WebGraph-AnalogIO-57662-US-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for WebGraph-AnalogIO-57662-US-MIB.
295
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
295 total| Object Name |
|---|
wut OBJECT IDENTIFIER .1.3.6.1.4.1.5040 |
IMPORTS Unknown .1.3.6.1.4.1.5040 |
wtComServer OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1 |
wtWebio OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2 |
wtWebGraphAnalog57662 OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29 |
wtWebGraphAnalog57662Alert1This SNMP trap is generated when Alarm 1 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.31 |
wtWebGraphAnalog57662Alert2This SNMP trap is generated when Alarm 2 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.32 |
wtWebGraphAnalog57662Alert3This SNMP trap is generated when Alarm 3 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.33 |
wtWebGraphAnalog57662Alert4This SNMP trap is generated when Alarm 4 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.34 |
wtWebGraphAnalog57662Alert5This SNMP trap is generated when Alarm 5 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.35 |
wtWebGraphAnalog57662Alert6This SNMP trap is generated when Alarm 6 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.36 |
wtWebGraphAnalog57662Alert7This SNMP trap is generated when Alarm 7 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.37 |
wtWebGraphAnalog57662Alert8This SNMP trap is generated when Alarm 8 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.38 |
wtWebGraphAnalog57662AlertReportThis SNMP trap is generated when the report was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.39 |
wtWebGraphAnalog57662Alert9This SNMP trap is generated when Alarm 1 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.91 |
wtWebGraphAnalog57662Alert10This SNMP trap is generated when Alarm 2 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.92 |
wtWebGraphAnalog57662Alert11This SNMP trap is generated when Alarm 3 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.93 |
wtWebGraphAnalog57662Alert12This SNMP trap is generated when Alarm 4 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.94 |
wtWebGraphAnalog57662Alert13This SNMP trap is generated when Alarm 5 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.95 |
wtWebGraphAnalog57662Alert14This SNMP trap is generated when Alarm 6 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.96 |
wtWebGraphAnalog57662Alert15This SNMP trap is generated when Alarm 7 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.97 |
wtWebGraphAnalog57662Alert16This SNMP trap is generated when Alarm 8 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.98 |
wtWebGraphAnalog57662AlertDiagThis SNMP trap is generated when a diagnosis/error message was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.29.0.110 |
wtWebGraphAnalog57662Inventory OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.1 |
wtWebGraphAnalog57662SensorsNumber of sensorsro INTEGER .1.3.6.1.4.1.5040.1.2.29.1.1 |
wtWebGraphAnalog57662SensorTableList of sensors. SEQUENCE OF WtWebGraphAnalog57662SensorEntry .1.3.6.1.4.1.5040.1.2.29.1.2 |
wtWebGraphAnalog57662SensorEntryList of sensor numbers. WtWebGraphAnalog57662SensorEntry .1.3.6.1.4.1.5040.1.2.29.1.2.1 |
wtWebGraphAnalog57662SensorNoSensor number.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.1.2.1.1 |
wtWebGraphAnalog57662ValuesTableList of measurement values corresponding to the channel numbers. SEQUENCE OF WtWebGraphAnalog57662ValuesEntry .1.3.6.1.4.1.5040.1.2.29.1.3 |
wtWebGraphAnalog57662ValuesEntryMeasurement values of the sensors. WtWebGraphAnalog57662ValuesEntry .1.3.6.1.4.1.5040.1.2.29.1.3.1 |
wtWebGraphAnalog57662ValuesMeasurement value of the sensor, ASCII.
This value will be translated according to the ports settings
for the read and write operations.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.1.3.1.1 |
wtWebGraphAnalog57662BinaryValuesTableList of binary measurement values corresponding to the channel numbers. SEQUENCE OF WtWebGraphAnalog57662BinaryValuesEntry .1.3.6.1.4.1.5040.1.2.29.1.4 |
wtWebGraphAnalog57662BinaryValuesEntryBinary measurement values of the sensors. WtWebGraphAnalog57662BinaryValuesEntry .1.3.6.1.4.1.5040.1.2.29.1.4.1 |
wtWebGraphAnalog57662BinaryValuesBinary measurement value of the sensor in 1/1000,
signed number, 0x7FFFFFFF indicates an invalid value.
This value will be translated according to the ports settings
for the read and write operations.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.1.4.1.1 |
wtWebGraphAnalog57662SessCntrl OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.2 |
wtWebGraphAnalog57662SessCntrlPasswordEntering this password opens a session which is ended by writing a 1 to
wtWebGraphAnalog57662SessCntrlLogout. When read this variable provides a string of
length zero.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.2.1 |
wtWebGraphAnalog57662SessCntrlConfigModeWhen the device is in SNMP configuration mode, the value 1 is
returned, otherwise 0. If the read value is 0 even though the
password was written, the device is already in config mode and the
variables can only be read.ro Enumeration .1.3.6.1.4.1.5040.1.2.29.2.2 |
wtWebGraphAnalog57662SessCntrlLogoutIf the device is in configuration mode and the session was opened by
this SNMP Manager, writing a 1 to this variable will end the session
and all parameters are stored.
Writing a 2 discards all entries again.
