WebGraph-Thermometer-US-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for WebGraph-Thermometer-US-MIB.
191
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
191 total| Object Name |
|---|
wut OBJECT IDENTIFIER .1.3.6.1.4.1.5040 |
IMPORTS Unknown .1.3.6.1.4.1.5040 |
wtComServer OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1 |
wtWebio OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2 |
wtWebioAn1Graph OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8 |
wtWebioAn1GraphAlert1This SNMP trap is generated when Alarm 1 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.31 |
wtWebioAn1GraphAlert2This SNMP trap is generated when Alarm 2 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.32 |
wtWebioAn1GraphAlert3This SNMP trap is generated when Alarm 3 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.33 |
wtWebioAn1GraphAlert4This SNMP trap is generated when Alarm 4 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.34 |
wtWebioAn1GraphAlert5This SNMP trap is generated when Alarm 5 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.35 |
wtWebioAn1GraphAlert6This SNMP trap is generated when Alarm 6 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.36 |
wtWebioAn1GraphAlert7This SNMP trap is generated when Alarm 7 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.37 |
wtWebioAn1GraphAlert8This SNMP trap is generated when Alarm 8 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.38 |
wtWebioAn1GraphAlert9This SNMP trap is generated when Alarm 1 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.91 |
wtWebioAn1GraphAlert10This SNMP trap is generated when Alarm 2 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.92 |
wtWebioAn1GraphAlert11This SNMP trap is generated when Alarm 3 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.93 |
wtWebioAn1GraphAlert12This SNMP trap is generated when Alarm 4 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.94 |
wtWebioAn1GraphAlert13This SNMP trap is generated when Alarm 5 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.95 |
wtWebioAn1GraphAlert14This SNMP trap is generated when Alarm 6 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.96 |
wtWebioAn1GraphAlert15This SNMP trap is generated when Alarm 7 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.97 |
wtWebioAn1GraphAlert16This SNMP trap is generated when Alarm 8 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.98 |
wtWebioAn1GraphAlertDiagThis SNMP trap is generated when a diagnosis/error message was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.8.0.110 |
wtWebioAn1GraphTemp OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.1 |
wtWebioAn1GraphSensorsNumber of temperature sensorsro INTEGER .1.3.6.1.4.1.5040.1.2.8.1.1 |
wtWebioAn1GraphSensorTableList of sensors. SEQUENCE OF WtWebioAn1GraphSensorEntry .1.3.6.1.4.1.5040.1.2.8.1.2 |
wtWebioAn1GraphSensorEntryTemperature sensor numbers. WtWebioAn1GraphSensorEntry .1.3.6.1.4.1.5040.1.2.8.1.2.1 |
wtWebioAn1GraphSensorNoTemperature sensor number.ro INTEGER (1) .1.3.6.1.4.1.5040.1.2.8.1.2.1.1 |
wtWebioAn1GraphTempValueTableList of temperature values corresponding to the channel numbers. SEQUENCE OF WtWebioAn1GraphTempValueEntry .1.3.6.1.4.1.5040.1.2.8.1.3 |
wtWebioAn1GraphTempValueEntryTemperatures of the sensors. WtWebioAn1GraphTempValueEntry .1.3.6.1.4.1.5040.1.2.8.1.3.1 |
wtWebioAn1GraphTempValueTemperature value of the sensor, ASCII, 5 characters in length.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.8.1.3.1.1 |
wtWebioAn1GraphBinaryTempValueTableList of binary temperature values corresponding to the channel numbers. SEQUENCE OF WtWebioAn1GraphBinaryTempValueEntry .1.3.6.1.4.1.5040.1.2.8.1.4 |
wtWebioAn1GraphBinaryTempValueEntryBinary temperature values of the sensors. WtWebioAn1GraphBinaryTempValueEntry .1.3.6.1.4.1.5040.1.2.8.1.4.1 |
wtWebioAn1GraphBinaryTempValueBinary temperature value of the sensor in 1/10 degrees Celsius,
signed number, 0x7FFF indicates an
invalid measured value.ro INTEGER .1.3.6.1.4.1.5040.1.2.8.1.4.1.1 |
wtWebioAn1GraphSessCntrl OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.2 |
wtWebioAn1GraphSessCntrlPasswordEntering this password opens a session which is ended by writing a 1 to
wtWebioAn1GraphSessCntrlLogout. When read this variable provides a string of
length zero.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.2.1 |
wtWebioAn1GraphSessCntrlConfigModeWhen the device is in SNMP configuration mode, the value 1 is
returned, otherwise 0. If the read value is 0 even though the
password was written, the device is already in config mode and the
variables can only be read.ro Enumeration .1.3.6.1.4.1.5040.1.2.8.2.2 |
wtWebioAn1GraphSessCntrlLogoutIf the device is in configuration mode and the session was opened by
this SNMP Manager, writing a 1 to this variable will end the session
and all parameters are stored.
