WebGraph-AnalogIn-57641-US-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for WebGraph-AnalogIn-57641-US-MIB.
227
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
227 total| Object Name |
|---|
wut OBJECT IDENTIFIER .1.3.6.1.4.1.5040 |
IMPORTS Unknown .1.3.6.1.4.1.5040 |
wtComServer OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1 |
wtWebio OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2 |
wtWebGraphAnalogIn57641 OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10 |
wtWebGraphAnalogIn57641Alert1This SNMP trap is generated when Alarm 1 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.31 |
wtWebGraphAnalogIn57641Alert2This SNMP trap is generated when Alarm 2 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.32 |
wtWebGraphAnalogIn57641Alert3This SNMP trap is generated when Alarm 3 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.33 |
wtWebGraphAnalogIn57641Alert4This SNMP trap is generated when Alarm 4 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.34 |
wtWebGraphAnalogIn57641Alert5This SNMP trap is generated when Alarm 5 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.35 |
wtWebGraphAnalogIn57641Alert6This SNMP trap is generated when Alarm 6 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.36 |
wtWebGraphAnalogIn57641Alert7This SNMP trap is generated when Alarm 7 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.37 |
wtWebGraphAnalogIn57641Alert8This SNMP trap is generated when Alarm 8 was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.38 |
wtWebGraphAnalogIn57641Alert9This SNMP trap is generated when Alarm 1 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.91 |
wtWebGraphAnalogIn57641Alert10This SNMP trap is generated when Alarm 2 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.92 |
wtWebGraphAnalogIn57641Alert11This SNMP trap is generated when Alarm 3 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.93 |
wtWebGraphAnalogIn57641Alert12This SNMP trap is generated when Alarm 4 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.94 |
wtWebGraphAnalogIn57641Alert13This SNMP trap is generated when Alarm 5 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.95 |
wtWebGraphAnalogIn57641Alert14This SNMP trap is generated when Alarm 6 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.96 |
wtWebGraphAnalogIn57641Alert15This SNMP trap is generated when Alarm 7 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.97 |
wtWebGraphAnalogIn57641Alert16This SNMP trap is generated when Alarm 8 was cleared,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.98 |
wtWebGraphAnalogIn57641AlertDiagThis SNMP trap is generated when a diagnosis/error message was triggered,
SNMP trap enable is set and
SNMP is enabled. TRAP-TYPE .1.3.6.1.4.1.5040.1.2.10.0.110 |
wtWebGraphAnalogIn57641Inventory OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.1 |
wtWebGraphAnalogIn57641SensorsNumber of sensorsro INTEGER .1.3.6.1.4.1.5040.1.2.10.1.1 |
wtWebGraphAnalogIn57641SensorTableList of sensors. SEQUENCE OF WtWebGraphAnalogIn57641SensorEntry .1.3.6.1.4.1.5040.1.2.10.1.2 |
wtWebGraphAnalogIn57641SensorEntryList of sensor numbers. WtWebGraphAnalogIn57641SensorEntry .1.3.6.1.4.1.5040.1.2.10.1.2.1 |
wtWebGraphAnalogIn57641SensorNoSensor number.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.1.2.1.1 |
wtWebGraphAnalogIn57641ValuesTableList of measurement values corresponding to the channel numbers. SEQUENCE OF WtWebGraphAnalogIn57641ValuesEntry .1.3.6.1.4.1.5040.1.2.10.1.3 |
wtWebGraphAnalogIn57641ValuesEntryMeasurement values of the sensors. WtWebGraphAnalogIn57641ValuesEntry .1.3.6.1.4.1.5040.1.2.10.1.3.1 |
wtWebGraphAnalogIn57641ValuesMeasurement value of the sensor, ASCII, 7 characters in length.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.10.1.3.1.1 |
wtWebGraphAnalogIn57641BinaryValuesTableList of binary measurement values corresponding to the channel numbers. SEQUENCE OF WtWebGraphAnalogIn57641BinaryValuesEntry .1.3.6.1.4.1.5040.1.2.10.1.4 |
wtWebGraphAnalogIn57641BinaryValuesEntryBinary measurement values of the sensors. WtWebGraphAnalogIn57641BinaryValuesEntry .1.3.6.1.4.1.5040.1.2.10.1.4.1 |
wtWebGraphAnalogIn57641BinaryValuesBinary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent,
signed number, 0x4FFF6 indicates an
invalid measured value.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.1.4.1.1 |
wtWebGraphAnalogIn57641SessCntrl OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.2 |
wtWebGraphAnalogIn57641SessCntrlPasswordEntering this password opens a session which is ended by writing a 1 to
wtWebGraphAnalogIn57641SessCntrlLogout. When read this variable provides a string of
length zero.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.2.1 |
wtWebGraphAnalogIn57641SessCntrlConfigModeWhen the device is in SNMP configuration mode, the value 1 is
returned, otherwise 0. If the read value is 0 even though the
password was written, the device is already in config mode and the
variables can only be read.ro Enumeration .1.3.6.1.4.1.5040.1.2.10.2.2 |
wtWebGraphAnalogIn57641SessCntrlLogoutIf the device is in configuration mode and the session was opened by
this SNMP Manager, writing a 1 to this variable will end the session
and all parameters are stored.