When read this variable provides the value 0.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.2.3 |
wtWebGraphAnalog57662SessCntrlAdminPasswordThis password protects access to the variables with administrator rights.
It can only be changed by the administrator. If no password was assigned,
the valid password is public.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.2.4 |
wtWebGraphAnalog57662SessCntrlConfigPasswordThis password protects access to the variables with configurator rights. It can
be changed by the administrator and by the configurator. If no password was assigned,
the valid password is public. When read this variable provides a null-pointer.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.2.5 |
wtWebGraphAnalog57662Config OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3 |
wtWebGraphAnalog57662Device OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1 |
wtWebGraphAnalog57662Text OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.1 |
wtWebGraphAnalog57662DeviceNameName of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.1.1 |
wtWebGraphAnalog57662DeviceTextDescription of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.1.2 |
wtWebGraphAnalog57662DeviceLocationDescription of the location of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.1.3 |
wtWebGraphAnalog57662DeviceContactContact address of the system operator of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.1.4 |
wtWebGraphAnalog57662TimeDate OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.2 |
wtWebGraphAnalog57662TimeZone OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.2.1 |
wtWebGraphAnalog57662TzOffsetHrsOffset hours for the time zone (winter time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.1 |
wtWebGraphAnalog57662TzOffsetMinOffset minutes for the time zone (winter time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.2 |
wtWebGraphAnalog57662TzEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Timezonerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.3 |
wtWebGraphAnalog57662StTzOffsetHrsOffset hours of the time zone (summer time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.4 |
wtWebGraphAnalog57662StTzOffsetMinOffset minutes of the time zone (summer time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.5 |
wtWebGraphAnalog57662StTzEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Summertimerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.6 |
wtWebGraphAnalog57662StTzStartMonthMonth in which the change is made from winter time to summer time.rw Enumeration .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.7 |
wtWebGraphAnalog57662StTzStartModeMode of the day of the week for which the change is made from winter time to summer time.rw Enumeration .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.8 |
wtWebGraphAnalog57662StTzStartWdayDay of the week on which the change is made from winter time to summer timerw Enumeration .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.9 |
wtWebGraphAnalog57662StTzStartHrsHour in which the time zone is changed from winter to summer time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.10 |
wtWebGraphAnalog57662StTzStartMinMinute in which the time zone is changed from winter to summer time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.11 |
wtWebGraphAnalog57662StTzStopMonthMonth in which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.12 |
wtWebGraphAnalog57662StTzStopModeMode of the week day on which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.13 |
wtWebGraphAnalog57662StTzStopWdayDay of the week on which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.14 |
wtWebGraphAnalog57662StTzStopHrsHour at which the time zone is changed from summer to winter time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.15 |
wtWebGraphAnalog57662StTzStopMinMinute at which the time zone is changed from summer to winter time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.1.16 |
wtWebGraphAnalog57662TimeServer OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.2.2 |
wtWebGraphAnalog57662TimeServer1IP address or name of the 1st time server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.2.2.1 |
wtWebGraphAnalog57662TimeServer2IP address or name of the 2nd time server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.2.2.2 |
wtWebGraphAnalog57662TsEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Time Serverrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.2.2.3 |
wtWebGraphAnalog57662TsSyncTimeDaily synchronisation time with the time server (hour: 0-23).rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.2.4 |
wtWebGraphAnalog57662DeviceClock OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.2.3 |
wtWebGraphAnalog57662ClockHrsClock hours taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.3.1 |
wtWebGraphAnalog57662ClockMinClock minutes taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.3.2 |
wtWebGraphAnalog57662ClockDayDate: Day of the month, taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.3.3 |
wtWebGraphAnalog57662ClockMonthDate: Month, taking into account the time zone settings.rw Enumeration .1.3.6.1.4.1.5040.1.2.29.3.1.2.3.4 |
wtWebGraphAnalog57662ClockYearDate: Year, taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.2.3.5 |
wtWebGraphAnalog57662Basic OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.3 |
wtWebGraphAnalog57662Network OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.3.1 |
wtWebGraphAnalog57662IpAddressIP address of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.29.3.1.3.1.1 |
wtWebGraphAnalog57662SubnetMaskSubnet mask of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.29.3.1.3.1.2 |
wtWebGraphAnalog57662GatewayGateway of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.29.3.1.3.1.3 |
wtWebGraphAnalog57662DnsServer1IP address of the 1st DNS server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.1.4 |
wtWebGraphAnalog57662DnsServer2IP address of the 2nd DNS server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.1.5 |
wtWebGraphAnalog57662AddConfigAdditional configuration (1=ON):
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1: DHCP disable
Bit 0: BOOTP disablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.1.6 |
wtWebGraphAnalog57662HTTP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.3.2 |
wtWebGraphAnalog57662StartupBinary coded start page:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1: Index.htm
Bit 2: Home.htm
Bit 3: User.htm
Only one page may be selected at a time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.2.1 |
wtWebGraphAnalog57662GetHeaderEnableIf these bits are set, every answer of a short form GET question will be lead
by the IP-address and name of the device and/or a HTTP header:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-6: unused
Bit 1 : GET HTTP enable
Bit 0 : GET Header enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.2.2 |
