WebGraph-AnalogIO-57661-US-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for WebGraph-AnalogIO-57661-US-MIB.
293
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
293 total| Object Name |
|---|
wut OBJECT IDENTIFIER .1.3.6.1.4.1.5040 |
IMPORTS Unknown .1.3.6.1.4.1.5040 |
wtComServer OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1 |
wtWebio OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2 |
wtWebGraphAnalog57661 OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28 |
wtWebGraphAnalog57661Alert1This SNMP trap is generated when Alarm 1 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.31 |
wtWebGraphAnalog57661Alert2This SNMP trap is generated when Alarm 2 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.32 |
wtWebGraphAnalog57661Alert3This SNMP trap is generated when Alarm 3 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.33 |
wtWebGraphAnalog57661Alert4This SNMP trap is generated when Alarm 4 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.34 |
wtWebGraphAnalog57661Alert5This SNMP trap is generated when Alarm 5 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.35 |
wtWebGraphAnalog57661Alert6This SNMP trap is generated when Alarm 6 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.36 |
wtWebGraphAnalog57661Alert7This SNMP trap is generated when Alarm 7 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.37 |
wtWebGraphAnalog57661Alert8This SNMP trap is generated when Alarm 8 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.38 |
wtWebGraphAnalog57661AlertReportThis SNMP trap is generated when the report was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.39 |
wtWebGraphAnalog57661Alert9This SNMP trap is generated when Alarm 1 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.91 |
wtWebGraphAnalog57661Alert10This SNMP trap is generated when Alarm 2 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.92 |
wtWebGraphAnalog57661Alert11This SNMP trap is generated when Alarm 3 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.93 |
wtWebGraphAnalog57661Alert12This SNMP trap is generated when Alarm 4 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.94 |
wtWebGraphAnalog57661Alert13This SNMP trap is generated when Alarm 5 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.95 |
wtWebGraphAnalog57661Alert14This SNMP trap is generated when Alarm 6 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.96 |
wtWebGraphAnalog57661Alert15This SNMP trap is generated when Alarm 7 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.97 |
wtWebGraphAnalog57661Alert16This SNMP trap is generated when Alarm 8 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.98 |
wtWebGraphAnalog57661AlertDiagThis SNMP trap is generated when a diagnosis/error message was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.28.0.110 |
wtWebGraphAnalog57661Inventory OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.1 |
wtWebGraphAnalog57661SensorsNumber of sensorsro INTEGER .1.3.6.1.4.1.5040.1.2.28.1.1 |
wtWebGraphAnalog57661SensorTableList of sensors. SEQUENCE OF WtWebGraphAnalog57661SensorEntry .1.3.6.1.4.1.5040.1.2.28.1.2 |
wtWebGraphAnalog57661SensorEntryList of sensor numbers. WtWebGraphAnalog57661SensorEntry .1.3.6.1.4.1.5040.1.2.28.1.2.1 |
wtWebGraphAnalog57661SensorNoSensor number.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.1.2.1.1 |
wtWebGraphAnalog57661ValuesTableList of measurement values corresponding to the channel numbers. SEQUENCE OF WtWebGraphAnalog57661ValuesEntry .1.3.6.1.4.1.5040.1.2.28.1.3 |
wtWebGraphAnalog57661ValuesEntryMeasurement values of the sensors. WtWebGraphAnalog57661ValuesEntry .1.3.6.1.4.1.5040.1.2.28.1.3.1 |
wtWebGraphAnalog57661ValuesMeasurement value of the sensor, ASCII.
This value will be translated according to the ports settings
for the read and write operations.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.1.3.1.1 |
wtWebGraphAnalog57661BinaryValuesTableList of binary measurement values corresponding to the channel numbers. SEQUENCE OF WtWebGraphAnalog57661BinaryValuesEntry .1.3.6.1.4.1.5040.1.2.28.1.4 |
wtWebGraphAnalog57661BinaryValuesEntryBinary measurement values of the sensors. WtWebGraphAnalog57661BinaryValuesEntry .1.3.6.1.4.1.5040.1.2.28.1.4.1 |
wtWebGraphAnalog57661BinaryValuesBinary measurement value of the sensor in 1/1000,
signed number, 0x7FFFFFFF indicates an invalid value.
This value will be translated according to the ports settings
for the read and write operations.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.1.4.1.1 |
wtWebGraphAnalog57661SessCntrl OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.2 |
wtWebGraphAnalog57661SessCntrlPasswordEntering this password opens a session which is ended by writing a 1 to
wtWebGraphAnalog57661SessCntrlLogout. When read this variable provides a string of
length zero.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.2.1 |
wtWebGraphAnalog57661SessCntrlConfigModeWhen the device is in SNMP configuration mode, the value 1 is
returned, otherwise 0. If the read value is 0 even though the
password was written, the device is already in config mode and the
variables can only be read.ro Enumeration .1.3.6.1.4.1.5040.1.2.28.2.2 |
wtWebGraphAnalog57661SessCntrlLogoutIf the device is in configuration mode and the session was opened by
this SNMP Manager, writing a 1 to this variable will end the session
and all parameters are stored.
