WebGraph-8xThermometer-US-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for WebGraph-8xThermometer-US-MIB.
205
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
205 total| Object Name |
|---|
wut OBJECT IDENTIFIER .1.3.6.1.4.1.5040 |
IMPORTS Unknown .1.3.6.1.4.1.5040 |
wtComServer OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1 |
wtWebio OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2 |
wtWebioAn8Graph OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6 |
wtWebioAn8GraphTemp OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.1 |
wtWebioAn8GraphSensorsNumber of temperature sensorsro INTEGER .1.3.6.1.4.1.5040.1.2.6.1.1 |
wtWebioAn8GraphSensorTableList of sensors. SEQUENCE OF WtWebioAn8GraphSensorEntry .1.3.6.1.4.1.5040.1.2.6.1.2 |
wtWebioAn8GraphSensorEntryTemperature sensor numbers. WtWebioAn8GraphSensorEntry .1.3.6.1.4.1.5040.1.2.6.1.2.1 |
wtWebioAn8GraphSensorNoTemperature sensor number.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.1.2.1.1 |
wtWebioAn8GraphTempValueTableList of temperature values corresponding to the channel numbers. SEQUENCE OF WtWebioAn8GraphTempValueEntry .1.3.6.1.4.1.5040.1.2.6.1.3 |
wtWebioAn8GraphTempValueEntryTemperatures of the sensors. WtWebioAn8GraphTempValueEntry .1.3.6.1.4.1.5040.1.2.6.1.3.1 |
wtWebioAn8GraphTempValueTemperature value of the sensor, ASCII, 5 characters in length.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.6.1.3.1.1 |
wtWebioAn8GraphBinaryTempValueTableList of binary temperature values corresponding to the channel numbers. SEQUENCE OF WtWebioAn8GraphBinaryTempValueEntry .1.3.6.1.4.1.5040.1.2.6.1.4 |
wtWebioAn8GraphBinaryTempValueEntryBinary temperature values of the sensors. WtWebioAn8GraphBinaryTempValueEntry .1.3.6.1.4.1.5040.1.2.6.1.4.1 |
wtWebioAn8GraphBinaryTempValueBinary temperature value of the sensor in 1/10 degrees Celsius,
signed number, 0x4FFF6 indicates an
invalid measured value.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.1.4.1.1 |
wtWebioAn8GraphTempValuePktTableList of temperature values corresponding to the channel numbers. SEQUENCE OF WtWebioAn8GraphTempValuePktEntry .1.3.6.1.4.1.5040.1.2.6.1.8 |
wtWebioAn8GraphTempValuePktEntryTemperatures of the sensors. WtWebioAn8GraphTempValuePktEntry .1.3.6.1.4.1.5040.1.2.6.1.8.1 |
wtWebioAn8GraphTempValuePktTemperature value of the sensor, ASCII, 5 characters in length, decimal point.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.6.1.8.1.1 |
wtWebioAn8GraphSessCntrl OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.2 |
wtWebioAn8GraphSessCntrlPasswordEntering this password opens a session which is ended by writing a 1 to
wtWebioAn8GraphSessCntrlLogout. When read this variable provides a string of
length zero.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.2.1 |
wtWebioAn8GraphSessCntrlConfigModeWhen the device is in SNMP configuration mode, the value 1 is
returned, otherwise 0. If the read value is 0 even though the
password was written, the device is already in config mode and the
variables can only be read.ro Enumeration .1.3.6.1.4.1.5040.1.2.6.2.2 |
wtWebioAn8GraphSessCntrlLogoutIf the device is in configuration mode and the session was opened by
this SNMP Manager, writing a 1 to this variable will end the session
and all parameters are stored.
Writing a 2 discards all entries again.
When read this variable provides the value 0.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.2.3 |
wtWebioAn8GraphSessCntrlAdminPasswordThis password protects access to the variables with administrator rights.