wtWebGraphAnalog57662HttpPortDefinition of the standard HTML port (Default: 80).rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.2.3 |
wtWebGraphAnalog57662Mail OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.3.3 |
wtWebGraphAnalog57662MailAdNameDevice name for mail administration.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.3.1 |
wtWebGraphAnalog57662MailReplyReply address for the mail server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.3.2 |
wtWebGraphAnalog57662MailServerName or IP address of the mail server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.3.3 |
wtWebioAn1MailEnableSet this bit to enable the sending of mails:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Mail enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.3.4 |
wtWebGraphAnalog57662MailAuthenticationSelection of the authentication modi:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : POP3 before SMTP
Bit 1 : ESMTP, authentication
Bit 0 : SMTP, no authenticationrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.3.5 |
wtWebGraphAnalog57662MailAuthUserName of the user to be authenticated.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.3.6 |
wtWebGraphAnalog57662MailAuthPasswordAuthentication password.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.3.7 |
wtWebGraphAnalog57662MailPop3ServerName or Ip-address of the POP3 Servers.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.3.8 |
wtWebGraphAnalog57662SNMP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.3.4 |
wtWebGraphAnalog57662SnmpCommunityStringReadCommunity string read onlyrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.4.1 |
wtWebGraphAnalog57662SnmpCommunityStringReadWriteCommunity string read / writerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.4.2 |
wtWebGraphAnalog57662SystemTrapManagerIPName or IP address of the TCP server which accepts the system trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.4.3 |
wtWebGraphAnalog57662SystemTrapEnableBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: ColdStart
Bit 1: WarmStart
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.4.4 |
wtWebGraphAnalog57662SnmpEnableSet bit 0 to enable SNMP.
If disabled, the device did not respond to any SNMP requests.
Bit 1 decided wether the community string of read operations
is compared with the system password or not:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : SNMP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.4.5 |
wtWebGraphAnalog57662SnmpCommunityStringTrapCommunity string send within traps.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.4.6 |
wtWebGraphAnalog57662UDP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.3.5 |
wtWebGraphAnalog57662UdpPortUdp port to which the Udp queries ( short form GET requests) can be sent. This
port number must be unique within the device.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.5.1 |
wtWebGraphAnalog57662UdpEnableSet this bit to enable UDP support:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : UDP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.5.2 |
wtWebGraphAnalog57662Syslog OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.3.6 |
wtWebGraphAnalog57662SyslogServerIPName or IP address of the Syslog server, which accepts the Syslog messgaes.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.6.1 |
wtWebGraphAnalog57662SyslogServerPortPortnumber of the Syslog servers, default 514.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.6.2 |
wtWebGraphAnalog57662SyslogSystemMessagesEnableBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: ColdStart
Bit 1: WarmStart
Bit 2: Diag Messages
Bit 3-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.6.3 |
wtWebGraphAnalog57662SyslogEnableSet bit 0to enable Syslog:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Syslog enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.6.4 |
wtWebGraphAnalog57662FTP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.3.7 |
wtWebGraphAnalog57662FTPServerIPName or IP address of the FTP server, which accepts the FTP messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.7.1 |
wtWebGraphAnalog57662FTPServerControlPortPortnumber of the control port of the FTP server, default 21.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.7.2 |
wtWebGraphAnalog57662FTPUserNameFTP Loggin: user name.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.7.3 |
wtWebGraphAnalog57662FTPPasswordFTP Loggin: user password.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.7.4 |
wtWebGraphAnalog57662FTPAccountFTP Loggin: name of account.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.7.5 |
wtWebGraphAnalog57662FTPOptionBit 0 switches the FTP Server in Passiv-Mode,
the Client controls the data connection on its own:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : PASV enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.7.6 |
wtWebGraphAnalog57662FTPEnableSet Bit 0 to enable FTP:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : FTP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.7.7 |
wtWebGraphAnalog57662Language OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.3.8 |
wtWebGraphAnalog57662LanguageSelectLanguage selection:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 2-7: unused
Bit 1 : English
Bit 0 : Germanrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.8.1 |
wtWebGraphAnalog57662Binary OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9 |
wtWebGraphAnalog57662BinaryModeCountNumber of independent binary channels.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.1 |
wtWebGraphAnalog57662BinaryIfTableTable of indices. SEQUENCE OF WtWebGraphAnalog57662BinaryIfEntry .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.2 |
wtWebGraphAnalog57662BinaryIfEntryIndices of the binary channels. WtWebGraphAnalog57662BinaryIfEntry .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.2.1 |
wtWebGraphAnalog57662BinaryModeNoNumber of the binary channel.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.2.1.1 |
wtWebGraphAnalog57662BinaryTableTable of properties of the binary mode. SEQUENCE OF WtWebGraphAnalog57662BinaryEntry .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3 |
wtWebGraphAnalog57662BinaryEntryBinary properties. WtWebGraphAnalog57662BinaryEntry .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1 |
wtWebGraphAnalog57662BinaryOperationModeSelection of the operation mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : UDP Peer
Bit 1 : TCP Client
Bit 0 : TCP Serverrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.1 |
wtWebGraphAnalog57662BinaryTcpServerLocalPortLocal TCP port for data exchange in this server mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual).rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.2 |
wtWebGraphAnalog57662BinaryTcpServerInputTriggerEvery change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless every transmission will contain all input states.