Writing a 2 discards all entries again.
When read this variable provides the value 0.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.2.3 |
wtWebGraphAnalog57661SessCntrlAdminPasswordThis password protects access to the variables with administrator rights.
It can only be changed by the administrator. If no password was assigned,
the valid password is public.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.2.4 |
wtWebGraphAnalog57661SessCntrlConfigPasswordThis password protects access to the variables with configurator rights. It can
be changed by the administrator and by the configurator. If no password was assigned,
the valid password is public. When read this variable provides a null-pointer.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.2.5 |
wtWebGraphAnalog57661Config OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3 |
wtWebGraphAnalog57661Device OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1 |
wtWebGraphAnalog57661Text OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.1 |
wtWebGraphAnalog57661DeviceNameName of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.1.1 |
wtWebGraphAnalog57661DeviceTextDescription of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.1.2 |
wtWebGraphAnalog57661DeviceLocationDescription of the location of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.1.3 |
wtWebGraphAnalog57661DeviceContactContact address of the system operator of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.1.4 |
wtWebGraphAnalog57661TimeDate OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.2 |
wtWebGraphAnalog57661TimeZone OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.2.1 |
wtWebGraphAnalog57661TzOffsetHrsOffset hours for the time zone (winter time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.1 |
wtWebGraphAnalog57661TzOffsetMinOffset minutes for the time zone (winter time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.2 |
wtWebGraphAnalog57661TzEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Timezonerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.3 |
wtWebGraphAnalog57661StTzOffsetHrsOffset hours of the time zone (summer time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.4 |
wtWebGraphAnalog57661StTzOffsetMinOffset minutes of the time zone (summer time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.5 |
wtWebGraphAnalog57661StTzEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Summertimerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.6 |
wtWebGraphAnalog57661StTzStartMonthMonth in which the change is made from winter time to summer time.rw Enumeration .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.7 |
wtWebGraphAnalog57661StTzStartModeMode of the day of the week for which the change is made from winter time to summer time.rw Enumeration .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.8 |
wtWebGraphAnalog57661StTzStartWdayDay of the week on which the change is made from winter time to summer timerw Enumeration .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.9 |
wtWebGraphAnalog57661StTzStartHrsHour in which the time zone is changed from winter to summer time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.10 |
wtWebGraphAnalog57661StTzStartMinMinute in which the time zone is changed from winter to summer time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.11 |
wtWebGraphAnalog57661StTzStopMonthMonth in which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.12 |
wtWebGraphAnalog57661StTzStopModeMode of the week day on which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.13 |
wtWebGraphAnalog57661StTzStopWdayDay of the week on which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.14 |
wtWebGraphAnalog57661StTzStopHrsHour at which the time zone is changed from summer to winter time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.15 |
wtWebGraphAnalog57661StTzStopMinMinute at which the time zone is changed from summer to winter time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.1.16 |
wtWebGraphAnalog57661TimeServer OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.2.2 |
wtWebGraphAnalog57661TimeServer1IP address or name of the 1st time server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.2.2.1 |
wtWebGraphAnalog57661TimeServer2IP address or name of the 2nd time server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.2.2.2 |
wtWebGraphAnalog57661TsEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Time Serverrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.2.2.3 |
wtWebGraphAnalog57661TsSyncTimeDaily synchronisation time with the time server (hour: 0-23).rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.2.4 |
wtWebGraphAnalog57661DeviceClock OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.2.3 |
wtWebGraphAnalog57661ClockHrsClock hours taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.3.1 |
wtWebGraphAnalog57661ClockMinClock minutes taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.3.2 |
wtWebGraphAnalog57661ClockDayDate: Day of the month, taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.3.3 |
wtWebGraphAnalog57661ClockMonthDate: Month, taking into account the time zone settings.rw Enumeration .1.3.6.1.4.1.5040.1.2.28.3.1.2.3.4 |
wtWebGraphAnalog57661ClockYearDate: Year, taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.2.3.5 |
wtWebGraphAnalog57661Basic OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.3 |
wtWebGraphAnalog57661Network OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.3.1 |
wtWebGraphAnalog57661IpAddressIP address of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.28.3.1.3.1.1 |
wtWebGraphAnalog57661SubnetMaskSubnet mask of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.28.3.1.3.1.2 |
wtWebGraphAnalog57661GatewayGateway of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.28.3.1.3.1.3 |
wtWebGraphAnalog57661DnsServer1IP address of the 1st DNS server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.1.4 |
wtWebGraphAnalog57661DnsServer2IP address of the 2nd DNS server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.1.5 |
wtWebGraphAnalog57661AddConfigAdditional configuration (1=ON):
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1: DHCP disable
Bit 0: BOOTP disablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.1.6 |
wtWebGraphAnalog57661HTTP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.3.2 |
wtWebGraphAnalog57661StartupBinary coded start page:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1: Index.htm
Bit 2: Home.htm
Bit 3: User.htm
Only one page may be selected at a time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.2.1 |
wtWebGraphAnalog57661GetHeaderEnableIf these bits are set, every answer of a short form GET question will be lead
by the IP-address and name of the device and/or a HTTP header:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-6: unused
Bit 1 : GET HTTP enable
Bit 0 : GET Header enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.2.2 |