Writing a 2 discards all entries again.
When read this variable provides the value 0.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.2.3 |
wtWebioAn1GraphSessCntrlAdminPasswordThis password protects access to the variables with administrator rights.
It can only be changed by the administrator. If no password was assigned,
the valid password is public.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.2.4 |
wtWebioAn1GraphSessCntrlConfigPasswordThis password protects access to the variables with configurator rights. It can
be changed by the administrator and by the configurator. If no password was assigned,
the valid password is public. When read this variable provides a null-pointer.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.2.5 |
wtWebioAn1GraphConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3 |
wtWebioAn1GraphDevice OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1 |
wtWebioAn1GraphText OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.1 |
wtWebioAn1GraphDeviceNameName of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.1.1 |
wtWebioAn1GraphDeviceTextDescription of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.1.2 |
wtWebioAn1GraphDeviceLocationDescription of the location of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.1.3 |
wtWebioAn1GraphDeviceContactContact address of the system operator of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.1.4 |
wtWebioAn1GraphTimeDate OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.2 |
wtWebioAn1GraphTimeZone OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.2.1 |
wtWebioAn1GraphTzOffsetHrsOffset hours for the time zone (winter time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.1 |
wtWebioAn1GraphTzOffsetMinOffset minutes for the time zone (winter time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.2 |
wtWebioAn1GraphTzEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Timezonerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.3 |
wtWebioAn1GraphStTzOffsetHrsOffset hours of the time zone (summer time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.4 |
wtWebioAn1GraphStTzOffsetMinOffset minutes of the time zone (summer time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.5 |
wtWebioAn1GraphStTzEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Summertimerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.6 |
wtWebioAn1GraphStTzStartMonthMonth in which the change is made from winter time to summer time.rw Enumeration .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.7 |
wtWebioAn1GraphStTzStartModeMode of the day of the week for which the change is made from winter time to summer time.rw Enumeration .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.8 |
wtWebioAn1GraphStTzStartWdayDay of the week on which the change is made from winter time to summer timerw Enumeration .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.9 |
wtWebioAn1GraphStTzStartHrsHour in which the time zone is changed from winter to summer time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.10 |
wtWebioAn1GraphStTzStartMinMinute in which the time zone is changed from winter to summer time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.11 |
wtWebioAn1GraphStTzStopMonthMonth in which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.12 |
wtWebioAn1GraphStTzStopModeMode of the week day on which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.13 |
wtWebioAn1GraphStTzStopWdayDay of the week on which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.14 |
wtWebioAn1GraphStTzStopHrsHour at which the time zone is changed from summer to winter time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.15 |
wtWebioAn1GraphStTzStopMinMinute at which the time zone is changed from summer to winter time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.1.16 |
wtWebioAn1GraphTimeServer OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.2.2 |
wtWebioAn1GraphTimeServer1IP address or name of the 1st time server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.2.2.1 |
wtWebioAn1GraphTimeServer2IP address or name of the 2nd time server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.2.2.2 |
wtWebioAn1GraphTsEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Time Serverrw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.2.2.3 |
wtWebioAn1GraphTsSyncTimeDaily synchronisation time with the time server (hour: 0-23).rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.2.4 |
wtWebioAn1GraphDeviceClock OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.2.3 |
wtWebioAn1GraphClockHrsClock hours taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.3.1 |
wtWebioAn1GraphClockMinClock minutes taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.3.2 |
wtWebioAn1GraphClockDayDate: Day of the month, taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.3.3 |
wtWebioAn1GraphClockMonthDate: Month, taking into account the time zone settings.rw Enumeration .1.3.6.1.4.1.5040.1.2.8.3.1.2.3.4 |