If a bit is set (1), a change of state on the corresponding input
triggers a transmission. If the bit is not set (0), no transmission
takes place.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 0-1: Analog inputs 0-1rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.3 |
wtWebGraphAnalog57662BinaryTcpServerApplicationModeSelection of the application mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 4-7: unused
Bit 3 : OPC Device
Bit 2 : Box2Box Slave
Bit 1 : Compatible 50xxx
Bit 0 : Defaultrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.4 |
wtWebGraphAnalog57662BinaryTcpClientLocalPortLocal TCP port for data exchange in this client mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual).rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.5 |
wtWebGraphAnalog57662BinaryTcpClientServerPortPort number of the server. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the server port to zero.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.6 |
wtWebGraphAnalog57662BinaryTcpClientServerIpAddrIp address of the server. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the server IP address to 0.0.0.0.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.7 |
wtWebGraphAnalog57662BinaryTcpClientServerPasswordBuilding a connection may be protected by the
administrator password of the server. Enter the server password
to establish the connection, if a server administrator password
exists.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.8 |
wtWebGraphAnalog57662BinaryTcpClientInactivityConnection timeout in 100ms. If no data are exchanged within the specified
time, the device closes the connection to the server.
The value 0 deactivates the timer. Using the Box2Box mode this function is
disabled.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.9 |
wtWebGraphAnalog57662BinaryTcpClientInputTriggerEvery change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless every transmission will contain all input states.
If a bit is set (1), a change of state on the corresponding input
triggers a transmission. If the bit is not set (0), no transmission
takes place.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 0-1: Analog inputs 0-1rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.10 |
wtWebGraphAnalog57662BinaryTcpClientIntervalConfigurable interval with a 100ms base, in which the Webio device sends
data to the configured application. A interval of zero stopps the
periodical sending.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.11 |
wtWebGraphAnalog57662BinaryTcpClientApplicationModeSelection of the application mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : Box2Box Slave
Bit 1 : Compatible 50xxx
Bit 0 : Defaultrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.12 |
wtWebGraphAnalog57662BinaryUdpPeerLocalPortLocal UDP port for data exchange in this peer to peer mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual).rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.13 |
wtWebGraphAnalog57662BinaryUdpPeerRemotePortPort number of the remote device. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the remote port to zero.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.14 |
wtWebGraphAnalog57662BinaryUdpPeerRemoteIpAddrIp address of the remote device. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the remote device IP address to 0.0.0.0.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.15 |
wtWebGraphAnalog57662BinaryUdpPeerInputTriggerEvery change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless every transmission will contain all input states.
If a bit is set (1), a change of state on the corresponding input
triggers a transmission. If the bit is not set (0), no transmission
takes place.
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 0-1: Analog inputs 0-1rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.16 |
wtWebGraphAnalog57662BinaryUdpPeerIntervalConfigurable interval with a 100ms base, in which the Webio device sends
data to the configured remote device. A interval of zero stopps the
periodical sending.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.17 |
wtWebGraphAnalog57662BinaryUdpPeerApplicationModeSelection of the application mode:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : Box2Box Slave
Bit 1 : Compatible 50xxx
Bit 0 : Defaultrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.18 |
wtWebGraphAnalog57662BinaryConnectedPortPort number of the remote device, after connection has been established.
In case of no connection or missing port informations a zero will be read.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.19 |
wtWebGraphAnalog57662BinaryConnectedIpAddrIP address of the remote device, after connection has been established.
In case of no connection or missing port informations 0.0.0.0 will be read.ro IpAddress .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.20 |
wtWebGraphAnalog57662BinaryTcpServerClientHttpPortHTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs
status informations will be send to this port.
Not used at mode Compatible 50xxx.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.21 |
wtWebGraphAnalog57662BinaryTcpClientServerHttpPortHTTP port number of the remote device at TCP Client Mode. In the operating mode
Box2Box connection status informations will be exchanged through this port.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.22 |
wtWebGraphAnalog57662BinaryTcpServerHysteresis1A change greater than this value initiate a transmission of the corresponding input value.
The input 1 must be selected at wtWebGraphAnalog57662BinaryTcpServerInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.23 |
wtWebGraphAnalog57662BinaryTcpServerHysteresis2A change greater than this value initiate a transmission of the corresponding input value.
The input 2 must be selected at wtWebGraphAnalog57662BinaryTcpServerInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.24 |
wtWebGraphAnalog57662BinaryTcpClientHysteresis1A change greater than this value initiate a transmission of the corresponding input value.
The input 1 must be selected at wtWebGraphAnalog57662BinaryTcpClientInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.25 |
wtWebGraphAnalog57662BinaryTcpClientHysteresis2A change greater than this value initiate a transmission of the corresponding input value.
The input 2 must be selected at wtWebGraphAnalog57662BinaryTcpClientInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.26 |
wtWebGraphAnalog57662BinaryUdpPeerHysteresis1A change greater than this value initiate a transmission of the corresponding input value.
The input 1 must be selected at wtWebGraphAnalog57662BinaryUdpPeerInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.27 |
wtWebGraphAnalog57662BinaryUdpPeerHysteresis2A change greater than this value initiate a transmission of the corresponding input value.