wtWebGraphAnalog57661HttpPortDefinition of the standard HTML port (Default: 80).rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.2.3 |
wtWebGraphAnalog57661Mail OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.3.3 |
wtWebGraphAnalog57661MailAdNameDevice name for mail administration.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.3.1 |
wtWebGraphAnalog57661MailReplyReply address for the mail server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.3.2 |
wtWebGraphAnalog57661MailServerName or IP address of the mail server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.3.3 |
wtWebioAn1MailEnableSet this bit to enable the sending of mails:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Mail enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.3.4 |
wtWebGraphAnalog57661MailAuthenticationSelection of the authentication modi:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : POP3 before SMTP
Bit 1 : ESMTP, authentication
Bit 0 : SMTP, no authenticationrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.3.5 |
wtWebGraphAnalog57661MailAuthUserName of the user to be authenticated.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.3.6 |
wtWebGraphAnalog57661MailAuthPasswordAuthentication password.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.3.7 |
wtWebGraphAnalog57661MailPop3ServerName or Ip-address of the POP3 Servers.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.3.8 |
wtWebGraphAnalog57661SNMP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.3.4 |
wtWebGraphAnalog57661SnmpCommunityStringReadCommunity string read onlyrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.4.1 |
wtWebGraphAnalog57661SnmpCommunityStringReadWriteCommunity string read / writerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.4.2 |
wtWebGraphAnalog57661SystemTrapManagerIPName or IP address of the TCP server which accepts the system trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.4.3 |
wtWebGraphAnalog57661SystemTrapEnableBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: ColdStart
Bit 1: WarmStart
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.4.4 |
wtWebGraphAnalog57661SnmpEnableSet bit 0 to enable SNMP.
If disabled, the device did not respond to any SNMP requests.
Bit 1 decided wether the community string of read operations
is compared with the system password or not:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : SNMP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.4.5 |
wtWebGraphAnalog57661SnmpCommunityStringTrapCommunity string send within traps.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.4.6 |
wtWebGraphAnalog57661UDP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.3.5 |
wtWebGraphAnalog57661UdpPortUdp port to which the Udp queries ( short form GET requests) can be sent. This
port number must be unique within the device.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.5.1 |
wtWebGraphAnalog57661UdpEnableSet this bit to enable UDP support:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : UDP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.5.2 |
wtWebGraphAnalog57661Syslog OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.3.6 |
wtWebGraphAnalog57661SyslogServerIPName or IP address of the Syslog server, which accepts the Syslog messgaes.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.6.1 |
wtWebGraphAnalog57661SyslogServerPortPortnumber of the Syslog servers, default 514.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.6.2 |
wtWebGraphAnalog57661SyslogSystemMessagesEnableBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: ColdStart
Bit 1: WarmStart
Bit 2: Diag Messages
Bit 3-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.6.3 |
wtWebGraphAnalog57661SyslogEnableSet bit 0to enable Syslog:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Syslog enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.6.4 |
wtWebGraphAnalog57661FTP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.3.7 |
wtWebGraphAnalog57661FTPServerIPName or IP address of the FTP server, which accepts the FTP messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.7.1 |
wtWebGraphAnalog57661FTPServerControlPortPortnumber of the control port of the FTP server, default 21.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.7.2 |
wtWebGraphAnalog57661FTPUserNameFTP Loggin: user name.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.7.3 |
wtWebGraphAnalog57661FTPPasswordFTP Loggin: user password.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.7.4 |
wtWebGraphAnalog57661FTPAccountFTP Loggin: name of account.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.7.5 |
wtWebGraphAnalog57661FTPOptionBit 0 switches the FTP Server in Passiv-Mode,
the Client controls the data connection on its own:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : PASV enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.7.6 |
wtWebGraphAnalog57661FTPEnableSet Bit 0 to enable FTP:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : FTP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.7.7 |
wtWebGraphAnalog57661Language OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.3.8 |
wtWebGraphAnalog57661LanguageSelectLanguage selection:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 2-7: unused
Bit 1 : English
Bit 0 : Germanrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.8.1 |
wtWebGraphAnalog57661Binary OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9 |
wtWebGraphAnalog57661BinaryModeCountNumber of independent binary channels.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.1 |
wtWebGraphAnalog57661BinaryIfTableTable of indices. SEQUENCE OF WtWebGraphAnalog57661BinaryIfEntry .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.2 |
wtWebGraphAnalog57661BinaryIfEntryIndices of the binary channels. WtWebGraphAnalog57661BinaryIfEntry .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.2.1 |
wtWebGraphAnalog57661BinaryModeNoNumber of the binary channel.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.2.1.1 |
wtWebGraphAnalog57661BinaryTableTable of properties of the binary mode. SEQUENCE OF WtWebGraphAnalog57661BinaryEntry .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3 |
wtWebGraphAnalog57661BinaryEntryBinary properties. WtWebGraphAnalog57661BinaryEntry .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1 |
wtWebGraphAnalog57661BinaryOperationModeSelection of the operation mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : UDP Peer
Bit 1 : TCP Client
Bit 0 : TCP Serverrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.1 |
wtWebGraphAnalog57661BinaryTcpServerLocalPortLocal TCP port for data exchange in this server mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual).rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.2 |
wtWebGraphAnalog57661BinaryTcpServerInputTriggerEvery change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless every transmission will contain all input states.