It can only be changed by the administrator. If no password was assigned,
the valid password is public.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.2.4 |
wtWebioAn8GraphSessCntrlConfigPasswordThis password protects access to the variables with configurator rights. It can
be changed by the administrator and by the configurator. If no password was assigned,
the valid password is public. When read this variable provides a null-pointer.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.2.5 |
wtWebioAn8GraphConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3 |
wtWebioAn8GraphDevice OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1 |
wtWebioAn8GraphText OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.1 |
wtWebioAn8GraphDeviceNameName of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.1.1 |
wtWebioAn8GraphDeviceTextDescription of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.1.2 |
wtWebioAn8GraphDeviceLocationDescription of the location of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.1.3 |
wtWebioAn8GraphDeviceContactContact address of the system operator of the Webio, which is user definable.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.1.4 |
wtWebioAn8GraphTimeDate OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.2 |
wtWebioAn8GraphTimeZone OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.2.1 |
wtWebioAn8GraphTzOffsetHrsOffset hours for the time zone (winter time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.1 |
wtWebioAn8GraphTzOffsetMinOffset minutes for the time zone (winter time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.2 |
wtWebioAn8GraphTzEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Timezonerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.3 |
wtWebioAn8GraphStTzOffsetHrsOffset hours of the time zone (summer time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.4 |
wtWebioAn8GraphStTzOffsetMinOffset minutes of the time zone (summer time) with respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.5 |
wtWebioAn8GraphStTzEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Summertimerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.6 |
wtWebioAn8GraphStTzStartMonthMonth in which the change is made from winter time to summer time.rw Enumeration .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.7 |
wtWebioAn8GraphStTzStartModeMode of the day of the week for which the change is made from winter time to summer time.rw Enumeration .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.8 |
wtWebioAn8GraphStTzStartWdayDay of the week on which the change is made from winter time to summer timerw Enumeration .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.9 |
wtWebioAn8GraphStTzStartHrsHour in which the time zone is changed from winter to summer time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.10 |
wtWebioAn8GraphStTzStartMinMinute in which the time zone is changed from winter to summer time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.11 |
wtWebioAn8GraphStTzStopMonthMonth in which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.12 |
wtWebioAn8GraphStTzStopModeMode of the week day on which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.13 |
wtWebioAn8GraphStTzStopWdayDay of the week on which the change is made from summer time to winter time.rw Enumeration .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.14 |
wtWebioAn8GraphStTzStopHrsHour at which the time zone is changed from summer to winter time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.15 |
wtWebioAn8GraphStTzStopMinMinute at which the time zone is changed from summer to winter time with
respect to UTC.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.1.16 |
wtWebioAn8GraphTimeServer OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.2.2 |
wtWebioAn8GraphTimeServer1IP address or name of the 1st time server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.2.2.1 |
wtWebioAn8GraphTimeServer2IP address or name of the 2nd time server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.2.2.2 |
wtWebioAn8GraphTsEnableBinary coded conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Apply Time Serverrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.2.2.3 |
wtWebioAn8GraphTsSyncTimeDaily synchronisation time with the time server (hour: 0-23).rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.2.4 |
wtWebioAn8GraphDeviceClock OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.2.3 |
wtWebioAn8GraphClockHrsClock hours taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.3.1 |
wtWebioAn8GraphClockMinClock minutes taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.3.2 |
wtWebioAn8GraphClockDayDate: Day of the month, taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.3.3 |
wtWebioAn8GraphClockMonthDate: Month, taking into account the time zone settings.rw Enumeration .1.3.6.1.4.1.5040.1.2.6.3.1.2.3.4 |
wtWebioAn8GraphClockYearDate: Year, taking into account the time zone settings.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.2.3.5 |
wtWebioAn8GraphBasic OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.3 |
wtWebioAn8GraphNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.3.1 |
wtWebioAn8GraphIpAddressIP address of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.6.3.1.3.1.1 |
wtWebioAn8GraphSubnetMaskSubnet mask of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.6.3.1.3.1.2 |
wtWebioAn8GraphGatewayGateway of the Webiorw IpAddress .1.3.6.1.4.1.5040.1.2.6.3.1.3.1.3 |
wtWebioAn8GraphDnsServer1IP address of the 1st DNS server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.1.4 |
wtWebioAn8GraphDnsServer2IP address of the 2nd DNS server in ASCIIrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.1.5 |
wtWebioAn8GraphAddConfigAdditional configuration (1=ON):
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: BOOTP disable
Bit 1: DHCP disablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.1.6 |
wtWebioAn8GraphHTTP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.3.2 |
wtWebioAn8GraphStartupBinary coded start page:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1: Index.htm
Bit 2: Home.htm
Bit 3: User.htm
Only one page may be selected at a time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.2.1 |