The input 2 must be selected at wtWebGraphAnalog57662BinaryUdpPeerInputTrigger.
With a hysteresis of zero any change will be transmitted.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.28 |
wtWebGraphAnalog57662Datalogger OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.4 |
wtWebGraphAnalog57662LoggerTimebaseTime base of the data loggerrw Enumeration .1.3.6.1.4.1.5040.1.2.29.3.1.4.1 |
wtWebGraphAnalog57662LoggerSensorSelBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.4.2 |
wtWebGraphAnalog57662DisplaySensorSelBinary coded sensor selection:
only selected sensors will be shown in the graphical presentation:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.4.3 |
wtWebGraphAnalog57662SensorColorTableList of sensor colors for the praphical presentation. SEQUENCE OF WtWebGraphAnalog57662SensorColorEntry .1.3.6.1.4.1.5040.1.2.29.3.1.4.4 |
wtWebGraphAnalog57662SensorColorEntryIndex numbers of the sensors. WtWebGraphAnalog57662SensorColorEntry .1.3.6.1.4.1.5040.1.2.29.3.1.4.4.1 |
wtWebGraphAnalog57662SensorColorColor of the sensors at the praphical presention.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.4.4.1.1 |
wtWebGraphAnalog57662AutoScaleEnableIf bit 0 is set, vertical auto scale is enabled:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Auto Scale enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.4.5 |
wtWebGraphAnalog57662VerticalUpperLimitThis value defines the maximum temperature shown in the graphical presentation,
if no auto scaling is selected.
Temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.4.6 |
wtWebGraphAnalog57662VerticalLowerLimitThis value defines the minimum temperature shown in the graphical presentation,
if no auto scaling is selected.
Temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.4.7 |
wtWebGraphAnalog57662HorizontalZoomDefines the default zoom stage, if no auto scaling is selected.rw Enumeration .1.3.6.1.4.1.5040.1.2.29.3.1.4.8 |
wtWebGraphAnalog57662Alarm OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.5 |
wtWebGraphAnalog57662AlarmCountNumber of independent alarms.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.5.1 |
wtWebGraphAnalog57662AlarmIfTableList of alarm indices. SEQUENCE OF WtWebGraphAnalog57662AlarmIfEntry .1.3.6.1.4.1.5040.1.2.29.3.1.5.2 |
wtWebGraphAnalog57662AlarmIfEntryNumbers of the alarms. WtWebGraphAnalog57662AlarmIfEntry .1.3.6.1.4.1.5040.1.2.29.3.1.5.2.1 |
wtWebGraphAnalog57662AlarmNoAlarm number.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.5.2.1.1 |
wtWebGraphAnalog57662AlarmTableList of settings depending on the alarm number. SEQUENCE OF WtWebGraphAnalog57662AlarmEntry .1.3.6.1.4.1.5040.1.2.29.3.1.5.3 |
wtWebGraphAnalog57662AlarmEntryAlarm parameters of the individual alarms. WtWebGraphAnalog57662AlarmEntry .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1 |
wtWebGraphAnalog57662AlarmTriggerBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3:
Bit 0: Timer
Bit 1: ColdStart
Bit 2: WarmStart
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.1 |
wtWebGraphAnalog57662AlarmMin1Minimum sensor 1 with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.2 |
wtWebGraphAnalog57662AlarmMax1Maximum sensor 1 with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.3 |
wtWebGraphAnalog57662AlarmHysteresis1Reading changes of this size clears the alarm state (MAX-hyst, MIN+hyst.)
with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.4 |
wtWebGraphAnalog57662AlarmDelayAlarm will be delayed by setting this time while stable alarm
condition occur (time in minutes).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.5 |
wtWebGraphAnalog57662AlarmIntervalSend interval for alarm messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.6 |
wtWebGraphAnalog57662AlarmEnableBinary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Mail Enable
Bit 1: SNMP Trap enable
Bit 2: TCP Client enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.7 |
wtWebGraphAnalog57662AlarmEMailAddrE-Mail address for sending the alarm mail to.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.8 |
wtWebGraphAnalog57662AlarmMailSubjectSubject line for alarm mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.9 |
wtWebGraphAnalog57662AlarmMailTextAlarm mail text: <Mn> provides the current temperature; n = 1..2.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.10 |
wtWebGraphAnalog57662AlarmManagerIPName or IP address of the SNMP Manager which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.11 |
wtWebGraphAnalog57662AlarmTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.12 |
wtWebGraphAnalog57662AlarmMailOptionsBinary coded options:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Attach Thermo.csv Enable
Bit 1 : CSV-Data_since_last_report
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.13 |
wtWebGraphAnalog57662AlarmTcpIpAddrName or IP address of the TCP server which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.14 |
wtWebGraphAnalog57662AlarmTcpPortPort number of the TCP server which accepts the trap.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.15 |
wtWebGraphAnalog57662AlarmTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.16 |
wtWebGraphAnalog57662AlarmClearMailSubjectSubject line for alarm clear mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.17 |
wtWebGraphAnalog57662AlarmClearMailTextAlarm clear mail text: <Mn> provides the current temperature; n = 1..2.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.18 |
wtWebGraphAnalog57662AlarmClearTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.19 |
wtWebGraphAnalog57662AlarmClearTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.20 |
wtWebGraphAnalog57662AlarmMin2Minimum sensor 2 with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.21 |
wtWebGraphAnalog57662AlarmMax2Maximum sensor 2 with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.22 |
wtWebGraphAnalog57662AlarmHysteresis2Hysterese rel. sensor 2 with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.23 |
wtWebGraphAnalog57662AlarmSyslogIpAddrIP address of the syslog server to which the Webio device should send syslog messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.24 |
wtWebGraphAnalog57662AlarmSyslogPortPort number of the syslog server to which the Webio device should send syslog messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.25 |
wtWebGraphAnalog57662AlarmSyslogTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.26 |
wtWebGraphAnalog57662AlarmSyslogClearTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body of a alarm clear message.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.27 |
wtWebGraphAnalog57662AlarmFtpDataPortLocal data port: 1..65535 or AUTO: the next free port will be assigned.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.28 |
wtWebGraphAnalog57662AlarmFtpFileNameName of the file including path informations.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.29 |
wtWebGraphAnalog57662AlarmFtpTextMessage text to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.30 |
wtWebGraphAnalog57662AlarmFtpClearTextAlarm clear message to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.31 |
wtWebGraphAnalog57662AlarmFtpOptionBinary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : STORE
Bit 1 : APPEND
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.32 |
wtWebGraphAnalog57662AlarmTimerCronThis entry defines a time window for alarm 1-8 and a activation time for the report.