If a bit is set (1), a change of state on the corresponding input
triggers a transmission. If the bit is not set (0), no transmission
takes place.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 0-1: Analog inputs 0-1rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.3 |
wtWebGraphAnalog57661BinaryTcpServerApplicationModeSelection of the application mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 4-7: unused
Bit 3 : OPC Device
Bit 2 : Box2Box Slave
Bit 1 : Compatible 50xxx
Bit 0 : Defaultrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.4 |
wtWebGraphAnalog57661BinaryTcpClientLocalPortLocal TCP port for data exchange in this client mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual).rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.5 |
wtWebGraphAnalog57661BinaryTcpClientServerPortPort number of the server. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the server port to zero.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.6 |
wtWebGraphAnalog57661BinaryTcpClientServerIpAddrIp address of the server. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the server IP address to 0.0.0.0.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.7 |
wtWebGraphAnalog57661BinaryTcpClientServerPasswordBuilding a connection may be protected by the
administrator password of the server. Enter the server password
to establish the connection, if a server administrator password
exists.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.8 |
wtWebGraphAnalog57661BinaryTcpClientInactivityConnection timeout in 100ms. If no data are exchanged within the specified
time, the device closes the connection to the server.
The value 0 deactivates the timer. Using the Box2Box mode this function is
disabled.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.9 |
wtWebGraphAnalog57661BinaryTcpClientInputTriggerEvery change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless every transmission will contain all input states.
If a bit is set (1), a change of state on the corresponding input
triggers a transmission. If the bit is not set (0), no transmission
takes place.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 0-1: Analog inputs 0-1rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.10 |
wtWebGraphAnalog57661BinaryTcpClientIntervalConfigurable interval with a 100ms base, in which the Webio device sends
data to the configured application. A interval of zero stopps the
periodical sending.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.11 |
wtWebGraphAnalog57661BinaryTcpClientApplicationModeSelection of the application mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : Box2Box Slave
Bit 1 : Compatible 50xxx
Bit 0 : Defaultrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.12 |
wtWebGraphAnalog57661BinaryUdpPeerLocalPortLocal UDP port for data exchange in this peer to peer mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual).rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.13 |
wtWebGraphAnalog57661BinaryUdpPeerRemotePortPort number of the remote device. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the remote port to zero.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.14 |
wtWebGraphAnalog57661BinaryUdpPeerRemoteIpAddrIp address of the remote device. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the remote device IP address to 0.0.0.0.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.15 |
wtWebGraphAnalog57661BinaryUdpPeerInputTriggerEvery change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless every transmission will contain all input states.
If a bit is set (1), a change of state on the corresponding input
triggers a transmission. If the bit is not set (0), no transmission
takes place.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 0-1: Analog inputs 0-1rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.16 |
wtWebGraphAnalog57661BinaryUdpPeerIntervalConfigurable interval with a 100ms base, in which the Webio device sends
data to the configured remote device. A interval of zero stopps the
periodical sending.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.17 |
wtWebGraphAnalog57661BinaryUdpPeerApplicationModeSelection of the application mode:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : Box2Box Slave
Bit 1 : Compatible 50xxx
Bit 0 : Defaultrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.18 |
wtWebGraphAnalog57661BinaryConnectedPortPort number of the remote device, after connection has been established.
In case of no connection or missing port informations a zero will be read.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.19 |
wtWebGraphAnalog57661BinaryConnectedIpAddrIP address of the remote device, after connection has been established.
In case of no connection or missing port informations 0.0.0.0 will be read.ro IpAddress .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.20 |
wtWebGraphAnalog57661BinaryTcpServerClientHttpPortHTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs
status informations will be send to this port.
Not used at mode Compatible 50xxx.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.21 |
wtWebGraphAnalog57661BinaryTcpClientServerHttpPortHTTP port number of the remote device at TCP Client Mode. In the operating mode
Box2Box connection status informations will be exchanged through this port.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.22 |
wtWebGraphAnalog57661BinaryTcpServerHysteresis1A change greater than this value initiate a transmission of the corresponding input value.
The input 1 must be selected at wtWebGraphAnalog57661BinaryTcpServerInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.23 |
wtWebGraphAnalog57661BinaryTcpServerHysteresis2A change greater than this value initiate a transmission of the corresponding input value.
The input 2 must be selected at wtWebGraphAnalog57661BinaryTcpServerInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.24 |
wtWebGraphAnalog57661BinaryTcpClientHysteresis1A change greater than this value initiate a transmission of the corresponding input value.
The input 1 must be selected at wtWebGraphAnalog57661BinaryTcpClientInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.25 |
wtWebGraphAnalog57661BinaryTcpClientHysteresis2A change greater than this value initiate a transmission of the corresponding input value.