Writing a 2 discards all entries again.
When read this variable provides the value 0.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.2.3 |
wtWebGraphAnalogIn57641SessCntrlAdminPasswordThis password protects access to the variables with administrator rights.
It can only be changed by the administrator. If no password was assigned,
the valid password is public.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.2.4 |
wtWebGraphAnalogIn57641SessCntrlConfigPasswordThis password protects access to the variables with configurator rights. It can
be changed by the administrator and by the configurator. If no password was assigned,
the valid password is public. When read this variable provides a null-pointer.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.2.5 |
wtWebGraphAnalogIn57641Config OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3 |
wtWebGraphAnalogIn57641Device OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1 |
wtWebGraphAnalogIn57641Text OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.1 |
wtWebGraphAnalogIn57641DeviceNameName of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.1.1 |
wtWebGraphAnalogIn57641DeviceTextDescription of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.1.2 |
wtWebGraphAnalogIn57641DeviceLocationDescription of the location of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.1.3 |
wtWebGraphAnalogIn57641DeviceContactContact address of the system operator of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.1.4 |
wtWebGraphAnalogIn57641TimeDate OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.2 |
wtWebGraphAnalogIn57641TimeZone OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.2.1 |
wtWebGraphAnalogIn57641TzOffsetHrsOffset hours for the time zone (winter time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.1 |
wtWebGraphAnalogIn57641TzOffsetMinOffset minutes for the time zone (winter time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.2 |
wtWebGraphAnalogIn57641TzEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Timezonerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.3 |
wtWebGraphAnalogIn57641StTzOffsetHrsOffset hours of the time zone (summer time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.4 |
wtWebGraphAnalogIn57641StTzOffsetMinOffset minutes of the time zone (summer time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.5 |
wtWebGraphAnalogIn57641StTzEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Summertimerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.6 |
wtWebGraphAnalogIn57641StTzStartMonthMonth in which the change is made from winter time to summer time.rw Enumeration .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.7 |
wtWebGraphAnalogIn57641StTzStartModeMode of the day of the week for which the change is made from winter time to summer time.rw Enumeration .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.8 |
wtWebGraphAnalogIn57641StTzStartWdayDay of the week on which the change is made from winter time to summer timerw Enumeration .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.9 |
wtWebGraphAnalogIn57641StTzStartHrsHour in which the time zone is changed from winter to summer time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.10 |
wtWebGraphAnalogIn57641StTzStartMinMinute in which the time zone is changed from winter to summer time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.11 |
wtWebGraphAnalogIn57641StTzStopMonthMonth in which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.12 |
wtWebGraphAnalogIn57641StTzStopModeMode of the week day on which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.13 |
wtWebGraphAnalogIn57641StTzStopWdayDay of the week on which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.14 |
wtWebGraphAnalogIn57641StTzStopHrsHour at which the time zone is changed from summer to winter time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.15 |
wtWebGraphAnalogIn57641StTzStopMinMinute at which the time zone is changed from summer to winter time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.1.16 |
wtWebGraphAnalogIn57641TimeServer OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.2.2 |
wtWebGraphAnalogIn57641TimeServer1IP address or name of the 1st time server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.2.2.1 |
wtWebGraphAnalogIn57641TimeServer2IP address or name of the 2nd time server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.2.2.2 |
wtWebGraphAnalogIn57641TsEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Time Serverrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.2.2.3 |
wtWebGraphAnalogIn57641TsSyncTimeDaily synchronisation time with the time server (hour: 0-23).rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.2.4 |