wtWebioAn8GraphGetHeaderEnableIf these bits are set, every answer of a short form GET question will be lead
by the IP-address and name of the device and/or a HTTP header:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-6: unused
Bit 1 : GET HTTP enable
Bit 0 : GET Header enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.2.2 |
wtWebioAn8GraphHttpPortDefinition of the standard HTML port (Default: 80).rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.3.2.3 |
wtWebioAn8GraphMail OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.3.3 |
wtWebioAn8GraphMailAdNameDevice name for mail administration.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.3.1 |
wtWebioAn8GraphMailReplyReply address for the mail server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.3.2 |
wtWebioAn8GraphMailServerName or IP address of the mail server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.3.3 |
wtWebioAn1MailEnableSet this bit to enable the sending of mails:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Mail enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.3.4 |
wtWebioAn8GraphMailAuthenticationSelection of the authentication modi:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : POP3 before SMTP
Bit 1 : ESMTP, authentication
Bit 0 : SMTP, no authenticationrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.3.5 |
wtWebioAn8GraphMailAuthUserName of the user to be authenticated.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.3.6 |
wtWebioAn8GraphMailAuthPasswordAuthentication password.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.3.7 |
wtWebioAn8GraphMailPop3ServerName or Ip-address of the POP3 Servers.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.3.8 |
wtWebioAn8GraphSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.3.4 |
wtWebioAn8GraphSnmpCommunityStringReadCommunity string read onlyrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.4.1 |
wtWebioAn8GraphSnmpCommunityStringReadWriteCommunity string read / writerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.4.2 |
wtWebioAn8GraphSystemTrapManagerIPName or IP address of the TCP server which accepts the system trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.4.3 |
wtWebioAn8GraphSystemTrapEnableBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: ColdStart
Bit 1: WarmStart
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.4.4 |
wtWebioAn8GraphSnmpEnableSet bit 0 to enable SNMP.
If disabled, the device did not respond to any SNMP requests.
Bit 1 decided wether the community string of read operations
is compared with the system password or not:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : SNMP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.4.5 |
wtWebioAn8GraphSnmpCommunityStringTrapCommunity string send within traps.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.4.6 |
wtWebioAn8GraphUDP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.3.5 |
wtWebioAn8GraphUdpPortUdp port to which the Udp queries ( short form GET requests) can be sent. This
port number must be unique within the device.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.3.5.1 |
wtWebioAn8GraphUdpEnableSet this bit to enable UDP support:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : UDP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.5.2 |
wtWebioAn8GraphSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.3.6 |
wtWebioAn8GraphSyslogServerIPName or IP address of the Syslog server, which accepts the Syslog messgaes.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.6.1 |
wtWebioAn8GraphSyslogServerPortPortnumber of the Syslog servers, default 514.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.3.6.2 |
wtWebioAn8GraphSyslogSystemMessagesEnableBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: ColdStart
Bit 1: WarmStart
Bit 2: Diag Messages
Bit 3-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.6.3 |
wtWebioAn8GraphSyslogEnableSet bit 0 to enable Syslog:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Syslog enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.6.4 |
wtWebioAn8GraphFTP OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.3.7 |
wtWebioAn8GraphFTPServerIPName or IP address of the FTP server, which accepts the FTP messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.7.1 |
wtWebioAn8GraphFTPServerControlPortPortnumber of the control port of the FTP server, default 21.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.3.7.2 |
wtWebioAn8GraphFTPUserNameFTP Loggin: user name.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.7.3 |
wtWebioAn8GraphFTPPasswordFTP Loggin: user password.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.7.4 |
wtWebioAn8GraphFTPAccountFTP Loggin: name of account.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.7.5 |
wtWebioAn8GraphFTPOptionBit 0 switches the FTP Server in Passiv-Mode,
the Client controls the data connection on its own:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : PASV enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.7.6 |
wtWebioAn8GraphFTPEnableSet Bit 0 to enable FTP:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : FTP enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.3.7.7 |
wtWebioAn8GraphDatalogger OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.4 |
wtWebioAn8GraphLoggerTimebaseTime base of the data loggerrw Enumeration .1.3.6.1.4.1.5040.1.2.6.3.1.4.1 |
wtWebioAn8GraphLoggerSensorSelBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2: Sensor 3
Bit 3: Sensor 4
Bit 4: Sensor 5
Bit 5: Sensor 6
Bit 6: Sensor 7
Bit 7: Sensor 8rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.4.2 |
wtWebioAn8GraphDisplaySensorSelBinary coded sensor selection:
only selected sensors will be shown in the graphical presentation:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2: Sensor 3
Bit 3: Sensor 4
Bit 4: Sensor 5
Bit 5: Sensor 6
Bit 6: Sensor 7
Bit 7: Sensor 8rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.4.3 |
wtWebioAn8GraphAutoScaleEnableIf bit 0 is set, vertical auto scale is enabled:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Auto Scale enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.4.5 |
wtWebioAn8GraphVerticalUpperLimitThis value defines the maximum temperature shown in the graphical presentation,
if no auto scaling is selected.
Temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.4.6 |
wtWebioAn8GraphVerticalLowerLimitThis value defines the minimum temperature shown in the graphical presentation,
if no auto scaling is selected.
Temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.4.7 |
wtWebioAn8GraphHorizontalZoomDefines the default zoom stage, if no auto scaling is selected.rw Enumeration .1.3.6.1.4.1.5040.1.2.6.3.1.4.8 |
wtWebioAn8GraphAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.5 |
wtWebioAn8GraphAlarmCountNumber of independent alarms.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.5.1 |
wtWebioAn8GraphAlarmIfTableList of alarm indices. SEQUENCE OF WtWebioAn8GraphAlarmIfEntry .1.3.6.1.4.1.5040.1.2.6.3.1.5.2 |
wtWebioAn8GraphAlarmIfEntryNumbers of the alarms. WtWebioAn8GraphAlarmIfEntry .1.3.6.1.4.1.5040.1.2.6.3.1.5.2.1 |
wtWebioAn8GraphAlarmNoAlarm number.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.5.2.1.1 |
wtWebioAn8GraphAlarmTableList of settings depending on the alarm number. SEQUENCE OF WtWebioAn8GraphAlarmEntry .1.3.6.1.4.1.5040.1.2.6.3.1.5.3 |
wtWebioAn8GraphAlarmEntryAlarm parameters of the individual alarms. WtWebioAn8GraphAlarmEntry .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1 |
wtWebioAn8GraphAlarmTriggerBinary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3:
Bit 0: Timer
Bit 1: ColdStart
Bit 2: WarmStart
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2: Sensor 3
Bit 3: Sensor 4
Bit 4: Sensor 5
Bit 5: Sensor 6
Bit 6: Sensor 7
Bit 7: Sensor 8rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.1 |
wtWebioAn8GraphAlarmMinMinimum temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.2 |
wtWebioAn8GraphAlarmMaxMaximum temperature in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.3 |
wtWebioAn8GraphAlarmHysteresisTemperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.)
, in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.4 |
wtWebioAn8GraphAlarmDelayAlarm will be delayed by setting this time while stable alarm
condition occur (time in minutes).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.5 |
wtWebioAn8GraphAlarmIntervalSend interval for alarm messages.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.6 |
wtWebioAn8GraphAlarmEnableBinary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Mail Enable
Bit 1: SNMP Trap enable
Bit 2: TCP Client enablerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.7 |
wtWebioAn8GraphAlarmEMailAddrE-Mail address for sending the alarm mail to.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.8 |
wtWebioAn8GraphAlarmMailSubjectSubject line for alarm mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.9 |
wtWebioAn8GraphAlarmMailTextAlarm mail text: <Tn> provides the current temperature; n = 1..8.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.10 |
wtWebioAn8GraphAlarmManagerIPName or IP address of the SNMP Manager which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.11 |
wtWebioAn8GraphAlarmTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.12 |
wtWebioAn8GraphAlarmMailOptionsBinary coded options:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Attach Thermo.csv Enable
Bit 1 : CSV-Data_since_last_report
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.13 |
wtWebioAn8GraphAlarmTcpIpAddrName or IP address of the TCP server which accepts the trap.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.14 |
wtWebioAn8GraphAlarmTcpPortPort number of the TCP server which accepts the trap.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.15 |
wtWebioAn8GraphAlarmTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.16 |
wtWebioAn8GraphAlarmClearMailSubjectSubject line for alarm clear mail.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.17 |
wtWebioAn8GraphAlarmClearMailTextAlarm clear mail text: <Tn> provides the current temperature; n = 1..8.