The input 2 must be selected at wtWebGraphAnalog57661BinaryTcpClientInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.26 |
wtWebGraphAnalog57661BinaryUdpPeerHysteresis1A change greater than this value initiate a transmission of the corresponding input value.
The input 1 must be selected at wtWebGraphAnalog57661BinaryUdpPeerInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.27 |
wtWebGraphAnalog57661BinaryUdpPeerHysteresis2A change greater than this value initiate a transmission of the corresponding input value.
The input 2 must be selected at wtWebGraphAnalog57661BinaryUdpPeerInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.28 |
wtWebGraphAnalog57661Datalogger OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.4 |
wtWebGraphAnalog57661LoggerTimebaseTime base of the data loggerrw Enumeration .1.3.6.1.4.1.5040.1.2.28.3.1.4.1 |
wtWebGraphAnalog57661LoggerSensorSelBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.4.2 |
wtWebGraphAnalog57661DisplaySensorSelBinary coded sensor selection:
only selected sensors will be shown in the graphical presentation:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.4.3 |
wtWebGraphAnalog57661SensorColorTableList of sensor colors for the praphical presentation. SEQUENCE OF WtWebGraphAnalog57661SensorColorEntry .1.3.6.1.4.1.5040.1.2.28.3.1.4.4 |
wtWebGraphAnalog57661SensorColorEntryIndex numbers of the sensors. WtWebGraphAnalog57661SensorColorEntry .1.3.6.1.4.1.5040.1.2.28.3.1.4.4.1 |
wtWebGraphAnalog57661SensorColorColor of the sensors at the praphical presention.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.4.4.1.1 |
wtWebGraphAnalog57661AutoScaleEnableIf bit 0 is set, vertical auto scale is enabled:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Auto Scale enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.4.5 |
wtWebGraphAnalog57661VerticalUpperLimitThis value defines the maximum temperature shown in the graphical presentation,
if no auto scaling is selected.
Temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.4.6 |
wtWebGraphAnalog57661VerticalLowerLimitThis value defines the minimum temperature shown in the graphical presentation,
if no auto scaling is selected.
Temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.4.7 |
wtWebGraphAnalog57661HorizontalZoomDefines the default zoom stage, if no auto scaling is selected.rw Enumeration .1.3.6.1.4.1.5040.1.2.28.3.1.4.8 |
wtWebGraphAnalog57661Alarm OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.5 |
wtWebGraphAnalog57661AlarmCountNumber of independent alarms.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.5.1 |
wtWebGraphAnalog57661AlarmIfTableList of alarm indices. SEQUENCE OF WtWebGraphAnalog57661AlarmIfEntry .1.3.6.1.4.1.5040.1.2.28.3.1.5.2 |
wtWebGraphAnalog57661AlarmIfEntryNumbers of the alarms. WtWebGraphAnalog57661AlarmIfEntry .1.3.6.1.4.1.5040.1.2.28.3.1.5.2.1 |
wtWebGraphAnalog57661AlarmNoAlarm number.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.5.2.1.1 |
wtWebGraphAnalog57661AlarmTableList of settings depending on the alarm number. SEQUENCE OF WtWebGraphAnalog57661AlarmEntry .1.3.6.1.4.1.5040.1.2.28.3.1.5.3 |
wtWebGraphAnalog57661AlarmEntryAlarm parameters of the individual alarms. WtWebGraphAnalog57661AlarmEntry .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1 |
wtWebGraphAnalog57661AlarmTriggerBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3:
Bit 0: Timer
Bit 1: ColdStart
Bit 2: WarmStart
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.1 |
wtWebGraphAnalog57661AlarmMin1Minimum sensor 1 with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.2 |
wtWebGraphAnalog57661AlarmMax1Maximum sensor 1 with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.3 |
wtWebGraphAnalog57661AlarmHysteresis1Reading changes of this size clears the alarm state (MAX-hyst, MIN+hyst.)