wtWebGraphAnalogIn57641DeviceClock OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.2.3 |
wtWebGraphAnalogIn57641ClockHrsClock hours taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.3.1 |
wtWebGraphAnalogIn57641ClockMinClock minutes taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.3.2 |
wtWebGraphAnalogIn57641ClockDayDate: Day of the month, taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.3.3 |
wtWebGraphAnalogIn57641ClockMonthDate: Month, taking into account the time zone settings.rw Enumeration .1.3.6.1.4.1.5040.1.2.10.3.1.2.3.4 |
wtWebGraphAnalogIn57641ClockYearDate: Year, taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.2.3.5 |
wtWebGraphAnalogIn57641Basic OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.3 |
wtWebGraphAnalogIn57641Network OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.3.1 |
wtWebGraphAnalogIn57641IpAddressIP address of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.10.3.1.3.1.1 |
wtWebGraphAnalogIn57641SubnetMaskSubnet mask of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.10.3.1.3.1.2 |
wtWebGraphAnalogIn57641GatewayGateway of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.10.3.1.3.1.3 |
wtWebGraphAnalogIn57641DnsServer1IP address of the 1st DNS server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.1.4 |
wtWebGraphAnalogIn57641DnsServer2IP address of the 2nd DNS server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.1.5 |
wtWebGraphAnalogIn57641AddConfigAdditional configuration (1=ON):
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1: DHCP disable
Bit 0: BOOTP disablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.1.6 |
wtWebGraphAnalogIn57641HTTP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.3.2 |
wtWebGraphAnalogIn57641StartupBinary coded start page:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1: Index.htm
Bit 2: Home.htm
Bit 3: User.htm
Only one page may be selected at a time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.2.1 |
wtWebGraphAnalogIn57641GetHeaderEnableIf these bits are set, every answer of a short form GET question will be lead
by the IP-address and name of the device and/or a HTTP header:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-6: unused
Bit 1 : GET HTTP enable
Bit 0 : GET Header enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.2.2 |
wtWebGraphAnalogIn57641HttpPortDefinition of the standard HTML port (Default: 80).rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.3.2.3 |
wtWebGraphAnalogIn57641Mail OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.3.3 |
wtWebGraphAnalogIn57641MailAdNameDevice name for mail administration.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.3.1 |
wtWebGraphAnalogIn57641MailReplyReply address for the mail server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.3.2 |
wtWebGraphAnalogIn57641MailServerName or IP address of the mail server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.3.3 |
wtWebioAn1MailEnableSet this bit to enable the sending of mails:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Mail enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.3.4 |
wtWebGraphAnalogIn57641MailAuthenticationSelection of the authentication modi:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : POP3 before SMTP
Bit 1 : ESMTP, authentication
Bit 0 : SMTP, no authenticationrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.3.5 |
wtWebGraphAnalogIn57641MailAuthUserName of the user to be authenticated.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.3.6 |
wtWebGraphAnalogIn57641MailAuthPasswordAuthentication password.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.3.7 |
wtWebGraphAnalogIn57641MailPop3ServerName or Ip-address of the POP3 Servers.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.3.8 |
wtWebGraphAnalogIn57641SNMP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.3.4 |
wtWebGraphAnalogIn57641SnmpCommunityStringReadCommunity string read onlyrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.4.1 |
wtWebGraphAnalogIn57641SnmpCommunityStringReadWriteCommunity string read / writerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.4.2 |
wtWebGraphAnalogIn57641SystemTrapManagerIPName or IP address of the TCP server which accepts the system trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.4.3 |
wtWebGraphAnalogIn57641SystemTrapEnableBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: ColdStart
Bit 1: WarmStart
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.4.4 |
wtWebGraphAnalogIn57641SnmpEnableSet bit 0 to enable SNMP.
If disabled, the device did not respond to any SNMP requests.