<Z> provides the current time.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.18 |
wtWebioAn8GraphAlarmClearTrapTextThis text is sent in the trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.19 |
wtWebioAn8GraphAlarmClearTcpTextThis text is sent in the TCP trap body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.20 |
wtWebioAn8GraphAlarmSyslogIpAddrIP address of the syslog server to which the Webio device should send syslog messages.rw IpAddress .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.21 |
wtWebioAn8GraphAlarmSyslogPortPort number of the syslog server to which the Webio device should send syslog messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.22 |
wtWebioAn8GraphAlarmSyslogTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.23 |
wtWebioAn8GraphAlarmSyslogClearTextEvery message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.24 |
wtWebioAn8GraphAlarmFtpDataPortLocal data port: 1..65535 or AUTO: the next free port will be assigned.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.25 |
wtWebioAn8GraphAlarmFtpFileNameName of the file including path informations.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.26 |
wtWebioAn8GraphAlarmFtpTextMessage text to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.27 |
wtWebioAn8GraphAlarmFtpClearTextAlarm clear message to store on the FTP server.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.28 |
wtWebioAn8GraphAlarmFtpOptionsBinary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : STORE
Bit 1 : APPEND
Bit 2-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.29 |
wtWebioAn8GraphAlarmTimerCronThis entry contains 5 text fields space or tab seperated for time trigger definition.
Each field must match with the actual time to trigger a message, weekday and day of month
are interpreted separatley.
1: Minutes Range 0-59
2. Hours Range 0-23, 0 is midnight
3: Day of month Range 1-31
4: Month Range 1-12
5: Weekday Range 0-6, 0 is sunday
Syntax for every field:
- an asterix (*) enables every possible setting of a field
- single numbers seperated by commas
- a partition within the allowed range (1-5)
- step size within an partition of the allowed range (0-59/2: every second minute).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.30 |
wtWebioAn8GraphGraphics OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.6 |
wtWebioAn8GraphGraphicsBase OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.6.1 |
wtWebioAn8GraphGraphicsBaseEnableDefines the viewing options of the graphic:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Auto scroll enable
Bit 1 : Show table
Bit 2 : Show graph
Bit 3 : Show control buttons
Bit 4 : Show config menu
Bit 5-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.1.1 |
wtWebioAn8GraphGraphicsBaseWidthDefines the width of the graphic in pixels.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.6.1.2 |
wtWebioAn8GraphGraphicsBaseHeightDefines the height of the graphic in pixels.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.6.1.3 |
wtWebioAn8GraphGraphicsBaseFrameColorFrame color definition in RGB.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.1.4 |
wtWebioAn8GraphGraphicsBaseBackgroundColorBackground color definition in RGB.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.1.5 |
wtWebioAn8GraphGraphicsBasePollingrateDefines the pollingrate in seconds,
which defines the refreshing intervall of the graphic.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.6.1.6 |
wtWebioAn8GraphGraphicsSelect OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.6.2 |
wtWebioAn8GraphGraphicsSelectDisplaySensorSelBinary coded sensor selection:
only selected sensors will be shown in the graphical presentation:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2: Sensor 3
Bit 3: Sensor 4
Bit 4: Sensor 5
Bit 5: Sensor 6
Bit 6: Sensor 7
Bit 7: Sensor 8rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.2.1 |
wtWebioAn8GraphGraphicsSelectDisplayShowExtremBinary coded sensor selection:
only selected sensors will be shown with minima and maxima:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2: Sensor 3
Bit 3: Sensor 4
Bit 4: Sensor 5
Bit 5: Sensor 6
Bit 6: Sensor 7
Bit 7: Sensor 8rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.2.2 |
wtWebioAn8GraphSensorColorTableList of sensor colors for the praphical presentation. SEQUENCE OF WtWebioAn8GraphSensorColorEntry .1.3.6.1.4.1.5040.1.2.6.3.1.6.2.3 |
wtWebioAn8GraphSensorColorEntryNumbers of the sensors. WtWebioAn8GraphSensorColorEntry .1.3.6.1.4.1.5040.1.2.6.3.1.6.2.3.1 |
wtWebioAn8GraphSensorColorColor of the sensors at the praphical presention.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.2.3.1.1 |
wtWebioAn8GraphGraphicsSensorColorColor of the sensors at the praphical presention.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.2.3.1.1 |
wtWebioAn8GraphGraphicsSelectScaleAssignes one of 4 scales to a sensor:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Use Scale 1
Bit 1 : Use Scale 2
Bit 2 : Use Scale 3
Bit 3 : Use Scale 4