wtWebioAn1GraphClockYearDate: Year, taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.2.3.5 |
wtWebioAn1GraphBasic OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.3 |
wtWebioAn1GraphNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.3.1 |
wtWebioAn1GraphIpAddressIP address of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.8.3.1.3.1.1 |
wtWebioAn1GraphSubnetMaskSubnet mask of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.8.3.1.3.1.2 |
wtWebioAn1GraphGatewayGateway of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.8.3.1.3.1.3 |
wtWebioAn1GraphDnsServer1IP address of the 1st DNS server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.1.4 |
wtWebioAn1GraphDnsServer2IP address of the 2nd DNS server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.1.5 |
wtWebioAn1GraphAddConfigAdditional configuration (1=ON):
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: BOOTP disablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.1.6 |
wtWebioAn1GraphHTML OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.3.2 |
wtWebioAn1GraphMail OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.3.3 |
wtWebioAn1GraphMailAdNameDevice name for mail administration.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.3.1 |
wtWebioAn1GraphMailReplyReply address for the mail server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.3.2 |
wtWebioAn1GraphMailServerName or IP address of the mail server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.3.3 |
wtWebioAn1MailEnableSet this bit to enable the sending of mails:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Mail enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.3.4 |
wtWebioAn1GraphMailAuthenticationSelection of the authentication modi:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : POP3 before SMTP
Bit 1 : ESMTP, authentication
Bit 0 : SMTP, no authenticationrw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.3.5 |
wtWebioAn1GraphMailAuthUserName of the user to be authenticated.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.3.6 |
wtWebioAn1GraphMailAuthPasswordAuthentication password.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.3.7 |
wtWebioAn1GraphMailPop3ServerName or Ip-address of the POP3 Servers.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.3.8 |
wtWebioAn1GraphSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.3.4 |
wtWebioAn1GraphSnmpCommunityStringReadCommunity string read onlyrw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.4.1 |
wtWebioAn1GraphSnmpCommunityStringReadWriteCommunity string read / writerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.4.2 |
wtWebioAn1GraphSystemTrapManagerIPName or IP address of the TCP server which accepts the system trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.4.3 |
wtWebioAn1GraphSystemTrapEnableBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: ColdStart
Bit 1: WarmStart
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.4.4 |
wtWebioAn1GraphSnmpEnableSet bit 0 to enable SNMP.
If disabled, the device did not respond to any SNMP requests.
Bit 1 decided wether the community string of read operations
is compared with the system password or not:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : SNMP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.4.5 |
wtWebioAn1GraphSnmpCommunityStringTrapCommunity string of the traps.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.4.6 |
wtWebioAn1GraphUDP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.3.5 |
wtWebioAn1GraphUdpPortUdp port to which the Udp queries ( short form GET requests) can be sent. This
port number must be unique within the device.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.3.5.1 |
wtWebioAn1GraphUdpEnableSet this bit to enable UDP support:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : UDP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.5.2 |
wtWebioAn1GraphSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.3.6 |
wtWebioAn1GraphSyslogServerIPName or IP address of the Syslog server, which accepts the Syslog messgaes.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.6.1 |
wtWebioAn1GraphSyslogServerPortPortnumber of the Syslog servers, default 514.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.3.6.2 |
wtWebioAn1GraphSyslogSystemMessagesEnableBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: ColdStart
Bit 1: WarmStart
Bit 2: Diag Messages
Bit 3-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.6.3 |
wtWebioAn1GraphSyslogEnableSet bit 0 to enable Syslog:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Syslog enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.6.4 |
wtWebioAn1GraphFTP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.3.7 |
wtWebioAn1GraphFTPServerIPName or IP address of the FTP server, which accepts the FTP messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.7.1 |