Bit 1 decided wether the community string of read operations
is compared with the system password or not:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : SNMP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.4.5 |
wtWebGraphAnalogIn57641SnmpCommunityStringTrapCommunity string send within traps.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.4.6 |
wtWebGraphAnalogIn57641UDP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.3.5 |
wtWebGraphAnalogIn57641UdpPortUdp port to which the Udp queries ( short form GET requests) can be sent. This
port number must be unique within the device.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.3.5.1 |
wtWebGraphAnalogIn57641UdpEnableSet this bit to enable UDP support:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : UDP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.5.2 |
wtWebGraphAnalogIn57641Syslog OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.3.6 |
wtWebGraphAnalogIn57641SyslogServerIPName or IP address of the Syslog server, which accepts the Syslog messgaes.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.6.1 |
wtWebGraphAnalogIn57641SyslogServerPortPortnumber of the Syslog servers, default 514.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.3.6.2 |
wtWebGraphAnalogIn57641SyslogSystemMessagesEnableBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: ColdStart
Bit 1: WarmStart
Bit 2: Diag Messages
Bit 3-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.6.3 |
wtWebGraphAnalogIn57641SyslogEnableSet bit 0to enable Syslog:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Syslog enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.6.4 |
wtWebGraphAnalogIn57641FTP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.3.7 |
wtWebGraphAnalogIn57641FTPServerIPName or IP address of the FTP server, which accepts the FTP messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.7.1 |
wtWebGraphAnalogIn57641FTPServerControlPortPortnumber of the control port of the FTP server, default 21.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.3.7.2 |
wtWebGraphAnalogIn57641FTPUserNameFTP Loggin: user name.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.7.3 |
wtWebGraphAnalogIn57641FTPPasswordFTP Loggin: user password.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.7.4 |
wtWebGraphAnalogIn57641FTPAccountFTP Loggin: name of account.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.7.5 |
wtWebGraphAnalogIn57641FTPOptionBit 0 switches the FTP Server in Passiv-Mode,
the Client controls the data connection on its own:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : PASV enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.7.6 |
wtWebGraphAnalogIn57641FTPEnableSet Bit 0 to enable FTP:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : FTP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.3.7.7 |
wtWebGraphAnalogIn57641Datalogger OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.4 |
wtWebGraphAnalogIn57641LoggerTimebaseTime base of the data loggerrw Enumeration .1.3.6.1.4.1.5040.1.2.10.3.1.4.1 |
wtWebGraphAnalogIn57641LoggerSensorSelBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.4.2 |
wtWebGraphAnalogIn57641DisplaySensorSelBinary coded sensor selection:
only selected sensors will be shown in the graphical presentation:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.4.3 |
wtWebGraphAnalogIn57641SensorColorTableList of sensor colors for the praphical presentation. SEQUENCE OF WtWebGraphAnalogIn57641SensorColorEntry .1.3.6.1.4.1.5040.1.2.10.3.1.4.4 |
wtWebGraphAnalogIn57641SensorColorEntryIndex numbers of the sensors. WtWebGraphAnalogIn57641SensorColorEntry .1.3.6.1.4.1.5040.1.2.10.3.1.4.4.1 |
wtWebGraphAnalogIn57641SensorColorColor of the sensors at the praphical presention.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.4.4.1.1 |
wtWebGraphAnalogIn57641AutoScaleEnableIf bit 0 is set, vertical auto scale is enabled:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Auto Scale enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.4.5 |
wtWebGraphAnalogIn57641VerticalUpperLimitThis value defines the maximum temperature shown in the graphical presentation,
if no auto scaling is selected.
Temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.4.6 |
wtWebGraphAnalogIn57641VerticalLowerLimitThis value defines the minimum temperature shown in the graphical presentation,
if no auto scaling is selected.
Temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.4.7 |
wtWebGraphAnalogIn57641HorizontalZoomDefines the default zoom stage, if no auto scaling is selected.rw Enumeration .1.3.6.1.4.1.5040.1.2.10.3.1.4.8 |
wtWebGraphAnalogIn57641Alarm OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.5 |
wtWebGraphAnalogIn57641AlarmCountNumber of independent alarms.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.5.1 |
wtWebGraphAnalogIn57641AlarmIfTableList of alarm indices. SEQUENCE OF WtWebGraphAnalogIn57641AlarmIfEntry .1.3.6.1.4.1.5040.1.2.10.3.1.5.2 |
wtWebGraphAnalogIn57641AlarmIfEntryNumbers of the alarms. WtWebGraphAnalogIn57641AlarmIfEntry .1.3.6.1.4.1.5040.1.2.10.3.1.5.2.1 |
wtWebGraphAnalogIn57641AlarmNoAlarm number.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.5.2.1.1 |
wtWebGraphAnalogIn57641AlarmTableList of settings depending on the alarm number. SEQUENCE OF WtWebGraphAnalogIn57641AlarmEntry .1.3.6.1.4.1.5040.1.2.10.3.1.5.3 |
wtWebGraphAnalogIn57641AlarmEntryAlarm parameters of the individual alarms. WtWebGraphAnalogIn57641AlarmEntry .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1 |
wtWebGraphAnalogIn57641AlarmTriggerBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3:
Bit 0: Timer
Bit 1: ColdStart
Bit 2: WarmStart
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.1 |
wtWebGraphAnalogIn57641AlarmMinMinimum temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.2 |
wtWebGraphAnalogIn57641AlarmMaxMaximum temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.3 |
wtWebGraphAnalogIn57641AlarmHysteresisTemperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.)