with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.4 |
wtWebGraphAnalog57661AlarmDelayAlarm will be delayed by setting this time while stable alarm
condition occur (time in minutes).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.5 |
wtWebGraphAnalog57661AlarmIntervalSend interval for alarm messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.6 |
wtWebGraphAnalog57661AlarmEnableBinary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Mail Enable
Bit 1: SNMP Trap enable
Bit 2: TCP Client enable
Bit 3: Syslog enable
Bit 4: FTP Client enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.7 |
wtWebGraphAnalog57661AlarmEMailAddrE-Mail address for sending the alarm mail to.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.8 |
wtWebGraphAnalog57661AlarmMailSubjectSubject line for alarm mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.9 |
wtWebGraphAnalog57661AlarmMailTextAlarm mail text: <Mn> provides the current temperature; n = 1..2.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.10 |
wtWebGraphAnalog57661AlarmManagerIPName or IP address of the SNMP Manager which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.11 |
wtWebGraphAnalog57661AlarmTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.12 |
wtWebGraphAnalog57661AlarmMailOptionsBinary coded options:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Attach Logger.csv Enable
Bit 1 : CSV-Data_since_last_report
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.13 |
wtWebGraphAnalog57661AlarmTcpIpAddrName or IP address of the TCP server which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.14 |
wtWebGraphAnalog57661AlarmTcpPortPort number of the TCP server which accepts the trap.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.15 |
wtWebGraphAnalog57661AlarmTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.16 |
wtWebGraphAnalog57661AlarmClearMailSubjectSubject line for alarm clear mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.17 |
wtWebGraphAnalog57661AlarmClearMailTextAlarm clear mail text: <Mn> provides the current temperature; n = 1..2.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.18 |
wtWebGraphAnalog57661AlarmClearTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.19 |
wtWebGraphAnalog57661AlarmClearTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.20 |
wtWebGraphAnalog57661AlarmMin2Minimum sensor 2 with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.21 |
wtWebGraphAnalog57661AlarmMax2Maximum sensor 2 with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.22 |
wtWebGraphAnalog57661AlarmHysteresis2Hysterese rel. sensor 2 with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.23 |
wtWebGraphAnalog57661AlarmSyslogIpAddrIP address of the syslog server to which the Webio device should send syslog messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.24 |
wtWebGraphAnalog57661AlarmSyslogPortPort number of the syslog server to which the Webio device should send syslog messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.25 |
wtWebGraphAnalog57661AlarmSyslogTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.26 |
wtWebGraphAnalog57661AlarmSyslogClearTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body of a alarm clear message.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.27 |
wtWebGraphAnalog57661AlarmFtpDataPortLocal data port: 1..65535 or AUTO: the next free port will be assigned.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.28 |
wtWebGraphAnalog57661AlarmFtpFileNameName of the file including path informations.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.29 |
wtWebGraphAnalog57661AlarmFtpTextMessage text to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.30 |
wtWebGraphAnalog57661AlarmFtpClearTextAlarm clear message to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.31 |
wtWebGraphAnalog57661AlarmFtpOptionBinary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : STORE
Bit 1 : APPEND
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.32 |
wtWebGraphAnalog57661AlarmTimerCronThis entry defines a time window for alarm 1-8 and a activation time for the report.
A time window is definied by start and stop time stamp, seperated by a space or tab.
The activation time of the report is defined by a single start time stamp.
Each time stamp contains 5 space or tab seperated text fields for time trigger definition.
Each field must match with the actual time to trigger an action, weekday and day of month
are interpreted separatley.
1: Minutes Range 0-59
2. Hours Range 0-23, 0 is midnight
3: Day of month Range 1-31
4: Month Range 1-12
5: Weekday Range 0-6, 0 is sunday
Syntax for every field:
- an asterix (*) enables every possible setting of a field
- single numbers seperated by commas (i.e.: 2,14,22)
- a partition within the allowed range (i.e.: 1-5)
- step size within a partition of the allowed range (i.e.: 0-59/2 every second minute).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.33 |
wtWebGraphAnalog57661Graphics OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.6 |
wtWebGraphAnalog57661GraphicsBase OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.6.1 |
wtWebGraphAnalog57661GraphicsBaseEnableDefines the viewing options of the graphic:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Auto scroll enable
Bit 1 : Show table
Bit 2 : Show graph
Bit 3 : Show control buttons
Bit 4 : Show config menu
Bit 5-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.6.1.1 |
wtWebGraphAnalog57661GraphicsBaseWidthDefines the width of the graphic in pixels.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.6.1.2 |
wtWebGraphAnalog57661GraphicsBaseHeightDefines the height of the graphic in pixels.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.6.1.3 |
wtWebGraphAnalog57661GraphicsBaseFrameColorFrame color definition in RGB.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.6.1.4 |
wtWebGraphAnalog57661GraphicsBaseBackgroundColorBackground color definition in RGB.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.6.1.5 |
wtWebGraphAnalog57661GraphicsBasePollingrateDefines the pollingrate in seconds,
which defines the refreshing intervall of the graphic.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.6.1.6 |
wtWebGraphAnalog57661GraphicsSelect OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.6.2 |
wtWebGraphAnalog57661GraphicsSelectDisplaySensorSelBinary coded sensor selection:
only selected sensors will be shown in the graphical presentation:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.6.2.1 |
wtWebGraphAnalog57661GraphicsSelectDisplayShowExtremBinary coded sensor selection:
only selected sensors will be shown with minima and maxima:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.6.2.2 |
wtWebGraphAnalog57661SensorColor2TableList of sensor colors for the praphical presentation. SEQUENCE OF WtWebGraphAnalog57661SensorColor2Entry .1.3.6.1.4.1.5040.1.2.28.3.1.6.2.3 |
wtWebGraphAnalog57661SensorColor2EntryNumbers of the sensors. WtWebGraphAnalog57661SensorColor2Entry .1.3.6.1.4.1.5040.1.2.28.3.1.6.2.3.1 |
wtWebGraphAnalog57661GraphicsSensorColorColor of the sensors at the praphical presention.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.6.2.3.1.1 |
wtWebGraphAnalog57661GraphicsSelectScaleAssignes one of 4 scales to a sensor:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Use Scale 1
Bit 1 : Use Scale 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.6.2.3.1.2 |
wtWebGraphAnalog57661GraphicsScale OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.6.3 |
wtWebGraphAnalog57661GraphicsScaleAutoScaleEnableSelect the Auto Scale Mode:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Scale 1 Auto scale enable
Bit 1 : Scale 2 Auto scale enable
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.6.3.1 |
wtWebGraphAnalog57661GraphicsScaleAutoFitEnableSelect the Auto Fit Mode::
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Scale 1 Auto fit enable
Bit 1 : Scale 2 Auto fit enable
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.6.3.2 |
wtWebGraphAnalog57661GraphicsScale1MinScale 1: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.6.3.3 |
wtWebGraphAnalog57661GraphicsScale2MinScale 2: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.6.3.4 |
wtWebGraphAnalog57661GraphicsScale1MaxScale 1: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.6.3.7 |
wtWebGraphAnalog57661GraphicsScale2MaxScale 2: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.6.3.8 |
wtWebGraphAnalog57661GraphicsScale1UnitScale 1: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.6.3.11 |
wtWebGraphAnalog57661GraphicsScale2UnitScale 2: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.6.3.12 |
wtWebGraphAnalog57661Report OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.1.7 |
wtWebGraphAnalog57661ReportCountNumber of independent Reports.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.7.1 |
wtWebGraphAnalog57661ReportIfTableList of Report indices. SEQUENCE OF WtWebGraphAnalog57661ReportIfEntry .1.3.6.1.4.1.5040.1.2.28.3.1.7.2 |
wtWebGraphAnalog57661ReportIfEntryNumbers of the Reports. WtWebGraphAnalog57661ReportIfEntry .1.3.6.1.4.1.5040.1.2.28.3.1.7.2.1 |
wtWebGraphAnalog57661ReportNoReport number.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.7.2.1.1 |
wtWebGraphAnalog57661ReportTableList of settings depending on the Report number. SEQUENCE OF WtWebGraphAnalog57661ReportEntry .1.3.6.1.4.1.5040.1.2.28.3.1.7.3 |
wtWebGraphAnalog57661ReportEntryReport parameters of the individual Reports. WtWebGraphAnalog57661ReportEntry .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1 |
wtWebGraphAnalog57661ReportEnableBinr kodierte Triggerbedingungen:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Report enable
Bit 1-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.1 |
wtWebGraphAnalog57661ReportTimerCronThis entry defines a time window for alarm 1-8 and a activation time for the report.
A time window is definied by start and stop time stamp, seperated by a space or tab.
The activation time of the report is defined by a single start time stamp.
Each time stamp contains 5 space or tab seperated text fields for time trigger definition.
Each field must match with the actual time to trigger an action, weekday and day of month
are interpreted separatley.
1: Minutes Range 0-59
2. Hours Range 0-23, 0 is midnight
3: Day of month Range 1-31
4: Month Range 1-12
5: Weekday Range 0-6, 0 is sunday
Syntax for every field:
- an asterix (*) enables every possible setting of a field
- single numbers seperated by commas (i.e.: 2,14,22)
- a partition within the allowed range (i.e.: 1-5)
- step size within a partition of the allowed range (i.e.: 0-59/2 every second minute).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.2 |
wtWebGraphAnalog57661ReportMethodeEnableBinary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Mail Enable
Bit 1: SNMP Trap enable
Bit 2: TCP Client enable
Bit 3: Syslog enable
Bit 4: FTP Client enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.3 |
wtWebGraphAnalog57661ReportEMailAddrE-Mail address for sending the alarm mail to.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.8 |
wtWebGraphAnalog57661ReportMailSubjectSubject line for alarm mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.9 |
wtWebGraphAnalog57661ReportMailTextReport mail text: <Mn> provides the current temperature; n = 1..2.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.10 |
wtWebGraphAnalog57661ReportManagerIPName or IP address of the SNMP Manager which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.11 |
wtWebGraphAnalog57661ReportTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.12 |
wtWebGraphAnalog57661ReportMailOptionsBinary coded options:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Attach Logger.csv Enable
Bit 1 : CSV-Data_since_last_report
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.13 |
wtWebGraphAnalog57661ReportTcpIpAddrName or IP address of the TCP server which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.14 |
wtWebGraphAnalog57661ReportTcpPortPort number of the TCP server which accepts the trap.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.15 |
wtWebGraphAnalog57661ReportTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.16 |
wtWebGraphAnalog57661ReportClearMailSubjectSubject line for alarm clear mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.17 |
wtWebGraphAnalog57661ReportClearMailTextReport clear mail text: <Mn> provides the current temperature; n = 1..2.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.18 |
wtWebGraphAnalog57661ReportClearTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.19 |
wtWebGraphAnalog57661ReportClearTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.20 |