wtWebioAn1GraphFTPServerControlPortPortnumber of the control port of the FTP server, default 21.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.3.7.2 |
wtWebioAn1GraphFTPUserNameFTP Loggin: user name.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.7.3 |
wtWebioAn1GraphFTPPasswordFTP Loggin: user password.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.7.4 |
wtWebioAn1GraphFTPAccountFTP Loggin: name of account.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.7.5 |
wtWebioAn1GraphFTPOptionBit 0 switches the FTP Server in Passiv-Mode,
the Client controls the data connection on its own:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : PASV enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.7.6 |
wtWebioAn1GraphFTPEnableSet Bit 0 to enable FTP:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : FTP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.7.7 |
wtWebioAn1GraphHTTP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.3.8 |
wtWebioAn1GraphStartupBinary coded start page:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1: Index.htm
Bit 2: Home.htm
Bit 3: User.htm
Only one page may be selected at a time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.8.1 |
wtWebioAn1GraphGetHeaderEnableIf this bit is set, every answer of a short form GET question will be lead
by the IP-address and name of the device:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : GET Header enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.3.8.2 |
wtWebioAn1GraphHttpPortDefinition of the standard HTML port (Default: 80).rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.3.8.3 |
wtWebioAn1GraphDatalogger OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.4 |
wtWebioAn1GraphLoggerTimebaseTime base of the data loggerrw Enumeration .1.3.6.1.4.1.5040.1.2.8.3.1.4.1 |
wtWebioAn1GraphLoggerSensorSelBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2: Sensor 3
Bit 3: Sensor 4
Bit 4: Sensor 5
Bit 5: Sensor 6
Bit 6: Sensor 7
Bit 7: Sensor 8rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.4.2 |
wtWebioAn1GraphDisplaySensorSelBinary coded sensor selection:
only selected sensors will be shown in the graphical presentation:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2: Sensor 3
Bit 3: Sensor 4
Bit 4: Sensor 5
Bit 5: Sensor 6
Bit 6: Sensor 7
Bit 7: Sensor 8rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.4.3 |
wtWebioAn1GraphSensorColorTableList of sensor colors for the praphical presentation. SEQUENCE OF WtWebioAn1GraphSensorColorEntry .1.3.6.1.4.1.5040.1.2.8.3.1.4.4 |
wtWebioAn1GraphSensorColorEntryIndex numbers of the sensors. WtWebioAn1GraphSensorColorEntry .1.3.6.1.4.1.5040.1.2.8.3.1.4.4.1 |
wtWebioAn1GraphSensorColorColor of the sensors at the praphical presention.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.4.4.1.1 |
wtWebioAn1GraphAutoScaleEnableIf bit 0 is set, vertical auto scale is enabled:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Auto Scale enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.4.5 |
wtWebioAn1GraphVerticalUpperLimitThis value defines the maximum temperature shown in the graphical presentation,
if no auto scaling is selected.
Temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.4.6 |
wtWebioAn1GraphVerticalLowerLimitThis value defines the minimum temperature shown in the graphical presentation,
if no auto scaling is selected.
Temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.4.7 |
wtWebioAn1GraphHorizontalZoomDefines the default zoom stage, if no auto scaling is selected.rw Enumeration .1.3.6.1.4.1.5040.1.2.8.3.1.4.8 |
wtWebioAn1GraphAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.1.5 |
wtWebioAn1GraphAlarmCountNumber of independent alarms.ro INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.5.1 |
wtWebioAn1GraphAlarmIfTableList of alarm indices. SEQUENCE OF WtWebioAn1GraphAlarmIfEntry .1.3.6.1.4.1.5040.1.2.8.3.1.5.2 |
wtWebioAn1GraphAlarmIfEntryNumbers of the alarms. WtWebioAn1GraphAlarmIfEntry .1.3.6.1.4.1.5040.1.2.8.3.1.5.2.1 |
wtWebioAn1GraphAlarmNoAlarm number.ro INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.5.2.1.1 |
wtWebioAn1GraphAlarmTableList of settings depending on the alarm number. SEQUENCE OF WtWebioAn1GraphAlarmEntry .1.3.6.1.4.1.5040.1.2.8.3.1.5.3 |
wtWebioAn1GraphAlarmEntryAlarm parameters of the individual alarms. WtWebioAn1GraphAlarmEntry .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1 |
wtWebioAn1GraphAlarmTriggerBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3:
Bit 0: Timer
Bit 1: ColdStart
Bit 2: WarmStart
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2: Sensor 3
Bit 3: Sensor 4
Bit 4: Sensor 5
Bit 5: Sensor 6
Bit 6: Sensor 7
Bit 7: Sensor 8rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.1 |
wtWebioAn1GraphAlarmMinMinimum temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.2 |
wtWebioAn1GraphAlarmMaxMaximum temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.3 |
wtWebioAn1GraphAlarmHysteresisTemperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.)