Bit 4-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.2.3.1.2 |
wtWebioAn8GraphGraphicsScale OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.1.6.3 |
wtWebioAn8GraphGraphicsScaleAutoScaleEnableSelect the Auto Scale Mode:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Scale 1 Auto scale enable
Bit 1 : Scale 2 Auto scale enable
Bit 2 : Scale 3 Auto scale enable
Bit 3 : Scale 4 Auto scale enable
Bit 4-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.1 |
wtWebioAn8GraphGraphicsScaleAutoFitEnableSelect the Auto Fit Mode::
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Scale 1 Auto fit enable
Bit 1 : Scale 2 Auto fit enable
Bit 2 : Scale 3 Auto fit enable
Bit 3 : Scale 4 Auto fit enable
Bit 4-7: unusedrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.2 |
wtWebioAn8GraphGraphicsScale1MinScale 1: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.3 |
wtWebioAn8GraphGraphicsScale2MinScale 2: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.4 |
wtWebioAn8GraphGraphicsScale3MinScale 3: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.5 |
wtWebioAn8GraphGraphicsScale4MinScale 4: Minimum.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.6 |
wtWebioAn8GraphGraphicsScale1MaxScale 1: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.7 |
wtWebioAn8GraphGraphicsScale2MaxScale 2: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.8 |
wtWebioAn8GraphGraphicsScale3MaxScale 3: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.9 |
wtWebioAn8GraphGraphicsScale4MaxScale 4: Maximum.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.10 |
wtWebioAn8GraphGraphicsScale1UnitScale 1: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.11 |
wtWebioAn8GraphGraphicsScale2UnitScale 2: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.12 |
wtWebioAn8GraphGraphicsScale3UnitScale 3: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.13 |
wtWebioAn8GraphGraphicsScale4UnitScale 4: Unit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.1.6.3.14 |
wtWebioAn8GraphPorts OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.2 |
wtWebioAn8GraphPortTableList of settings depending on the sensor number. SEQUENCE OF WtWebioAn8GraphPortEntry .1.3.6.1.4.1.5040.1.2.6.3.2.1 |
wtWebioAn8GraphPortEntrySensor parameters for the individual sensors. WtWebioAn8GraphPortEntry .1.3.6.1.4.1.5040.1.2.6.3.2.1.1 |
wtWebioAn8GraphPortNameName of the sensor.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.2.1.1.1 |
wtWebioAn8GraphPortTextDescription of the sensor.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.2.1.1.2 |
wtWebioAn8GraphPortOffset1Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.2.1.1.3 |
wtWebioAn8GraphPortTemperature1Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.2.1.1.4 |
wtWebioAn8GraphPortOffset2Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.2.1.1.5 |
wtWebioAn8GraphPortTemperature2Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.2.1.1.6 |
wtWebioAn8GraphPortCommentOffset calibration: informations of date, name of operator, reference devices.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.2.1.1.7 |
wtWebioAn8GraphPortSensorSelectBinr kodierte Optionen fr Sensor:
Octet 1: ungenutzt
Octet 2: ungenutzt
Octet 3: ungenutzt
Octet 4:
Bit 0 : PT100
Bit 1 : PT1000 (default)
Bit 2-7: ungenutztrw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.2.1.1.8 |
wtWebioAn8GraphManufact OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.3.3 |
wtWebioAn8GraphMfNameManufacturer company namerw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.3.1 |
wtWebioAn8GraphMfAddrManufacturer address.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.3.2 |
wtWebioAn8GraphMfHotlineManufacturer hotline.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.3.3 |
wtWebioAn8GraphMfInternetManufacturer Internet address.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.3.4 |
wtWebioAn8GraphMfDeviceTypManufacturer device name (model number).rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.3.5 |
wtWebioAn8GraphMfOrderNoManufacturer part number.rw OCTET STRING .1.3.6.1.4.1.5040.1.2.6.3.3.6 |
wtWebioAn8GraphDiag OBJECT IDENTIFIER .1.3.6.1.4.1.5040.1.2.6.4 |
wtWebioAn8GraphDiagErrorCountNumber of entries in the error memory.ro INTEGER .1.3.6.1.4.1.5040.1.2.6.4.1 |
wtWebioAn8GraphDiagBinaryErrorError causes coded bit-by-bit.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.6.4.2 |
wtWebioAn8GraphDiagErrorIndexThe value of this variable is used as an index to read
an error massege from wtWebioAn8GraphDiagErrorMessage.
Errors are numbered from 1 to wtWebioAn8GraphDiagErrorCount.
Writing a valid value into this variable, making the appropriate
message readable from wtWebioAn8GraphDiagErrorMessage.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.4.3 |
wtWebioAn8GraphDiagErrorMessageUsing wtWebioAn8GraphDiagErrorIndex as an index, the appropriate message is available.ro OCTET STRING .1.3.6.1.4.1.5040.1.2.6.4.4 |
wtWebioAn8GraphDiagErrorClearWriting 1 into this variable clears all diagnosis messages.rw INTEGER .1.3.6.1.4.1.5040.1.2.6.4.5 |