A time window is definied by start and stop time stamp, seperated by a space or tab.
The activation time of the report is defined by a single start time stamp.
Each time stamp contains 5 space or tab seperated text fields for time trigger definition.
Each field must match with the actual time to trigger an action, weekday and day of month
are interpreted separatley.
1: Minutes Range 0-59
2. Hours Range 0-23, 0 is midnight
3: Day of month Range 1-31
4: Month Range 1-12
5: Weekday Range 0-6, 0 is sunday
Syntax for every field:
- an asterix (*) enables every possible setting of a field
- single numbers seperated by commas (i.e.: 2,14,22)
- a partition within the allowed range (i.e.: 1-5)
- step size within a partition of the allowed range (i.e.: 0-59/2 every second minute).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.33 |
wtWebGraphAnalog57662Graphics OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.6 |
wtWebGraphAnalog57662GraphicsBase OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.6.1 |
wtWebGraphAnalog57662GraphicsBaseEnableDefines the viewing options of the graphic:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Auto scroll enable
Bit 1 : Show table
Bit 2 : Show graph
Bit 3 : Show control buttons
Bit 4 : Show config menu
Bit 5-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.6.1.1 |
wtWebGraphAnalog57662GraphicsBaseWidthDefines the width of the graphic in pixels.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.6.1.2 |
wtWebGraphAnalog57662GraphicsBaseHeightDefines the height of the graphic in pixels.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.6.1.3 |
wtWebGraphAnalog57662GraphicsBaseFrameColorFrame color definition in RGB.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.6.1.4 |
wtWebGraphAnalog57662GraphicsBaseBackgroundColorBackground color definition in RGB.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.6.1.5 |
wtWebGraphAnalog57662GraphicsBasePollingrateDefines the pollingrate in seconds,
which defines the refreshing intervall of the graphic.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.6.1.6 |
wtWebGraphAnalog57662GraphicsSelect OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.6.2 |
wtWebGraphAnalog57662GraphicsSelectDisplaySensorSelBinary coded sensor selection:
only selected sensors will be shown in the graphical presentation:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.6.2.1 |
wtWebGraphAnalog57662GraphicsSelectDisplayShowExtremBinary coded sensor selection:
only selected sensors will be shown with minima and maxima:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.6.2.2 |
wtWebGraphAnalog57662SensorColor2TableList of sensor colors for the praphical presentation. SEQUENCE OF WtWebGraphAnalog57662SensorColor2Entry .1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3 |
wtWebGraphAnalog57662SensorColor2EntryNumbers of the sensors. WtWebGraphAnalog57662SensorColor2Entry .1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1 |
wtWebGraphAnalog57662GraphicsSensorColorColor of the sensors at the praphical presention.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1.1 |
wtWebGraphAnalog57662GraphicsSelectScaleAssignes one of 4 scales to a sensor:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Use Scale 1
Bit 1 : Use Scale 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1.2 |
wtWebGraphAnalog57662GraphicsScale OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.6.3 |
wtWebGraphAnalog57662GraphicsScaleAutoScaleEnableSelect the Auto Scale Mode:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Scale 1 Auto scale enable
Bit 1 : Scale 2 Auto scale enable
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.6.3.1 |
wtWebGraphAnalog57662GraphicsScaleAutoFitEnableSelect the Auto Fit Mode::
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Scale 1 Auto fit enable
Bit 1 : Scale 2 Auto fit enable
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.6.3.2 |
wtWebGraphAnalog57662GraphicsScale1MinScale 1: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.6.3.3 |
wtWebGraphAnalog57662GraphicsScale2MinScale 2: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.6.3.4 |
wtWebGraphAnalog57662GraphicsScale1MaxScale 1: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.6.3.7 |
wtWebGraphAnalog57662GraphicsScale2MaxScale 2: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.6.3.8 |
wtWebGraphAnalog57662GraphicsScale1UnitScale 1: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.6.3.11 |
wtWebGraphAnalog57662GraphicsScale2UnitScale 2: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.6.3.12 |
wtWebGraphAnalog57662Report OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.1.7 |
wtWebGraphAnalog57662ReportCountNumber of independent Reports.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.7.1 |
wtWebGraphAnalog57662ReportIfTableList of Report indices. SEQUENCE OF WtWebGraphAnalog57662ReportIfEntry .1.3.6.1.4.1.5040.1.2.29.3.1.7.2 |
wtWebGraphAnalog57662ReportIfEntryNumbers of the Reports. WtWebGraphAnalog57662ReportIfEntry .1.3.6.1.4.1.5040.1.2.29.3.1.7.2.1 |
wtWebGraphAnalog57662ReportNoReport number.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.7.2.1.1 |
wtWebGraphAnalog57662ReportTableList of settings depending on the Report number. SEQUENCE OF WtWebGraphAnalog57662ReportEntry .1.3.6.1.4.1.5040.1.2.29.3.1.7.3 |
wtWebGraphAnalog57662ReportEntryReport parameters of the individual Reports. WtWebGraphAnalog57662ReportEntry .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1 |
wtWebGraphAnalog57662ReportEnableBinr kodierte Triggerbedingungen:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Report enable
Bit 1-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.1 |
wtWebGraphAnalog57662ReportTimerCronThis entry defines a time window for alarm 1-8 and a activation time for the report.