, in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.4 |
wtWebioAn1GraphAlarmDelayAlarm will be delayed by setting this time while stable alarm
condition occur (time in minutes).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.5 |
wtWebioAn1GraphAlarmIntervalSend interval for alarm messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.6 |
wtWebioAn1GraphAlarmEnableBinary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Mail Enable
Bit 1: SNMP Trap enable
Bit 2: TCP Client enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.7 |
wtWebioAn1GraphAlarmEMailAddrE-Mail address for sending the alarm mail to.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.8 |
wtWebioAn1GraphAlarmMailSubjectSubject line for alarm mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.9 |
wtWebioAn1GraphAlarmMailTextAlarm mail text: <Tn> provides the current temperature; n = 1..8.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.10 |
wtWebioAn1GraphAlarmManagerIPName or IP address of the SNMP Manager which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.11 |
wtWebioAn1GraphAlarmTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.12 |
wtWebioAn1GraphAlarmMailOptionsBinary coded options:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Attach Thermo.csv Enable
Bit 1-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.13 |
wtWebioAn1GraphAlarmTcpIpAddrName or IP address of the TCP server which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.14 |
wtWebioAn1GraphAlarmTcpPortPort number of the TCP server which accepts the trap.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.15 |
wtWebioAn1GraphAlarmTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.16 |
wtWebioAn1GraphAlarmClearMailSubjectSubject line for alarm clear mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.17 |
wtWebioAn1GraphAlarmClearMailTextAlarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.18 |
wtWebioAn1GraphAlarmClearTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.19 |
wtWebioAn1GraphAlarmClearTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.20 |
wtWebioAn1GraphAlarmSyslogIpAddrIP address of the syslog server to which the Webio device should send syslog messages.rw IpAddress .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.21 |
wtWebioAn1GraphAlarmSyslogPortPort number of the syslog server to which the Webio device should send syslog messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.22 |
wtWebioAn1GraphAlarmSyslogTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.23 |
wtWebioAn1GraphAlarmSyslogClearTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.24 |
wtWebioAn1GraphAlarmFtpDataPortLocal data port: 1..65535 or AUTO: the next free port will be assigned.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.25 |
wtWebioAn1GraphAlarmFtpFileNameName of the file including path informations.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.26 |
wtWebioAn1GraphAlarmFtpTextMessage text to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.27 |
wtWebioAn1GraphAlarmFtpClearTextAlarm clear message to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.28 |
wtWebioAn1GraphAlarmFtpOptionsBinary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : STORE
Bit 1 : APPEND
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.29 |
wtWebioAn1GraphAlarmTimerCronThis entry contains 5 text fields space or tab seperated for time trigger definition.
Each field must match with the actual time to trigger a message, weekday and day of month
are interpreted separately.
1: Minutes Range 0-59
2. Hours Range 0-23, 0 is midnight
3: Day of month Range 1-31
4: Month Range 1-12
5: Weekday Range 0-6, 0 is sunday
Syntax for every field:
- an asterix (*) enables every possible setting of a field
- single numbers seperated by commas
- a partition within the allowed range (1-5)
- step size within an partition of the allowed range (0-59/2: every second minute).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.30 |
wtWebioAn1GraphPorts OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.2 |
wtWebioAn1GraphPortTableList of settings depending on the sensor number. SEQUENCE OF WtWebioAn1GraphPortEntry .1.3.6.1.4.1.5040.1.2.8.3.2.1 |
wtWebioAn1GraphPortEntrySensor parameters for the individual sensors. WtWebioAn1GraphPortEntry .1.3.6.1.4.1.5040.1.2.8.3.2.1.1 |
wtWebioAn1GraphPortNameName of the sensor.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.2.1.1.1 |
wtWebioAn1GraphPortTextDescription of the sensor.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.2.1.1.2 |
wtWebioAn1GraphPortOffset1Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.2.1.1.3 |
wtWebioAn1GraphPortTemperature1Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.2.1.1.4 |
wtWebioAn1GraphPortOffset2Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.2.1.1.5 |
wtWebioAn1GraphPortTemperature2Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.2.1.1.6 |
wtWebioAn1GraphPortCommentOffset calibration: informations of date, name of operator, reference devices.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.2.1.1.7 |
wtWebioAn1GraphManufact OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.3 |
wtWebioAn1GraphMfNameManufacturer company namerw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.3.1 |
wtWebioAn1GraphMfAddrManufacturer address.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.3.2 |
wtWebioAn1GraphMfHotlineManufacturer hotline.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.3.3 |
wtWebioAn1GraphMfInternetManufacturer Internet address.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.3.4 |
wtWebioAn1GraphMfDeviceTypManufacturer device name (model number).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.3.5 |
wtWebioAn1GraphMfOrderNoManufacturer part number.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.3.6 |
wtWebioAn1GraphDiag OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.8.3.4 |
wtWebioAn1GraphDiagErrorCountNumber of entries in the error memory.ro INTEGER .1.3.6.1.4.1.5040.1.2.8.3.4.1 |
wtWebioAn1GraphDiagBinaryErrorError causes coded bit-by-bit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.4.2 |
wtWebioAn1GraphDiagErrorIndexThe value of this variable is used as an index to read
an error massege from wtWebioAn1GraphDiagErrorMessage.
Errors are numbered from 1 to wtWebioAn1GraphDiagErrorCount.
Writing a valid value into this variable, making the appropriate
message readable from wtWebioAn1GraphDiagErrorMessage.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.4.3 |
wtWebioAn1GraphDiagErrorMessageUsing wtWebioAn1GraphDiagErrorIndex as an index, the appropriate message is available.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.8.3.4.4 |
wtWebioAn1GraphDiagErrorClearWriting 1 into this variable clears all diagnosis messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.8.3.4.5 |