5.8.19.21.2
diffservMapEntryAn entry in diffservMapTable.
DiffservMapEntry
.1.3.6.1.4.1.890.1.5.8.19.21.2.1
diffservMapDscp0-63ro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.21.2.1.1
diffservMapPriority0-7rw
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.21.2.1.2
diffservPortTable
SEQUENCE OF DiffservPortEntry
.1.3.6.1.4.1.890.1.5.8.19.21.3
diffservPortEntryAn entry in diffservPortTable.
DiffservPortEntry
.1.3.6.1.4.1.890.1.5.8.19.21.3.1
diffservPortStaterw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.890.1.5.8.19.21.3.1.1
clusterSetup
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.22
clusterManager
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.22.1
clusterMaxNumOfManagerro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.22.1.1
clusterManagerTable
SEQUENCE OF ClusterManagerEntry
.1.3.6.1.4.1.890.1.5.8.19.22.1.2
clusterManagerEntryAn entry in clusterManagerTable.
ClusterManagerEntry
.1.3.6.1.4.1.890.1.5.8.19.22.1.2.1
clusterManagerVidro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.22.1.2.1.1
clusterManagerNamerw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.1.2.1.2
clusterManagerRowStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.1.2.1.3
clusterMembers
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.22.2
clusterMaxNumOfMemberro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.22.2.1
clusterMemberTable
SEQUENCE OF ClusterMemberEntry
.1.3.6.1.4.1.890.1.5.8.19.22.2.2
clusterMemberEntryAn entry in clusterMemberTable.
ClusterMemberEntry
.1.3.6.1.4.1.890.1.5.8.19.22.2.2.1
clusterMemberMacro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.2.2.1.1
clusterMemberNamero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.2.2.1.2
clusterMemberModelro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.2.2.1.3
clusterMemberPasswordrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.2.2.1.4
clusterMemberRowStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.2.2.1.5
clusterCandidates
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.22.3
clusterCandidateTable
SEQUENCE OF ClusterCandidateEntry
.1.3.6.1.4.1.890.1.5.8.19.22.3.1
clusterCandidateEntryAn entry in clusterCandidateTable.
ClusterCandidateEntry
.1.3.6.1.4.1.890.1.5.8.19.22.3.1.1
clusterCandidateMacro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.3.1.1.1
clusterCandidateNamero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.3.1.1.2
clusterCandidateModelro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.3.1.1.3
clusterStatus
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.22.4
clusterStatusRolero
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.22.4.1
clusterStatusManagerro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.4.2
clsuterStatusMaxNumOfMemberro
INTEGER
.1.3.6.1.4.1.890.1.5.8.19.22.4.3
clusterStatusMemberTable
SEQUENCE OF ClusterStatusMemberEntry
.1.3.6.1.4.1.890.1.5.8.19.22.4.4
clusterStatusMemberEntryAn entry in clusterStatusMemberTable.
ClusterStatusMemberEntry
.1.3.6.1.4.1.890.1.5.8.19.22.4.4.1
clusterStatusMemberMacro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.4.4.1.1
clusterStatusMemberNamero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.4.4.1.2
clusterStatusMemberModelro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.22.4.4.1.3
clusterStatusMemberStatusro
Enumeration
.1.3.6.1.4.1.890.1.5.8.19.22.4.4.1.4
faultMIBFault event table definitions
MODULE-IDENTITY
.1.3.6.1.4.1.890.1.5.8.19.26
eventObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.26.1
eventTableA list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault is cleared it is deleted from the event table.
SEQUENCE OF EventEntry
.1.3.6.1.4.1.890.1.5.8.19.26.1.1
eventEntryAn entry containing information about an event in the event table.
EventEntry
.1.3.6.1.4.1.890.1.5.8.19.26.1.1.1
eventSeqNumThis variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is incremented when - the state of a normal type fault is set on (the same sequence number is present in the events table as well as in the trap that is sent to notify about the fault on event) - delta event occurs (sequence number present in trap message) - the state of a normal type fault is set off (sequence number present in trap that is sent to notify for clearing).ro
Integer32
.1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.1
eventEventIdThis variable represents the event ID which uniquely identifies the event in the entire system.ro
EventIdNumber
.1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.2
eventNameThis variable represents the name of the event, for example 'Ethernet Link Down'ro
DisplayString
.1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.3
eventInstanceTypeThis variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For more details see the textual conventions section. AFFECTS: eventInstanceId, eventInstanceNamero
InstanceType
.1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.4
eventInstanceIdThis variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceTypero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.5
eventInstanceNameThis variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstanceTypero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.6
eventSeverityThis variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention to prevent/reduce system down time. Major events require quick attention and Minor events possibly require some attention. Informational events indicate the occurrence of events that may need to be investigated.ro
EventSeverity
.1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.7
eventSetTimeThis table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM.ro
UtcTimeStamp
.1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.8
eventDescriptionThis variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no usefull information to report. The maximum length of this string is 255 characters.ro
DisplayString
.1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.9
eventServAffectiveThis variable indicates whether the event is service affective or notro
EventServiceAffective
.1.3.6.1.4.1.890.1.5.8.19.26.1.1.1.10
faultTrapsMIBFault event trap definitions
MODULE-IDENTITY
.1.3.6.1.4.1.890.1.5.8.19.27
trapInfoObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.27.1
trapRefSeqNumIndicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications.ro
Integer32
.1.3.6.1.4.1.890.1.5.8.19.27.1.1
trapPersistenceIndicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap notifications.ro
EventPersistence
.1.3.6.1.4.1.890.1.5.8.19.27.1.2
trapSenderNodeIdRepresents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications.ro
Integer32
.1.3.6.1.4.1.890.1.5.8.19.27.1.3
trapNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.890.1.5.8.19.27.2
eventOnTrapThis trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not automatically cleared) state has been set on. Objects are used as follows: - eventSeqNum is the sequence number of the event. For normal type of events must equal to the sequence number of the event in the events table. - eventEventId specifies what fault event has occured. - eventName specifies the name of the fault event. - eventSetTime indicates when fault event has occured (delta events) or when fault has been set on (normal events). - eventSeverity reports the severity level of the event. - eventInstanceType indicates what kind of object is faulty. - eventInstanceId specifies what instance is faulty. - eventInstanceName may contain textual description for the faulty object. - eventServAffective specifies whether the event is immediately service affcetive. - eventDescription reports possible additional information about the event. - trapPersistence tells whether this event is a delta or normal event. - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the fault event. For more information see the eventTable specification
NOTIFICATION-TYPE
.1.3.6.1.4.1.890.1.5.8.19.27.2.1
eventClearedTrapThis trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqNum is the sequence number of the this clearing event. Note that the sequence number of the cleared event is reported in the trapRefSeqNum object. - eventEventId specifies what event has been cleared. - eventSetTime indicates when fault event has been cleared. - eventInstanceType indicates what kind of object has been faulty. - eventInstanceId specifies what instance has been faulty. - trapRefSeqNum specifies the sequence number of the cleared event (i.e. the sequence number was assigned for the event in the events table). - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the clearing event. For more information see the eventTable specification
NOTIFICATION-TYPE
.1.3.6.1.4.1.890.1.5.8.19.27.2.2
ZYXEL-ES2108G-MIB - SNMP MIB Reference | MIBs Explorer