A time window is definied by start and stop time stamp, seperated by a space or tab.
The activation time of the report is defined by a single start time stamp.
Each time stamp contains 5 space or tab seperated text fields for time trigger definition.
Each field must match with the actual time to trigger an action, weekday and day of month
are interpreted separatley.
1: Minutes Range 0-59
2. Hours Range 0-23, 0 is midnight
3: Day of month Range 1-31
4: Month Range 1-12
5: Weekday Range 0-6, 0 is sunday
Syntax for every field:
- an asterix (*) enables every possible setting of a field
- single numbers seperated by commas (i.e.: 2,14,22)
- a partition within the allowed range (i.e.: 1-5)
- step size within a partition of the allowed range (i.e.: 0-59/2 every second minute).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.2 |
wtWebGraphAnalog57662ReportMethodeEnableBinary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Mail Enable
Bit 1: SNMP Trap enable
Bit 2: TCP Client enable
Bit 3: Syslog enable
Bit 4: FTP Client enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.3 |
wtWebGraphAnalog57662ReportEMailAddrE-Mail address for sending the alarm mail to.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.8 |
wtWebGraphAnalog57662ReportMailSubjectSubject line for alarm mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.9 |
wtWebGraphAnalog57662ReportMailTextReport mail text: <Mn> provides the current temperature; n = 1..2.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.10 |
wtWebGraphAnalog57662ReportManagerIPName or IP address of the SNMP Manager which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.11 |
wtWebGraphAnalog57662ReportTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.12 |
wtWebGraphAnalog57662ReportMailOptionsBinary coded options:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Attach Thermo.csv Enable
Bit 1 : CSV-Data_since_last_report
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.13 |
wtWebGraphAnalog57662ReportTcpIpAddrName or IP address of the TCP server which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.14 |
wtWebGraphAnalog57662ReportTcpPortPort number of the TCP server which accepts the trap.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.15 |
wtWebGraphAnalog57662ReportTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.16 |
wtWebGraphAnalog57662ReportClearMailSubjectSubject line for alarm clear mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.17 |
wtWebGraphAnalog57662ReportClearMailTextReport clear mail text: <Mn> provides the current temperature; n = 1..2.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.18 |
wtWebGraphAnalog57662ReportClearTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.19 |
wtWebGraphAnalog57662ReportClearTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.20 |
wtWebGraphAnalog57662ReportSyslogIpAddrIP address of the syslog server to which the Webio device should send syslog messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.24 |
wtWebGraphAnalog57662ReportSyslogPortPort number of the syslog server to which the Webio device should send syslog messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.25 |
wtWebGraphAnalog57662ReportSyslogTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.26 |
wtWebGraphAnalog57662ReportSyslogClearTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body of a alarm clear message.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.27 |
wtWebGraphAnalog57662ReportFtpDataPortLocal data port: 1..65535 or AUTO: the next free port will be assigned.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.28 |
wtWebGraphAnalog57662ReportFtpFileNameName of the file including path informations.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.29 |
wtWebGraphAnalog57662ReportFtpTextMessage text to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.30 |
wtWebGraphAnalog57662ReportFtpClearTextReport clear message to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.31 |
wtWebGraphAnalog57662ReportFtpOptionBinary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : STORE
Bit 1 : APPEND
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.32 |
wtWebGraphAnalog57662Ports OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.2 |
wtWebGraphAnalog57662PortTableList of settings depending on the sensor number. SEQUENCE OF WtWebGraphAnalog57662PortEntry .1.3.6.1.4.1.5040.1.2.29.3.2.1 |
wtWebGraphAnalog57662PortEntrySensor parameters for the individual sensors. WtWebGraphAnalog57662PortEntry .1.3.6.1.4.1.5040.1.2.29.3.2.1.1 |
wtWebGraphAnalog57662PortNameName of the sensor.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.1 |
wtWebGraphAnalog57662PortTextDescription of the sensor.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.2 |
wtWebGraphAnalog57662PortOffset1Offset calibration: Offset in degrees with maximum 3 decimal places at set point 1.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.3 |
wtWebGraphAnalog57662SetPoint1Offset calibration: Reference set point 1 in degrees with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.4 |
wtWebGraphAnalog57662PortOffset2Offset calibration: Offset in degrees with maximum 3 decimal places at set point 2.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.5 |
wtWebGraphAnalog57662SetPoint2Offset calibration: Reference set point 2 in degrees with maximum 3 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.6 |
wtWebGraphAnalog57662PortCommentOffset calibration: informations of date, name of operator, reference devices.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.7 |
wtWebGraphAnalog57662PortSensorSelectBinary coded options for sensor 1:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : 0-20mA (default)
Bit 1 : 4-20mA
Bit 2 : Disconnect
Bit 3-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.8 |
wtWebGraphAnalog57662PortUnitUser scale: displayed unit.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.9 |
wtWebGraphAnalog57662PortScale0User scale: displayed value in 1/1000 at 0% full scale range.