, in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.4 |
wtWebGraphAnalogIn57641AlarmDelayAlarm will be delayed by setting this time while stable alarm
condition occur (time in minutes).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.5 |
wtWebGraphAnalogIn57641AlarmIntervalSend interval for alarm messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.6 |
wtWebGraphAnalogIn57641AlarmEnableBinary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Mail Enable
Bit 1: SNMP Trap enable
Bit 2: TCP Client enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.7 |
wtWebGraphAnalogIn57641AlarmEMailAddrE-Mail address for sending the alarm mail to.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.8 |
wtWebGraphAnalogIn57641AlarmMailSubjectSubject line for alarm mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.9 |
wtWebGraphAnalogIn57641AlarmMailTextAlarm mail text: <Tn> provides the current temperature; n = 1..8.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.10 |
wtWebGraphAnalogIn57641AlarmManagerIPName or IP address of the SNMP Manager which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.11 |
wtWebGraphAnalogIn57641AlarmTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.12 |
wtWebGraphAnalogIn57641AlarmMailOptionsBinary coded options:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Attach Thermo.csv Enable
Bit 1 : CSV-Data_since_last_report
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.13 |
wtWebGraphAnalogIn57641AlarmTcpIpAddrName or IP address of the TCP server which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.14 |
wtWebGraphAnalogIn57641AlarmTcpPortPort number of the TCP server which accepts the trap.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.15 |
wtWebGraphAnalogIn57641AlarmTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.16 |
wtWebGraphAnalogIn57641AlarmClearMailSubjectSubject line for alarm clear mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.17 |
wtWebGraphAnalogIn57641AlarmClearMailTextAlarm clear mail text: <Tn> provides the current temperature; n = 1..8.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.18 |
wtWebGraphAnalogIn57641AlarmClearTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.19 |
wtWebGraphAnalogIn57641AlarmClearTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.20 |
wtWebGraphAnalogIn57641Alarm2MinMinimum rel. Humidity in percent with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.21 |
wtWebGraphAnalogIn57641Alarm2MaxMaximum rel.Humidity in percent with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.22 |
wtWebGraphAnalogIn57641Alarm2HysteresisHysterese rel. Humidity in percent with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.23 |
wtWebGraphAnalogIn57641AlarmSyslogIpAddrIP address of the syslog server to which the Webio device should send syslog messages.rw IpAddress .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.24 |
wtWebGraphAnalogIn57641AlarmSyslogPortPort number of the syslog server to which the Webio device should send syslog messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.25 |
wtWebGraphAnalogIn57641AlarmSyslogTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.26 |
wtWebGraphAnalogIn57641AlarmSyslogClearTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body of a alarm clear message.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.27 |
wtWebGraphAnalogIn57641AlarmFtpDataPortLocal data port: 1..65535 or AUTO: the next free port will be assigned.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.28 |
wtWebGraphAnalogIn57641AlarmFtpFileNameName of the file including path informations.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.29 |
wtWebGraphAnalogIn57641AlarmFtpTextMessage text to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.30 |
wtWebGraphAnalogIn57641AlarmFtpClearTextAlarm clear message to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.31 |
wtWebGraphAnalogIn57641AlarmFtpOptionBinary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : STORE
Bit 1 : APPEND
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.32 |
wtWebGraphAnalogIn57641AlarmTimerCronThis entry contains 5 space or tab seperated text fields for time trigger definition.
Each field must match with the actual time to trigger a message, weekday and day of month
are interpreted separatley.