wtWebGraphAnalog57661ReportSyslogIpAddrIP address of the syslog server to which the Webio device should send syslog messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.24 |
wtWebGraphAnalog57661ReportSyslogPortPort number of the syslog server to which the Webio device should send syslog messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.25 |
wtWebGraphAnalog57661ReportSyslogTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.26 |
wtWebGraphAnalog57661ReportSyslogClearTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body of a alarm clear message.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.27 |
wtWebGraphAnalog57661ReportFtpDataPortLocal data port: 1..65535 or AUTO: the next free port will be assigned.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.28 |
wtWebGraphAnalog57661ReportFtpFileNameName of the file including path informations.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.29 |
wtWebGraphAnalog57661ReportFtpTextMessage text to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.30 |
wtWebGraphAnalog57661ReportFtpClearTextReport clear message to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.31 |
wtWebGraphAnalog57661ReportFtpOptionBinary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : STORE
Bit 1 : APPEND
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.32 |
wtWebGraphAnalog57661Ports OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.2 |
wtWebGraphAnalog57661PortTableList of settings depending on the sensor number. SEQUENCE OF WtWebGraphAnalog57661PortEntry .1.3.6.1.4.1.5040.1.2.28.3.2.1 |
wtWebGraphAnalog57661PortEntrySensor parameters for the individual sensors. WtWebGraphAnalog57661PortEntry .1.3.6.1.4.1.5040.1.2.28.3.2.1.1 |
wtWebGraphAnalog57661PortNameName of the sensor.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.1 |
wtWebGraphAnalog57661PortTextDescription of the sensor.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.2 |
wtWebGraphAnalog57661PortOffset1Offset calibration: Offset in degrees with maximum 3 decimal places at set point 1.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.3 |
wtWebGraphAnalog57661SetPoint1Offset calibration: Reference set point 1 in degrees with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.4 |
wtWebGraphAnalog57661PortOffset2Offset calibration: Offset in degrees with maximum 3 decimal places at set point 2.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.5 |
wtWebGraphAnalog57661SetPoint2Offset calibration: Reference set point 2 in degrees with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.6 |
wtWebGraphAnalog57661PortCommentOffset calibration: informations of date, name of operator, reference devices.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.7 |
wtWebGraphAnalog57661PortSensorSelectBinary coded options for sensor 1:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : 0-20mA (default)
Bit 1 : 4-20mA
Bit 2 : Disconnect
Bit 3-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.8 |
wtWebGraphAnalog57661PortUnitUser scale: displayed unit.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.9 |
wtWebGraphAnalog57661PortScale0User scale: displayed value in 1/1000 at 0% full scale range.
Range: -999999.999 to 999999.999rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.10 |
wtWebGraphAnalog57661PortScale100User scale: displayed value in 1/1000 at 100% full scale range.
Range: -999999.999 to 999999.999rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.11 |
wtWebGraphAnalog57661PortOutputModeThis binary coded output mode defines the individual operation mode for any
output. More than one mode must not be selected. If an output mode is selected,
Bit 2 in wtWebGraphAnalog57661PortInputMode will be set automatically.
The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 6-7: unused
Bit 5 : Output OFF
Bit 4 : Binary 2
Bit 3 : Binary 1
Bit 2 : SNMP
Bit 1 : UDP ASCII
Bit 0 : HTTPrw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.12 |
wtWebGraphAnalog57661PortInputModeThis binary coded input mode defines the individual operation mode for any
input. More than one mode must not be selected. If an input mode is selected,
Bit 5 in wtWebGraphAnalog57661PortOutputMode will be set automatically.
The OCTETS are interpreted bit-by-bit,Bit 0 corresponds to the LSB.
OCTET 1: ungenutzt
OCTET 2: ungenutzt
OCTET 3: ungenutzt
OCTET 4: Bit 3-7: unused
Bit 2 : I-Output
Bit 1 : I-Input, active
Bit 0 : I-Input, passiverw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.13 |
wtWebGraphAnalog57661Manufact OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.3.3 |
wtWebGraphAnalog57661MfNameManufacturer company namerw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.3.1 |
wtWebGraphAnalog57661MfAddrManufacturer address.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.3.2 |
wtWebGraphAnalog57661MfHotlineManufacturer hotline.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.3.3 |
wtWebGraphAnalog57661MfInternetManufacturer Internet address.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.3.4 |
wtWebGraphAnalog57661MfDeviceTypManufacturer device name (model number).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.3.5 |
wtWebGraphAnalog57661MfOrderNoManufacturer part number.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.28.3.3.6 |
wtWebGraphAnalog57661Diag OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.28.4 |
wtWebGraphAnalog57661DiagErrorCountNumber of entries in the error memory.ro INTEGER .1.3.6.1.4.1.5040.1.2.28.4.1 |
wtWebGraphAnalog57661DiagBinaryErrorError causes coded bit-by-bit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.28.4.2 |
wtWebGraphAnalog57661DiagErrorIndexThe value of this variable is used as an index to read
an error massege from wtWebGraphAnalog57661DiagErrorMessage.
Errors are numbered from 1 to wtWebGraphAnalog57661DiagErrorCount.
Writing a valid value into this variable, making the appropriate
message readable from wtWebGraphAnalog57661DiagErrorMessage.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.4.3 |
wtWebGraphAnalog57661DiagErrorMessageUsing wtWebGraphAnalog57661DiagErrorIndex as an index, the appropriate message is available.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.28.4.4 |
wtWebGraphAnalog57661DiagErrorClearWriting 1 into this variable clears all diagnosis messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.28.4.5 |