Range: -999999.999 to 999999.999rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.10 |
wtWebGraphAnalog57662PortScale100User scale: displayed value in 1/1000 at 100% full scale range.
Range: -999999.999 to 999999.999rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.11 |
wtWebGraphAnalog57662PortOutputModeThis binary coded output mode defines the individual operation mode for any
output. More than one mode must not be selected. If an output mode is selected,
Bit 2 in wtWebGraphAnalog57662PortInputMode will be set automatically.
The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 6-7: unused
Bit 5 : Output OFF
Bit 4 : Binary 2
Bit 3 : Binary 1
Bit 2 : SNMP
Bit 1 : UDP ASCII
Bit 0 : HTTPrw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.12 |
wtWebGraphAnalog57662PortInputModeThis binary coded input mode defines the individual operation mode for any
input. More than one mode must not be selected. If an input mode is selected,
Bit 5 in wtWebGraphAnalog57662PortOutputMode will be set automatically.
The OCTETS are interpreted bit-by-bit,Bit 0 corresponds to the LSB.
OCTET 1: ungenutzt
OCTET 2: ungenutzt
OCTET 3: ungenutzt
OCTET 4: Bit 3-7: unused
Bit 2 : I-Output
Bit 1 : I-Input, active
Bit 0 : I-Input, passiverw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.13 |
wtWebGraphAnalog57662PortCompensationValueThis entry is used to optimize the step response with capcitive loads.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.14 |
wtWebGraphAnalog57662PortCompensationModeThis binary coded compensation mode defines the individual operation mode for any
output. If Auto adaptive is selected, the optimal value of wtWebGraphAnalog57662PortCompensationValue
will be determinate continuously. Set Bit 1 to start with the last saved value of
wtWebGraphAnalog57662PortCompensationValue in this Mode.
If Bit 0 is cleared and Auto Mode is off wtWebGraphAnalog57662PortCompensationValue
will allways be used, regardless of the state of Bit 1.
The OCTETS are interpreted bit-by-bit,Bit 0 corresponds to the LSB.
OCTET 1: ungenutzt
OCTET 2: ungenutzt
OCTET 3: ungenutzt
OCTET 4: Bit 2-7: unused
Bit 1 : Use saved value at power on
Bit 0 : Auto adaptive enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.2.1.1.15 |
wtWebGraphAnalog57662Manufact OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.3.3 |
wtWebGraphAnalog57662MfNameManufacturer company namerw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.3.1 |
wtWebGraphAnalog57662MfAddrManufacturer address.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.3.2 |
wtWebGraphAnalog57662MfHotlineManufacturer hotline.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.3.3 |
wtWebGraphAnalog57662MfInternetManufacturer Internet address.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.3.4 |
wtWebGraphAnalog57662MfDeviceTypManufacturer device name (model number).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.3.5 |
wtWebGraphAnalog57662MfOrderNoManufacturer part number.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.29.3.3.6 |
wtWebGraphAnalog57662Diag OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.29.4 |
wtWebGraphAnalog57662DiagErrorCountNumber of entries in the error memory.ro INTEGER .1.3.6.1.4.1.5040.1.2.29.4.1 |
wtWebGraphAnalog57662DiagBinaryErrorError causes coded bit-by-bit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.29.4.2 |
wtWebGraphAnalog57662DiagErrorIndexThe value of this variable is used as an index to read
an error massege from wtWebGraphAnalog57662DiagErrorMessage.
Errors are numbered from 1 to wtWebGraphAnalog57662DiagErrorCount.
Writing a valid value into this variable, making the appropriate
message readable from wtWebGraphAnalog57662DiagErrorMessage.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.4.3 |
wtWebGraphAnalog57662DiagErrorMessageUsing wtWebGraphAnalog57662DiagErrorIndex as an index, the appropriate message is available.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.29.4.4 |
wtWebGraphAnalog57662DiagErrorClearWriting 1 into this variable clears all diagnosis messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.29.4.5 |