1: Minutes Range 0-59
2. Hours Range 0-23, 0 is midnight
3: Day of month Range 1-31
4: Month Range 1-12
5: Weekday Range 0-6, 0 is sunday
Syntax for every field:
- an asterix (*) enables every possible setting of a field
- single numbers seperated by commas
- a partition within the allowed range (1-5)
- step size within an partition of the allowed range (0-59/2: every second minute).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.33 |
wtWebGraphAnalogIn57641Graphics OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.6 |
wtWebGraphAnalogIn57641GraphicsBase OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.6.1 |
wtWebGraphAnalogIn57641GraphicsBaseEnableDefines the viewing options of the graphic:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Auto scroll enable
Bit 1 : Show table
Bit 2 : Show graph
Bit 3 : Show control buttons
Bit 4 : Show config menu
Bit 5-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.1.1 |
wtWebGraphAnalogIn57641GraphicsBaseWidthDefines the width of the graphic in pixels.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.6.1.2 |
wtWebGraphAnalogIn57641GraphicsBaseHeightDefines the height of the graphic in pixels.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.6.1.3 |
wtWebGraphAnalogIn57641GraphicsBaseFrameColorFrame color definition in RGB.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.1.4 |
wtWebGraphAnalogIn57641GraphicsBaseBackgroundColorBackground color definition in RGB.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.1.5 |
wtWebGraphAnalogIn57641GraphicsBasePollingrateDefines the pollingrate in seconds,
which defines the refreshing intervall of the graphic.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.6.1.6 |
wtWebGraphAnalogIn57641GraphicsSelect OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.6.2 |
wtWebGraphAnalogIn57641GraphicsSelectDisplaySensorSelBinary coded sensor selection:
only selected sensors will be shown in the graphical presentation:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2: Sensor 3
Bit 3: Sensor 4
Bit 4: Sensor 5
Bit 5: Sensor 6
Bit 6: Sensor 7
Bit 7: Sensor 8rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.2.1 |
wtWebGraphAnalogIn57641GraphicsSelectDisplayShowExtremBinary coded sensor selection:
only selected sensors will be shown with minima and maxima:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2: Sensor 3
Bit 3: Sensor 4
Bit 4: Sensor 5
Bit 5: Sensor 6
Bit 6: Sensor 7
Bit 7: Sensor 8rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.2.2 |
wtWebGraphAnalogIn57641SensorColor2TableList of sensor colors for the praphical presentation. SEQUENCE OF WtWebGraphAnalogIn57641SensorColor2Entry .1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3 |
wtWebGraphAnalogIn57641SensorColor2EntryNumbers of the sensors. WtWebGraphAnalogIn57641SensorColor2Entry .1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1 |
wtWebGraphAnalogIn57641GraphicsSensorColorColor of the sensors at the praphical presention.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1.1 |
wtWebGraphAnalogIn57641GraphicsSelectScaleAssignes one of 4 scales to a sensor:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Use Scale 1
Bit 1 : Use Scale 2
Bit 2 : Use Scale 3
Bit 3 : Use Scale 4
Bit 4-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1.2 |
wtWebGraphAnalogIn57641GraphicsScale OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.1.6.3 |
wtWebGraphAnalogIn57641GraphicsScaleAutoScaleEnableSelect the Auto Scale Mode:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Scale 1 Auto scale enable
Bit 1 : Scale 2 Auto scale enable
Bit 2 : Scale 3 Auto scale enable
Bit 3 : Scale 4 Auto scale enable
Bit 4-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.1 |
wtWebGraphAnalogIn57641GraphicsScaleAutoFitEnableSelect the Auto Fit Mode::
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Scale 1 Auto fit enable
Bit 1 : Scale 2 Auto fit enable
Bit 2 : Scale 3 Auto fit enable
Bit 3 : Scale 4 Auto fit enable
Bit 4-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.2 |
wtWebGraphAnalogIn57641GraphicsScale1MinScale 1: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.3 |
wtWebGraphAnalogIn57641GraphicsScale2MinScale 2: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.4 |
wtWebGraphAnalogIn57641GraphicsScale3MinScale 3: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.5 |
wtWebGraphAnalogIn57641GraphicsScale4MinScale 4: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.6 |
wtWebGraphAnalogIn57641GraphicsScale1MaxScale 1: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.7 |
wtWebGraphAnalogIn57641GraphicsScale2MaxScale 2: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.8 |
wtWebGraphAnalogIn57641GraphicsScale3MaxScale 3: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.9 |
wtWebGraphAnalogIn57641GraphicsScale4MaxScale 4: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.10 |
wtWebGraphAnalogIn57641GraphicsScale1UnitScale 1: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.11 |
wtWebGraphAnalogIn57641GraphicsScale2UnitScale 2: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.12 |
wtWebGraphAnalogIn57641GraphicsScale3UnitScale 3: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.13 |
wtWebGraphAnalogIn57641GraphicsScale4UnitScale 4: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.1.6.3.14 |
wtWebGraphAnalogIn57641Ports OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.2 |
wtWebGraphAnalogIn57641PortTableList of settings depending on the sensor number. SEQUENCE OF WtWebGraphAnalogIn57641PortEntry .1.3.6.1.4.1.5040.1.2.10.3.2.1 |
wtWebGraphAnalogIn57641PortEntrySensor parameters for the individual sensors. WtWebGraphAnalogIn57641PortEntry .1.3.6.1.4.1.5040.1.2.10.3.2.1.1 |
wtWebGraphAnalogIn57641PortNameName of the sensor.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.2.1.1.1 |
wtWebGraphAnalogIn57641PortTextDescription of the sensor.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.2.1.1.2 |
wtWebGraphAnalogIn57641PortOffset1Offset calibration: Offset in degrees with maximum 2 decimal places at set point 1.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.2.1.1.3 |
wtWebGraphAnalogIn57641SetPoint1Offset calibration: set point 1 in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.2.1.1.4 |
wtWebGraphAnalogIn57641PortOffset2Offset calibration: Offset in degrees with maximum 2 decimal places at set point 2.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.2.1.1.5 |
wtWebGraphAnalogIn57641SetPoint2Offset calibration: set point 2 in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.2.1.1.6 |
wtWebGraphAnalogIn57641PortCommentOffset calibration: informations of date, name of operator, reference devices.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.2.1.1.7 |
wtWebGraphAnalogIn57641PortSensorSelectBinary coded options for sensor 1:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : 0-20mA (default)
Bit 1 : 4-20mA
Bit 2 : Disconnect
Bit 3-7: unused
Binary coded options for sensor 2:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : 0-10V (default)
Bit 1 : Disconnect
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.2.1.1.8 |
wtWebGraphAnalogIn57641PortUnitUser scale: displayed unit.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.2.1.1.9 |
wtWebGraphAnalogIn57641PortScale0User scale: displayed value in 1/1000 at 0% full scale range.
Range: -999999.999 to 999999.999rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.2.1.1.10 |
wtWebGraphAnalogIn57641PortScale100User scale: displayed value in 1/1000 at 100% full scale range.
Range: -999999.999 to 999999.999rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.2.1.1.11 |
wtWebGraphAnalogIn57641Manufact OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.3.3 |
wtWebGraphAnalogIn57641MfNameManufacturer company namerw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.3.1 |
wtWebGraphAnalogIn57641MfAddrManufacturer address.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.3.2 |
wtWebGraphAnalogIn57641MfHotlineManufacturer hotline.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.3.3 |
wtWebGraphAnalogIn57641MfInternetManufacturer Internet address.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.3.4 |
wtWebGraphAnalogIn57641MfDeviceTypManufacturer device name (model number).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.3.5 |
wtWebGraphAnalogIn57641MfOrderNoManufacturer part number.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.10.3.3.6 |
wtWebGraphAnalogIn57641Diag OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.10.4 |
wtWebGraphAnalogIn57641DiagErrorCountNumber of entries in the error memory.ro INTEGER .1.3.6.1.4.1.5040.1.2.10.4.1 |
wtWebGraphAnalogIn57641DiagBinaryErrorError causes coded bit-by-bit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.10.4.2 |
wtWebGraphAnalogIn57641DiagErrorIndexThe value of this variable is used as an index to read
an error massege from wtWebGraphAnalogIn57641DiagErrorMessage.
Errors are numbered from 1 to wtWebGraphAnalogIn57641DiagErrorCount.
Writing a valid value into this variable, making the appropriate
message readable from wtWebGraphAnalogIn57641DiagErrorMessage.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.4.3 |
wtWebGraphAnalogIn57641DiagErrorMessageUsing wtWebGraphAnalogIn57641DiagErrorIndex as an index, the appropriate message is available.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.10.4.4 |
wtWebGraphAnalogIn57641DiagErrorClearWriting 1 into this variable clears all diagnosis messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.10.4.5 |